Problem in rem
Dear pp guru!
I have faced one problem.how to activate reporting point backflush in rem profile.for a particular operation for example
EX: I have 10 operations.I want activate reporting point backflush for 5th operation.plz explain
Thanks
mnk
Hi Mnk Vekat.
To activate Reporting point, u have set optional or mandtoty reporting point at Rem profile and same should be assigned for Mrp view of materail.
For reporting point Opertaion u have set milestone control key indicator 1 (= milestone confirmation) at 5 th operation. All pervious opreations should have without milestone confirmation control key
Regards
pradeep
Similar Messages
-
Dispatching problem in REM Planning Table
Hi,
I have encountered a problem in REM planning Table, from REM planning table when i m accessing Bar char planning table and try to dispatch the planned order it is not dispatching the order. I have checked the scenario is previously it was working fine but now it is not working with same settings can u guide me tht which settings affect the planning table dispatch. neither it was showing the capacity requirements, i have maintained the rate formulas is work centre and formula was working fine, i doubt it relate to SPRO settings kinldy give me hints where i can check n wht standard settings i have to make for planning table..Plz give some suggestion on this....
-
Problem in REM Planning table.
Hi PP Gurus,
We created one material with REM profile 0004 with MRP1, 2, 3, 4, BD1, 2, Accounting 1, 2, Costing 1, 2 and Work scheduling views. In Work scheduling view weu2019ve not maintained any Production Scheduler and Production Scheduling Profile except Production storage location. Whenever weu2019re accessing Planning table (MF50) getting the errors
1. Date adjust. level incorrect: Plant 1001 /ord.type PE / prod.sched. *
2. No lead time scheduling: Plant 1001 / order type PE / prod.sched. *
3. No capa. data determined: Plant 1001 / Ord. type PE / Prod. sched. *
One more thing. If we donu2019t put any sales order OR PIR using MD61 Planning table is not showing any details in Material Data rows of Planning Table. And system is not allowing to create any Planned Order manually. What might be the problem?
If we put any Sales order or PIR using MD61 though the Rows in Material Data get visible but system is not showing any calculation changes in u2018Complete capacity datau2019 rows. We mean to say system is showing Available capacity but not showing any Required Capacity at Production line.
Thanks & Regards,
Abu ArbabHi,
In OPU5 Rate base scheduling active tick mark for scheduling and generate capacity with selection ID 02.
Scheduling level -rate-based scheduling
Scheduling type- Backward.
Then check the planning table section parameter
SPROProductionRepetitive ManufacturingPlanningPlanning Table--Maintain Entry Parameters.
Please check scheduling level and other parameters?
I hope u have not maintained any prod scheduler at work scheduling view.
Please change this and try again run MRP with planning mode -3 deleted and recreated with lead time scheduling and check the result
The production line what u have selected at planning table should be same with, production line define at "production version"
Regards,
R.Brahmankar -
Problem in REM Backflush in Repetetive Mfg
Hi
i got the following error when i try to run the REM BACKFLUSH in repetitive process. (MFBF)
" Update control of movement type is incorrect (entry 131 _ _ _ F)
Message no. M7226
Diagnosis
The system could not find entry 131 _ _ _ F in any of the movement type control tables."
if any body having any idea kindly guide me
Thanks in advance
sivaHi,
Good afternoon and greetings,
Please go through the following OSS Notes
Note 216633 - MB01: Error M7 226 for automatic PO
Please reward points if found useful
Thanking you,
With kindest regards
Ramesh Padmanabhan -
Separation of GI and GR in REM
Hi Experts,
I am having problem in REM for separtion of Gr from GI in backflush.
Clients want to do GR first and GI on next day for same planned order. I tried by removing tick for GR/GI backflush in REM profile. But it does not work. We can do either GR or GI only. If I do GR backflush, same planned order is not available for GI backflush on next day.
Is there need to use Process control profile in REM profile for separation of GR and GI backflush? If yes please provide me step by step process. or is there any other method?
Thanks,
MilHi,
For separating backflush process u have to define and assign the process control profile at REM profile.
Execute Good Issue at MF70 separately. i think u cannot execute the separating backflush for Planned order.
If u are working with MTS, u cannot execute the separating backflush with reference to the Planned order.Inthat case system will cumulate the GR quantity based on the selection criteria which u would have given at MF70 and will issue the components.
For more details please go through below sap Help.
[Separating the Backflushing Processes |http://help.sap.com/saphelp_47x200/helpdata/en/8a/a5aa1a4adc11d189740000e8322d00/content.htm]
Pradeep
Edited by: Pradeep Kumar on Jun 23, 2008 11:54 AM -
Hai gurus,
i have one small problem in rem costing.
1) i am having the job flow as Roh to halb to fert.
2) I had initially done standard cost estimate for fert using T.C CK11n and CK24, on doing this
cost is updated in costing view 2 under future cost.
3) The problem now is ,when i am doing MFBF for the fert the system through the error as
" No active standard cost estimate exist".
NOTE;
i had already done standard cost estimate for halb and also done MFBF for halb and the required qty
is available at storage location.
waiting for the positive feed back.
with regards,
sekar chandDear,
This error is dur to there is no standard cost estimate for current period of material.
I think u have not released the Std cost for Current period.
1. in CK11N , please ensure that the cost estimate is without errors (check the log and ensure that green colour light is turned on).
2. In CK24 , first mark the estimate.( ensure that the costing variant used in CK11N is the same used here for marking also) .Once the estimate is marked (check the status: Marked without errors)
then , release the estimate.(check the status: Released without errors)
3. Now check whether the price has been updated in Material master , in Costing2 view. (Only when mark & release is successful in CK24 , the price will be updated here).
Or for all material go ahead with CK40N
Regards,
R.Brahmankar -
During our tests with Oracle 9.0.1, we had problems to run some of the database scripts in $ORACLE_HOME/rdbms/admin (e.g. catproc.sql). We always got the error message:
ERROR:
ORA-06550: line 1, column 29:
PLS-00553: character set name is not recognized
ORA-06550: line 0, column 0:
PL/SQL: Compilation unit analysis terminated
Oracle has now found the Bug in 9.0.1 and assigned bug number: 1335603. This bug will be fixed in Oracle 9.0.2.
Workaround
After creating the database with CREATE DATABASE ...., disconnect and reconnect again, just before running the admin scripts, this solves the problem.
REM Load the system scripts
REM -----------------------
DISCONNECT;
CONNECT / AS SYSDBA;
SET ECHO ON;
You can download corrected create DB scripts from our site: www.akadia.comXSU currently doesn't have special handling for it? Would you help make sure if JDBC treat this like any other ADT? If not and you'd like XSU to support it. Please contact your Oracle support to file enhancement request.
-
ITunes won't open because it has an issue w/ Quick Time...
I went to use my new iPod Shuffle, and I got the above error message. I tried to uninstall and re-install quick-time, as recommended, but each time I do, it claims that an instillation of quick-time is already running. It goes on to say that I should complete that instillation before staring another one. The thing of it is, I installed both iTunes and quick-time a looooooooooooooooong time ago.
