Problem in report of cats_da data is not coming for one absence type.
Dear experts,
For one absence type the data is not coming in the report cats_da. When I check the other absence type the report is showing the data. I dont know where is the problem. Customer is entering data throught PA30 transaction. Kindly help me where is the problem in customization.
No answers so closed.
Similar Messages
-
Urgent::::Data is not loaded for a perticular info object in ods
Hi All,
We have loaded data into an ODS( 0PRC_DS01) in development server. It was successfully loaded into it all info objects.Reports were working well.
When we transported it to production, data loading was taking longggg time (15000 for 9 hours).So, we have done two things to improve the loading speed.
1) we have created an index based on the fields in the where clause RCLNT,RLDNR,RYEAR, DOCNR, POPER in JVSO1 table.
(JVSO1 is an R/3 table from where key data coming to datasource 0EN_JVA_2.)
2)We have updated the optmizer statistics.
Now the problem is, data is not loaded to one perticular info object JOINT VENTURE PARTNER in dso. Which was loaded successfully in development.
Please help us........We will assign points for helpful answersHi Chek in the transfer and update rules whether u mapped the fields with target and also check whether u have routine. and check whether the data is coming for that object from the source.
Khaja -
Delivery date is not coming properly in PO Printout
Hi,
I have a problem in PO Printout that Delivery date is not coming properlyu2026In my PO, there are 5 line items.
If the Delivery date of all line items are same like 01.04.2009, then Delivery date should be shown 01.04.2009 in PO printout.. IT IS COMING RIGHT.
But if the Delivery Date of all line items are different like 01.04.2009, 02.04.2009, 03.04.2009, 04.04.2009 and 05.04.2009. Then Delivery Date should be shown with the each line items in PO print out. THIS IS NOT SHOWING IN MY PO PRINT OUT.
Please tell me what is the problem. Why not coming Delivery date with each line items???
Regardsu2026currently i dont have SAP installed with this system, so i just suggesting you some thing.
goto tcode: nace.
select your output type. check the processing routines. check the smartform and processing routines attached to it. and see how the field is getting populated and what fields are being passed there. -
Error "Data packet not complete; for example, 000013" when reading from PSA
Dear all,
I have an issue with my data loading, when i execute my infopackage, i specify that it should be loaded into PSA before going to the data target. in my infopackage request i notice that i have got missing data package
e.g.
Data package 1 : everything OK
Data package 2 : everything OK
Data package 3 : everything OK
Data package 8 : everything OK
Data package 10 : everything OK
Data package 12 : everything OK
Data package 13 : everything OK
what happen to data package inbetween e.g. DP4, DP5 etc etc?
In my "step by step analysis" under the status tab everything is green and nothing seem to have went wrong, no short dump, no job cancelled, nothing.
Since everything "seems" to be alright, when i try to update subsequently to the data target, i get the following errors below.
Data packet not complete; for example, 000013
Request has errors / is incomplete
I got 2 questions here...
1. why do i have missing data package and it still showes me a green idicator?
2. how can i solve this and is this something i should be worried about?
Thank you very very much!Hii SCHT,
you encounter these type of errors rarely...
but in RSMO screen, check for any TRFCs struck..
also go to the JOB in Source System and analyze the JOBLOG,
there you can find some information about what tht particular job did..!!!
and after that check for the same in the BW system...
perhaps while transferring?extracting the recordsthrough data packages, it might have missed ..
Force the request RED and repeat the IP again...
you dont need to worry about anything...simply force the request red and reload.. just let us know if the problem still persists after repeating the load...
Regards
Prince -
Address and Personal Data is not coming up on Portal ( ESS MSS )
Folks,
I am not able to see the Address and Personal Data is not coming up on Portal ( ESS MSS ) . when I click those links just the roadmap with exit button.
ThanksHi Manish,
Check with your system patch level both from ABAP and JAVA in the same Service Pack levels. if they are different then only we will get this type of errors. Even we i have faced the same problem, but solved with the basis help.
Have you gone through PA30, there Empl data has to be maintained. Then we can get the Data.
Regards,
kishore
Edited by: kishore kumar on Dec 2, 2008 3:56 PM -
Regarding data is not coming on second page
hi all,
I Created one Smartform that is having Two Pages . I Created Two Final Internal Tables for each Page. Data is coming on First Page. I am getting data for second internal table also but data is not coming on second page. I am using Command Option in main window for triggering of Second Page.
