Problem in RFC Connection

Hi,
When i access SM59 transaction -> Under HTTP Connection to ABAP system, there is an entry like INTEGRATION_DIRECTORY_HMI. When i click on it and press the connection test, i get Internal Server error.
The user id is PIIUSER. the res is dir. Is this user correct.. If not, which user should i give..
Also, when i access Integration Repository using SXMB_IFR transaction, i used the PISUPER user, and it logged in successfully.
Is there any connection between these two... Please suggest...
Kindly help...
Thanks & Regards,
Madhukar

Hi,
If you are getting this
~response_line               HTTP/1.1 500 Internal Server Error
~server_protocol             HTTP/1.1
~status_code                 500
~status_reason               Internal Server Error
connection                   close
Then it is not an error . you can proceed with the scenario...
since you are passing an empty request you are getting this message
Regards,
Kumar.

Similar Messages

  • Problem with RFC connection - tp program not registered

    Hello everyone
    recently there  has appeared a problem with the RFC connection on our system - we received the following set of messages:
    Trace file opened at 20101221 130738 Central European Standard Time, SAP-RE
    ======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Tp program is not registered.
    ABAP Programm: RSRFCPIN (Transaction: SM59)
    User: xxx(Client: 100)
    Destination: SIDRFC_IFSAPHRCZPKCP (handle: 2, , )
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
    CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Program transakcji nie jest zarejestrowany
    DEST =SIDRFC_IFSAPHRCZPKCP
    HOST =%%RFCSERVER%%
    PROG =IFCZPKCP
    GWHOST =ssapprod
    GWSERV =sapgw21
    I tried to register program with a command:
    rfcexec -aIFCZPKCP -gssapprod -xsapgw21
    but with no success - the program didn't appear on the list of logged clients on the system in gateway monitor. Frankly speaking we do not know now what else we can do - please help!
    We have ECC 6.0 (SAP_BASIS 700 SP18) on Windows Server 2003 R2 x64.
    Thanks in advance for any help.
    Regards
    Peter

    Hi Salim
    thanks for your reply.
    ./rfcexec -a(PROG_ID) -gssapprod -xsapgw21 &
    The syntax you're providing refers to UNIX systems, but I did similar thing on our Windows system - I tried all of the following methods (unfortunatelly without success):
    rfcexec -a(PROG_ID) -gssapprod -xsapgw21
    full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod -xsapgw21
    rfcexec -a(PROG_ID) -gssapprod.domain -xsapgw21
    full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod.domain -xsapgw21
    Can you advise me what to do now?
    Thanks
    Piotr

  • Facing problem with RFC connections

    In the Maintenace View for RFC connections, when I press the 'Apply' button I am getting the message"You have no authorization to display the destinationu201D for all the 4 destination IDs"
    Can somebody suggest on how to overcome this problem?
    Thanks,
    Mohammed Tauseef Ahmed

    Hi
    The message over here means the user with which you are logged into the control system and the CPIC user that you may be using to create RFC destinations to the other systems in the landscape do not have the right authorizations.
    It is recommended that all the users have the role TDMS_USER (atleast) or TDMS_MASTER assigned to it.
    Once the role is assigned it will work fine.
    Regards
    Pankaj.

  • Hai friends , i am trying to install SAP 4.7 EE problem in RFC connection

    This is the Error I am getting , kindly help me , please
    TRACE
    showing dlg d_rfc_logon
    INFO 2020-02-15 20:01:52
    RFC parameter CLIENT was set to value 000.
    INFO 2020-02-15 20:01:52
    RFC parameter USER was set to value DDIC.
    ERROR 2020-02-15 20:01:52
    FRF-00002  Unable to set invalid value  for RFC parameter PASSWD.
    TRACE
    RFC password information has invalid size:
    TRACE
    Password consists of 1-8 chars
    TRACE
    tSAPSYSTEMSLOGON.updateRow(, WHERE ROWNUM=0), updating

    This is the Error I am getting , kindly help me , please
    TRACE
    showing dlg d_rfc_logon
    INFO 2020-02-15 20:01:52
    RFC parameter CLIENT was set to value 000.
    INFO 2020-02-15 20:01:52
    RFC parameter USER was set to value DDIC.
    ERROR 2020-02-15 20:01:52
    FRF-00002  Unable to set invalid value  for RFC parameter PASSWD.
    TRACE
    RFC password information has invalid size:
    TRACE
    Password consists of 1-8 chars
    TRACE
    tSAPSYSTEMSLOGON.updateRow(, WHERE ROWNUM=0), updating