So here I am stuck, unable to remove/un-install quick-time, and so I also can't re-install it, or open iTunes, or use my new iPod. The only thing that I can think of is to tyr and remove itunes as well, the re-install them both. I am loathe to do this however, as I don't want the added headache of having to re-create my entire library after the fact...Sadly no... In point of fact, it seems that quicktime may not be the only culprit at work here. I tred method 1, 3, 4, & 5. I was able to finally remove the QT Systems folder, which contained the last vestiges of the old quick time program. The problem that remais, is even in trying to un-register then re-register the installer is the same for un & re-installing quick time. Apparently there is a program that is STILL in the process of being installed. It may have not been a duplicate, unfinished copy of quick time but of some other program instead. When I tried to un-register the installer, at first I got an 'unspecified error'. Then I got the 'an instillation is in progress, you must finish it before starting another one, etc, etc....' I think that I may have to either have someone try 'Method 11' instead, as it is Waaaaaaaaay beyond my limited abilities. That, or I may have to do a total system restore (after backing up all those lovely modifications and tweaks that I've made over the last 6 or 7 years, groan.... Either way it's gonna be a headache. Why is it that the windows installer doesn't allow teh user to monitor progress of any installs, and get rid of a stalled operation that's clogging the system? headdesk
-
Dear All
I am facing the problem during REM backflush.My material is handaled in batches where i also attached characteristics. But when i do backflush by MFBF system should ask for characterstics.but it is not asking.
plz help me out from this problem
thanks
KKDear,
SproLogistics general > Batch Management > Batch valuation > Valuation for Goods Movement in Inventory Management > Activate Batch Classification for Goods Movements3 Classification always in foreground all batches
Then go to SPROProductionRepetitive Manufacturing-Backflushing-Maintain Global Settings for Confirmation and LIS here you need to maintain Batch Classification Active.
If you wan users to enter the characteristics values mandatorily in the Batch Classification then in CT04 for these characteristics activate Entry required indicator in "Basic Data" Tab
SAP Note 519303
Regards,
R.Brahmankar -
Dear Gurus,
I am facing one problem in REM.10 planned orders are there ,I have done the production booking for 10 planned orders using MFBF.FG GR(131) has happened for 10 orders.So 10 material documents are created.The component is not there in stock.So it went to COGI.In COGI 10 errors are there.Now the component material has come for 10.When I clear cogi,only one material document is created eventhouh I have cleared for 10 error (for 10 planned orders).Now my requirement is to link the one material document (which I have cleared in COGI for 261) to 10 material document(131 FG).Through some light.Please let me know the table link.
Gideon .Dear Gideon,
I guess you must have executed COGI report with the option for summarized record(in the input screen) and however you can
choose the option for summarized or individual record option after executing to check the individual error quantity and reason
for the same material.
If executing in summarized mode,the system shows the splitup during posting or correcting the error records before posting
and in this case only one material document gets generated and to check the details,goto MB51 and execute for the
movement,plant,posting date,user name combination.
Double click on the document no and it displays the material document in detail view,where in you can check the 10 line
items,quantity against each item,and the respective order(production order).
In your case since it's REM related you may get only the product cost collector no as order no against each line item and you
may not get the planned order details.
Check and revert.
Regards
Mangalraj.S -
Consignment reversal from MFBF
Hi Guru's,
Please help.
Problem: In REM while doing good issue using MFBF transcation for consignment material system posting correctly with stock type K. But during reversal using MFBF Document neutral reversal tab system not put in back the consignment stock to the original consigenment place instead it is placing back to own stock.
Thx
SathiyaDocument neutral reversal
http://help.sap.com/erp2005_ehp_04/helpdata/EN/12/db12aac30311d1b59b0000e82d81c3/frameset.htm
You can use this function to reverse already backflushed quantities and activities.
Whereas document-specific reversal only allows you to reverse the complete quantity and activities contained in a backflush document, you can use the document-neutral reversal to partly reverse a backflush.
Document-neutral reversal is particularly useful if you separate the backflushing processes. When the backflushing processes are separated, all references to the original document are lost. Therefore, you have to reverse without referencing the document.
Since there's no connection with the original posting you cannot expect the system to find out (from nowhere) what to do. If ou want to post the goods back to their original stock segment you have to use "Document specific cancellation" function.
Regards,
Csaba -
Problems when creating a new instance of an Input parameter for a REM
I am working in a small demo which calls a Remote Enable Function Module in order to read data from the back end system. Since the function module I need to call ("BP_BUPA_SEARCH_BY_USER") is not Remote Enable I created a copy of it and made it Remote Enable ("Z_BUPA_SEARCH_BY_USER"). I have created the model within webdynpro without any problems but when my application reaches the line where I create a new instance of the object Z_Bupa_Search_By_User_Input (see below the source code), just before to call the remote function, the application stops there. I have exactly the same code in another bapi calls and it works fine. I am wondering if my problem has anything to do with the fact the function module i am calling is the function module I created. Any advice is very welcome.
Regards,
Diego.
Source Code:
msg.reportSuccess("------>>>"); "THIS LINE IS PRINTED
Z_Bupa_Search_By_User_Input searchByUser =
new Z_Bupa_Search_By_User_Input(); "PROGRAM STOPS HERE
msg.reportSuccess("<<<------"); "THIS LINE DOES NOT
wdContext.nodeZ_Bupa_Search_By_User_Input().bind(searchByUser);
msg.reportSuccess("<----
msg.reportSuccess("if (Internet_User != null)");
if (Internet_User != null) {
Usselmodbe ir_user = new Usselmodbe();
ir_user.setSign("I");
ir_user.setOption("EQ");
ir_user.setLow(Internet_User);
searchByUser.addIr_User(ir_user);Hi,
Try to get some more error info, e.g. like this:
try {
Z_Bupa_Search_By_User_Input searchByUser =
new Z_Bupa_Search_By_User_Input(); "PROGRAM STOPS HERE
} catch (Exception e) {
msg.raiseException(e.getMessage(), true);
msg.reportSuccess("<<<------"); "THIS LINE DOES NOT
good luck,
Roelof -
REM firmware problem in blade X6250
did anyone successfully upgraded the REM firmware inside a X6250 blade server, the REM that I have is of the following PN: 371-2658, I downloaded the SIA and tried to boot but the system hangs before launching the sia, also I tried to download the REM firmware packages from the SIA package and putted them on a bootable USB but when the afu.exe utility reads the files, it tells that the flash files does not match this controller!!
does anyone knows exactly where can I get the exact firmware of this specific REM (PN 371-2658),
thank you.
BR,I've found that FreeIPMI works fairly well with Sun Blade X6250, SP ver. 4.0.52 and BIOS ver. 1ADPI040. Caveats: a) You have to use the "-W authcap" workaround option. b) I can't get ipmiconsole to work.
Example:
# ipmipower -W authcap -h blade44-sp -u root -p changeme --stat
blade44-sp: on -
Hello, I'm not sure whether I'm posting in the correct section of the forums but anyway, here's the problem, after upgrading the system xfce started crashing randomly (It definitely crashes when I try to suspend first time, then it does it correctly). I took a look in Xorg and fglrx log files, they didn't contain any errors. However, dmesg listed a segfault of xfce4-session in libglib, is there any solution for that problem or I just have to wait until the upgrade. Also, I have and AMD E-450 APU, and a proprietary catalyst driver from catalyst-stable. Here is the output from dmesg (the segfault message is in the end):
[ 0.000000] PM: Registered nosave memory: 00000000afb64000 - 00000000afb6c000
[ 0.000000] PM: Registered nosave memory: 00000000afb6c000 - 00000000afb91000
[ 0.000000] PM: Registered nosave memory: 00000000afb91000 - 00000000afbd4000
[ 0.000000] PM: Registered nosave memory: 00000000afd47000 - 00000000afef7000
[ 0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
[ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
[ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[ 0.000000] e820: [mem 0xaff00000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s84544 r8192 d21952 u1048576
[ 0.000000] pcpu-alloc: s84544 r8192 d21952 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 966665
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lqx root=UUID=ee58701b-54f4-4a5e-a884-636f3ac8cb2f ro nomodeset usbcore.autosuspend=1 quiet usbcore.autosuspend=0 nomodeset nmi_watchdog=0 pcie_aspm=force
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3782720k/5242880k available (4438k kernel code, 1314812k absent, 145348k reserved, 2809k data, 640k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 1646.401 MHz processor
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3292.80 BogoMIPS (lpj=1646401)
[ 0.000010] pid_max: default: 32768 minimum: 301
[ 0.000063] Security Framework initialized
[ 0.000068] SELinux: Disabled at boot.
