Problem in running a program in Background

Hi Guys,
Execution of a report interactively gave no errors. We tried to schedule job in background, with variants for the respective cases. But this resulted in the
following error in the joblog: "Error in function module POPUP_TO_CONFIRM"
I know this function module expects a user input.How can I supress this
dialog when I run the report in background.
Thanks and Regards,
Rajan

you have to check before the FM call is the report runs in background/foreground:
IF sy-batch IS INITIAL.
=> foreground, you cam call POPUP_TO_CONFIRM.
ELSE.
=> background
ENDIF.

Similar Messages

Problem while running the program in background

hi SDNs,
i have problem while i run report in background. in background, last three columns are not appearing in the report. whereas it showing all columns in foreground.
i have increased the line-size, even then it is giving truncating last some columns.
could you any one pls help me out, what to do ?
Thanking you,
Ramakrishna S

hi prakash ramu,
even it is not working. it is directly talking me to spool request..
i think it is not possible, while ur running the report in background.,
any how if possible could u pls send me the code...
thanks
ramu

To run a program in BACKGROUND using SUBMIT

I need to run a program in background using the SUBMIT option. Here i have to pass an internal table form one program to another which will be used to update sales orders using BDC.
Questions
1} Can we execute a program in background using SUBMIT?
2} I am sending data to a MEMORY ID , if i run the program in background will the memory id work. As in do memory IDs work in the background.
Thanks in Advance

refer same thread.
Re: Problem with SUBMIT in Background

How to run a program in background?

Hi abapers,
I want to run a program in background using sm36 and sm37.But i am not aware of input in that tansaction.So kindly tell me the steps ho run a program in background.
Regards
Ansuman

Hi Ansuman Parhi,
by useing T-codes
First go to transaction SM36 to schedule the job.
When you enter the "Start condition" for job, do as follow.
Select processing by "Date/Time".
Enter date as current date.
Let us say you are scheduling this job today then give date 08/30/2007.
Check "periodic job" checkbox.
Hit "periodic value" button and select to run "Daily"
Also have a look on below thread
Re: How to run program in background?
This is how to do it through code
data: lv_job_name like tbtco-jobname,
lv_job_nr like tbtco-jobcount,
lv_job_released type c,
lv_job_start_sofort type c,
lv_print_parameters type pri_params.
lv_job_name = 'Z_test'. " your background program name
call function 'JOB_OPEN'
exporting
jobname = lv_job_name
importing
jobcount = lv_job_nr
exceptions
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
others = 4.
if syst-subrc = 0.
*submit job with all the selection screen params...
submit (lv_job_name)
with applfile = applfile
with p_lines = p_lines
with rfc_dest = rfcdest
with p_selmtd = lv_selmtd
with px_shsim = px_shsim
with px_sherr = px_sherr
user syst-uname
via job lv_job_name number lv_job_nr and return.
if sy-subrc = 0.
call function 'JOB_CLOSE'
exporting
jobcount = lv_job_nr
jobname = lv_job_name
strtimmed = 'X'
importing
job_was_released = lv_job_released
exceptions
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
others = 8.
if syst-subrc 0.
message i162(00) with
'An error occured while closing the background job.'.
stop.
endif.
endif.
endif.
skip 1.
write: / 'Background process', lv_job_name ,
'called successfully' no-gap.
write: / 'You can check the job in transaction SM37'.
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

I have a problem in processing the program in background

Hi,
We have cloned the T'code V_V2 and added some additional functionality and when we try to run the program in background the error is blocking the process
This is because, say example i am tring to process the sales order in production systen through my program ,in that time some one may chage the sales document . in trhis case my program should not blocked it should check the block before processing and then it should proceed.
is there any FM to find the blocked sales order.
Regards,
Vijay

Try using the FM:
ENQUE_READ2
Passing the follwing values:
GNAME --> VBAK (Sales Order header table)
GARG   --> The lock argument
                   (This will be a combination of client number anb Sales Order No.
                    Eg: '3001210000054' where the first three digit i,e 300 is the client No
                   and 1210000054 is the sales order no.)
Regards,
Firoz.

