Problem in SAP BW Report iview
Hi All,
I have created a BW iview. When i am clicking on iview it is asking for user id and password again.
I have created BW system and have specified all the properties and have done the user mapping.
Is there any configuration which i need to do from BW side.
Please let me know if i am missing anything.This is very urgent.
Regards,
Vaishali
Hi All,
Thanks for all ur answers.
Durairaj: Web As connection is successful. but i am not logging in to the portal using FQDN.
Guru: both the application servers are different. I trying to use SAP logon tickets for SSO. Hope that will work.
Vinod: I tried using Com.sap...appintegrator.sap and it is working. But in the web application query string after giving full url only it is not asking for user authentication again.Do we need to give the full url in the web application query string???
Regards,
Vaishali
Similar Messages
-
Hi,
Im trying to create a SAP BW Report iView with a BEx URL, but Im getting an error:
<i>Session Management will not work! Please check the DSM log file for details.</i>
When I use the wizard (for SAP BW Report iView), it asks me to fill out the web application string. Here I pasted in the URL. I left the application parameters blank.
The BEx URL:
http://<hostname>/sap/bw/BEx?sap-language=DA&bsplanguage=DA&CMD=LDOC&TEMPLATE_ID=WEB_TRAFIK_STARTSIDE
The BW call works fine in the browser and with a URL iView!?
EP 6.0 / WAS 6.40 / BW 3.5
Thanks
Joachimyou should be using BW Report iView.
and when you create BW Report iView pass the following for the querystring parameter
CMD=LDOC&TEMPLATE_ID=WEB_TRAFIK_STARTSIDE
for this to work, in the system definition WAS host , was path and was protocol should be maintained
Regards
Raja -
Difference: SAP BW Report iview - Query iView - URL iView
Hi,
I want to show BW reports on the portal. Can anybody suggest me the different ways of doing it ? And also let me know about checklist of steps that need to be performed.
Can anybody tell me the difference between showing BW reports through URL iviews, showing reports through Query iView and showing reports through SAP BW Report iView ?
Which one can i use for showing BW reports taking into consideration the implementation of SSO between the two? I tried the URL iView (using the Web URL of reports generated by BW) but it asks for Username/password. Is that the problem with SSO. How can i check if SSO parameters have been set or not. I have imported the verify.der to BW System and added that to ACL. Is there anything else which is required?
Thanks in advance.
Rgds,
MAHi Manoj,
I feel BW report iview will solve your problem. You can create a query sting in BW query designer and give the same in BW query string text area while creating BW report iview.
In the case of an url iview you are just giving a URL link of the BW report (this will ask for username/password).
But, in the case of a BW report iview you can view the required query as an iview (user mapping can be successfully done in this case) You should give fully qualified domain name in Was server option while creating the system.
While using the logon ticket Login id of both the system (ie BW and Portal) should be the same.
Refer the link for SSO using logon ticket)
User Mapping-based Single Sign On
Regards,
Vinod -
Unable to change language for SAP BW Report Iview
Dear all
We are currently rolling out BW Web Templates can be displayed in both EN and MS languages. The language can be changed via the URL that we display, e.g.
For English Language:
http://<hostname>:<port>/sap/bw/BEx?SAP-LANGUAGE=EN&cmd=ldoc&template_id=ZTEST
For Malay Language :
http://<hostname>:<port>/sap/bw/BEx?SAP-LANGUAGE=7&cmd=ldoc&template_id=ZTEST
We have published these templates into Ent. Portal 6 using SAP BW Report Iview, but unfortunately we cannot view the report in the Malay language (SAP-LANGUAGE=7), even though we have inserted the command SAP-LANGUAGE=7 in the SAP BW Report Iview query string. All the reports, although defaulted to SAP-LANGUAGE=7 displays in English. We also tried to set the language settings for the Iview, but there are no language 7 or MS in the Iview. It can only be defaulted to the Portals language, which is English.
Note that the reports can be viewed in the different languages if we using the URL separately outside of Portal, and also within BW Bex Analyzer itself. Only the Portal doesnt allow us to view the reports in MS language.
Can someone help us on this matter? All helps really appreciated. Thanks a lot.Hi Chris,
That's a bit odd indeed. If I understand your question correctly, you do get the BW reports in the correct language (either English or Malay) using the url's in your post but not when using them within a standard BW report iView?