[ 0.000071] AppArmor: AppArmor disabled by boot time parameter
[ 0.000073] Yama: becoming mindful.
[ 0.000095] Mount-cache hash table entries: 256
[ 0.000418] tseg: 00aff00000
[ 0.000422] CPU: Physical Processor ID: 0
[ 0.000424] CPU: Processor Core ID: 0
[ 0.000426] mce: CPU supports 6 MCE banks
[ 0.000442] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 5
[ 0.000558] Freeing SMP alternatives: 16k freed
[ 0.002455] ACPI: Core revision 20121018
[ 0.015032] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.025024] smpboot: CPU0: AMD E-450 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
[ 0.126038] Performance Events: AMD PMU driver.
[ 0.126044] ... version: 0
[ 0.126047] ... bit width: 48
[ 0.126048] ... generic registers: 4
[ 0.126050] ... value mask: 0000ffffffffffff
[ 0.126051] ... max period: 00007fffffffffff
[ 0.126053] ... fixed-purpose events: 0
[ 0.126054] ... event mask: 000000000000000f
[ 0.134178] smpboot: Booting Node 0, Processors #1 OK
[ 0.147430] Brought up 2 CPUs
[ 0.147435] smpboot: Total of 2 processors activated (6585.60 BogoMIPS)
[ 0.148250] devtmpfs: initialized
[ 0.148666] PM: Registering ACPI NVS region [mem 0xafaf7000-0xafb3efff] (294912 bytes)
[ 0.148681] PM: Registering ACPI NVS region [mem 0xafb49000-0xafb4bfff] (12288 bytes)
[ 0.148683] PM: Registering ACPI NVS region [mem 0xafb4d000-0xafb4dfff] (4096 bytes)
[ 0.148686] PM: Registering ACPI NVS region [mem 0xafb64000-0xafb6bfff] (32768 bytes)
[ 0.148689] PM: Registering ACPI NVS region [mem 0xafb91000-0xafbd3fff] (274432 bytes)
[ 0.149151] regulator-dummy: no parameters
[ 0.149293] NET: Registered protocol family 16
[ 0.150271] ACPI: bus type pci registered
[ 0.150593] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.150599] PCI: not using MMCONFIG
[ 0.150601] PCI: Using configuration type 1 for base access
[ 0.150602] PCI: Using configuration type 1 for extended access
[ 0.155916] bio: create slab <bio-0> at 0
[ 0.156315] ACPI: Added _OSI(Module Device)
[ 0.156319] ACPI: Added _OSI(Processor Device)
[ 0.156321] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.156323] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.158103] ACPI: EC: Look up EC in DSDT
[ 0.160056] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.172510] ACPI: Interpreter enabled
[ 0.172527] ACPI: (supports S0 S3 S4 S5)
[ 0.172576] ACPI: Using IOAPIC for interrupt routing
[ 0.172886] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.172961] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.213033] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.213391] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.245487] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.245850] ACPI: No dock devices found.
[ 0.245858] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.246163] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.246166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.246887] PCI host bridge to bus 0000:00
[ 0.246895] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.246899] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.246906] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.246910] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.246913] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.246916] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.246919] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.246923] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.246938] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.246999] pci 0000:00:01.0: [1002:9806] type 00 class 0x030000
[ 0.247013] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.247023] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
[ 0.247032] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.247093] pci 0000:00:01.0: supports D1 D2
[ 0.247118] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.247130] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
[ 0.247202] pci 0000:00:01.1: supports D1 D2
[ 0.247388] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[ 0.247482] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.247576] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.247602] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
[ 0.247615] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
[ 0.247629] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
[ 0.247642] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
[ 0.247655] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
[ 0.247669] pci 0000:00:11.0: reg 24: [mem 0xfeb4d000-0xfeb4d3ff]
[ 0.247749] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.247767] pci 0000:00:12.0: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
[ 0.247863] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.247889] pci 0000:00:12.2: reg 10: [mem 0xfeb4b000-0xfeb4b0ff]
[ 0.247997] pci 0000:00:12.2: supports D1 D2
[ 0.248000] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.248033] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.248052] pci 0000:00:13.0: reg 10: [mem 0xfeb4a000-0xfeb4afff]
[ 0.248150] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.248175] pci 0000:00:13.2: reg 10: [mem 0xfeb49000-0xfeb490ff]
[ 0.248289] pci 0000:00:13.2: supports D1 D2
[ 0.248292] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.248325] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.248433] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.248461] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.248548] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.248571] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.248673] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.248732] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.248750] pci 0000:00:14.5: reg 10: [mem 0xfeb48000-0xfeb48fff]
[ 0.248848] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.248953] pci 0000:00:15.0: supports D1 D2
[ 0.248991] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.249095] pci 0000:00:15.1: supports D1 D2
[ 0.249133] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
[ 0.249237] pci 0000:00:15.2: supports D1 D2
[ 0.249282] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
[ 0.249387] pci 0000:00:15.3: supports D1 D2
[ 0.249426] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.249474] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.249518] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.249564] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.249621] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.249665] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.249711] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.249755] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.249928] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.250055] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.250067] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.250070] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.250074] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.250077] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.250080] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.250083] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.250086] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.250216] pci 0000:03:00.0: [14e4:4727] type 00 class 0x028000
[ 0.250259] pci 0000:03:00.0: reg 10: [mem 0xfea00000-0xfea03fff 64bit]
[ 0.250422] pci 0000:03:00.0: supports D1 D2
[ 0.250425] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.252383] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.252400] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.252481] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.252587] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.252610] pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.252649] pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.252674] pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.252777] pci 0000:05:00.0: supports D1 D2
[ 0.252780] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254339] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.254353] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
[ 0.254369] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.254451] pci 0000:00:15.3: PCI bridge to [bus 06]
[ 0.254501] pci_bus 0000:00: on NUMA node 0
[ 0.254602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 0.254674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
[ 0.254726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
[ 0.254777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE23._PRT]
[ 0.254856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.254913] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.254916] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.259554] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.259704] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.259814] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.259920] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.260007] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.260075] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.260142] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.260210] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.260719] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.260732] vgaarb: loaded
[ 0.260733] vgaarb: bridge control possible 0000:00:01.0
[ 0.261239] ACPI: bus type usb registered
[ 0.261372] usbcore: registered new interface driver usbfs
[ 0.261438] usbcore: registered new interface driver hub
[ 0.261565] usbcore: registered new device driver usb
[ 0.262092] PCI: Using ACPI for IRQ routing
[ 0.273018] PCI: pci_cache_line_size set to 64 bytes
[ 0.273142] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.273146] e820: reserve RAM buffer [mem 0xafaf7000-0xafffffff]
[ 0.273149] e820: reserve RAM buffer [mem 0xafb54000-0xafffffff]
[ 0.273151] e820: reserve RAM buffer [mem 0xafd47000-0xafffffff]
[ 0.273154] e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
[ 0.273543] NetLabel: Initializing
[ 0.273546] NetLabel: domain hash size = 128
[ 0.273547] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.273565] NetLabel: unlabeled traffic allowed by default
[ 0.273680] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.273687] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.275723] Switching to clocksource hpet
[ 0.281493] pnp: PnP ACPI init
[ 0.281511] ACPI: bus type pnp registered
[ 0.281854] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.281861] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.282965] system 00:01: [io 0x040b] has been reserved
[ 0.282969] system 00:01: [io 0x04d6] has been reserved
[ 0.282972] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.282979] system 00:01: [io 0x0c14] has been reserved
[ 0.282984] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.282987] system 00:01: [io 0x0c52] has been reserved
[ 0.282990] system 00:01: [io 0x0c6c] has been reserved