  • Configure RFC connection

    Hi,
    We have recently decoupled WD applications such that critical data is read using RFC calls to another system or client.I am facing problems in RFC connection configuration.In sm59,in the tab logon and security,I want to configure connection for current user.I think it'll require setting up of trusted system,which I don't know how to do.Could you help me by providing suggestions on what else I could do?
    Vikram

    Do you want to setup a trusted RFC connection?  I can't really tell from your question what you want.  Do you just always want to use the current logon user for the RFC - if so then you do need to setup trusted RFC.  Trusting relationships are fairly simple to setup, although all users you access a trusted RFC must have a certain security profile.  Have a look at the online help:
    [http://help.sap.com/saphelp_nw70/helpdata/EN/d3/5b5c8ac5a93941b9f4e2f09b50beb4/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/EN/d3/5b5c8ac5a93941b9f4e2f09b50beb4/frameset.htm]
    Here is also a blog on the topic:
    [/people/thomas.jung3/blog/2004/08/16/bsp-150-a-developer146s-journal-part-ix--user-authentication-trusted-rfc|/people/thomas.jung3/blog/2004/08/16/bsp-150-a-developer146s-journal-part-ix--user-authentication-trusted-rfc]

  • RFC connection problem

    Hello All,
    We are setting up communication between R/3 4.7 and SCM 5.0 system for EWM (Extended warehouse management) with RFC connection and using IDocs to transfer data from one box to another box.
    IDoc from R/3 to SCM system is working fine, we are able to complete the transactions in SCM system and after successful completion all transaction in SCM it should trigger Idoc for R/3 which is not happening.
    It throws error as <b>"An RFC destination could not be specified for the logical system XXXCLNT123"</b>
    We have checked SM59 (RFC connection), WE20 (Partner profile), WE21 ( IDoc port connection) it seems fine.
    Interesting thing is we are able to get information about stock from R/3 system in SCM system which are correct information.
    Can anyone give some idea if we are missing something to check?
    Thanks & regards
    Arif Mansuri

    Hi Team,
    We have the same problem , which was mentioned above. Please let us know, which Message type need to be used for sending the stock information to ERP after Delivery completion
    The following Process we followed
    PO Creation---ERP
    Inbound delivery-ERP
    Inbound Delivery Process-EWM
    WareHouse Task-EWM
    Unloading-EWM
    WareHouse Task/WareHouse Order Confirmation-EWM
    Once the WT/WO is confirmed , Goods receipt status is updated automatically and "Post Processing Framwork (PPF) status shows with RED and error message says."An RFC destination could not be specified for the logical system E6SCLNT900"
    Here I have one doubt, We have maintained client names as A0000039 (for EWM,but original client name is SC7CLNT100 ) and E6SCLNT900 ( for ERP , original client name also E6SCLNT900)
    Will there be any issue with A0000039?(because we did not maintained as per the original client name ie SC7CLNT100)
    Thank you for your help
    Thank you

  • Trusted RFC connection Problem

    Hello,
    Trusted RFC connection between two systems when the results are negative. The error we get is "You Are Not authorized to logon to the target system (error code 1)." But everything looks smooth (kernel, logfiles, etc.).. S_rfc users and has s_rfcacl objects. Where do you think could be problem?
    RFC trace log files;
    dev_rfc0
    Trace file opened at 20100503 232709 GTB Daylight Time, SAP-REL 700,0,236 R
    ======> You are not authorized to logon to the target system (error code 1).
    ABAP Programm: RSRFCPIN (Transaction: SM59)
    Called function module: RFCPING
    User: P0326 (Client: 100)
    Destination: RFC001 (handle: 2, 21766343, {3CF256DF-FE74-F105-BF85-000C29E0B2F6}
    dev_rfc1
    Trace file opened at 20100503 233011 GTB Daylight Time, SAP-REL 700,0,236 R
    ======> No authorization to logon as trusted system (Trusted RC=1).
    ABAP Programm: SAPLSYST (Transaction: SM59)
    Called function module: ABAP4_LEAVE_TO_TRANSACTION
    User: P0326 (Client: 100)
    Destination: RFC001 (handle: 2, 21951359, {A7F256DF-F7BE-F119-BF85-000C29E0B2F6}
    Trace file opened at 20100503 233115 GTB Daylight Time, SAP-REL 700,0,236 R
    ======> Name or password is incorrect (repeat logon)
    ABAP Programm: RSRFCPIN (Transaction: SM59)
    Called function module: RFCPING
    User: P0326 (Client: 100)
    Destination: RFC001 (handle: 2, 22021687, {D1F256DF-90D2-F15E-BF85-000C29E0B2F6}
    Trace file opened at 20100503 233127 GTB Daylight Time, SAP-REL 700,0,236 R
    ======> You are not authorized to logon to the target system (error code 1).
    ABAP Programm: RSRFCPIN (Transaction: SM59)
    Called function module: RFCPING
    User: P0326 (Client: 100)
    Destination: RFC001 (handle: 2, 22034437, {D8F256DF-78D3-F1BE-BF85-000C29E0B2F6}
    Regards
    ismail

