Problem in sap business connector installation
Hi,
I have gone through installation guide ,but in it nothing was mentioned about c:\sapbc47\server\bin\runserver.bat file.Please help me to solve this problem.
7.5 Various problems on a 64bit architecture
At the time of writing (August 2002) no 64bit version of the Java Virtual Machine is yet available
for the following 64bit operating systems: AIX, HP-UX, Solaris. Therefore on these platforms the
32bit version of the JVM has to be used. This leads to the problem, that the 64bit version of the
native library libjmon.a (AIX), libjmon.sl (HP-UX) or libjmon.so (Solaris) cannot be loaded into the
process started by the JVM. (When starting monitoring, you'll see one of the following error
messages:
AIX: java.lang.UnsatisfiedLinkError
<sapbc>/packages/SAPMonitoring/code/libs/libjmon.a load ENOEXEC
on shared library(s)
<sapbc>/packages/SAPMonitoring/code/libs/libjmon.a
HP-UX: java.lang.UnsatisfiedLinkError:
<sapbc>/packages/SAPMonitoring/code/libs/libjmon.sl: specified
file is not a shared library, or a format error was detected
Solaris: java.lang.UnsatisfiedLinkError:
<sapbc>/packages/SAPMonitoring/code/libs/libjmon.so: ld.so.1:
/usr/j2se/bin/../bin/sparc/native_threads/java: fatal:
<sapbc>/packages/SAPMonitoring/code/libs/libjmon.so: wrong ELF
class: ELFCLASS64
This error should disappear, once you install a 64bit Java Virtual Machine. But until 64bit JVMs will
be available, the following workaround can be used:
From the Business Connector download page also download the zip file with the 32bit libraries for
your operating platform. From that extract the two files sapccmsr and libjmon.a/sl/so and copy them
to the directory <sapbc>/packages/SAPMonitoring/code/libs. (The sapccmsr also
interacts with the libjmon library and therefore must also be a 32bit version. The saposcol only
interacts with the operating system and therefore still has to be used in its 64bit version.)
After a restart to unload the old 64bit versions from the system, the error should be fixed.
Best Regards,
Mike
Similar Messages
-
SAP Business Connector Developer 48 Installation error
Hi Experts,
I have a problem when trying to install SAP Business Connector Developer 48.
When I tried to start the Executable, then it's giving a popup window saying that "Please select another location to extract the installer file to:"
I have tried to install by choosing another Location but it's giving same error
Please suggest necessary steps to solve this error.Hi Juan,
Thanks for quick response.
I have tried to install by giving almost all locations but still giving same error.
We are using Windows 2003 64 bit OS and Oracle 10g DB. -
SAP Business Connector certificate problem
We are trying trying to send data from SAP to bank via SAP business connector using bank URL. We have configured the certificates in SAP BC which are authenticated by bank on the basis of private key generated from our server. Now when we trying to post data to bank it is giving below error.
java.lang.RuntimeException: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by TrustDecider
Any idea? Please give me some suggestions to resole this problem.
Thanks and RegardsNormally I do not like to give documentation references, but in this case I think it makes sense. Certificate handling is an ugly and complicated topic, so many things can go wrong. Please check the SAP BC 4.7 Administration Guide, page 103 onwards ("Securing communications with the server"). It explains very well what needs to be done. Make sure you configured everything correctly.
CSY -
Problems with invoke call in browser (SAP Business Connector)
Hallo,
I have a problem with the invoke call in a browser to test a build flow in the SAP Business Connector:
I build a flow which receives a XML file, converts it into a record, then adds some mandatory data to the segment "EDI_DC40", then reconverts it into XML. After that, the XML gets converted into SAP IDOC format. Then I send it via ALE service to the connected SAP System.
