Problem in running batch input session

Hello Guys i developed a lsmw object .in step 13 after executing create batch inputsession a session is created and i can see the session created but when i go to step 14 run batch input session .i couldnt find session there and eventually can not run session can any body help me please .

Hi priya,
in 13step session is created for test data.
if session is created the message will be display like this " 1 batech input n number of record are created".
if like message will display 14th step automatically run the session ifnot there is problem with in u flat file or miss match with some fileds.
check it corrected than run the u lsmw project.
i think now it will work.
Reward is usefull.
Thank's.
Patil

Similar Messages

LSMW Issue at step -Run Batch Input Session

Dear gurus,
While uploading service master through lSMW while processing the system prompts a message specifying "Buffertable not upto date" at Run Batch Input Session step .So please investigate what is missing/wrong.
Wirth regards,
Raj

I dont think that this has directly something to do with LSMW.
It is more related to the transaction your try to post in the batch input.
Search OSS with the error message number. I had seen some notes for number SE001, but your message is actually twice in the message table, and you did not tell the message number.
If it is message SE001, then you may find programm corrections in OSS.
Otherwise just log out and in again and try, or open a message at OSS yourself if the problem still persists

What are the problems in processing batch input sessions?

hi,
What are the problems in processing batch input sessions? How is batch input process different from processing on line?
regards.

sorry, question resolved.

Running Batch Input sessions in One program

Hi Guys.
I am sure this question might have come up before. Reall y need quick help in this hence posted the same.
I need to develop a program which creates several batch input sessions.
At the end of the program all these sessions should ve triggerred in the background.
Please let me know if this can be done and if yes can someone send me psuedocode for same.
This is very urgent.
thx

Hi Vijay,
Using the following function modules you can create a batch input session.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
Example - http://www.sap-img.com/abap/auto-disallowed-back-posting-to-previous-period.htm
You can use the program RSBDCSUB to schedule batch input sessions in background.
http://www.sap-img.com/abap/learning-bdc-programming.htm - How to write BDC program
Executing batch-input sessions in background jobs - Example for how to call the bdc session.
Hope these are helpful.
Thanks
Vinod

Problem while executing Batch Input session

HI All,
I am creating batch input session for transaction FB01.After creating the sesson when I am trying to execute it, its giving me the pop up "Session XYZ is being processed by user" and doesnt allow to excute it.
Pease suggest me the solution on this.
I have tried using "COMMIT WORK" , " COMMIT WORK AND WAIT", but it is not working.
Regards
Saurabh

HI Saurabh
I guess you are trying to process a session which already being processed. You can check the session that are currently in processing state via tab "In Processing". We an process the sessions that are in "New" or "Incorrect" State.
Kind Regards
Eswar

I am getting an error while running Batch input session.

While running BDC getting error that "Enter Discount Base, Automatic calculation not possible". I checked all the settings at company code level, tax code settings, document type settings. I am not getting it. While doing mannual posting the error is not coming.
Please help me on this.

Hi,
While creating Material master sometime warning message will come for some materials . So while doing the LSMW Recording method it will record howmany times you are entering the "Enter" key also. So while doing batch input fome article it may stop at some point, so better run the LSMW in foreground and check were it stops exactly.
Regards
GK.

Can we run batch input session in foreground as well as in background

Hi SAP Gurus,
I have 23000 records to transfer from one gl account to other gl.
I want to run the session in foreground for 5 transactions and the rest will be processed in background. Is there any setting through which I can do it.
I mean to say the first 5 transactions will be processed in foreground as soon as the process starts and after that it will automatically goto background processing for the remaing records. This i desire for a check.
Regards,
Anirban

