Problem in RWB of PI 7.1

Hello All,
I have installed PI 7.1 on Solaris with Oracle DB...Installation went fine but i am unable to see the Adapters whicg are installed..i have imported the .TPZ file also..
When i got to Runtime Work Bench and click --> DOMAIN <SID>
--> Integration Server --> in thiese ther are four components in whcih Integration engine <SDID> and Business Process Engine <SID> are in YELLOW, Mapping Runtime <SID> and Adapter Engine <PID> are in Green...
Any reason for those yellow marks>???
when i click on Adapter Engine <SID> and in that except "Repeat Ping" and Repeat Self-Test everything (Security Archiving, Background Processing, Communication Channel Monitoring, JPR Monitoring, Engine Status and Message Prioratization) is showing me an Error:
"Error in compiling [/mdt/channelmonitorservlet] in application [sap.com/com.sap.xi.mdt2]" .. the application is the same for all the errors...i have followed correct post installation steps and have also checked NOTE on RUNTIME WORKBENCH but still i am facing the problem...
AS i am unable to see anything in Adapter Engine <SID>, how can i confirm what adapters are installed??
Could you please suggest what to do???
Thanks,
Subbu

Any reason for those yellow marks>???
Click on the Component and you will get a log below showing why the status is a yellow triangle (component Status Containes Warning).....please note it is a warning and not an error.....even as of now my IE is showing a Yellow Triangle
AS i am unable to see anything in Adapter Engine <SID>, how can i confirm what adapters are installed??
Check page-191 and 192 of this document:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000702797&_OBJECT=011000358700000063822008E
S-userid and password needed!
Regards,
Abhishek.

Similar Messages

Activation Problem in RWB(Adapter Engine)

Hi All,
Very Good Morning...
I have one strange situation happed in Integration Directory(communication Channel), When i activated the communication channel in Integration Directory.
But in RWB it doesn't show activate status, It is Inactivate status...
Not only this communication channel, Every communication channel is like this.
What can i do now.Kindly give me some suggestions
Thank you very much.
Sateesh

Hi Srinivas,
Thanks for your response.
My channel is active status. Upto last night it successfully working.Today morning i faced this issue...
Not only this adatper if i changed the any other adapter to active to Inactive status . But still Adpter Engine---Communication channel is showing Active status only.
it not changed in adapter level. Earlier also we faced the issue,at that time we restart the our Java stack after that the problem was resolved.
Now also i am facing the same issue.What is problem behind? Why it not working some times?
Can you please suggest me on the same.
Thank you
Sateesh

Problems in RWB XI 3.0

Hi
We are on XI 3.0 ( SP 13) and I am facing a peculiar problem in our XI - QA RWB. When I try to check on the status of adapters - component monitoring - the screens that come up are extremely slow and almost do not come up in most occassions - when I click on 'Adapter monitoring' pushbutton - I see a popup window and nothing appears after that. Similarly, when I want to check messages in the AE, the response is extremely slow.
I have Java webstart 1.4.2_08 and my basis collegue has 1.4.2_09 - whenever he accesses the same XI QA RWB from his desktop - he does not have any problems accessing the above mentioned screens.
Also, my XI DEV RWB AF related screens show up ok when accessed from my desktop.
This is a very puzzling issue and any pointers are welcome.

Hi Karthik,
Why dont u try checkin on the jar files in ur webstart?It can be accessed thru File> preferences> advanced--> and the path in ur applications folder gives ur cache files and ur jars.
Check for corrupted jars,if any(they are indicated by icons different from ur normal jars), and delete them and try again.
cheers,
Prashanth

Alert Configuration problem in RWB

Hi all,
I am trying to create alert category in RWB to handle application errors via e-mail.
In RWB if i click on the button alert ategory ,it is displaying the screen that asks basic authentication.If i click on the Basic Authentication screen ,it is directly going to SAP GUT.It is not going to transaction alrtcatdef.
Could anybody help me to solve this problem?
Thanks,
sekhar.

