Problem In report output display when i run in the background

Hi,
In a classical report i am printing around 17 fields  the width of the report out put is around 800 characters.
If i run  the report in the  fore ground it running perfectly. But the thing is when i give large selection is it GETTING ' TIMED OUT ' as it is running more than an Hour.
so i wanted to run it in the back ground to avoid TIME OUT problems.
But when i run in the backgroud   i am not getting  full  out put in the SPOOL request(SIZE of the report output may causing the problem) .
Pls come up with some solutions
Thanks in advance

Try increasing the spool length..
Refer this link for doing so.
Spool List output display > 255 char when the rpt is run in Background
Thanks
mahesh

Similar Messages

  • Page breaks appear in the spool output of report when run in the background

    Hi All,
    Report is using fm 'REUSE_ALV_GRID_DISPLAY' to display the report. parameters passed to this fm for display are :it_fieldcat,is_layout,it_events,t_outtab.
    Page breaks appear in the spool output when report is run in the background.These page breaks needs to be removed. When executed in the background, the excel extract should be the same as if pulling directly from the report itself.
    How to remove the page breaks in background?
    Thanks & Regards,
    Abhishek Singh

    Hi
    You can use the below code , which the reprt run in background. If you run the report in background thenyou need to use  'REUSE_ALV_LIST_DISPLAY'
    if sy-batch = ' '.
    call 'REUSE_ALV_GRID_DISPLAY'.
    else.
    call 'REUSE_ALV_LIST_DISPLAY'.
    endif.
    if you are using OO alv then write this code..
    CALL METHOD cl_gui_alv_grid=>offline
    RECEIVING e_offline = off.
    IF off IS INITIAL.
    CREATE OBJECT g_custom_container
    EXPORTING container_name = g_container.
    ENDIF.
    Regards

  • WBS element field to Depreciation Simulation Report  output display

    Hi SAP Experts,
    We need to Add the WBS element field to Depreciation Simulation Report  output display (S_ALR_87012936)
    Could please give your valuable inputs
    Thanks
    Hari Pothula

    HI Javed,
    We have capitalized with WBS element but not displaying in simulation report.
    All configurations done in in ACSET and activation Account assignment objects
    Thanks
    Hari

  • Bold font in report output display

    Dear All,
    Will any one let me know how to set BOLD font in the report output display?
    Thanks,
    Ranjan

    <b>u cannot use this in 4.7</b>
    REPORT ZFONT NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
    Start of print-control
    NEW-PAGE PRINT ON.
    PRINT-CONTROL FUNCTION 'SF000'.
    WRITE: / 'This is CPI 20'.
    SKIP.
    PRINT-CONTROL FUNCTION 'SF020'.
    WRITE: / 'This is CPI 6'.
    SKIP.
    PRINT-CONTROL FUNCTION 'SF008'.
    WRITE: / 'This is CPI 12'.
    Depending on your SAP printer device, this may also work
    PRINT-CONTROL FONT 1 LPI 6.
    you can try to change font and LPI numbers
    WRITE: / 'font 1 lpi 6'.
    PRINT-CONTROL FONT 2 LPI 6.
    WRITE: / 'font 2 lpi 6'.
    PRINT-CONTROL FONT 3 LPI 6.
    WRITE: / 'font 3 lpi 6'.
    End of print-control
    NEW-PAGE PRINT OFF.
    *--- End of Program

  • Probelm in report while running in the background

    Hi all,
    Iam displaying around 20 fields in in report display. when i execute in the fore ground it is displaying all fields perfectly. but when i run it int he back ground and down load to Excel file its  displaying   5 fields only.(And these 20 fields are much longer fields. all columns may occupie around 200 chars. in the outut list)
    pls let me know  wut will be the problem?
    ( the length of the SPOOL screen may be smaller than report output list i think.)

    Hi,
    If you are running transaction in Background it is not possible to get list more than 255 char.
    So better option is download that data in file. But for this use dataset as upload, download function does not work in Background mode. In background mode it is not possible to upload and download file from presentation server.
    this is possible in case u have file on Application server. So, for this you have to use DATASET.
    thanks
    Sarbpreet Multani.

  • Can the width of a report that has been run in the background be increased?

    Hello Experts,
    How can I increase the width of a report that I have run in the background so that it does not wrap text to the next line?
    I have been running the same HR report successfully in the background for many months.  Today I ran it with the same parameters that I've always used and when I retrieve it from my Own Job Spool - System | Own Spool Request | Display Contents the last field is wrapped to the next line.
    Thanks.
    Regards,
    Jeanette

    Jeanette,
    Thereu2019s another possibility if Tedu2019s suggestion doesnu2019t work. When you look at your spool requests, thereu2019s an icon on the toolbar next to the eyeglasses that looks like a yellow rectangular callout. Itu2019s called u201CDisplay in Maximum Widthu201D. Select the Spool no. to display and then press this icon. Shift + F4 is the shortcut.
    Regards,
    Howard

  • Report not displaying data from one of the infoproviders

    Hi Experts,
    Issue: Report not displaying data from one of the infoproviders
    I have a report 'ReportA' which has multiprovider MP1 as the source.
    MP1 has two Infocubes IC1, IC2 in its design.
    Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
    Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
    Please reply.
    Regards,
    Suraj S Nair

    Hi All,
    When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
    I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
    Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
    I checked the Characteristics, all of them are assigned corectly.
    Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
    Regards,
    Suraj S Nair

  • I lost all my unpinned 30 tabs and could not restore it, when Adobe update opened a link by firefox, which was not running in the background.

