Problem in resizing multicolumn listbox in

I am using multicolumn listbox to show my test to user. In development PC it looks nice and displays as much as column I want but in other PC where I am installing my application there last row column is partially visible.
I have set VI to resize the VI as per monitor resolution. Attached image for reference.
What could be the reason?
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

RavensFan wrote:
The listbox scales with the front panel, which you said is scaling with the monitor resolution.
However, the widths of the columns do not scale with the listbox itself. You'll need to adjust them either manually or programmatically like Michael describes.
Differnt monitor have differnt resolution. It might possible that one montor I will keep 3 and other I need 4. Then in that case I need to make differnt exe file for each
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

Similar Messages

Resize a multicolumn listbox

Hello!
I want to resize a multicolumn listbox. But i don't want to resize wiring the number the columns and rows by his property node. I want to wire automaticlly the width and the height exactly of the multicolumn listbox. I'm looking forward the property node but i haven't found it. How can i wire this values, thanks.
Larson

There is no property node to change the size of a list box.
However, there is a workaround : you can set the cell sizes and the number of rows and columns.
Accordingly a solution is to save the initial cell dimensions, create a big single cell listbox with appropriate dimensions, then reset the cell sizes.
The attached vi does the trick, but I left some work for you : you'll have to modify it to also adjust the Listbox height
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Set ListBox width.vi ‏57 KB

Multicolumn listbox scrolling problem

Multicolumn listbox contains test data. As user starts test, it is required that the horizontal scroll bar move to the right edge so that the right most column is viewable. Second, as the tests are running the multicolumn listbox is supposed to scroll to the test row being run. I have achieved it through the Top Left Visible Cell property. But then user can disable autoscrolling feature. When it is re-enabled, the row being currently run becomes the top row (by scrolling). Here is the problem (with horizontal scroll bar). Suppose user has scrolled horizontally to a certain position. How do I let it remain/retain while scrolling the verticalbar to the currently running row. As I set the Top Left Visible Cell property, the horizontal bar is forced to a position defined by Top Left Visible Cell property's column parameter, that is, I want to make the currently executing row visible, by scrolling to it, but not move the horizontal scroll bar?
Thanks in advance.

Yes that is exactly what I am doing. But the problem is that doing so adjusts the horizontal scroll bar with the left edge of the left most visible column, that is adjusts the moves the horizontal scroll bar to left and what is desired is that it be left where user has positioned it (that is maybe not coinciding with the left most edge of the left most visible cloumn). (Is that even possible?).
Second, how do you position the scroll bar to the right most edge of the multi column list box, whenever such is required, without making the not being used right columns (that is not scrolling beyond the boundary of right most data column) visible?
Thanks for your replys guys.

Problem with multicolumn listbox

I have a problem in selecting a multicolumn listbox and display it as an individual elements of a selected array. The problem is that whatever I typed in the multicolumn listbox will be disappeared after run. The only solution to get those individual elements is to type those element as in costant of 2D array and connect it to the property node of the multicolumn listbox. But that's not what I want, I want user to be able to select from what displays in the multicolumn list box and then represents each individual element.

The thing to remember is that although a multicolumn list box looks like a string table, it's really a numeric control. To access the strings you have to use the ItemNames property.
Writing to the property (which is 2D array for a multicolumn listbox or 1D or a conventional listbox) displays strings in the box, reading the property would readout anything you might have entered into it.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Problem with Multicolumn Listbox Scrolling

Hello...
Can anybody please tell me how to scroll according to row no. in multicolumn listbox?
I'm working on a VI where I have to test some conditions which are depending upon RPMs... For testing ease I have sorted the conditions according to the similar RPM... But the conditions are scattered in the multicolumn listbox ie they are not in sequence... Suppose the conditions are on row no. 1, 7,15,38,56,82,100,139,180 something like that....
Is it possible to scroll down according to row no. While running the VI...? So that the viewer can see which condition is in progress & it's results...
Thanks in advance for any help...