How to run a program in background and how to check the output

I have to run my program as background job... it has a selection screen...... and i need to check the output after its complete.

hi,
u need to create one program for this.
tables:btcevtjob.
parameters:job(32).
data:count like btcevtjob-jobcount.
call the function modules JOB_OPEN,JOB_SUBMIT AND JOB_CLOSE
and pass the parameters in those function modules.
once u execute this program,
go with sm37->provide jobname->select the option scheduled
->execute
selct the entry->go with release option.
under releasae select immediate option
save
select the job name again
go with release
status is in finished stage
now go with spool option
give spool no
go for display
o/p displayed.
before this,go for se38->provide the name of program which u want to run in back ground->seelct variants->change->provide variant name->go for create->provide input value->go with attributes->provide description->save
this variant name u have to give in the job_submit fm.
or
se38->program->execute->in back ground
Reward points if useful,
Thanks,
Usha

Problem in running a program installed in SD Memor...

Hi,
I'm having problem to run an installed program in the SD card. When a choose to install a new program in the SD card, it work fine, after finish the intall process I can run the application with no problem. But after I shutdown the phone and start it again I can't run the application no more, the icon appears in the screen but I click on it and nothing happens. When I install the same application in the Phone Memory I don't have this problem, It always starts. Could some one help me to solve this problem.
Thanks.

Hi,
You said that after ejecting the SD card and
inserting it again,you can run the program from
the SD card. This means that the issue has been
solved. But if still persists, check the "Running
applications menu" and see whether there are programs
running in the background. If you see running programs,
delete them, because running programms can sometimes
cause similar problems.
Regards.
Fattan
Message Edited by fattan on 11-Sep-2008 07:32 PM

Problem with running a program under Labview 8.6

Hello,
I am writing you this to ask for your technical support to fix the problem I am facing at our Lab at University of California, Irvine.
Ms. Vanessa Trujillo has kindly come to our lab a couple of times and tried different things to resolve the issue, but unfortunately the issue is not resolved yet. Here is a summary of the problem:
We used to use Labview 6.1 for our fatigue testing and data acquisition.
Our
program worked just fine under the 6.1 version We recently upgraded our software to Labview 8.6. We have also purchased a new computer that has higher capacity than what your website requires for Labview 8.6. The new computer has Windows Vista We transferred our old program/subprograms from the old computer under Labview
6.1 to the new computer with labview 8.6. However our program that worked fine with the 6.1 version is not working with the updated version (ver 8.6).
There
are 6 errors in the error list. It appears there are six files of my program missing under the new version, even though we transferred all files.
The software searches for those files but can't find them.
        For example one the box pops up indicates:
        loading:
                    <vlib>:\Daq\lvdaq.dll
        searching:
                    C:\Program Files\National Instrument\LabVIEW 8.6\instr.lib\Agilent34401\public\utility
        I get several message like this. I have to cancel/ignore them all to be able to open the program.
When we go to VI's under Measurement I/O there is nothing (empty).
We use a PCI-MIO-16XE-50 for our data acquisition During Labview installation on the new computer, I was asked if I wanted to install the device drivers. I had two options, "Now" or "Later", I picked Now but I didn't have the DVD's/CD's for the device drivers. Therefore I had to select later to complete my software installation Later after Labview 8.6 installation, we installed the device drivers (traditional Ni DAQ and Ni DAQmx) from the two old CD's we had in our lab from a couple of years ago (the CD's were Ni DAQ 7). after installation, the PCI board on the computer was recognized by the device driver. However we still could not run our program under the new version of Labview (same situation and the same messages) I called 1-866-275-6964 on 9/2/08 and talked to Grant (service number:
1228841). He recommended that I download and install the updated version of device drivers.
Since I didn't have the DVD/CD for updated device drivers, I contacted Vanessa Trujillo. She gave me the DVD for the updated Ni DAQ (Traditional and mx).
But
when I tried to install the updated device drivers I got a message something like "some unsupported filed have been detected,..." so the updated device
drivers were not installed. It should be noted that up to here we still had the Ni DAQ (traditional and mx) installed on the computer from our old CD's (Ni DAQ 7).
Vanessa and I talked to Tom at the technical support department. He recommended that we download and install the Beta xx version for Ni DAQ since we were using Windows Vista. Mike put the Beta software on the Ni website/outgoing so I could download and install it. He asked me to uninstall the traditional Ni DAQ that we had on our computer from the older CD's. He
asked me not to un-install the Ni DAQmx (that we had installed from the old
CD). I was able to download the Beta software, however I could not install it since I got a similar message that some unsupported files were detected.
Right now we don't have any version of traditional Ni DAQ installed on the
computer but the NI DAQmx (from old Ni DAQ 7) is still installed on the computer. Vanessa let me borrow her new Ni DAQ DVD but as I explained I am not able to install the device drivers.
Vanessa - Did I miss anything?
Please advise. My cell number is 619-778-2033. I will be at our lab at UC,
Irvine at 2:00pm (CA/Pacific time). Please call if you have any questions.
Thank you