Hi Sekhar,
You can directly logon to XI SAP GUI and create alert category using t-code alrtcatdef.
use RWB, to creare alert rules and to view alert inbox.
Thanks,
Sasi

CC problem in RWB Component monitoring

Hi people
i am getting this error in RWB component monitoring
1 communication channels have an error status0 communication channels inactive0 communication channels not providing any status information0 adapters logging communication-channel-independent processing errors
But sender&receiver CC are STATE is ACTIVE status
Adapter Engine Server is RED mark
All object's r correct
PLS send me to ASAP
Thanks & Regards
shekar

Hi There,
It saying that one of you CC in error and remaing things are ok.
As you saying everything ok..then check the short log of the error CC ..that text give you an idea..
the error may be occured some time back but it is still showing erro ..but everything works fine...
Regards
Rao

PMI Problem (End-to-End Monitor does not show data)

(End-to-End Monitor does not show data)
As I know that XML Messages Alerts T-code: SXMB_NOMI shows all alerts including errors as well I put date Range: 01-01-2008 to 01-08-2008 and filters for "Errors" system does show more then 300 errors
But problem in RWB - End-to-End Monitoring, when I click on display and date range 01-01-2008 to 01-08-2008 its give me graphical overview in right of window
and shows summary:
Errors: 0 Average
Open 904 Maximum
Successfully Completed 0 Minimum
Overall: 904
I thing End-to-End Monitor doesn't get data from PMI...
why does't show any errors, which is shows in SXMB_MONI
Please tell me how to resolve that problem
Thanks in Advanced
Edited by: issue2008 issue on Aug 26, 2008 12:02 PM

Hi,
A destination pointing to the Integration Server is created on the J2EE engine to collect the data for the end-to-end monitoring. If this destination is incorrect or if there are several clients in the system of the integration server, the data may be sent to the incorrect client.
This might be a reason so you can implement the correction of the destination in a manual way as follows:
Open the J2EE visual administrator.
Select the Destination service.
Select the HTTP "pmistore" destination.
Enter the URL for the ICF service spi_gate of the Integration Server in the following form "http://<host>:<port>/sap/bc/spi_gate?sap-client=<xxx>", where 'host' denotes the host of the integration server, 'port' denotes the HTTP port, and xxx is the client of the Integration Server.
Thanks,
Hemant

"Non-Central Adapter Engines" in RWB

Hi.
We install XI system and we changed host name according to notes 757692.
After then, We found one problem in RWB.
When we run Component Monitor in RWB, Adapter engine is in "Non-Central Adapter Engines".
Why Adapter engine is in "Non-Central Adapter Engines" node ?
Any ideas ?
Regards, Arnold.

Hello Sonali
This is most likely caused by errors registering the XI components in the SLD. Apply the notes below:
#764176 Error in XI due to inconsistent SLD contents
#1117249 Incomplete Registration of PI components in SLD
#1334053 No automatic PI 7.10 SLD Registration
Also search the forum for similar issues registering the adapter engine in the SLD components.
Regards
Mark

Time setting is differnt in sxmb_moni and RWB

Hi
Users are getting different time in sxmb_moni and RWB for the same xml
message.
Problem seem to be in JAVA side. There is no problem in ABAP side.
Right now, time is 13.47 but Adapter Engine in RWB shows the 12.47.
When i checked the status of xml message in sxmb_moni and RBW, same
problem is there. sxmb_moni shows teh right time for xml message and in
RWB, time is one hour behind for the same message.
Pls help to resolve this problem.
Thanks
Amar

Hi
JRE upgrad eto 1.4.2_18 has resolved the timezone problem..but there is still one pending issue:
We had seen timezone problem in RWB and all other java application. After JRE upgrade Timezone issue has get solved in the RWB. Now users reported one hour time difference for processed xml messages in message monitoring . Users are not sure whether they have seen the same time difference problem for message monitoring before the JRE upgrade.
but all other java time for SLD, RWB , NWA tool shows the right time. I refreshed the cache but it has not fixed this problem.
Anu suggestion to fix it???
Thanks
Amar

RFC adapter not found in RWB

Hello,
I have a problem with RFC adapters (From ECC and from BW)
When I try to found the problem in RWB  communication channel monitoring (I choose RFC in adapter type section)
I'm not seeing these channels.
Any idea how I can found this channels?
Elad

Hi Elad,
I hope you were not able to see the communication channel in CC Monitoring.
First check whether the channel has been activated in the Integration Directory?
Thanks,
kumar.