I have seen a property in a scrollbar that limits the scrolling range to it's maximum.
I'm not sure the same property is available in 7.1.
You might need to remove the listbox's own scrollbar and use a seperate one.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Filling large array into multicolumn listbox

Hi,
I need to fill a multicolumn listbox with a large array. I feed a 2D array into the ListNames property. The problem I am having is that if the array is large (+1000) it is taking forever to update the itemnames. Is this because the listbox is going through a resize? Is there someway to intialize the ItemNames array to speed up the insertion. It is also slow if the next array insertion (overwrite) is a small array.
thanks Michael

Hi Michael,
Please take a look at the attached VI.
This VI allows the user to programmatically (during run time) write data to a multicolumn listbox. The VI uses the control reference to a multicolumn listbox, so this VI will work on any multicolumn listbox. The VI has inputs for the 2D array (of strings), and a start location (row and column) where the zeroth (top left) element goes. The VI returns the end row and end column of the multicolumn listbox. This is useful for writing successive entries to the listbox.
In this vi, I am currently writing a 1000*10 2D array to a multicolumn listbox and it runs very fast.
Regards,
Ankita A.
Attachments:
programmatically_writting_a_2D_array_to_a_multicolumn_listbox.llb ‏104 KB

Adding a single line to a multicolumn listbox?

Hi Community,
I have a multicolumn listbox which tens of thousands of lines where each line is color coded and represent a cycle with a pass/fail status. The only way I have found to add lines to a multicolumn listbox is to read its ItemNames property which is a 2D array of strings, add the new line to the 2D array and then write then new array back to the ItemNames property.
The problem is that after couple thousands of lines this get more and more slow.
Is there any way to speed this process up, maybe by adding the line to the listbox in a different way?
thx.

The Listbox, and Multicolumn listbox controls got many UI performance improvements in 2013, what version are you using?
https://lavag.org/topic/17009-labview-2013-favorite-features-and-improvements/
But even if you are on an old version there are many tricks to making the UI more responsive, like using defer panel updates, and virtual multicolumn listboxes.
https://lavag.org/topic/15289-virtual-multicolumn-listbox/
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Entries into Multicolumn Listbox/Safing Data in .txt-file

Hello. I haven't found anything helpful for my problem or better to say problems. I have to do a task that I have no idea how to solve. It isn't helping that I was never good with programming. Here is what I have up till now:
I want to write seven strings indivudally into a multicolumn listbox with seven columns. The first shall be a running number, increasing for every row. For this I'm using right now a Case Structure. And there is my first problem. I don't know how to realize that whenever a row is completed the next string is written into the next row instead of overwriting one in the completed row.
This has to go one for as long as the user wants to. Then there has to come a Pop Up Window - if that's the correct term - and shall ask the user if he/she wants to safe the created list into a textfile. And that's my next problem. I have no idea how to program that.
I know it's probably rather easy to program these things in LabVIEW 8.0 (which I'm using) but as I've already said I'm anything but good in programming at all and to make things even more complicated I don't want to do this task, therefore not putting all my energy into it as a result.
Please, can someone here help me?

Does it have to be a multicolumn ListBox?
Seems like a table might be more appropriate, if it's only for display purposes.
Either way, you need to use a FOR loop inside a FOR loop to generate a 2-D array of strings.
The INNER loop generates the strings for each column in a row, the OUTER loop generates each row.
You wire the 2-D array directly to a TABLE indicator, or to the ITEM NAMES property of a ListBox.
Attached is a pic.
Message Edited by CoastalMaineBird on 08-21-2007 01:52 AM
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks
Attachments:
TwoLoop.png ‏226 KB