What was the problem.
Please suggest.
Regards
ReddyHi,
In the default setting, the next page is the page itself.
If a page is processed (filled) and processing of the form is not finished yet (if not all texts or data
are displayed), the system processes another page. The page used as next page can be
determined statically during the form definition (Next page) or dynamically at runtime (manual
page break).
The new page is the static next page. If a new page is called by a manual page break with
page specification within the main window (dynamic next page), the system processes this
page.
This page does not contain a main window and no static next page exists
In a main window you display text and data, which can cover several pages (flow text). As soon
as a main window is completely filled with text and data, the system continues displaying the text
in the main window of the next page. It automatically triggers the page break -
Data is not coming in pivot table
Hi,
i made a request using some measures,month (time) and some other columns but data is not coming when i m working on pivot table though its working in case of table and graph.
please help me out..
thanksHi,
well data is populating in tables and chart in Oracle BI and i also executed the same query in sql server 2005 and got the desired result.
the reason to show the results into pivot table is -- i want to show the result(measures) with time dimension and some other dimensions so i have to use this pivot table or if u have some other solution please let me know...
thanks
Edited by: user629711 on Nov 20, 2008 11:42 PM -
Data is not coming in internal table
Hello Abapers,
Data is not coming in my internal table.
Plz tell me where I m wrong
SELECTION-SCREEN BEGIN OF BLOCK blk.
PARAMETERS: compcode LIKE vbrk-bukrs OBLIGATORY.
PARAMETERS: billtype LIKE vbrk-fkart OBLIGATORY.
SELECT-OPTIONS: billdate FOR vbrk-fkdat OBLIGATORY.
PARAMETERS : acgrpc LIKE vbrk-ktgrd OBLIGATORY.
PARAMETERS: acgrpm LIKE vbrp-ktgrm OBLIGATORY.
PARAMETERS: taxcode LIKE konv-mwsk1 OBLIGATORY.
SELECT-OPTIONS: plant FOR vbrp-werks .
SELECT-OPTIONS: bussarea FOR vbrp-gsber .
SELECTION-SCREEN END OF BLOCK blk.
START-OF-SELECTION.
SELECT avbeln afkart aknumv afkdat abelnr aktgrd abukrs axblnr
amwsbk bgsber bwerks bktgrm
FROM ( vbrk AS a INNER JOIN vbrp AS b ON
avbeln EQ bvbeln )
INTO CORRESPONDING FIELDS OF TABLE vbrk_vbrp
WHERE ( a~fkart EQ billtype ) AND
( a~fkdat IN billdate ) AND
( a~ktgrd EQ acgrpc ) AND
( a~bukrs EQ compcode ) AND
( b~gsber EQ bussarea ) and
( b~werks EQ plant ) AND
( b~ktgrm EQ acgrpm ) .
RaviHi,
write ur query this way :
SELECT avbeln afkart aknumv afkdat abelnr aktgrd abukrs axblnr amwsbk bgsber bwerks bktgrm
FROM ( vbrk AS a INNER JOIN vbrp AS b ON
avbeln EQ bvbeln )
INTO CORRESPONDING FIELDS OF TABLE vbrk_vbrp
WHERE ( a~fkart EQ billtype ) AND
( a~fkdat IN billdate ) AND
( a~ktgrd EQ acgrpc ) AND
( a~bukrs EQ compcode ) AND
( b~gsber IN bussarea ) and
( b~werks IN plant ) AND
( b~ktgrm EQ acgrpm ) .
even plz check then internal table ' vbrk_vbrp ' if they have all the fields of select query and even the order is same as select , since you are using ' into corresponding fields of table ' clause in select statement.
hope this helps.
thanx,
dhanashri.
Edited by: Dhanashri Pawar on Aug 26, 2008 6:14 AM -
Nav.attr data is not coming in cube
Hi guys,
Nav.attr data is not coming in cube even though there is data in master data tables.Hi Ajay,
In your case for the Nav Attr data to appear firstly load the master data where your Nav Attr resides and then do the apply hier/attr change for that master data.
Hope this helps.
Bye
Dinesh -
Report on delivery data in item level for list of po
Dear all
How to take Report on delivery data in item level for list of po
regards
M.Chandra mohanYou can check any of the standard reports like ME2M with the selection variant as "PO where GR exists"
-
Exchange Rate Date is not Upating for non-catalog request types in iProc
Hi,
The Exchnge rate date is not updating for some non-catalog request types in iprocurement (11.5.10.2 version) and this happening only for some request types only.
can any one help what could be the reason.