    I lost all my unpinned 30 tabs and could not restore it, when Adobe update opened a link by firefox, which was not running in the background.
    I guess what I have experienced might be a special case of 'Restore previous sessions'. The actual situation was that after I rebooted my laptop, Adobe update jumped out indicating an update being finished successfully. After I clicked on the 'close' button of the Adobe window, it automatically started firefox and linked to its website. But I did not find the 'Restore previous sessions' page this time. Then I restarted firefox, this time there was a start page with 'Restore previous sessions'. However, sadly enough, it is only restored my pinned pages plus the Adobe website. Actually, I am using 'bookmark all tabs' from time to time to secure opened tabs, but this time I did not expect such an incident. I would suggest to improve the 'Restore previous sessions' with multiple time tags and appear in all cases including my reported case here, after updating firefox, crashes etc. I like firefox in most occasions, therefore believe and hope it becomes better and more robust. Thank you very much!

    Hi,
    Please see the following support request: http://forums.mozillazine.org/viewtopic.php?f=38&t=2628065
    I think the best option would be to leave feedback here to let the relevant development team know about the problem you have had: https://input.mozilla.org/en-GB/feedback
    Also you could try the [https://addons.mozilla.org/en-US/firefox/addon/session-manager/ Session Manager] add-on which gives more control over how sessions are restored.
    I hope that helps

  • HR Report running in the Background

    Hi everyone,
       I have a HR report which runs in the background (every 2 weeks) using a variant. When I execute the report using the same variant in the background using the menu option, it works fine( for that matter, even in the foreground) , but when it runs on the scheduler, the report gives totally different results. What could be the reason? This report does use the Logical Database.
    Your answer will be greatly appreciated.
    Thanks,
    Reeta

    Hi
    what i see from your point is that you are putting the report in background from the selection screen only and making it a periodic   one with the same variant.even if u r using dynamic variants in that case also when the report will runs after two weeks it will take the values of the two weeks back instead of taking it in correctly
    so it would be better if you can schedule the program from sm36 with program name and variant ,then it will work perfectly fine,and logical data bases pnp and all work perfectly fine in background,
    in case i understood ur point wrongly then please let me know

  • How do we create a variant for report which runs in the background?

    Hi,
    I want to create a report which will have some variants and will be running in the background?
    The main intention is to transfer the data from one database into another. Please explain the step by step process.
    Regards
    Amit

    Hi Amit,
          When you run a report program in foregorund(If you have a selction-screen), by pressing F8 button, it takes you to the screen where when you press execute button, the report is executed.
          In this screen, you can enter the requirec values which you wish to store in the variables in the selection-screen and press SAVE button, then a variant will be created. You can create the required variants for your report and then when executing the same report in background, the process goes in this way,
    Go to SE38->Program-> Execute->Background, there you can give the variant name and press EXECUTE IMMEDIATELY and your program runs in background for the given variant.
    Hope this is helpful to you. If you need further information, revert back.
    Reward all the helpful answers.
    Regards
    Nagaraj T

  • Since the update i can not open webpage,also even when i close it keeps running in the background.

    since the update i can not open any webpage,ex:homepage i use www.besthomepageever,nothing open there,i tried yahoo.com same thing,plus it keeps running in the background when i close it and im asked to restart the comp.
    First time in all these year i have problem like this
    Thanks
    Gerard
    Ps,i deleted it and reinstalled it same thing

    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Press the '''Alt''' or '''F10''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?. Then restart.

  • When I click on a new link, it opens a whole new firefox instead of using my default which is running in the background

    I have firefox as my default browser. Anytime I click on an email or search for something, instead of opening my default browser, firefox loads a new firefox page. It is a blank page just as if I had never had one. It has nothing on it except how you would start out before you set up your tabs and history etc. My default firefox is still there running in the background but I must click on it and manually put in the link I was trying to open.
    Any suggestions.

    Some added toolbar and anti-virus add-ons are known to cause
    Firefox issues. '''Disable All of them.'''
    Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift ''(Mac Options)'' >''' key, and then starting Firefox. Is the problem still there?

  • HT1365 Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

    Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

    The figures you mention only make sense on your intranet.  Are you still using the same wireless router.  The verizon one is somewhat limited as far as max wireless-n performace.  For one thing it only has a 2.4 radio.   I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

  • Reading the output from a object running in the local machine.

    Reading the output from a object running in the local machine.
    By using a signed applet i am lunching a small application that returns an image object, how to read that without storing it in the hard disk.
    Which means i need to read the image object return by the local application using applet or jsp .
    i am using tomacat and an html page with an applet with it to lunch the application.

    You can write that image in a binary format using OutputStream for System.out and then read it in your applet.

  • I have Windows 7 and just recently experienced a problem with itunes freezing up when I clicked on the "apps" tab.  Everything else seems to work okay in itunes.  I have uninstalled it and reloaded it 4 or 5 times, but still freezes up.

    I have Windows 7 and just recently experienced a problem with itunes freezing up when I clicked on the "apps" tab which shows the apps that are loaded on my phone.  Everything else in the itunes software seems to be working okay.  The problem is in the part where you sync the newly purchased apps.  The apps will all be blank that are downloaded and that part of the software crashes itunes or freezes up.  I can get out of itunes okay after the freeze up, but it just stops me from syncing anything that I have newly added.  If anyone has had this problem before or knows someone that has, please let me know how I can fix it.  I have uninstalled and reloaded itunes 4 or 5 times, but the problem is still there.  I might add that I have been using itunes and purchasing apps for 2 to 3 years without any problems.  HELP.

    You would get better response from the iTunes community forum.
    Have a nice day!

Maybe you are looking for