Hello Anirban,
Check the below program to split the number of session based number of records in file .
suppose if you enter 10,000 in selection-screen,if you have 30,000 records in file,then it creates 3 session each session will have 10,000 records.
I had requirement like i get 2,00,000 records at a time ,if i process all records using session method ,after 20,000 records i get short dump due to performance.
i created logic into number of session ,i guess it helps you.
Report : ZMPPC015
Type : Data upload
Author : Seshu Maramreddy
Date : 05/26/2005
Transport : DV3K920025
Transaction: ??
Description: This ABAP/4 Program to Create Planned Independent
 Requirement for SMI plants using MD61 Transaction.
 It accepts tab-delimited spreadsheet input and
 creates BDC sessions.
report zmppc015 no standard page heading
 line-size 120
 line-count 55
 message-id zz.
Constants
constants : c_x type c value 'X'," Dynbegin
 c_tcode type tstc-tcode value 'MD61'." Transaction Code
Variables
data : v_lines_in_xcel like sy-tabix,
 l_tabix like sy-tabix,
 v_trans_in_ssn type i,
 v_ssnnr(4) type n," Counter
 v_ssnname like apqi-groupid,
 v_matnr(18) type c. " Material Number
Internal Tables
Internal table for file
data : begin of t_file occurs 0,
 matnr(18) type c, " Material Number
 berid(10) type c, " MRP Area
 PLNMG01(17) type n, " Forecast Month -01
 PLNMG02(17) type n, " Forecast Month -02
 PLNMG03(17) type n, " Forecast Month -03
 PLNMG04(17) type n, " Forecast Month -04
 PLNMG05(17) type n, " Forecast Month -05
 PLNMG06(17) type n, " Forecast Month -06
 PLNMG07(17) type n, " Forecast Month -07
 PLNMG08(17) type n, " Forecast Month -08
 PLNMG09(17) type n, " Forecast Month -09
 PLNMG10(17) type n, " Forecast Month -10
 PLNMG11(17) type n, " Forecast Month -11
 PLNMG12(17) type n, " Forecast Month -12
 WERKS(4) TYPE C, " Plant
 end of t_file.
Internal table for BDCDATA Structure
data : begin of itab_bdc_tab occurs 0.
 include structure bdcdata.
data : end of itab_bdc_tab.
Selection-screen
selection-screen: skip 3.
selection-screen: begin of block id1 with frame.
parameters: p_name like rlgrap-filename
 default 'C:\My Documents\InputFile.txt'
 obligatory,
bdc session name prefix
 p_bdcpfx(6) default 'ZPIRCT'
 obligatory,
number for transction per BDC session
 p_trnssn type i
 default 2000 obligatory,
retain the BDC session after successfull execution
 p_keep like apqi-qerase
 default c_x,
user who will be executing BDC session
 p_uname like apqi-userid
 default sy-uname
 obligatory.
selection-screen : skip 1.
Requirement type
parameters : p_bedae like t459u-bedae,
From Date
 p_date like sy-datum default sy-datum obligatory.
selection-screen: end of block id1.
at selection-screen on value-request for p_name.
F4 value for Input file
perform filename_get.
main processing
start-of-selection.
To get the data from file to Internal table
perform getdata_fromfile.
loop at t_file.
hang on to xcel line num
 l_tabix = sy-tabix.
if num-of-trnas-in-session = 0, create new BDC session
 if v_trans_in_ssn is initial.
 perform bdc_session_open.
 endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
 perform bdc_build_script.
insert the bdc script as a BDC transaction
 perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
 add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
 if v_trans_in_ssn = p_trnssn or
 l_tabix = v_lines_in_xcel.
 perform bdc_session_close.