The flow works so far if I test it with the "send XML file" function in "Test" menu. But when I test it via a call in the browser, it doesn´t work. The mandatory data in "EDI_DC40" is there, but the Business connector does not recognize the data which comes with the XML for this segment ("MESTYP" and "SNDPRN") - so it can not be transfered to the SAP system. It causes a routing rule error, because sender and message type is unknown.
Does anybody has experiences with that? Is there a difference between browser call and the test function "send xml file"?
Thanks in advance for your help!
KaiHi,
Just debug your SAP BC service in which you are calling the RFC and check if proper values are getting mappend to your input variables of RFC.
If that is correct than there wont be much chances of problem in BC.
\[removed by moderator\]
Regards,
Siddhesh S.Tawate
Edited by: Jan Stallkamp on Jul 1, 2008 4:32 PM -
Problem processing IDOC on SAP business connector
Dear all,
Using the SAP Business Connector I try to convert and IDOC which is in plain text to a record representing this IDOC.
Note: The record is generated using a DTD and the plain text is 'inserted' to the service using a MAP statement.
Which flowservice can I use and how should it be used?
Currently I'm experimenting with the FlatToHierarchy service.
Your help is appreciated!
Best Regards, HaraldHi,
I wonder that no one replied until now!
You are on the right way: you must use the service pub.sap.idoc:transformFlatToHierarchy. Then you must create a record in the PipelineOut-Section, referring to your IDoc-Record (that you have created form the DTD), and then connect/map it to the Service-Out-Parameter boundNode of the transformFlatToHierarchy-service. The connection between boundNode in Service Out and boundNode Pipeline Out must be deleted and the last must be dropped (red arrow down).
That's all! You don't need no other Mapping-Step.
I hope that would help you!?
Pöease excuse my bad english: I'm not pratizing it very often and my native langugae is german.
Best regards, Dagmar -
SAP Business Connector on Windows XP
I've been trying to get the SAP Business Connector 4.7 to work on Windows XP professional but haven't been very successful. The business connector seems to install okay, but when I try to start the business connector through the server.bat file it generates the following errors:
(loglevel = 4)
Loading WmPartners package
00000E [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.EmailTransport:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.EmailTransport
00000F [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:saveMessage: [B2BSERV.0026.9106] No method saveMessage in class wm.PartnerMgr.xtn.admin
000010 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:view: [B2BSERV.0026.9106] No method view in class wm.PartnerMgr.xtn.admin
000011 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:saveRoutingRule: [B2BSERV.0026.9106] No method saveRoutingRule in class wm.PartnerMgr.gateway.admin
000012 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:convertWildCards: [B2BSERV.0026.9106] No method convertWildCards in class wm.PartnerMgr.gateway.admin
000013 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.B2B:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.B2B
000014 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:editStore: [B2BSERV.0026.9106] No method editStore in class wm.PartnerMgr.xtn.admin
000015 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.FTPTransport:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.FTPTransport
000016 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:invokeViewService: [B2BSERV.0026.9106] No method invokeViewService in class wm.PartnerMgr.xtn.admin
000017 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:viewMsgContent: [B2BSERV.0026.9106] No method viewMsgContent in class wm.PartnerMgr.xtn.admin
000018 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:updateTransports: [B2BSERV.0026.9106] No method updateTransports in class wm.PartnerMgr.gateway.admin
000019 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:invokeService: [B2BSERV.0026.9106] No method invokeService in class wm.PartnerMgr.gateway.admin
00001A [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:log: [B2BSERV.0026.9106] No method log in class wm.PartnerMgr.xtn.admin
00001B [B2BSERV.0028.0005] Loading SAP package
00001C [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.RFC:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.RFC
00001D [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.BAPI:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.BAPI
00001E [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.XML:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.XML
00001F [B2BSERV.0026.0002] Failure while loading service sap.bapi:encodeToFile: [B2BSERV.0026.9106] No method encodeToFile in class com.wm.pkg.sap.bapi.BusinessDocumentCoder
000020 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:bapi2rfc: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000021 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:rfc2bapi: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000022 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:bapi2ale: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000023 [B2BSERV.0026.0002] Failure while loading service sap.admin:listGatewayServices: [B2BSERV.0026.9106] No method listGatewayServices in class sap.admin
000024 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:ale2bapi: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000025 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.ALE:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.ALE
000026 [B2BSERV.0028.0005] Loading WmSamples package
000027 [B2BSERV.0028.0026] Warning: Deprecated service type (webtap) in service sample.webtap:logApp in package WmSamples
000028 [B2BSERV.0028.0005] Loading WmDB package
These errors don't stop the business connector from starting up, but the errors are not normal behaviour. When I try to start the business connector through a Windows service then I get the message "Could not start the SAP Business Connector Service on Local Computer. Error 126: The specified module could not be found".