Regards,\
Kevin.Hi Venkat
i suggest you to go thru the dev guide ..... but to answer your question i would say....
**** It looks like "Define Information Template" form only accepts Independent Value Sets and not table based Value Sets (thatinvolve SQL statements).
Well in OAF to display a dropdown list all you need is a query .. so one can write a query to extract the values from a independent value set .... but the same is not possible with table type value set instead you can use the same query used to define the table type value set .
You can create a LOV (one with flash light) even with a independent value set ....
To create a LOV you need a View Object(query which will fetch valid records) and a Public Region (to display)
if you ahve these then you can achive the requirement thru personalization
if the VO and Region are not present then you have to create them .......
Once you are thru the dev guide please go thru the link below which shows adding a lov to an existing page thru personalization....
http://oracle.anilpassi.com/create-lov-based-field-using-personalization-in-oa-framework.html
Thanks
Tom.... -
In the packing list, batch number and expiry date is not appearing for a ma
Dear Friends,
I have an issue in the packinglist.
In the packing list, batch number and expiry date is not appearing for a material.
But in the delivery the batch number and expiry date is appearing.
Why this has triggered and how to solve this?
With regardsHi Vamsi,
Please go through the output type Smart form or script programe of the packing list and check with the abaper If is there any Bug.
Regard's
Murali. -
Value date is not maintained for payroll area 08
Dear all,
I am facing this error Value date is not maintained for payroll area 08 while executing Transaction
PC00_M08_CALC.
Please let me know how to rectify this error?
Thanks
Best regards,
SmitaHi Shruti,
Please find the attached screen shot of the error.
Thanks
Smita -
Data Not Available. Statspack data is not available for this database insta
Hi,
while trying to configure the 9i db on grid control I installed the statspack data while configuring it. But now when I try to see the historical data as part of the performace tab for the 9i db it complains as below
Data Not Available. Statspack data is not available for this database instance. Make sure that Statspack is installed on the target instance.
Please shed some of your inputs.
thanks in advance
PKHi,
I think it is not installed.
Using 1097660794 for database Id
Using 1 for instance number
, stats$database_instance di
ERROR at line 9:
ORA-00942: table or view does not exist
I did exactly as it said while configuring the db. but seems like something is wrong. Can you please advise me on how can I install it in commandline.
Thanks
PK -
Sharepoint List to Telerik Grid, Where data is not coming from database into List.
SharePoint List to Telerik Grid, Where data is not coming from database into List.
Here, i have a SharePoint list , where configurable text are stored, using some utility.
I want to convert that SharePoint list into Telerik grid, with all Editable Option which i have in SharePoint.I know little about Telerik Grid, only find following article about Telerik integrate with SharePoint:
http://www.telerik.com/help/aspnet-ajax/moss-spradlistview_designer_general.html
a similar question:
http://www.telerik.com/forums/how-to-bind-to-a-sharepoint-list-using-radgrid
Thanks,
Qiao Wei
Maybe you are looking for
-
How to backup data prior to harddrive swap
My HDD is going to be swapped out under warranty by Apple. What do I need to do to ensure everything is put back where it belongs? Thanks
-
Installing Windows XP via Bootcamp 3.0
Hi everyone! Hope you can help me with this: I was trying to install Windows XP Profesional with SP 3 included on my MBP 13" 2011 but after creating the partition Boot Camp warns me that it only support Windows 7 editions. Does this mean I can't inst
-
CUA can be used between 2 clients which are in the central system
Hi Question 1: In case of CUA, we have the conecept of central system and child systems. From Central system we will be able to administer child system. Buy my question is can we implement CUA with the clients which are also on the central syst
-
How to replace number with flexible length
Hi.. Could somebody help me, how to replace any number start with more than 2 digits of "0" become 2 digits "0" only. As example:- Sample Result 123456789 => 123456789 0123456789 => 0123456789 00123456789 => 00123456789 000123456789 => 00123456789 00
-
Hi, I am trying to create a simple report based on a SQL query, something like this, select id, customer_id from master_table where status='open' I changed the column, Customer_id's Updatable Column Attribute to "Display as Text (based on LOV, does n