 clear v_trans_in_ssn.
 endif.
clear t_file.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
*& Form filename_get
 F4 Value for input file
FORM filename_get.
CALL FUNCTION 'WS_FILENAME_GET'
 EXPORTING
 DEF_PATH = 'C:\Temp\ '
 MASK = ',.,..'
 MODE = 'O'
 TITLE = 'Select File '(007)
 IMPORTING
 FILENAME = p_name
 EXCEPTIONS
 INV_WINSYS = 1
 NO_BATCH = 2
 SELECTION_CANCEL = 3
 SELECTION_ERROR = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " filename_get
*& Form getdata_fromfile
 Upload the data from file to Internal table
FORM getdata_fromfile.
CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
 FILENAME = p_name
 FILETYPE = 'DAT'
 TABLES
 DATA_TAB = t_file
 EXCEPTIONS
 CONVERSION_ERROR = 1
 FILE_OPEN_ERROR = 2
 FILE_READ_ERROR = 3
 INVALID_TYPE = 4
 NO_BATCH = 5
 UNKNOWN_ERROR = 6
 INVALID_TABLE_WIDTH = 7
 GUI_REFUSE_FILETRANSFER = 8
 CUSTOMER_ERROR = 9
 OTHERS = 10.
if sy-subrc eq 0.
 sort t_file by matnr .
 delete t_file where matnr = ''.
 clear v_lines_in_xcel.
 describe table t_file lines v_lines_in_xcel.
 if v_lines_in_xcel is initial.
 write: / 'No data in input file'.
 stop.
 endif.
else.
 write:/ 'Error reading input file'.
 stop.
endif.
ENDFORM. " getdata_fromfile
*& Form bdc_session_open
 BDC_OPEN_GROUP
FORM bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
CALL FUNCTION 'BDC_OPEN_GROUP'
 EXPORTING
 CLIENT = SY-MANDT
 GROUP = v_ssnname
 KEEP = p_keep
 USER = p_uname
 EXCEPTIONS
 CLIENT_INVALID = 1
 DESTINATION_INVALID = 2
 GROUP_INVALID = 3
 GROUP_IS_LOCKED = 4
 HOLDDATE_INVALID = 5
 INTERNAL_ERROR = 6
 QUEUE_ERROR = 7
 RUNNING = 8
 SYSTEM_LOCK_ERROR = 9
 USER_INVALID = 10
 OTHERS = 11.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " bdc_session_open
*& Form bdc_build_script
 BDC Script
FORM bdc_build_script.
Local Variables
DATA : l_frdat(8) type c, " From Date
 l_todat(8) type c, " To Date
 l_frdat1(4) type c, " Year
 l_frdat2(2) type c, " Month
 l_frdat3(2) type c, " Day
 l_tdate like sy-datum, " Subtract date(1)
 l_todat1(4) type c, " Year
 l_todat2(2) type c, " Month
 l_todat3(3) type c. " Day
 Get the material number from tables ZMSMI_FERR_RAW,
 ZMSMI_SNAP_RAW and ZMSMI_SIMP_RAW
perform get_matnr.
Screen 0100.
perform bdc_screen using 'SAPMM60X' '0100'.
perform bdc_field using 'BDC_OKCODE' '/EBDPT'.
perform bdc_field using 'AM60X-MATAW' 'X'.
perform bdc_field using 'AM60X-MATNR' T_FILE-MATNR.
perform bdc_field using 'AM60X-PRGRP' SPACE.
perform bdc_field using 'AM60X-PBDNR' SPACE.
perform bdc_field using 'RM60X-BERID' T_FILE-BERID.
perform bdc_field using 'AM60X-WERKS' SPACE.
perform bdc_field using 'RM60X-VERSB' '00'.
Converted the date as per MD61 Transaction.
From date
l_frdat1 = p_date+0(4).
l_frdat2 = p_date+4(2).
l_frdat3 = p_date+6(2).
concatenate l_frdat2 l_frdat3 l_frdat1 into l_frdat.
To Date
l_tdate = p_date - 1.
l_todat1 = l_tdate+0(4) + 1.
l_todat2 = l_tdate+4(2).
l_todat3 = l_tdate+6(2).
concatenate l_todat2 l_todat3 l_todat1 into l_todat.
perform bdc_field using 'RM60X-DATVE' l_frdat.
perform bdc_field using 'RM60X-DATBE' l_todat.
perform bdc_field using 'RM60X-ENTLU' 'M'.
Screen 0127
perform bdc_screen using 'SAPMM60X' '0127'.
perform bdc_field using 'BDC_OKCODE' '=WEIT'.
if p_bedae is initial.
 perform bdc_field using 'T459U-BEDAE' space.
else.
 perform bdc_field using 'T459U-BEDAE' P_BEDAE.
endif.
Screen 0100.