To me, it looks like you are missing some of the drivers and subVI's used in your program.
Whatever device you are using to measure fatigue or any other device probably came with a driver.
You need all of these drivers installed on this new computer.
Also, any subVI's and libraries you use in the program must also be installed on the new computer.
Whenever you get a message that says you are missing some component (the ones that you said you press 'ignore'),
see if you can find that library or subVI on the older computer. If so, save it to something so you can transfer them to the new computer.
Cory K

Running BDC program in background for the transaction VL02N

Hi All,
I have coded a BDC program (call transaction method) for the transaction code VL02N. I can able to run the program manually & successfully. But if I execute the program in background(SM36), it is going to dump giving CNTL_ERROR.
Note: I am not using any of the GUI_UPLOAD, GUI_DOWNLOAD funciton modules in the program. But I am using the FTP command funtion modules like( FTP_COMMAND, FTP_CONNECT, FTP_DISCONNECT and FTP_SERVER_TO_R/3).
<removed_by_moderator>
Thanks in advance.
Ramesh.
Edited by: Julius Bussche on Jul 8, 2008 5:55 PM

VL02N is an enjoy transaction. You cant run it in background. Please try VL02.
Thanks
Romit

Problem while running client program in Netbeans4.0

Hi,
I am facing the following problem while running a client program in Nebeans4.0.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x7C9012B4
Function=RtlInitAnsiString+0x1B
Library=C:\WINDOWS\system32\ntdll.dll
Current Java thread:
at java.net.Inet4AddressImpl.lookupAllHostAddr(Native Method)
at java.net.InetAddress$1.lookupAllHostAddr(InetAddress.java:770)
at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1059)
at java.net.InetAddress.getAllByName0(InetAddress.java:1009)
at java.net.InetAddress.getAllByName0(InetAddress.java:981)
at java.net.InetAddress.getAllByName(InetAddress.java:975)
at weblogic.rjvm.RJVMFinder.getDnsEntries(RJVMFinder.java:370)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:181)
- locked <0x1007ff78> (a weblogic.rjvm.RJVMFinder)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:125)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:291)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:234)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:135)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
at javax.naming.InitialContext.init(InitialContext.java:219)
at javax.naming.InitialContext.<init>(InitialContext.java:195)
at AcfClient.getHomeRef(AcfClient.java:73)
at AcfClient.forceSession(AcfClient.java:43)
at AcfClient.main(AcfClient.java:34)
Dynamic libraries:
0x00400000 - 0x00406000      C:\Data\j2sdk1.4.2_04\jre\bin\java.exe
0x7C900000 - 0x7C9B0000      C:\WINDOWS\system32\ntdll.dll
0x7C800000 - 0x7C8F4000      C:\WINDOWS\system32\kernel32.dll