Migration of multicolumn listbox from 7.1.1 to 8.5

I recently migrated a VI containing a multicolumn listbox from LV 7.1.1 to LV 8.5. Interestingly the 3D-headers got lost and the hight of the rowes changed.
Left in the picture is the LV 7.1.1 version and right is the LV 8.5 version. The font is set to Lucida Console 14 bold.
I got CAR 119444 for this conversion bug.
Message Edited by waldemar.hersacher on 07-10-2008 09:02 PM
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions
Attachments:
multicolumnlistbox.png ‏2 KB

Hi Vicky,
No worries my friend
We have not done this upgrade and do not have any current plans to do so. I am
always, always, always slow to move along the upgrade path. This may be a bad thing
but it has saved us some great pain as well over the years. Our current versions are;
CUCM - 7.1(3b)su2
CUC - 7.1(3b)su2
We have found these versions to be very stable. I have spent a fair bit of time looking at people's
migrations to 8.5(x) here @ CSC and have not seen or heard of too many horror stories. This is one bug you'll
want to look out for.
CSCtn61453            Bug Details
Applying 8.5.1 software as patch results in corrupted CUC installation.
Symptom:
After fresh installation of 8.5.1 software, we can notice several problem symptoms.
- Connection services and Connection DB does not start
- System cannot be accessed via web page
- Informix error messages for certain CLI commands
Example :- show cuc cluster status
com.informix.asf.IfxASFException: Attempt to connect to database server (ciscounity) failed.
Command failed
Conditions:
It is observed during fresh installation of Unity Connection product when installation was
started with earlier version of software and 8.5.1 software was applied as a patch during the setup process.
Workaround:
First, perform a fresh installation of earlier version of software using the install media. Then after verifying the installation, proceed with the upgrade to 8.5.1 as a separate process.
Status
Open
Severity
2 - severe
Last Modified
In Last 3 Days
Product
Cisco Unity Connection
Technology
1st Found-In
8.5(1)ES1
Best of luck with your changes.
Cheers!
Rob

Images in Multicolumn Listbox doesn't work as expected

In the attached example, the symbols are getting displayed in the correct order but missing the symbol for the first row. I can manually select the symbol but by default only the 2nd symbol from the provided array list appear.
Any idea what's the issue?
How to display correct symbol?
Thanks in advance.
Cross-post from LAVA: http://lavag.org/topic/15788-images-in-multicolumn-listbox-doesnt-work-as-expected/page__pid__95584#...
Solved!
Go to Solution.
Attachments:
Images & Multicolumn ListBox.vi ‏10 KB

Hello, Vidula
It seems that index 0 is reserved for the empty symbol, no matter what custom symbol you provided. Adding one image in front before setting symbols array and incrementing ItemSyms indexes solves this problem. However, I can't find any information about this in documentation, which would be nice
Attachments:
Images & Multicolumn ListBox.vi ‏12 KB

I have a vi that reading data and put it in a multicolumn listbox one by one, I want to know how can I do it if i will use MS powerpoint instead of multicolumn listbox.

i want the data to be transfered in MS Powerpoint like what multicolumn listbox act in my vi.
(would you mind if i will ask for an example)
Thank You

Good morning:
I think you might have an easier time doing this with a Powerpoint macro than with Activex. You can save your data to a spreadsheet file, and then let the PPT macro read that file and format it the way you like. You will have to have two programs operating simultaneously, but that shouldn't be a problem.
Eric
Eric P. Nichols
P.O. Box 56235
North Pole, AK 99705