The language setting for the iView has, unfortunately, nothing to do with the language for the content itself but can you tell me what the requested URL is for both Reports?
The BW Report iView is based on the Application Integration Component that generates the URL based on the paramaters you provide in the BW report iView.The following template is being used: <iView[PORTAl_URL]>?System=<System[url_Encode]>&Report=<Report>&DynamicParameter=<DynamicParameter[url_Encode]>. I could be that the generation of the URL fails due to the 7 (don't know why, just a gut feeling because it's the only thing that's different between those urls). You could try to use create an iView based on the Application Integrator instead (some more control over the URL template) but first you need to check whether the URL generated by the iView is correct.
Cheers!
Frodo
P.S: Award points if you find this useful -
Issue with SAP BW Report Iview
Hi,
The issue stands with the context menu(right click menu)
I have created a BI Query and generated a BW Report with the Web Designer Wizard.
When I run the generated URL it is working fine, with the context menu also working perfectly.
However when I use that report in SAP BW Report Iview, the report gets opened perfectly but the context menu is taking me to a new page with those options.
As of now i do not know of any setting for context menu specially.
If anyone can help me or if anyone has encountered this error before, pl. let me know the solution.Atul -- i am running into simillar issue. Please let me know if you found a solution for this.
Hi all -
When i create a BW Report iView 7.x in EP 6.0, the second level context menu doesn't appear for the template. Please let me know if this can be fixed.
Thanks
PR -
Creating SAP BW Report iview in Portal to access BW System
Hello Everybody ,
Iam creating an iview for publishin BW Reports in Enterprise Portal with the iview name SAP BW Report iview ,it asks for <b>BEx Web Application Query String</b> and <b>Application Parameters</b> and we are stuck over that.Do we need to create some standard templates for it and then connect them to reports .What should we enter under these parameters.Kindly revert back.
When we launch the SAPBWWebAppDesigner for template designing,an error message is displayed as mentioned below.Kindly please check that and the reason for its display.Do we need to make certain configurations for the Webapplication server for BW ,if any one has a document /guide available for that,kindly please revert back.
Error:
"You are logged on to an application server that does not support HTTP.Some of the Web Application Designer functions are therefore not available.Do you want to logon to a different application server?"
We are also not able to connect to the Web Application Server of BW directly by putting the url of the WAS into our browser.Are any extra configurations needed for that on the BW side for WEBAS.
You can send me attachents on my Email id which is [email protected] back soon,
Thanks,
SomyaHello,
I was asking abt the following parameters to be entered in BW for Portal inorder to create RFC ,Rfc for BW in Portal is already created.
Program ID
PortalDirectory
RFCDestination URL Prefix for Portal
Prefix of RM for BWMetadata
Export Path
Export File Name
Path in Portal
Name in Portal Content
System Alias
Logon Ticket Client
Portal SID
Import Path
Import File Name -
How to add in a SAP BW report iview in SAP EP 7.0
Hi,
can anyone help me about the SAP BW report iview in EP 7.0,because there is only Bex Web Application iview.I can not find the type of SAP BW Report IviewHi,
Check out this links.
http://help.sap.com/saphelp_nw04/helpdata/en/f6/3d1640d4642402e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f6/3d1640d4642402e10000000a1550b0/frameset.htm
Thanks
Senthil
P.S: Reward Points for useful answers. -
VBA problem with SAP BPC report
Hello
I have an EVDRE() SAP BPC report where one of the member id selection is derived using a VBA script. The problem I'm having is when I click on expand and refresh icon, the member id changes to #Value and the expansion and refresh fails as #Value is not a member id.
I would really appreciate any help on understanding why on expansion my VBA selected member id is replaced with #Value and how I can fix this if that is possible.
Many thanks
HinaThank you for your help with this problem which is now resolved.
Just to clarify we are on SAP BPC version 5.1
How it was resolved....
We had to use BEFORE_EXPAND as advised and also fix the calculation reference and finally also use AFTER_REFRESH.
We used VBA code to remember the dropdown lists option
and
copy the calculated member id into the pagekey dimension cell.
The AFTER_REFRESH restored the dropdown list option selected.
Not sure if the code is helpful but this is what we used....