I have a working business connector installation on a Windows 2000 server, and when I checked the error log of that installation I noticed that it had logged the same errors about the 'WmPartners' package. It on the other hand didn't have any problems loading the 'SAP' package.
I tried installing the business connector on two different systems with identical results. Has anybody been able to get the business connector to work on Windows XP?HI,
I have no idea clearly about BC.. but ..
See the following links.. may be helpfull..
Business connector
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8609b90-0201-0010-c6bc-a41b611c6dac
SAP Business Connector on Windows XP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92e5bd90-0201-0010-b799-dfdc27f3100a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
If usefull .. points rewarded..
Regards
Chilla.. -
RFC function callls a SAP Business Connector Flow - only upper case
Hi everybody,
I wrote a function in SE37 which is calling a Flow in SAP Business Connector.
R/3 and SAP BC, both are Non Unicode systems.
The export parameter is TYPE makt-maktx.
The call to SAP BC works fine. Only all the text I can see in the pipeline of SAP BC is upper case.
I checked wether the domain of the makt-maktx allows case sensitive texts.
This is OK.
I have no idea how I can tell SAP BC to receive case sensitive texts.
I checked the forums. Seems nobody had such a problem.
Can somebyody help?
Best regards
Jochen
Hi to all,
it was not the JAVA Version, or a bug or whatelse.
I just ingnored while testing in SE37 that there is
a Flag [X] case sensitive - That's all!
Shame on me!
Greetings Joe
Message was edited by:
Jochen SeeligerHi Priya
Seeing the messages, it appears that server is down.
"java.net.ConnectException" occurs whenever you try to connect to a system which is not up and running.
cheers
Sameer
PS: Please award points if you find the answer useful -
Old version of SAP Business Connector (4.6)
Hi,
where can I download old versions of SAP Business Connector?
in BC section ([http://service.sap.com/sbc-download|http://service.sap.com/sbc-download]) there are only 4.7 and 4.8 installation package and upload.
thanks
DamianoWhat is the reason for staying on 4.6 ?
Did you develop many complicated packages and are afraid they wont work anymore in 4.7. That should not be the case.
By the way, if someone answers your question, you are encouraged to give the points to that person and not just mark the question as answered but I will answer your questions about BC anyway, if needed.
CSY -
To run a java service in SAP business connector.
Hi,
I have created one java service in SAP business connector.When i run it, i get the error as " Service 'rfctest:validatedata' is not operational. To run this service, first recompile the Java source."
I have set the "path" variable,still i am getting the same error.
What should i do to solve this problem?Hello,
when you call a BAPI from an external system via Business Connector, you will send a bXML document to BC (for example via HTTP). Refer to the SapbcSAPAdapterGuide for how to do that in detail, its good explained (see 4-25 and 7-3) there.
The explanation about sender/receiver is not correct. sender and receiver are the logical system names of the SAP backend system and the external system (check in transaction SALE of the SAP system).
Just send such document to BC, it will create the routing rule automatically. Then complete the routing rule (see 7-2) and activate it.
CSY -
SAP Business connector sending XML data
Dear all,
I am using an RFC to transfer the data from SAP R/3 to web server. I have to send the data to web server URl via SAP Business Connector in the below format.