[ 0.282994] system 00:01: [io 0x0c6f] has been reserved
[ 0.282997] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.283000] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.283004] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.283007] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.283010] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.283014] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.283017] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.283020] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.283024] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.283027] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.283033] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.283037] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.283041] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.283045] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.283049] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.283054] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.283057] system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.283062] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.283085] pnp 00:02: [dma 4]
[ 0.283236] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.283356] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.283484] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.283686] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.283691] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.283937] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.284106] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.284264] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.284487] pnp 00:09: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[ 0.285108] system 00:0a: [mem 0xb0000000-0xbfffffff] has been reserved
[ 0.285113] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297800] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.297811] pnp: PnP ACPI: found 12 devices
[ 0.297813] ACPI: ACPI bus type pnp unregistered
[ 0.303106] pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.303114] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.303119] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.303173] pci 0000:00:15.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.303178] pci 0000:00:15.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.303192] pci 0000:00:15.1: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.303196] pci 0000:00:15.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.303200] pci 0000:00:15.1: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.303213] pci 0000:00:15.2: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 400000
[ 0.303226] pci 0000:00:15.3: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.303230] pci 0000:00:15.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
[ 0.303234] pci 0000:00:15.3: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000
[ 0.303253] pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.303257] pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.303261] pci 0000:00:15.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.303264] pci 0000:00:15.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.303268] pci 0000:00:15.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.303271] pci 0000:00:15.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.303275] pci 0000:00:15.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.303278] pci 0000:00:15.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.303281] pci 0000:00:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.303285] pci 0000:00:15.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.303288] pci 0000:00:15.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.303291] pci 0000:00:15.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.303300] pci 0000:00:04.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
[ 0.303305] pci 0000:00:04.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.303310] pci 0000:00:15.0: BAR 15: assigned [mem 0xd0500000-0xd06fffff 64bit pref]
[ 0.303315] pci 0000:00:15.1: BAR 14: assigned [mem 0xd0700000-0xd08fffff]
[ 0.303320] pci 0000:00:15.1: BAR 15: assigned [mem 0xd0900000-0xd0afffff 64bit pref]
[ 0.303324] pci 0000:00:15.2: BAR 14: assigned [mem 0xd0b00000-0xd0efffff]
[ 0.303328] pci 0000:00:15.3: BAR 14: assigned [mem 0xd0f00000-0xd10fffff]
[ 0.303332] pci 0000:00:15.3: BAR 15: assigned [mem 0xd1100000-0xd12fffff 64bit pref]
[ 0.303339] pci 0000:00:04.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.303345] pci 0000:00:15.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.303349] pci 0000:00:15.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.303354] pci 0000:00:15.3: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.303361] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.303367] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.303373] pci 0000:00:04.0: bridge window [mem 0xd0100000-0xd02fffff]
[ 0.303378] pci 0000:00:04.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.303385] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.303470] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.303474] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
[ 0.303481] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.303487] pci 0000:00:15.0: bridge window [mem 0xd0500000-0xd06fffff 64bit pref]
[ 0.303495] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.303499] pci 0000:00:15.1: bridge window [io 0x3000-0x3fff]
[ 0.303506] pci 0000:00:15.1: bridge window [mem 0xd0700000-0xd08fffff]
[ 0.303512] pci 0000:00:15.1: bridge window [mem 0xd0900000-0xd0afffff 64bit pref]
[ 0.303521] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.303525] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
[ 0.303532] pci 0000:00:15.2: bridge window [mem 0xd0b00000-0xd0efffff]
[ 0.303537] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.303545] pci 0000:00:15.3: PCI bridge to [bus 06]
[ 0.303549] pci 0000:00:15.3: bridge window [io 0x4000-0x4fff]
[ 0.303557] pci 0000:00:15.3: bridge window [mem 0xd0f00000-0xd10fffff]
[ 0.303562] pci 0000:00:15.3: bridge window [mem 0xd1100000-0xd12fffff 64bit pref]
[ 0.303627] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.303631] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.303634] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.303637] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.303640] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.303643] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.303647] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.303650] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.303653] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
[ 0.303656] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.303660] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.303663] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.303666] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.303669] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
[ 0.303672] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.303675] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.303678] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.303681] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.303684] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.303687] pci_bus 0000:03: resource 2 [mem 0xd0500000-0xd06fffff 64bit pref]
[ 0.303691] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.303693] pci_bus 0000:04: resource 1 [mem 0xd0700000-0xd08fffff]
[ 0.303752] pci_bus 0000:04: resource 2 [mem 0xd0900000-0xd0afffff 64bit pref]
[ 0.303755] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.303758] pci_bus 0000:05: resource 1 [mem 0xd0b00000-0xd0efffff]
[ 0.303761] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.303765] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
[ 0.303768] pci_bus 0000:06: resource 1 [mem 0xd0f00000-0xd10fffff]
[ 0.303771] pci_bus 0000:06: resource 2 [mem 0xd1100000-0xd12fffff 64bit pref]
[ 0.303836] NET: Registered protocol family 2
[ 0.304049] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.304316] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.304574] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.304683] TCP: reno registered
[ 0.304693] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.304845] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.305013] NET: Registered protocol family 1
[ 0.305042] pci 0000:00:01.0: Boot video device
[ 0.305384] PCI: CLS 64 bytes, default 64
[ 0.305471] Unpacking initramfs...
[ 0.400016] Freeing initrd memory: 2664k freed
[ 0.401721] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.401733] software IO TLB [mem 0xabaf7000-0xafaf7000] (64MB) mapped at [ffff8800abaf7000-ffff8800afaf6fff]
[ 0.401984] LVT offset 0 assigned for vector 0x400
[ 0.402067] perf: AMD IBS detected (0x000000ff)
[ 0.402950] audit: initializing netlink socket (disabled)
[ 0.402971] type=2000 audit(1367137456.294:1): initialized
[ 0.403912] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.410965] VFS: Disk quotas dquot_6.5.2
[ 0.411207] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.411535] msgmni has been set to 7393
[ 0.412281] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.412285] io scheduler noop registered
[ 0.412287] io scheduler deadline registered
[ 0.412295] io scheduler cfq registered
[ 0.412435] io scheduler bfq registered (default)
[ 0.413822] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.415487] Linux agpgart interface v0.103
[ 0.415820] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.415822] vesafb: scrolling: redraw
[ 0.415826] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.416298] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010100000, using 3072k, total 3072k
[ 0.477778] Console: switching to colour frame buffer device 128x48
[ 0.530645] fb0: VESA VGA frame buffer device
[ 0.530917] ACPI: acpi_idle registered with cpuidle
[ 0.557297] GHES: HEST is not enabled!
[ 0.557305] XENFS: not registering filesystem on non-xen platform
[ 0.557737] libphy: Fixed MDIO Bus: probed
[ 0.557999] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
[ 0.561580] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.561601] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.562037] mousedev: PS/2 mouse device common for all mice
[ 0.562175] cpuidle: using governor ladder
[ 0.562284] cpuidle: using governor menu
[ 0.562288] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.562699] TCP: vegas registered
[ 0.562701] TCP: yeah registered
[ 0.562786] Key type dns_resolver registered
[ 0.563728] registered taskstats version 1
[ 0.564483] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.564936] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
[ 0.566831] acpi-cpufreq: overriding BIOS provided _PSD data
[ 0.567786] Freeing unused kernel memory: 640k freed
[ 0.568164] CFS CPU scheduler.