perform bdc_screen using 'SAPMM60X' '0100'.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_field using 'AM60X-MATAW' 'X'.
perform bdc_field using 'AM60X-MATNR' T_FILE-MATNR.
perform bdc_field using 'AM60X-PRGRP' SPACE.
perform bdc_field using 'AM60X-PBDNR' SPACE.
perform bdc_field using 'RM60X-BERID' T_FILE-BERID.
perform bdc_field using 'AM60X-WERKS' SPACE.
perform bdc_field using 'RM60X-VERSB' '00'.
perform bdc_field using 'RM60X-DATVE' l_frdat.
perform bdc_field using 'RM60X-DATBE' l_todat.
perform bdc_field using 'RM60X-ENTLU' 'M'.
Screen 0200
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG01.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG02.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG03.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG04.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG05.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG06.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG07.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG08.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG09.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG10.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=S+'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG11.
perform bdc_screen using 'SAPLM60E' '0200'.
perform bdc_field using 'BDC_OKCODE' '=SICH'.
perform bdc_field using 'RM60X-PLN01(01)' T_FILE-PLNMG12.
ENDFORM. " bdc_build_script
*& Form get_matnr
 Get the material number from tables ZMSMI_FERR_RAW,
 ZMSMI_SNAP_RAW and ZMSMI_SIMP_RAW
FORM get_matnr.
clear v_matnr.
case t_file-werks.
 when '0101'.
 select single cmatnr from zmsmi_simp_raw
 into v_matnr where matnr = t_file-matnr.
 if sy-subrc eq 0.
 clear t_file-matnr.
 t_file-matnr = v_matnr.
 endif.
 when '0103'.
 select single cmatnr from zmsmi_ferr_raw
 into v_matnr where matnr = t_file-matnr.
 if sy-subrc eq 0.
 clear t_file-matnr.
 t_file-matnr = v_matnr.
 endif.
 when '0102' or '0110' or '0111' or '0112' or '0113'
 or '0114' or '0115' or '0116' or '0117'.
 select single cmatnr from zmsmi_snap_raw
 into v_matnr where matnr = t_file-matnr.
 if sy-subrc eq 0.
 clear t_file-matnr.
 t_file-matnr = v_matnr.
 endif.
endcase.
ENDFORM. " get_matnr
*& Form bdc_screen
 BDC Script for Screen fields
 -->P_PROG Program name
 -->P_SCRN Screen Number
FORM bdc_screen USING p_prog
 p_scrn.
clear itab_bdc_tab.
itab_bdc_tab-program = p_prog.
itab_bdc_tab-dynpro = p_scrn.
itab_bdc_tab-dynbegin = c_x.
append itab_bdc_tab.
ENDFORM. " bdc_screen
*& Form bdc_field
 BDC Script for Screen fileds
 -->P_NAM Field name
 -->P_VAL Field value
FORM bdc_field USING p_nam
 p_val.
clear itab_bdc_tab.
itab_bdc_tab-fnam = p_nam.
itab_bdc_tab-fval = p_val.
append itab_bdc_tab.
ENDFORM. " bdc_screen
*& Form bdc_submit_transaction
 BDC_INSERT Function Module
FORM bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
 EXPORTING
 tcode = c_tcode
 TABLES
 dynprotab = itab_bdc_tab
 EXCEPTIONS
 internal_error = 01
 not_open = 02
 queue_error = 03
 tcode_invalid = 04.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
refresh itab_bdc_tab.
ENDFORM. " bdc_submit_transaction
*& Form bdc_session_close
 text
FORM bdc_session_close.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
skip 2.
if sy-subrc ne 0.
 write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
 write : / 'Session created:', v_ssnname,
 50 '# of transactions:', v_trans_in_ssn.
endif.
ENDFORM. " bdc_session_close
Thanks
Seshu