    Hi,
    In addition to the auth object, First make the entry in SMT1 with the normal RFC here the rfc should not be enabled as trusted.
    Then create an entry in the target system as well, one the entries are made in tcode SMT1 in both the systems, then enable both the RFC's as trusted RFC it will work fine then.
    Regards,
    Vamshi.

  • RFC Connection Problem between Production Server & Solution Manager

    Hi,
    I want to make a RFC Connection between Production Server & Solution Manager.
    But when go through Tcode- SM59 and click on Remote Logon from Production to connect Solution Manager it showing me a  Client/Userid/Password window and when i connect go through Solution Manger to Production Server it connects normally. I already done the same process in both the clients, as i already mentioned Logon details in the Logon/Security tab but why it is showing me Client/Userid/Password pad when i am login through Production to SolMan?
    +Tell me where the actual problem is! In my Solution Manager end or in my Production Server end +
    I want to access Solution Manager from Production Server on just clicking once on Remote Logon from Tcode- SM59.
    Thank you.
    Edited by: varun@pcl on Jul 31, 2010 4:40 PM

    Hi
    Mention which Client u login and valid username and password from both PROD Server and Solman .
    https://websmp201.sap-ag.de/support under Solman manager .
    https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000633637&
    Regards

  • Recurring RFC connection problems

    Hi!
    I really need some help. We have been experiencing RFC problems for a few months now and our basis team have no clue as to what the problem might be. The problem is that on a daily basis we experience RFC connection problems. It usually happens at about 7am in the morning and lasts for an hour. After that the problem clears itself and for the rest of the day runs smoothly.
    We clearly see this problem on our RFC connection to the IBM MQ message server which handles all our incoming and outgoing IDOCS. This is however not the only RFC problem as we have also had RFC connection failures when switching between instances in SM51. This suggests to us that it is probably not a network issue, although the MQ server is housed in a different data center than the SAP servers.
    We are running ECC6 and our environment looks like this:
    4 hosts running 5 instances: 3 hosts with one instance and 1 host with 2 instances.
    While this problem is occurring you can do a connection test in SM59 to MQ which is usually successful. In SMGW we have picked up that it is trying to establish multiple connections to MQ, some connects successfully and some cannot connect. In ST11 in the RFC trace files the error message says that the MQ connection times out.
    While monitoring the MQ server we cannot pick up any problems. The MQ server itself seems to run without errors. The only problem is that it cannot connect to SAP to send IDOCS and SAP cannot connect to MQ. The load on the MQ server while this error occurs is minimal compared to the rest of the day.
    Does anyone have any ideas as to what the problem might be? Are there any other places other than the ones mentioned in this mail where we can check for errors?
    Thank you in advance!
    Iwan

    Hi Marcelo,
    In SM59, just select the RFC and above in same screen you can see the options
    RFC----- Display Trace (Shift + F8)
    Check the trace file and see if there is any connection problem between the two system.
    Regards,
    Ravi

  • GTS RFC Connection problem

    Hi,
    I am not able to transfer data from R/3 to GTS. Getting message "No RFC destination is defined for GTS".
    i have defined and assigned the GTS logical system, maintained RFC calls, method calls and ALE distribution model. Still getting same message.
    RFC connection test is working fine.
    Can somebody please help on this?
    Thanks
    Bob

    > I am not able to transfer data from R/3 to GTS. Getting message "No RFC destination is defined for GTS".
    Where do you get that error message?
    Markus

  • RFC connection problem in ECC 4.7 and ECC 6.0

    Hello friends,
    Created RFC connection in 4.7 version of SAP and used it in a java program.  (STFC_connection) was the function module used.
    it all worked fine. Later when i tried the same thing in ECC 6.0 it failed and throws communication_failure exception .
    please guide me in this issue.