[ 0.584465] systemd-udevd[507]: starting version 202
[ 0.653357] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.655531] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.655963] ehci-pci: EHCI PCI platform driver
[ 0.656097] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.656109] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 0.656128] QUIRK: Enable AMD PLL fix
[ 0.656224] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4c000
[ 0.657747] SCSI subsystem initialized
[ 0.661333] ACPI: bus type scsi registered
[ 0.665103] libata version 3.00 loaded.
[ 0.711249] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.711257] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.711260] usb usb1: Product: OHCI Host Controller
[ 0.711263] usb usb1: Manufacturer: Linux 3.8.8-1-lqx ohci_hcd
[ 0.711266] usb usb1: SerialNumber: 0000:00:12.0
[ 0.711963] hub 1-0:1.0: USB hub found
[ 0.711978] hub 1-0:1.0: 5 ports detected
[ 0.712324] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.712335] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
[ 0.712343] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.712361] ehci-pci 0000:00:12.2: debug port 1
[ 0.712428] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4b000
[ 0.718188] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.718242] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.718249] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.718255] usb usb2: Product: EHCI Host Controller
[ 0.718260] usb usb2: Manufacturer: Linux 3.8.8-1-lqx ehci_hcd
[ 0.718264] usb usb2: SerialNumber: 0000:00:12.2
[ 0.718762] hub 2-0:1.0: USB hub found
[ 0.718770] hub 2-0:1.0: 5 ports detected
[ 0.719034] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.719043] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 0.719061] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.719099] ehci-pci 0000:00:13.2: debug port 1
[ 0.719142] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb49000
[ 0.725166] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.725211] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.725218] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.725224] usb usb3: Product: EHCI Host Controller
[ 0.725230] usb usb3: Manufacturer: Linux 3.8.8-1-lqx ehci_hcd
[ 0.725235] usb usb3: SerialNumber: 0000:00:13.2
[ 0.725648] hub 3-0:1.0: USB hub found
[ 0.725656] hub 3-0:1.0: 5 ports detected
[ 0.725886] ahci 0000:00:11.0: version 3.0
[ 0.726156] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.726162] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 0.730354] scsi0 : ahci
[ 0.730816] scsi1 : ahci
[ 0.731197] scsi2 : ahci
[ 0.731481] scsi3 : ahci
[ 0.731816] scsi4 : ahci
[ 0.732139] scsi5 : ahci
[ 0.732460] ata1: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d100 irq 19
[ 0.732464] ata2: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d180 irq 19
[ 0.732468] ata3: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d200 irq 19
[ 0.732471] ata4: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d280 irq 19
[ 0.732475] ata5: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d300 irq 19
[ 0.732478] ata6: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d380 irq 19
[ 0.732661] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.732683] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 0.732720] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4a000
[ 0.787137] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.787142] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.787145] usb usb4: Product: OHCI Host Controller
[ 0.787148] usb usb4: Manufacturer: Linux 3.8.8-1-lqx ohci_hcd
[ 0.787151] usb usb4: SerialNumber: 0000:00:13.0
[ 0.787659] hub 4-0:1.0: USB hub found
[ 0.787670] hub 4-0:1.0: 5 ports detected
[ 0.787909] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 0.787918] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 0.787944] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb48000
[ 0.842042] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.842046] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.842049] usb usb5: Product: OHCI Host Controller
[ 0.842052] usb usb5: Manufacturer: Linux 3.8.8-1-lqx ohci_hcd
[ 0.842054] usb usb5: SerialNumber: 0000:00:14.5
[ 0.842401] hub 5-0:1.0: USB hub found
[ 0.842410] hub 5-0:1.0: 2 ports detected
[ 1.036735] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.036809] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.037712] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.037754] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.037797] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.121601] usb 2-5: new high-speed USB device number 3 using ehci-pci
[ 1.191503] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.197711] ata1.00: ATA-8: ST500LM012 HN-M500MBB, 2AR10002, max UDMA/133
[ 1.197719] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.203906] ata1.00: configured for UDMA/133
[ 1.204335] scsi 0:0:0:0: Direct-Access ATA ST500LM012 HN-M5 2AR1 PQ: 0 ANSI: 5
[ 1.212034] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.212041] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.212125] sd 0:0:0:0: [sda] Write Protect is off
[ 1.212130] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.212166] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.239240] usb 2-5: New USB device found, idVendor=12d1, idProduct=1506
[ 1.239251] usb 2-5: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 1.239257] usb 2-5: Product: HUAWEI Mobile
[ 1.239263] usb 2-5: Manufacturer: Huawei Technologies
[ 1.239601] sda: sda1 sda2 sda3 sda4
[ 1.241058] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.248373] Initializing USB Mass Storage driver...
[ 1.248653] scsi6 : usb-storage 2-5:1.5
[ 1.249032] scsi7 : usb-storage 2-5:1.6
[ 1.250887] usbcore: registered new interface driver usb-storage
[ 1.250892] USB Mass Storage support registered.
[ 1.346272] usb 3-4: new high-speed USB device number 2 using ehci-pci
[ 1.402164] tsc: Refined TSC clocksource calibration: 1646.493 MHz
[ 1.402180] Switching to clocksource tsc
[ 1.463721] usb 3-4: New USB device found, idVendor=2232, idProduct=1020
[ 1.463730] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.463737] usb 3-4: Product: WebCam SC-0311139N
[ 1.463743] usb 3-4: Manufacturer: Image Processor
[ 1.463748] usb 3-4: SerialNumber: SM3711
[ 1.690741] usb 1-3: new full-speed USB device number 2 using ohci_hcd
[ 1.847612] usb 1-3: New USB device found, idVendor=0a5c, idProduct=219c
[ 1.847624] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.847631] usb 1-3: Product: Broadcom BCM2070 Bluetooth Device
[ 1.847637] usb 1-3: Manufacturer: Broadcom Corp
[ 1.847642] usb 1-3: SerialNumber: 30144A229E4B
[ 2.058659] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.250157] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 2.250876] scsi 7:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2
[ 2.302154] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 2.827197] systemd[1]: systemd 202 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.065305] systemd[1]: Inserted module 'autofs4'
[ 3.083044] systemd[1]: Set hostname to <REM>.
[ 3.104478] systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
[ 3.673989] systemd[1]: logged here: 'Support for option SysVStartPriority= has been disabled at compile time and is ignored': 0
[ 3.928323] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.928445] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.928473] systemd[1]: Starting Remote File Systems.
[ 3.928499] systemd[1]: Reached target Remote File Systems.
[ 3.928520] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.928571] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.928589] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.928636] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.928654] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.928708] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.928727] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.928777] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.928798] systemd[1]: Starting Encrypted Volumes.
[ 3.928818] systemd[1]: Reached target Encrypted Volumes.
[ 3.928949] systemd[1]: Starting udev Kernel Socket.
[ 3.928994] systemd[1]: Listening on udev Kernel Socket.
[ 3.929083] systemd[1]: Starting udev Control Socket.
[ 3.929127] systemd[1]: Listening on udev Control Socket.
[ 3.929179] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.929401] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.929433] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.929511] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.929537] systemd[1]: Starting Journal Socket.
[ 3.929627] systemd[1]: Listening on Journal Socket.
[ 3.929668] systemd[1]: Mounting Debug File System...
[ 3.941501] systemd[1]: Starting Setup Virtual Console...
[ 3.948777] systemd[1]: Starting udev Coldplug all Devices...
[ 4.302692] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.302896] systemd[1]: Starting Create static device nodes in /dev...
[ 4.311080] systemd[1]: Mounting Huge Pages File System...
[ 4.333926] systemd[1]: Starting Apply Kernel Variables...