Add text to specified index in multicolumn listbox

Hi!
I have smal problem with multicolumn listbox. My application should
create list of values where user can increase and decrease values of 1
or more tester at same time.
e.g when user gives for tester 1 values 1 - 5, my vi creates list where values are displayd like this:
1
2
3
4
5
after that user gives for tester 2 values 5-1 and my vi creates list where values are displayd like this:
1
5
2
4
3
3
4
2
5
1
etc.
First I planned use insert into array function where for 1:st tester
row index would be 0,1,2,... and for 2:nd tester row index would be
1,3,5,... etc. One problem in this solution is that if tester 2 have
more values than tester 1, there will be left empty rows between
values. I planned use string replace to solve that problem, but then I
noticed antoher nasty feature of multicolumn listbox.
More serious problem with this structure is, that if tester 2 have more
values than tester 1, multicolumn listbox shows only same amount of
values than what tester 1 have and rest of values are lost in
kyberspace, because in multicolumn listbox values can be added only
places where already are values or to last row +1. Do anyone have any
ideas how to prevent this or how I should build my VI so I could create
test list for testers?

hi Janne.
it took me a while to get back
sorry!
good to know u have been able to solve it!
anyhow, do look this vi i have attached. This also takes care of extra elements in the larger array and appends them into the interleaved list box entry.
hope it can be of help to u.
ciao
Devchander
Attachments:
listbox_vi.vi ‏90 KB

Regarding Array to Multicolumn Listbox data's manipulation

Hi - I want to display the above mentioned array in muticolumn listbox with 2 columns , first column needs to be belongs to array [0] (Date and time ) and second column needs to be belongs to array [1] and array [2] ( Cone and Vane strings).
I have tried to implement the same, please go through the attached VI and I cannot make the above mentioned array data's into two column multi column listbox data's (that is , can't able to display the array [1] and array [2] data's in single column.
Please let me know the solution to resolve this as soon as possible.
Thanks and Regards,
Dinesh
Attachments:
Cone and Vane Operations_Final.vi ‏60 KB

Well, your VI is a complete mess and has several CPU burner loops that run as fast as the computer allows. There is also a lot of duplicate and overly complex code. Programmed correctly, code with all this functionality could probably fit on a postcard.
Anyway, for just building the multicolumn listbox, here's somewhat simpler code. Hopefully you can adapt it to your problem.
Note that you probably want to add only one row at a time, and you only want to add to the listbox and save to the file when new data arrives and not millions of times per second. Try a queue, for example.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Cone&Vane.vi ‏8 KB

Multicolumn Listbox not more than 32 Symbols?

I have a Multicolumn Listbox. In the first row, I have a symbol (the diamond). Configuration of the Listbox is done via the frontpanel editor. Data is inserted programmatically, as well as the size, visibility and colors of the symbols are set programmatically. Basically, everything works fine. BUT when I insert more than 32 rows into the Listbox, there are no symbols on rows 32+.
I did not find any signs that the number of rows or number of symbols is set to 32 anywhere in the code or on the frontpanel editor.
What could be the reason for this strange behavior?

mibeer wrote:
So the strang behaviour could probably be reproduced by just adding programmatically a random number of entries to a multicolumn listbox upon click of a button.
Well, guessing does not really belong here.
If you suspect a LabVIEW bug, wire up a small example that demonstrates the problem and we can immediately eliminate the "probably" and get a definite answer instead. We like facts better!
Please do so! Thanks.
LabVIEW Champion . Do more with less code and in less time .

How to hide multiple columns in multicolumn listbox like as an excel sheet?

Hello All,
I have large amount of data that is to be displayed on multicolumn listbox. After displaying that, I want to hide or delete some columns from listbox in runtime.
I know how to hide one column using active cell property node. But I want to hide multiple columns. I am using LabVIEW 2011.
Thanks in advance.
Thanks & Regards,
Manisha

Thank you so much.
But I have total 12 columns and I don't want to delete columns serially. I want to delete inbetween columns, like in attached VI I want to delete column A & D only.
And in this user have to select it from frontpanel. I want this is to be done as in excel, like we select the entire column and either we hide it or delete it. One more thing I want to clear the data in multicolumn when I next time open my VI. How to do that?
I hope am clear in explaining my problem.
Thanks & Regards,
Manisha
Attachments:
Delete Column.vi ‏10 KB

Problem in resizing multicolumn listbox in

Similar Messages

Maybe you are looking for