Error when running Batch Input session for T code F.05

When I am executing Foreign Currency Revaluation using the T Code F.05, I am unable to post the documents for Foreign Loss or gain, as these GL accounts have been defined as cost Element.
Can any one suggest how to generate postings.
Phani

Hi Phani,
This error could be becuase you have created the P&L gl accounts for forex gain and loss as cost element and you have not done the automatic assignment of cost Center to these GL accounts. Please do the necessary cost center assignment to T Code OKB9. Identify the PL gl accounts related to forex gain and loss and assign cost center.
Hope this solves the problem
Regards
Paul

Error while Running BRS Batch input session

Dear Gurus,
When i am running Batch input session after BRS statement posted, system giving Error message:
No batch input data for screen SAPDF05X 3100
Entered, saved and posted the statement. after that while processing session getting error like this........How to overcome.
Can we post statement directly without creating session.
Regards,
Venkat

Hi,
The ABAP Counterpart has to build an exception handling for this particular message.
Normally these messages occur either after an upgrade or after a change in the account(different filed status)
Provide points if usefull.
Thanks,
Praveen

Batch Input Sessions

Hai all,
What are the problems in processing batch input sessions and How is batch input process different from processing online?
Thanks in Advance,
Swapna.
Edited by: NagaSwapna Thota on Jun 24, 2008 3:11 PM

hi swapna
go through this link hope u find ur answer
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=problemsinbatchinputsession&cat=sdn_all
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=processing+batchinput+session&cat=sdn_all
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=problemsprocessingbatchinput+session&adv=false&sortby=cm_rnd_rankvalue
reward if helpful...
Cheers
Snehi

Batch input session is not created

hello iam migrating inventory balance using standard batch input method .when iam running batch input session it is not created so nothing getting transfered.
and also when i uploaded the flat file and execute step read data it is showing 10 items but when execute next step show read data is showing only 1 item record.
can any one help with this thanks in advance.
Regards
priya

i got the answer i dint execute process overview after creating seesion

Regarding document type in batch input session

Hi,
when i run int.cal. (f.16) it is calculating perfect and posting also perfect using TC FB01 when i run batch input session but the deflaut values i.e.. doument type is assigned DA but now the client want to change the document type from DA to DG. How to change the document type in batch input session name RFDZIS00
Advance thanks
Dinesh

try to change table t033e ANWND = 5 with tcode se11
A.

How to run the Batch input session(SM35) in background thru Report program

Hi Experts,
I am working in one modification report requirement ,the report is Mass upload will update and run the file via batch input session. The client requirement is to implement the report execution in background mode , the batch input session will process automatically (ie. the job runs the batch input session in background and process the session ends).
Currently, the report calls SM35 to write a batch input session and the user manually selects the session and record the transactions.
Once the Transaction enters and the selection-screen inputs are given, then the transaction executed in background mode and all the above batch input process to be implemented.
Please advise and guide me, how to proceed.
I need your guidance to proceed via Call transaction using bdcdata statement, if it can be achieved the requirement.
Thanks & Regards
San.

Hi Arabind Prasad,
Thanks for your inputs.
I know the process of the report Execution in background and job steps.
I want the inputs for how to upload thru Batch input session in background job and the session should also processed automatically
Currently the report logic declared like call transaction 'SM35' and skip first screen.Once the report (tcode) executed (not in background) It writes one session in SM35. The user should select the session and process the transaction manually.
The new requirement is, if the report (tcode) executes in background mode...what and how the batch input session should be declared and how it process automatically (like you said mode 'N').
Hope I am clear in my query.
Please advise.
Regards
San.
Edited by: San Learner on Mar 1, 2011 7:16 PM

Test run in Batch input session

Hi All,
I am Working on BDC Batch input session i am able to create the Session 'SM35' through my program.I have two radio two buttons in my program one is test and real.Is it possible to test run for the BDC(Batch input session).
Thanks,

Hi All,
After Running the Batch Input Session in SM35.Is it possible to get the order number which is created in the Batch Session.
Can any body please help me out.
Thanks,
Swapna.

LSMW- Batch Input session getting error

Hi All,
I created LSMW object for Tcode KO01 and its creating the Internal order as expceted.But even after creating the document the Batch Input session status is showing incorrect.No messages are also displayed in the log.
Please let me know why this is happening.
Thanks in Advance,
Savitha

Hi,
Detail Error Message is as follows:
No batch input data for screen SAPLIMR0 1110
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.
Regards,
ababfk

Problem in running batch input session

Similar Messages

Maybe you are looking for