    Hi...
    Check the Unicode/Non unicode status in MDMP&UNICODE  tab present in transaction SM59 while chking the connection.
    if your ECC6.0 is unicode system then you need to check the radio button present for Unicode in  MDMP&UNICODE   tab.
    Regards,
    Lokeswari.

  • Error RFC Connection

    Hi Gurus,
    I have a problem when i try to do a RFC connection Between SAP and Windows, this's the error message log Tx, sm59..
    EntrSist.     Error de conexión
    Det.error     / CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=236 SAP gateway connection failed. I
    Det.error     ERROR: SAP gateway connection failed. Is SAP gateway started?
    Det.error     LOCATION: SAP-Server devinc_ICT_02 on host devinc (wp 1)
    Det.error     COMPONENT: CPIC
    Det.error     COUNTER: 6
    Det.error     MODULO:
    Det.error     LINE:
    Det.error     CÓD.RETORNO: 236
    Det.error     SUBRC: 0
    Det.error     RELEASE: 700
    Det.error     TMP.: Tue Aug 31 11:13:57 2010
    Det.error     VERSIÓN:

    Anup,
    the entry sapmsDEV is missing in your "services"-file on the computer that hosts your SLD-Server/J2EE WAS. Windows locates it at %WINDIR%/system32/drivers/etc, unix usually at /etc/.
    make an entry like that:
    sapmsDEV   3600/tcp (in case, your Systemnumber is 00, otherwise replace the "00" with your actual systemnumber)
    kind rtegards, achim

  • RFC connection error for PS_ACCESS_1 and PS_ACCESS_2

    dear all,
    i have created the RFC destination PS_ACCESS_1 and PS_ACCESS_2 with TCP/IP. i also installed WDPS* files in *sapgui\ps\access folder. now i m checking for 'TEST CONNECTION' in sm59 for PS_ACCESS_1 and PS_ACCESS_2 but it is giving  'Error when opening an RFC connection' this error. pls suggest the solution for this problem.
    am i missing any other settings? i m using SAP ECC 6.0. is it comfortable with this? is it required any configuration from basis side?
    regards,
    vicky.

    HI,
    please check the RFC Trace File at SM59 -> RFC -> Show trace file.
    For better tracing delete the Trace File first and recheck the RFC Dest.
    Regards,
    Gordon

  • RFC connection Error

    Dear All,
        when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur  in particular instance .(Other instance working fine in BI system)
    Logon     Connection Error
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: timeout during allocate
    Error Details     LOCATION: SAP-Gateway on host chwslp05 / sapgw01
    Error Details     DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
    Error Details     COMPONENT: SAP-Gateway
    Error Details     COUNTER: 162003
    Error Details     MODULE: gwr3cpic.c
    Error Details     LINE: 1973
    Error Details     RETURN CODE: 242
    Error Details     SUBRC: 0
    Error Details     RELEASE: 700
    Error Details     TIME: Mon Apr 27 14:29:33 2009
    Error Details     VERSION: 2
    Any one please suggest.
    Thanks,
    Thirumoorthy.

    mostly your gateway servicve is not working check smgw tcode on that instance
    you can do this goto sm59->select the instace execute tcode smgw
    easy way is restart the instance
    it will start working
    Samrat

  • RFC Connection Error (for end-to-end Monitoring)

    Hi,
    I am configure End-to-End monitoring in XI 3.0 SP20, PMI does't show data in end-to-end monitoring... anyway!!! I check RFC connection PMI
    RFC destination name: PMIXQA90020080827
    in TEST connection I am getting an error: "Group PUBLIC not Found" where may I define that PUBLIC to solve this problem please let me know.... thanks
    and what is Group PUBLIC in RFC ??? what does it do???
    Is there any notes I can read for related issue, please help me out this
    Thanks a lot in advanced
    Edited by: issue2008 issue on Aug 28, 2008 10:03 AM

    Thanks for reply... SURE I can tell you
    Connection Type: 3 R/3 connection
    ScreenShot shows blow:
    http://www.flickr.com/photos/25222280@N03/2806290586/sizes/o/
    Thanks
    Edited by: issue2008 issue on Aug 28, 2008 10:20 AM

Maybe you are looking for