[ 4.344029] systemd[1]: Starting Journal Service...
[ 4.354053] systemd[1]: Started Journal Service.
[ 4.354159] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.398484] systemd[1]: Starting Load Kernel Modules...
[ 4.405897] systemd[1]: Expecting device dev-sda2.device...
[ 4.405958] systemd[1]: Started File System Check on Root Device.
[ 4.405985] systemd[1]: Mounting Temporary Directory...
[ 4.444783] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.141813] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=15
[ 5.523573] vboxdrv: Found 2 processor cores.
[ 5.523876] vboxdrv: fAsync=0 offMin=0x37b offMax=0x21cc
[ 5.524228] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 5.524230] vboxdrv: Successfully loaded version 4.2.12_OSE (interface 0x001a0004).
[ 5.585084] systemd-udevd[1417]: starting version 202
[ 6.551072] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 6.551149] ACPI: Lid Switch [LID]
[ 6.551279] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 6.551286] ACPI: Power Button [PWRB]
[ 6.551432] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 6.551436] ACPI: Sleep Button [SLPB]
[ 6.551556] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.551560] ACPI: Power Button [PWRF]
[ 6.557442] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.570168] ACPI: AC Adapter [ADP1] (on-line)
[ 6.576119] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 6.581379] acpi device:31: registered as cooling_device2
[ 6.581414] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 6.581535] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5
[ 6.685232] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.685246] ACPI: Battery Slot [BAT1] (battery present)
[ 6.830273] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.830383] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 7.576782] [drm] Initialized drm 1.1.0 20060810
[ 7.618495] [drm] VGACON disable radeon kernel modesetting.
[ 7.620005] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.620007] [drm] No driver support for vblank timestamp query.
[ 7.620012] [drm] Initialized radeon 1.33.0 20080528 for 0000:00:01.0 on minor 0
[ 7.767784] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 7.767790] Disabling lock debugging due to kernel taint
[ 7.783921] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3540 MBytes.
[ 7.784096] <6>[fglrx] vendor: 1002 device: 9806 count: 1
[ 7.784621] <6>[fglrx] ioport: bar 1, base 0xf000, size: 0x100
[ 7.785024] <6>[fglrx] Kernel PAT support is enabled
[ 7.785057] <6>[fglrx] module loaded - fglrx 9.1.11 [Dec 19 2012] with 1 minors
[ 8.571990] Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k
[ 10.299762] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 10.935682] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[ 10.950057] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x16, 0x0a.
[ 11.022649] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[ 11.032941] microcode: CPU0: patch_level=0x05000101
[ 14.667774] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 14.684494] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 14.684678] sp5100_tco: PCI Revision ID: 0x42
[ 14.684818] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 14.684869] sp5100_tco: Last reboot was not triggered by watchdog.
[ 14.685016] sp5100_tco: initialized (0xffffc9000003eb00). heartbeat=60 sec (nowayout=0)
[ 14.913699] systemd-logind[1501]: Watching system buttons on /dev/input/event1 (Lid Switch)
[ 14.914754] systemd-logind[1501]: Watching system buttons on /dev/input/event2 (Power Button)
[ 14.915967] systemd-logind[1501]: Watching system buttons on /dev/input/event3 (Sleep Button)
[ 14.916946] systemd-logind[1501]: Watching system buttons on /dev/input/event4 (Power Button)
[ 14.925385] systemd-logind[1501]: Watching system buttons on /dev/input/event5 (Video Bus)
[ 14.993314] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 14.993343] microcode: CPU1: patch_level=0x05000101
[ 14.994827] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 15.200573] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 15.200964] r8169 0000:05:00.0: irq 40 for MSI/MSI-X
[ 15.204405] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000034000, 50:b7:c3:02:d7:05, XID 0c900800 IRQ 40
[ 15.204413] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 15.290455] systemd-udevd[1420]: renamed network interface eth0 to enp5s0
[ 15.292678] systemd-sysctl[2033]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 15.404438] samsung_laptop: detected SABI interface: SwSmi@
[ 15.404444] samsung_laptop: Backlight controlled by ACPI video driver
[ 15.452716] fglrx_pci 0000:00:01.0: irq 41 for MSI/MSI-X
[ 15.453760] <6>[fglrx] Firegl kernel thread PID: 2044
[ 15.453957] <6>[fglrx] Firegl kernel thread PID: 2045
[ 15.454361] <6>[fglrx] Firegl kernel thread PID: 2046
[ 15.454513] <6>[fglrx] IRQ 41 Enabled
[ 15.459141] <6>[fglrx] Gart USWC size:1156 M.
[ 15.459145] <6>[fglrx] Gart cacheable size:458 M.
[ 15.459152] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 15.459154] <6>[fglrx] Reserved FB block: Unshared offset:fc54000, size:3a0000
[ 15.459157] <6>[fglrx] Reserved FB block: Unshared offset:fff4000, size:c000
[ 15.461998] systemd-sysctl[2047]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 15.698292] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 16.424442] kvm: Nested Virtualization enabled
[ 16.424448] kvm: Nested Paging enabled
[ 16.499708] cfg80211: Calling CRDA to update world regulatory domain
[ 16.716267] Bluetooth: Core ver 2.16
[ 16.718230] NET: Registered protocol family 31
[ 16.718232] Bluetooth: HCI device and connection manager initialized
[ 16.718245] Bluetooth: HCI socket layer initialized
[ 16.718249] Bluetooth: L2CAP socket layer initialized
[ 16.718259] Bluetooth: SCO socket layer initialized
[ 16.733212] media: Linux media interface: v0.10
[ 16.782160] lib80211: common routines for IEEE802.11 drivers
[ 16.782166] lib80211_crypt: registered algorithm 'NULL'
[ 16.784149] Linux video capture interface: v2.00
[ 16.815091] usbcore: registered new interface driver usbserial
[ 16.816124] usbcore: registered new interface driver usbserial_generic
[ 16.817094] usbserial: USB Serial support registered for generic
[ 16.906678] usbcore: registered new interface driver option
[ 16.909342] usbserial: USB Serial support registered for GSM modem (1-port)
[ 16.909431] option 2-5:1.0: GSM modem (1-port) converter detected
[ 16.912145] usb 2-5: GSM modem (1-port) converter now attached to ttyUSB0
[ 16.912225] option 2-5:1.3: GSM modem (1-port) converter detected
[ 16.915130] usb 2-5: GSM modem (1-port) converter now attached to ttyUSB1
[ 16.915190] option 2-5:1.4: GSM modem (1-port) converter detected
[ 16.921982] usb 2-5: GSM modem (1-port) converter now attached to ttyUSB2
[ 16.986926] systemd-udevd[1427]: error opening ATTR{/sys/devices/pci0000:00/0000:00:12.2/usb2/2-5/2-5:1.5/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory
[ 16.988089] uvcvideo: Found UVC 1.00 device WebCam SC-0311139N (2232:1020)
[ 16.993277] systemd-udevd[1428]: error opening ATTR{/sys/devices/pci0000:00/0000:00:12.2/usb2/2-5/2-5:1.6/host7/scsi_host/host7/link_power_management_policy} for writing: No such file or directory
[ 17.002663] input: WebCam SC-0311139N as /devices/pci0000:00/0000:00:13.2/usb3/3-4/3-4:1.0/input/input8
[ 17.011802] usbcore: registered new interface driver uvcvideo
[ 17.011808] USB Video Class driver (1.1.1)
[ 17.036157] snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
[ 17.055032] usbcore: registered new interface driver cdc_wdm