Dim intRegionChoice As Integer
Dim intSegmentChoice As Integer
Dim intCountryChoice As Integer
Function BEFORE_EXPAND(Argument As String)
'Range(MCC_NodeToUse).Formula = Range(MCC_NodeToUse)
'Sheets("MCC").Select
'Sheets("MCC").Calculate
intRegionChoice = Range("AnswerRegion").Value
intSegmentChoice = Range("AnswerSegment").Value
intCountryChoice = Range("AnswerCountry").Value
Range("PickUpUserSelection").Value = Range("MCC_NodeToUse").Value
End Function
Function AFTER_REFRESH(Argument As String)
'MsgBox "After something"
Range("AnswerRegion").Value = intRegionChoice
Range("AnswerSegment").Value = intSegmentChoice
Range("AnswerCountry").Value = intCountryChoice
End Function
Thank you for all your help.
Hina -
Problem With the BI reports iviews in EHP 1.0 for Maintenance
Hi All,
We are using EHP1.0. In the portal for BI report i have to make visible/Invisible the BI report iview According to user.
Is it possible to remove all the active queries except the ones relating to notifications from the maintenance Tasks Iview? Could you provide a step by step please?
In the Reports section and the Service Map section, there are many BI reports but the customer does not have BI.
1) How to hide these reports Iview by changing the launchpad ?
2) is it possible to do this globally so all users do not see these?
Kindly help me with your valuble suggestion or document related to that issue.
Prashant Krishen
Edited by: prashant krishen on Oct 27, 2010 9:01 AMWhy this behaviour. Why the "Classpath" entry should
not be the last line in the manifest file.
That is a question for the people at Sun. The behaviour is not specific to Class-Path. The last line of the Manifest is not read unless it ends with a newline. -
SAP Crystal Reports data source connection problem using sap business one
Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis. -
Help with BI Report iView integration!
Hello,
I have been provided with a BI 7.0 Report URL (http://<BI FQDN>:8000/sap/bw/BEx?cmd=ldoc&infocube=<SUPPLIED INFOCUBE>&query=<SUPPLIED QUERY>&sap-language=EN) that i need to integrate into Portal as an iView. I have created BI System in the Portal System Landscape by entering following Parameters:
Connector Properties:
Logical System Name: <BI LS Name>
SAP Client: 100
SAP System ID (SID): B01
SAP System Number: 00
System Type: SAP_BW
User Management Properties:
Logon Method: UIDPW
User Mapping Type: admin, user
Web Application Server (Web AS) Properties:
Web AS Description: BI Web AS
Web AS Host Name: <BI FQDN>:8000
Web AS Path: /sap/bw/Bex
Web AS Protocol: http
After this i gave an alias SAP_BW for this system and then did the User Mapping for this system with my user account. Now i from PCD i am creating a New iView of type "SAP BW Report iView" and entered following parameters:
Application Verison: 7.x
Application Parameter: SAP_BW
BEx Web Application Query String: infocube=<SUPPLIED INFOCUBE>&query=<SUPPLIED QUERY>
Then when i do a PREVIEW test i get following message:
Service cannot be reached
What has happened?
URL http://<BI FQDN>:8000/irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher call was terminated because the corresponding service is not available.
Note
The termination occurred in system B01 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:sapb01_B01_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
If i execute the same query from Query Designer then also i get a error screen with an invalid URL in the address bar and a message in the body saying "The Page Cannot be Displayed". The URL that is pointed from Query Designer is:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=<SUPPLIED QUERY>&VARIABLE_SCREEN=X&DUMMY=7
The same report gets perfectly executed from BI System. Can anyone please tell me why am i getting these error messages and how do i resolve? Please advice. Thanks.Hi Vasu ,
I think you have a problem is due to BI-JAVA . Please check the links in below.
BI Java
Displaying BW3.x Objects on Portal 6.0 SP9 after upgrade to NW2004s BI
what exactly is in "BI java" ?
Regards, -
I am having a strange issue when I try to preview a BW iView via the Portal:
The iView gets generated but the screen displays only the icons but not the data. I expect a variable screen to pop-up to enter the Calmonth but I don't get that.
Note that this is the first BW iView I am trying to generate on an EP6 SP14 system with BW 3.1 SP16.
The system landscape, Aliases, connection tests etc are
all successful and we are using weak encryption (ume.usermapping.unsecure=TRUE).
Please help me with this situation.
Thanks
SriniHi Linda,
The URL iView works fine for me. It is only the "SAP BW Report iView" that is not working correctly.