0x77DD0000 - 0x77E6B000      C:\WINDOWS\system32\ADVAPI32.dll
0x77E70000 - 0x77F01000      C:\WINDOWS\system32\RPCRT4.dll
0x77C10000 - 0x77C68000      C:\WINDOWS\system32\MSVCRT.dll
0x08000000 - 0x08138000      C:\Data\j2sdk1.4.2_04\jre\bin\client\jvm.dll
0x77D40000 - 0x77DD0000      C:\WINDOWS\system32\USER32.dll
0x77F10000 - 0x77F56000      C:\WINDOWS\system32\GDI32.dll
0x76B40000 - 0x76B6D000      C:\WINDOWS\system32\WINMM.dll
0x6BD00000 - 0x6BD0D000      C:\WINDOWS\system32\SYNCOR11.DLL
0x10000000 - 0x10007000      C:\Data\j2sdk1.4.2_04\jre\bin\hpi.dll
0x00390000 - 0x0039E000      C:\Data\j2sdk1.4.2_04\jre\bin\verify.dll
0x003B0000 - 0x003C9000      C:\Data\j2sdk1.4.2_04\jre\bin\java.dll
0x003D0000 - 0x003DD000      C:\Data\j2sdk1.4.2_04\jre\bin\zip.dll
0x02DA0000 - 0x02DAF000      C:\Data\j2sdk1.4.2_04\jre\bin\net.dll
0x71AB0000 - 0x71AC7000      C:\WINDOWS\system32\WS2_32.dll
0x71AA0000 - 0x71AA8000      C:\WINDOWS\system32\WS2HELP.dll
0x71A50000 - 0x71A8F000      C:\WINDOWS\System32\mswsock.dll
0x76F20000 - 0x76F47000      C:\WINDOWS\system32\DNSAPI.dll
0x76FB0000 - 0x76FB8000      C:\WINDOWS\System32\winrnr.dll
0x76F60000 - 0x76F8C000      C:\WINDOWS\system32\WLDAP32.dll
0x66210000 - 0x66219000      C:\WINDOWS\system32\netware\NWWS2NDS.DLL
0x50D50000 - 0x50D95000      C:\WINDOWS\system32\NETWIN32.DLL
0x50D00000 - 0x50D15000      C:\WINDOWS\system32\CLNWIN32.DLL
0x50DF0000 - 0x50E10000      C:\WINDOWS\system32\LOCWIN32.DLL
0x50DB0000 - 0x50DD9000      C:\WINDOWS\system32\NCPWIN32.dll
0x71AD0000 - 0x71AD9000      C:\WINDOWS\system32\WSOCK32.dll
0x66220000 - 0x6622C000      C:\WINDOWS\system32\netware\NWWS2SLP.DLL
0x1C000000 - 0x1C007000      C:\WINDOWS\system32\NWSRVLOC.dll
0x76C90000 - 0x76CB8000      C:\WINDOWS\system32\imagehlp.dll
0x59A60000 - 0x59B01000      C:\WINDOWS\system32\DBGHELP.dll
0x77C00000 - 0x77C08000      C:\WINDOWS\system32\VERSION.dll
0x76BF0000 - 0x76BFB000      C:\WINDOWS\system32\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation total 576K, used 497K [0x10010000, 0x100b0000, 0x104f0000)
eden space 512K, 89% used [0x10010000, 0x10083158, 0x10090000)
from space 64K, 57% used [0x100a0000, 0x100a9478, 0x100b0000)
to space 64K, 0% used [0x10090000, 0x10090000, 0x100a0000)
tenured generation total 1408K, used 129K [0x104f0000, 0x10650000, 0x14010000)
the space 1408K, 9% used [0x104f0000, 0x10510438, 0x10510600, 0x10650000)
compacting perm gen total 4096K, used 2122K [0x14010000, 0x14410000, 0x18010000)
the space 4096K, 51% used [0x14010000, 0x14222828, 0x14222a00, 0x14410000)
Local Time = Fri Aug 26 10:26:03 2005
Elapsed Time = 2
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_04-b05 mixed mode)
# An error report file has been saved as hs_err_pid1280.log.
# Please refer to the file for further information.
Can anyone pls let me know what could be the problem.
Thanks in adv.