[ 17.076782] qmi_wwan 2-5:1.1: cdc-wdm0: USB WDM device
[ 17.085492] qmi_wwan 2-5:1.1 wwan0: register 'qmi_wwan' at usb-0000:00:12.2-5, WWAN/QMI device, 02:50:f3:00:00:00
[ 17.088340] usbcore: registered new interface driver qmi_wwan
[ 17.173910] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[ 17.402599] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 17.546699] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 17.549997] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 17.554480] lib80211_crypt: registered algorithm 'TKIP'
[ 17.557087] eth0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.112
[ 17.587070] sr0: scsi-1 drive
[ 17.587077] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 17.590908] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 17.764781] systemd-udevd[1426]: renamed network interface wwan0 to wwp0s18f2u5i1
[ 17.767245] systemd-sysctl[2747]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 17.772802] systemd-udevd[1427]: renamed network interface eth0 to wlp3s0
[ 17.776265] systemd-sysctl[2756]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 17.780048] systemd-sysctl[2755]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 17.786438] systemd-sysctl[2759]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 18.086526] usbcore: registered new interface driver btusb
[ 18.769655] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880136590af8 (20121018/exresop-422)
[ 18.769669] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[ 18.769676] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff88013b4343e8), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 18.769691] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff88013b434168), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 20.495319] vboxpci: IOMMU not found (not registered)
[ 22.447778] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.447784] Bluetooth: BNEP filters: protocol multicast
[ 22.447799] Bluetooth: BNEP socket layer initialized
[ 22.595480] Bluetooth: RFCOMM TTY layer initialized
[ 22.595500] Bluetooth: RFCOMM socket layer initialized
[ 22.595502] Bluetooth: RFCOMM ver 1.11
[ 24.407804] r8169 0000:05:00.0 enp5s0: link down
[ 24.815261] NET: Registered protocol family 10
[ 24.815665] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 31.811205] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=15,commit=0
[ 32.023742] WARNING! power/level is deprecated; use power/control instead
[ 162.594332] fuse init (API version 7.20)
[ 181.712247] xfce4-session[4386]: segfault at ffffffff00000000 ip 00007fe7c8be9537 sp 00007fffd9c3f2e0 error 5 in libglib-2.0.so.0.3600.1[7fe7c8b86000+fc000]
[ 183.784141] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 184.997887] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff88013aae2948 (20121018/exresop-422)
[ 184.997901] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[ 184.997908] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff88013b4343e8), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 184.997923] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff88013b434168), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 405.815701] NET: Registered protocol family 17
[ 1429.517360] xfce4-session[5257]: segfault at ffffffff00000000 ip 00007f53c2ee6537 sp 00007fff6060c2d0 error 5 in libglib-2.0.so.0.3600.1[7f53c2e83000+fc000]
[ 1430.198201] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=15,commit=600
[ 1431.620829] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=600,commit=600
[ 1432.769216] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 1434.176644] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880136590360 (20121018/exresop-422)
[ 1434.176667] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[ 1434.176680] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff88013b4343e8), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 1434.176709] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff88013b434168), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 1477.326788] usb 1-3: USB disconnect, device number 2
Any help appreciated.
Last edited by NinjaBus (2013-04-28 09:12:19)hadrons123 wrote:does it happen if you use the default arch kernel?
Yes, it keeps happening even with the default kernel when I try to shut down/suspend the computer (Alt-F4 key combination). I've read on some russian forum that it's the problem in recently upgraded glib2 (as they think), however downgrade didn't help. I'll try to check whether xfce4-session is to blame.
EDIT: It's definitely not xfce4-session, I tried previous version. Also, while running downgrade I saw that there is a newer version of glib2 in ARM, which is much more unstable, so I'm using 2.36.1-1.
Last edited by NinjaBus (2013-04-28 15:49:59) -
Two Cisco ASA 5505, IPSec Multiple Subnets, Problem with Phase2, DSL
Hi all.
we have following IPSec configuration:
ASA Site 1:
Cisco Adaptive Security Appliance Software Version 9.1(1)
crypto ipsec ikev1 transform-set TSAES esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set TSMD5 esp-3des esp-md5-hmac
crypto ipsec ikev2 ipsec-proposal PropAES256
access-list SITE_2 extended permit ip 172.27.0.0 255.255.0.0 172.27.97.0 255.255.255.0
access-list SITE_2 extended permit ip 172.28.60.0 255.255.254.0 172.27.97.0 255.255.255.0
access-list SITE_2 extended permit ip 172.22.0.0 255.255.0.0 172.27.97.0 255.255.255.0
access-list SITE_2 extended permit ip 172.27.0.0 255.255.0.0 172.27.99.0 255.255.255.0
access-list SITE_2 extended permit ip 172.22.0.0 255.255.0.0 172.27.99.0 255.255.255.0
crypto map CMVPN 5 match address SITE_2
crypto map CMVPN 5 set peer IP_SITE2
crypto map CMVPN 5 set ikev2 ipsec-proposal PropAES256
crypto map CMVPN interface OUTSIDE
route OUTSIDE 172.27.97.0 255.255.255.0 citic-internet-gw 255
route OUTSIDE 172.27.99.0 255.255.255.0 citic-internet-gw 255
tunnel-group IP_SITE2 type ipsec-l2l
tunnel-group IP_SITE2 general-attributes
default-group-policy VPN_S2S_WAN
tunnel-group IP_SITE2 ipsec-attributes
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
ASA Site 2:
Cisco Adaptive Security Appliance Software Version 9.1(4)
access-list SITE_1 extended permit ip 172.27.97.0 255.255.255.0 172.28.60.0 255.255.254.0
access-list SITE_1 extended permit ip 172.27.97.0 255.255.255.0 172.27.0.0 255.255.0.0
access-list SITE_1 extended permit ip 172.27.97.0 255.255.255.0 172.22.0.0 255.255.0.0
access-list SITE_1 extended permit ip 172.27.99.0 255.255.255.0 172.27.0.0 255.255.0.0
access-list SITE_1 extended permit ip 172.27.99.0 255.255.255.0 172.22.0.0 255.255.0.0
crypto map CMVPN 10 match address SITE_1
crypto map CMVPN 10 match address SITE_1
crypto map CMVPN 10 set peer IP_SITE1
crypto map CMVPN 10 set ikev2 ipsec-proposal IKEV2AES
crypto map CMVPN 10 set reverse-route
crypto map CMVPN interface OUTSIDE
tunnel-group IP_SITE1 type ipsec-l2l
tunnel-group IP_SITE1 general-attributes
default-group-policy VPN_S2S_WAN
tunnel-group IP_SITE1 ipsec-attributes
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
We are not able to reach from 172.22.20.x ips 172.27.99.x.
It seems so that the phase2 for this subnet is missing…...... as long as we try to reach from 172.27.99.x any ip in 172.22.20.x.
We are using similar configuration on many sites and it works correctly expect sites with DSL line.
We can exclude problem with NAT,ACL or routing. The connection is working fine as long as “we open all phase 2 manually” . After re-open (idle timeout) the tunnel the problem comes back.
Thanks in advance for your help.
Regards.