I am getting data in RFC sttructure, Now I need to change the above data into XMl and hence need to compress.
The requirement is as below:
The XML message is signed, encoded in base64.
Signed and encoded XML message is compressed in GZIP format.
Can u please share your ideas to achieve this.
Thanks and regards,Dear Michal and Prateek,
Thank you very much for your ideas.
This is my flow:
clear XML data -> SIgning with detached signature -> Base 64 encode -> send the data via HTTP port.
I am signing the message using pub.security.pkcs7:sign.
But here problem is I am not able to get the detached signature.
If I select the option Detached signature it is giving only signature.
How can I manage the Detached signature and Message at HTTP port.
Please help me.
Thanks and regards, -
NULL Value in SAP Business Connector (BC47_CoreFix7 )
Dear All,
I am working with SAP Business Connector and some times i get NULL value in (PROXY SERVER) in Secure Proxy (HTTPS) so i need usualy to remove it manully and save the changes.
Would you plesae help me to solve this issue either to delete automatically or to have any idea to prevent getting this NULL value.
Thanks in advance..
Message was edited by: Hassan HakeemDear,
i need the answer ASAP pleasssssssssssse.
Thanks..
Message was edited by: Hassan Hakeem -
SAP Crystal Reports data source connection problem using sap business one
Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis. -
Flat File Transfer from SAP R/3 4.7 to SAP Business Connector 4.8
Hi Experts,
I have a requirement of transferring a flat file from my R/3 SAP 4.7 Box Application Server to the Business Connector 4.8 Box. I am new to SAP Business Connector and I am not to sure whether FTP works if I use a shell script in SAP R/3. Also, is there any way Business Connector Box can pull the file from R/3 Application Server and store the file in the Business Connector Server.
Any help will be appreciated!!!
Regards,
SubhhrangsuHi,
There are many ways thru which you can pass document to SAP BC:
You can HTTP, FTP, Email document to SAP BC.
SAP BC has predefined services for all of them.
For FTP document to SAP BC:
1 Initiate an FTP session on SAP BC Serveru2019s FTP listening port ( this can be found out from SAP BC administrator or from SAP BC homepage).
2 Point to the directory that contains the service to which you want to pass the XML
document.
Example cd \ns\Purchasing\SubmitOrder
3 Copy the XML document to this directory using the following command:
put XMLDoc.xml
Where XMLDoc.xml is the name of the file that you want to pass to SAP BC Server.
Example put PurchaseOrder.xml
Above code can be written in a batch file and you can schedule it to run at interval of minutes.
You can write java client program as well to upload file and map it to String variable of Flow service of SAP BC.
As Micheal said, you can look at sapbc/Developer/doc folder to look for more options.
Best Regards,
Divyesh -
JCO Timeout for SAP Business Connector 4.7
Environment :
Windows 2000, SAP Business Connector (BC) 4.7
General Description :
SAP BC is used to invoke BAPI's in the SAP R/3 system.
Issue :
Some BAPI's are taking some time to return response depending on user load. Need to provide a timeout for RFC calls invoked by SAP BC using JCO.
Following is the entry in the rfc trace log file when BC starts up ...