Installation of PI 7.0

Hi All,
We have installed PI 7.0 and facing some problems in RWB
The error msg we get in RWB is
SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.03.sap1 - Integration Server unable to specify a JCo client - No component names available from Integration Server -
Also I am not able to import any SWCV from SLD. There are no pre defined SWCV in IR(SAP BASIS)...
It would be highly helpful if you can let us know where we have to look into???
Thanks & Regards,
Jai Shankar.

Jai,
Like pointed by prakash, just check if all post installation and Configuration setting have been done.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97">Configuration Guide - SAP XI 3.0.</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/09cb9ffb-0701-0010-4183-c2e8f405bf9a">Post-Installation Guide - SLD 6.40</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b">SAP XI 3.0 SR1 Installation Guide.pdf</a>
Regards,
Bhavesh

The launching time of integration builder is extremely longer

Dear XI experts
I will tell you our story.
When I execute Demo examples (Chapter 5.1.3 Executing and Testing XI 3.0 Demo Examples Configuration)
We got the error STRING_BAD_REF dump when starting BSP application, I found out the solution : SAP Note Number : 869197
We did upgrade to a 6.40 kernel patch level 48 as mentioned in the SAP note.
After that, whenever I launch (start) the integration builder, it takes for ages.
Between [login screen]
http://static.flickr.com/56/117541396_db88ce7101_o.jpg
And [integration builder launching screen]
http://static.flickr.com/35/117541397_4bc79529e8_o.jpg
Ironically the websites related to Java engine pop up as usual, such as SLD, Java start page and so on. Also after few minutes I can get the integration builder in front of my eyes. However, whenever I try to create objects or call some information from the server it also takes time.
Which part do I need to look at in details?
Thank you for your reading.
I will appreciate your any comment.
Regards,
David

I collect some posts related to my problem ( i think ).
Slow response time
Problems in RWB XI 3.0
XI Running Very Slow
XI Running Very Slow
Performance Tuning
Re: Performance Tuning
Problems after Update to SP13
Problems after Update to SP13
Server Performance Declines
Server Performance Declines
Performance Analysis with Single Message
http://help.sap.com/saphelp_erp2005/helpdata/en/42/e7bb8f7c9d3ee0e10000000a1553f6/content.htm
Problems in RWB XI 3.0
Mapping tool very slow after upgrade to SP15

Send .bmp or .jpg File over Mail Adapter

Hi All,
I need assistance on the scenario: .jpeg or .bmp File -> XI -> SapInbox
The contents of a file will be only the image and nothing else.

Hi All,
I have configured my Sender as File Adapter and Receiver Mail Adapter.
I have my source File (.jpg) on my PC.
I have the following problems in RWB when I check my Adapters :
File = Sender Adapter v2727 for Party '',Service
          MyServiceName': Configured at 2006-10-11
                                       09:40:39 GMT
         History:
           - 2006-10-11 10:16:50 GMT: Error: No suitable
           sender agreement found
Mail = I get Status Green MyServicName:MyCommunicationChannel running: started
I cannot create a Sender Agreement as my interface is only going to get the File and send it out to Mail.
What is it that I am missing.

File adapter problem - message in RWB HOLDING msg status

Problem in XI File adapter recver comm channel.Getting msg in RWB Adapter Engine HOLDING status.
1. No explaination in RWB Details tab, of why status Holding.
2. File does not get created, because of Holding status.
3. Cannot Resend or Cancel in RWB the message.
Sometimes the msg goes through and other times does not and is stuck.
File Adapter Parms set as:
Connection Mode: Per File Transfer
Transfer Mode: Text
File Adapter setting Max concurrency = 1 would that have anything to do with it?
File Construction Mode:Create
Put Name: Direct
Empty msg-handling: Write Empty File
Type: Text
Any ideas Why holding? and Where to see more details. 