Jan
ASA Site 1# sh vpn-sessiondb detail l2l filter ipaddress ASA Site 2
Session Type: LAN-to-LAN Detailed
Connection : IP ASA Site 2
Index : 3058 IP Addr : IP ASA Site 2
Protocol : IKEv2 IPsec
Encryption : IKEv2: (1)AES256 IPsec: (3)AES256
Hashing : IKEv2: (1)SHA512 IPsec: (3)SHA1
Bytes Tx : 423634 Bytes Rx : 450526
Login Time : 19:59:35 HKT Tue Apr 29 2014
Duration : 1h:50m:45s
IKEv2 Tunnels: 1
IPsec Tunnels: 3
IKEv2:
Tunnel ID : 3058.1
UDP Src Port : 500 UDP Dst Port : 500
Rem Auth Mode: preSharedKeys
Loc Auth Mode: preSharedKeys
Encryption : AES256 Hashing : SHA512
Rekey Int (T): 86400 Seconds Rekey Left(T): 79756 Seconds
PRF : SHA512 D/H Group : 5
Filter Name :
IPv6 Filter :
IPsec:
Tunnel ID : 3058.2
Local Addr : 172.22.0.0/255.255.0.0/0/0
Remote Addr : 172.27.97.0/255.255.255.0/0/0
Encryption : AES256 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 22156 Seconds
Rekey Int (D): 4608000 K-Bytes Rekey Left(D): 4607648 K-Bytes
Idle Time Out: 25 Minutes Idle TO Left : 24 Minutes
Bytes Tx : 312546 Bytes Rx : 361444
Pkts Tx : 3745 Pkts Rx : 3785
IPsec:
Tunnel ID : 3058.3
Local Addr : 172.27.0.0/255.255.0.0/0/0
Remote Addr : 172.27.97.0/255.255.255.0/0/0
Encryption : AES256 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 22165 Seconds
Rekey Int (D): 4608000 K-Bytes Rekey Left(D): 4607952 K-Bytes
Idle Time Out: 25 Minutes Idle TO Left : 24 Minutes
Bytes Tx : 50014 Bytes Rx : 44621
Pkts Tx : 496 Pkts Rx : 503
IPsec:
Tunnel ID : 3058.4
Local Addr : 172.27.0.0/255.255.0.0/0/0
Remote Addr : 172.27.99.0/255.255.255.0/0/0
Encryption : AES256 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 22324 Seconds
Rekey Int (D): 4608000 K-Bytes Rekey Left(D): 4607941 K-Bytes
Idle Time Out: 25 Minutes Idle TO Left : 24 Minutes
Bytes Tx : 61074 Bytes Rx : 44461
Pkts Tx : 402 Pkts Rx : 437
NAC:
Reval Int (T): 0 Seconds Reval Left(T): 0 Seconds
SQ Int (T) : 0 Seconds EoU Age(T) : 6648 Seconds
Hold Left (T): 0 Seconds Posture Token:
Redirect URL :
.... after ping from 172.27.99.x any ip in 172.22.20.x.
ASA Site 1# sh vpn-sessiondb detail l2l filter ipaddress ASA Site 2
Session Type: LAN-to-LAN Detailed
Connection : IP ASA Site 2
Index : 3058 IP Addr : IP ASA Site 2
Protocol : IKEv2 IPsec
Encryption : IKEv2: (1)AES256 IPsec: (4)AES256
Hashing : IKEv2: (1)SHA512 IPsec: (4)SHA1
Bytes Tx : 784455 Bytes Rx : 1808965
Login Time : 19:59:35 HKT Tue Apr 29 2014
Duration : 2h:10m:48s
IKEv2 Tunnels: 1
IPsec Tunnels: 4
IKEv2:
Tunnel ID : 3058.1
UDP Src Port : 500 UDP Dst Port : 500
Rem Auth Mode: preSharedKeys
Loc Auth Mode: preSharedKeys
Encryption : AES256 Hashing : SHA512
Rekey Int (T): 86400 Seconds Rekey Left(T): 78553 Seconds
PRF : SHA512 D/H Group : 5
Filter Name :
IPv6 Filter :
IPsec:
Tunnel ID : 3058.2
Local Addr : 172.22.0.0/255.255.0.0/0/0
Remote Addr : 172.27.97.0/255.255.255.0/0/0
Encryption : AES256 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 20953 Seconds
Rekey Int (D): 4608000 K-Bytes Rekey Left(D): 4606335 K-Bytes
Idle Time Out: 25 Minutes Idle TO Left : 24 Minutes
Bytes Tx : 652492 Bytes Rx : 1705136
Pkts Tx : 7419 Pkts Rx : 7611
IPsec:
Tunnel ID : 3058.3
Local Addr : 172.27.0.0/255.255.0.0/0/0
Remote Addr : 172.27.97.0/255.255.255.0/0/0
Encryption : AES256 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 20962 Seconds
Rekey Int (D): 4608000 K-Bytes Rekey Left(D): 4607942 K-Bytes
Idle Time Out: 25 Minutes Idle TO Left : 24 Minutes
Bytes Tx : 60128 Bytes Rx : 52359
Pkts Tx : 587 Pkts Rx : 594
IPsec:
Tunnel ID : 3058.4
Local Addr : 172.27.0.0/255.255.0.0/0/0
Remote Addr : 172.27.99.0/255.255.255.0/0/0
Encryption : AES256 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 21121 Seconds
Rekey Int (D): 4608000 K-Bytes Rekey Left(D): 4607931 K-Bytes
Idle Time Out: 25 Minutes Idle TO Left : 24 Minutes
Bytes Tx : 70949 Bytes Rx : 50684
Pkts Tx : 475 Pkts Rx : 514
IPsec:
Tunnel ID : 3058.5
Local Addr : 172.22.0.0/255.255.0.0/0/0
Remote Addr : 172.27.99.0/255.255.255.0/0/0
Encryption : AES256 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 28767 Seconds
Rekey Int (D): 4608000 K-Bytes Rekey Left(D): 4608000 K-Bytes
Idle Time Out: 25 Minutes Idle TO Left : 24 Minutes
Bytes Tx : 961 Bytes Rx : 871
Pkts Tx : 17 Pkts Rx : 14
NAC:
Reval Int (T): 0 Seconds Reval Left(T): 0 Seconds
SQ Int (T) : 0 Seconds EoU Age(T) : 7852 Seconds
Hold Left (T): 0 Seconds Posture Token:
Redirect URL :Hi,
on 212 is see
tunnel-group 195.xxx.xxx.xxx type ipsec-l2l
tunnel-group 195.xxx.xxx.xxx ipsec-attributes
pre-shared-key
When you define the peer with static tunnel-group entry ASA is looking for peer configuration in static crypto map. If the peer is behind static NAT configure a proper static crypto map with matching acl and proposals.
If the peer is behind dynamic nat refer this example :http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/81883-ipsec-iosrtr-dyn-pix-nat.html
Regards,
Abaji.
Maybe you are looking for
-
Check the size of uploaded file in Oracle UCM
I need to check the size of the uploaded primary file in Oracle UCM during checkin. I tried writing a filter on the event validateStandard and check the value of dFileSize. But the value is null. Any ideas what event should I use and which parameter
-
IMac just died on me. Need to recover the data.
A friend of mine has a blue looking fruit iMac 600MHz, 256MB, and a CDRW, which just died and it made this 'click' noise when you press the power button. I'm guessing it is the power supply and it there a way to reset the power? I heard it is next to
-
Convert date format from MONTH-YEAR to dd/mm/yyyy
Dear All i want to get parameter in form of MONTH-YEAR AND WANT TO CONVERT DATE INTO 'THIS FORMAT dd/mm/yyyy' IT GIVES ME ERROR PLEASE GUIDE. SELECT TO_CHAR (PTP.END_DATE,'MONTH-YY') , to_date ( TO_CHAR (PTP.END_DATE ,'DD-MONTH-YYYY') ,'dd/mm/yyyy'),
-
ACL on JNDI tree or elements in it
Hello I am trying to find out how I can secure information in the JNDI tree. The documentation led me to believe using the t3 naming service I could protect anything under acl.<i>perm</i>.weblogic.jndi.<i>path</i> but this does not seem to be the cas
-
My manager uses the offline files feature quite a lot and now she has moved to an X220 with Win 7 Pro 64-bit, however some days when she logs in she notices the sync icon isn't in the tray. When you go into offline files it says its enable but not ac