Hi,
This type of error
java.lang.NoClassDefFoundError: javax/naming/Context
will occur when the client program could not able to locate lib/j2EE.jar file.
So set the classpath correctly and make sure that you have correctly defined the JAVA_HOME environment variable in .bat script.
Hope this will help you.
Regards,
Anil.
Technical Support Engineer.

Problems in running SQLJ programs!

Dear SQLJ Support,
I am not able to run SQLJ programs. I am able to compile a .sqlj file.
I tried to compile the demo programs, for example, TestInstallCreateTable.java. I get
"Class oracle.sqlj.runtime.Oracle not found in import" error.
"Class sqlj.runtime.ref.DefaultContext not found in import" error.
When I try to run the other Demo programs also, I am getting errors at places where I import classes from translator.zip. Is there a problem with the JDBC Drivers?
I have set the classpath set to
ORACLE_HOME/sqlj/lib/translator.zip, where the classes are found
ORACLE_HOME/jdbc/lib/classes111.zip, where the JDBC classes are found
JAVA_HOME/lib/classes.zip, where the core java classes are found
I am using Oracle 8.1.6, SQLJ 8.1.6, JDK 1.1.8 on Windows NT 4.0.
Am I missing something else? Kindly advice. Thanks in advance.
Regards,
Radha.

You might wanna try changing the Look and Feel of the swing application. Test it on default, Windows, Mac and Motif interface.... and do post if it works on changing the look and feel.
cheerz

Run java program in background

I want to run a java program in background in windowsXP...can anyone help please......can anyone suggest an easy software for running java program as windows service...i tried one but without any success

How many of the links here have you tried while you were waiting for an answer?
http://www.google.com/search?q=running+java+program+as+windows+service
(Note that the query is a direct copy/paste from your post.)

How tu run the program in background

Hi SapAll.
actually iam new to ABAP ,i just want to know on how i can run the particular program in background .
can any one explain me in steps .
i also want to know on how to delete the particular job which has been already created in sm36 .
will be waiting for best response.
regards.
Varma

Hi
Find the below steps to be defined.
1. Go to SM36 -
> Give the Program Name
2. If you have priority defined that to in Job class
3. Click -
> Start Condition
4. Select Data/Time Tab
5. Give the Date and Time for the job execution. (If you want to certain intervale provide it)

Run the program in Background

Hello All,
I have selection screen where i have parameters for programs, classes and filename.
When i give program name and filename and execute. A Popup appears and asks the path for the file to be saved in xml format. This is done through foreground. It is working correctly in foreground and the file saves in xml format in specified location.
I have tried using the JOB Schedule for background but it is not working.
My requirement is to do the same process in background. How can i achieve the same process as foreground for the given programs and classes to save the file in xml format through background process.
Could anybody help me in this issue.
Thanks

Hello Indrakaran Reddy,
You cannot run the programs which involves the user intervention,pop-up displays etc., in the background mode.
For this, you need to have the file in the application server not on the desktop(presentation server).
Once, your file is in the application server, give the class and path of the file in the selection screen and then save it as a variant.
Then, schedule the program in the background using the transaction SM36.
This is how it works. Hope you understood the concept clearly.
Thanks,
Babu Kilari

Running a program in background

Dear all,
I have to execute a database upload program in background while clicking a pushbutton.
Ho to do this ?
<b>note : No input parameters for the program</b>.

when 'Update'.
perform update.
and in the perform , u have to put a logic to upload DB table.
Regards
Prabhu

Problem in running a program in Background

Similar Messages

Maybe you are looking for