I tried both the below types of iViews:
1. BEx Web application: template_id=<TEMPLATE_ID>
2. BW query: infocube=<INFOCUBE>&query=<QUERY>
Can any one tell me where I am going wrong in maintaining the following String properties for above two types of iViews:
1. template_id=TEST_PORTAL_TEMPLATE_001
2. infocube=s900&query=TEST_PORTAL_QUERY_001
Thanks
Srini -
PROBLEM EXPLANATION
Pretend that the attached excel file is a crystal report file
Column A is the details to be compared. Column B is the details that i will have to use a formula in sap crystal report.
as you can see cell B3 is same with the value in cell A2, B4 with A3, B5 with A4, B6 with A5 and so on.
How can i get the previous data of column A and put it in column B using formula in crystal report? either basic or crystal syntax
My Column
Colmun with formula
7000
0
7689
7000
9457
7689
8472
9457
2364
8472
12395
2364
18273
12395
84723
18273
57483
84723
493837
57483
2823747234
493837
226374
2823747234
7646363
226374
85826263
7646363
75756236324
85826263
1239534
75756236324
Message was edited by: Ludek UherHi,
Use the 'previous()' function.
Example:
Previous({Column A})
-Abhilash -
Problem while fetching more records in SAP ABAP report program
Hello Frinds,
I have SAP ABAP report program which fetches data from usr02 table
Now, program is working fine with less number of records, bot in production there are more than 200000 records and either report gets timed out or there is run time error like buffer area not available.
Below is the fetch statement
SELECT bname FROM usr02 INTO TABLE lt_user
So, do I need to take records in small chunks, I do not think it is needed as I have worked on number of othere databases where there are number of records in single fetch statement and database itself take care of this.
Please provide me some approach to resolve this problem.This will be very difficult for you.....
Since you are getting a time out error....it looks like, you are runnning this report in foreground....................
Try running it in background it will work...
ELSE....you have to fetch in small chunks....but the question is how will you do it. Since the USR02 only has BNAME as primary key...
Either put the BNAME as part of selection screen and fetch the data.....it will solve your problem....
Only fetch for those BNAME which is entered in the selection screen...
Hope it helps! -
Problem in developing a Portal Activity Report iView
I have developed a Portal Activity Report iView and assigned some iviews to the "Specify Report Content" option! I am supposed to get the user information but instead, I see the message "No content available for the specified period".
Am I missing anything?
Can someone help me out in this regard!!!Keep in mind that the Portal Activity Reporting functionality only collects user information from hits to <b>pages</b> that have the <b>Monitor Users</b> property set to true. You can monitor the number of hits to an iView, but cannot collect user information about those hits. If you need this kind of information for an iView, I would recommend adding the iView to a page and then collecting the activity reporting information you need from the <i>page</i> hits.
See <a href="http://help.sap.com/saphelp_nw04/helpdata/en/58/7e234239f75733e10000000a155106/frameset.htm">Configuring iViews/Pages for Data Collection</a> for more information.
Hope this helps,
Fallon
Maybe you are looking for
-
Recently upgraded Mac OS to 10.5.5 - have an older G4 which is max'd out upgrade-wise - both processor and OS. At present Safari is 3.1.2. Itunes is 9.2.1. Itunes will not allow me to connect to store - says it requires Safari 4.0.3 - however, when I
-
Hi Experts, I have an interface with IDOC to file and JDBC (two recievers) which works fine in DEV system. I have transported the same objects to QAS and activated the ID objects in QAS system. i am wondering that the interface works fine in DEV and
-
Higher precision of timestamp when wrinting to txt
Hello, I would like to have a higher precision (--->miliseconds) of the timestamp when saving waveforms to .txt. Labview only prints the date and the time in HH:MMS. As I am acquiring data with a rate of 1k, 1000 data values have the same time descri
-
Storage options and performance
We have a GroupWise 8.02 HP2 running on a NetWare 6.5 SP8. The hardware has a RAID 1 for its SYS: volume and a RAID 5 (4 disks) for its MAIL: volume. We've been running low on space.... As an immediate solution, we're considering plugging into, via i
-
NullPointerException in syncronized(){} block
I have some code that produces, once in a great while, a NullPointerException when exiting a synchronized block (the debugger says that the line generating the exception is the block closing brace). I am wondering if there is any legitimate way that