000000 -
2005-05-12 11:07:20 EDT
000001 [B2B-SAP.0011.0001] [JNI-LAYER] RFC.nativeSetTraceLevel() with rc = RFC_OK leave, [SUCCESS]
000002 [B2B-SAP.0002.0022] Log level set to 10
000003 [B2B-SAP.0002.0025] Registered SAP package trace with core trace
000004 [B2B-SAP.0002.0014] Starting SAP services
000005 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.setProperty(jco.jdsr.comp_name, SAP BC server0023 5555)
000006 [B2B-SAP.0003.0001] Loading native libraries
000007 [B2B-SAP.0003.0002] JCO version: 2.1.4 (2004-10-20) sapjcorfc 2.1.4 (2004-10-20)
000008 [B2B-SAP.0003.0004] jRFCLibrary info: 2.1.4 (2004-10-20)(C:\sapbc47\Server\packages\SAP\code\libs\sapjcorfc.dll)
000009 [B2B-SAP.0003.0003] RfcLibrary version:
This RFC library belongs to the SAP R/3 Release *** 640,0,41 *** MT-SL
Versions of SAP internal libraries:
dptr: 2
ni : 37
cpic: 3
rfc : 3
00000A [B2B-SAP.0011.0001] MiddlewareRFC.setProperty(jco.middleware.wait_for_request_time, 1)
00000B [B2B-SAP.0002.0016] Loaded SAP server configurations
00000C [B2B-SAP.0002.0015] SAP services started
00000D [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.setAbapDebug(false), current state false
00000E [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.setTrace(true), current state false
00000F [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.setAbapDebug(false), current state false
000010 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Pool.setMaxWaitTime(30000)
000011 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Pool.setConnectionTimeout(600000)
000012 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Pool.setTimeoutCheckPeriod(30000) on pool SERVER-300&USER_RFC&300&EN
000013 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.PoolManager.addPool:
name = SERVER-300&USER_RFC&300&EN,
connection = USER_RFC|300|EN|AS=[11.12.7.296|00|]G0|,
pool_size = 10,
max_wait_time = 30000,
pooled_connection_timeout = 600000,
timeout_check_period = 30000
000014 [B2B-SAP.0005.0003] Pool changed: SERVER-300&USER_RFC&300&EN containing 0 connection(s)
007E72 [B2B-SAP.0006.0001] Executing invoke for ZBAPI_TEST_Service on SERVER-300
007E73 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.execute (ZBAPI_TEST_Service) on handle [2]
Questions :
1) Is there a SAP BC configuration parameter for RFC execution timeout ??
2) Any other way of enforcing the RFC time out ??
3) If there is a way to set timeout on JCO.Client.execute method ??
I really appreciate your help !!I have tried changes the connection timeout value but if doesnot affect the time RFC. Following is from SAP BC adapter guide ..
Delay (minutes) until an unused connection to a SAP
System is timed out (default: 5)
I think I need similar setting as that for RFC connection !! -
HTTP POST / SAP Business Connector 4.6
I'have written my message in forum XI which is better location for this subject.
Message was edited by: Vincent BLOHORNHi Ganimede,
I'm not sure if 4.6 is (should be) but 4.8 is definitely UC compatible.
Please follow these links:
[Connectors @ SAP overview page|http://service.sap.com/connectors]
[SAP Business Connector (SAP BC) Documentation|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000719330]
Regards,
Martin Fuchs
SAP AG
Maybe you are looking for
-
How do I get iTunes to keep "The and A and An" when sorting?
iTunes for Windows strips of "The" and "A" and "An" from the artist and album names when it is sorting. How do I get it to stop? I have 6,000 files that I've just imported and it is ordering them in completely the wrong way for me. It lists "The Beat
-
Font Bug in Flash...fonts reverting to system default
Maybe I am doing something stupid...you never know. I typically use a shared lib to embed, then link fonts. I have SEVERAL flash files that have suddenly started to do this. Fonts that ARE embedded and ARE linked to shared lib swf...suddenly stop wor
-
Hi, Please can someone tell me/explain if it is possible to use isvalid in a query to get data. The code that does not work is below, it will explain what I am trying to do. I know I can loop through the results to get the relevant data after the que
-
Oracle BI Presentation Services 11.1.1.7.0
Hi, I installed Oracle BI EE 11.1.1.7.0 onto Windows 2008 R2 server and I performed the configuration post-install (domain creation). Anyway I cannot find BI Presentation Services (nor in the BI instance home directory, nor in the EM console, nor in
-
Is the windows PC adobe photoshop CS6 serial number software compatible with MAC PC?
Help?