Hey
exact same issue has been discussed today on SDN.anyways have a look at the following blog
/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
Thanx
Aamir

Problem acccessing alertinbox or alert-configuration in RWB

Hi forum,
I have a problem acccessing alertinbox or alert-configuration in RWB,
because, whenever i click the button "alertinbox" or "alert-configuration"
it gives an BSP error page:
Business Server Page (BSP) error
Calling the BSP page was terminated due to an error.
The following error text was processed in the system:
BSP Exception: the Application Name sap in URL /sap/bc/bsp/sap/alertinbox/index.htm?sap-client=400&sap-sessioncmd=open is invalid.
pls help,

Hi,
Once you restart your Java engine.
The way of doing this is go to transaction SMICM-->Administration>J2EE Instance (Local) -> Send Soft Shitdown--
> With Restart.
Reward with points if helpful
Regards
Sai Ganesh

RWB PMI Data Problem

Hi, Everyone
I having problem in XI 3.0 SP20 RWB end-to-end monitoring, data does't show at all
I checked pretty much all configuration about Trobleshooting end-to-end monitoring Notes: 885405, and 1138909
1. RSXMB_ACTIVATE_ICF_SERVICES all services activiated through run report
2. logon group PUBLIC
3. Authorizations: SAP_BC_BASIS_Monitoring and SAP_BC_BASIS_ADMIN
4. Start the PMI service in the Visual Administrator. com.sap.pmi.Agent
5. PMI Java agents not active http:///sap/bc/spi_gate
7. Jobs are running SPI_TRANSPORT, SPI_REORG_CS, SPI_REORG_PS
8. PMI_MONITORING parameter is set to 1
9. Monitoring Level to "Low" in RWB...
I didn't done that configuration: as blow
My question is that do we have to done that configration and create RFC connection ?
Collecting PMI Data
===============
To display data collected by PMI in the Runtime Workbench, you require the following:
1. A user on the Integration Server to log on to the monitoring server. User with the following authorizations:
Object: S_RFC
ACTVT     : 16
RFC_NAME: SXMS_PMI_DATA, SYST
RFC_TYPE: FUGR
2. An RFC destination to enable you to transfer runtime data from the monitoring server to the Integration Server.
Name: AI_MONITORING_SERVER
Connection Type: 3 (connection to R/3 system)
Under Technical Settings, specify the following values:
Target machine: Name or IP address of the server on which PMI is installed
System number: Number of the system on which PMI is installed
Under Logon/Security, specify the following values:
Client: Client in which PMI is configured
User/password: User name and password of the user set up earlier
3. Two jobs that extract runtime data periodically from the monitoring server and transfer it to the Integration Server:
     This RFC destination is optional. You only need to create it if you want to display performance data collected in PMI in the Runtime Workbench.
Job name: SAP_XMB_EXTRACT_PMI_DATA
Job class: C
Under Start condition ® Date/Time, specify the following period:
Period: 15 minutes
Choose Step ® ABAP Program and specify the following:
Step: SXMS_PMI_EXTRACT_PMI_DATA
4. This job transfers the runtime data that has been extracted on the monitoring server to the Integration Server and can display the data in the performance monitoring of the Runtime Workbench.
Job name: SAP_XMB_GET_PMI_DATA
Job class: C
Choose Start condition ® Date/Time, and specify the following period:
Period: 15 minutes
Choose Step ® ABAP Program and specify the following:
Step: SXMS_PF_GET_PMIDATA
Please Advised
thanks

Dear Yoganand ,
    this question is out of curiosity . in our company we are using ECC 6.0 with ABAP engine alone . when i came across this thread i the "Runtime Workbench" was a very new word and hence i tried ti run the transaction SXI_CACHE given in the thread to knew what is that .
i got a "XI runtime cache " screen with status of cache showing in RED .
my doubt is that how is that XI feaurures are available with ABAP alone systems ?
will this cache be active(green) if there would have been JAVA engine also ?
please throw some idea on this , which would be of great use to us

Problem in RWB of PI 7.1

Similar Messages

Maybe you are looking for