Problem in SAP extractor for CRM - BW extraction.

Hi Gurus,
I am facing a problem loading master data for 0CRM_MKTELM (CRM Marketing Elem.). It's a Repair full load without any selection.
Its failes by saying : Job terminated in Source system.
When we cheaked in source system i.e. CRM system , we found a short dump in ST22 for the same. Which mentioned TSV_TNEW_PAGE_ALLOC_FAILED.
We tried to load the infopackage by reducing its settings of Maximum size of a data packet in kByte & Maximum number of dialog processes for sending data. It worked for few days but today it failed again for the same reduced settings.
Please suggest.
Thanks in advance,
Sourabh Deo

Hi,
The issue with the memory allocation only... as you have tried the info-package with more selection that is the best approach... u can try putting more selection in the info-packages...
Also, see if basis can help to increase the memory parameters

Similar Messages

Standard extractor for crm

Hi everybody,
What are the usually used standard extractor for CRM especially TPM and Chanel Management. Can somebody give me a idea about this submodule (TPM, CM).

Chanel Management - 0CRM_CHM_CLASS_ATTR
TPM - 0CP_UPLI_PARA
More:
http://help.sap.com/saphelp_nw70/helpdata/en/4a/6321849a710a4fa4a2759101ed4932/content.htm
Regards,
DL

Extractor for CRM service plan and product service letter

Hello:
Is there an extractor for CRM service plan (object type = BUS2000245) and CRM product service letter (object type = BUS2000210)?
The delivered extractor 0CRM_SRV_PROCESS_H only extracts regular service order (object type = BUS2000116). The contract extractor (0CRM_SALES_CONTR_I) only extract contract (object type = BUS2000112).
Any suggestion? Thanks!
Jennifer

Hi Jenifer,
Can you please share me the solution you have implemented.
Thanks in advance
Regards,
Tilak

In case of problems with SAP GUI for Java ...

Hello all,
in case of having problems (errors, ABAP dumps etc.) with SAP GUI for Java, please create an OSS message on component BC-FES-JAV with information described in OSS note 326558
http://www.service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700010521522001.
This makes sure our official support channels get aware of your problem.
Thanks and best regards
Rolf-Martin

Hello Rolf-Martin,
i don't have access to this website to view the note.
The version of the Suse libc is:
GNU C Library stable release version 2.3.2, by Roland McGrath et al.
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 3.3 20030226 (prerelease) (SuSE Linux).
Compiled on a Linux 2.4.20 system on 2003-03-13.
Best Regards,
Piotr Brostovski

Problem with SAP GUI for HTML

Hi SDN
I am creating a SAP transaction iView with SAP GUI for HTML. I have give the Transaction code VA01 but when i execute the the iView it is displaying the SAP Easy Access screen in html. Can any one suggest me how to rectify this error and display the required transaction in html.
Thanks in advance.
Regards
Basha

Hi Basha,
Try this in the browser:
http://<host>:<port>/sap/bc/gui/sap/its/va01?sap-client=100(XXX)
1) It will ask for the username and password
2) Enter the credentials and it should directly take you to the VA01 transaction
If it fails again, try this:
http://<host>:<port>/sap/bc/gui/sap/its/vl31w?sap-client=100(XXX)
This should display the "Create Inbound Delivery NotificationTitle Create Inbound Delivery Notification " sreen."
If it faisl again, there is some problem with the way the ITS has set up. Check with your basis.
Thanks,
Sathya

Problem in Sap script for Check printing

Hi all,
I have problem in Check printing for FI Module. In Tcode f-58 i am taking the printout of checks. For my user they want to move the main window in upwards, but the sap script <b>F110_PRENUM_CHCK</b> not allowing to move upwards. how to do this, its urgent. plz
point wil be sure.
Gowri

Hi
Copy the script F110_prenum_chek to some ZCHECK and do the changes.
Why you can't change the MAIN window towards up?
You can changes ths ize of it by adjusting the setting of it .
generally we use some pre printed stationary for this in which all the line item data with doc numbers is printed on top and the check will be in bottom
and in check we just print the few fields in the right positions.
<b>Reward points for useful Answers</b>
Regards
Anji

Problem With SAP GUI for HTML iView

Hi All,
I have created a transaction iView(SAP GUI for HTML) for the T code SE12, when I view the iview, it get loaded for the first time and if I log out and when i again login to the portal and view the transaction iview it is not getting loaded. If I clear the cache(By pressing Ctrl+F5) the same iview get loaded.
Could any one help me in solving this problem
Regards
Sivaprasath

Hi Shiva,
For SAP transaction iViews better to use SAP GUi for Windows option instead of SAP GUI for HTML.
Hope it helps for you..
Cheers
Phani

SAP Fiori for CRM 7.0/CRM 7.02

Hi All,
We are planning to use SAP Fiori and Gateway as a Standalone Server and with CRM 7.0 and CRM 702 which is running since 3 years.
In the first box we will install Latest Netweaver with Addon of SAP Gateway, but we are confused with the Fiori part.
Question: Is Fiori supported by CRM 7.0 and CRM 7.0 EHP2?
2. Is there any backend component which has to be installed on CRM Server?
I have gone through the scn documents and still not clear.
Can anyone help me in clarifying my doubts?
Thanks,
Sharib

I recently installed Fiori for SAP ERP and from that I can confirm that Fiori contains two parts:
one backend part and one frontend part.
According to note1931218 - General Information: Fiori for CRM you need EHP3 for CRM 7.0 (SP-stack 04 to use latest SP (SP02) for Fiori).
You can also find some release information in the following note:
1959305 - Release Information Note: SAP Fiori transactional apps for SAP CRM 1.0
If you go to http://service.sap.com/swdc choose "Browse our Download Catalog", you can choose "SAP Fiori" and then "SAP Fiori for Suite" in the main area of the browser.
the backend part is the one called "FIORI CRM APPLICATIONS X2".
the frontend part is called "UI FOR SAP CRM ENHANCE PACKAGE".
That's about all I know about the Fiori for CRM and I'll hope you can continue from here.

Problem in sap script for Item data

Hi Guys ,
Although I am working in ABAP for last 1 year but I am new to SAP script , This is first time I am doing this -
I am creating excise invoice profarma and able to print all that data except J_1IEXCDTL ( Item data ) that I have to display in loop ,
I am using
LOOP AT ITAB_J_1IEXCDTL.
CALL FUNCTION 'WRITE_FORM'
       EXPORTING
            ELEMENT = 'ITEM_VALUES'
            WINDOW = 'MAIN'
       EXCEPTIONS
            ELEMENT = 1
            WINDOW = 2.
ENDLOOP.
My problem is that this is working fine for 1 record but if there are more than 1 record in ITAB_J_1IEXCDTL. , it is showing only first record ,
Other thing i want to know what is connection of element between Driver program and sap script , Can we give any name to element and it doesnt make any impact on Sap script
i have done same in my program ,
Thanks in advance
Amit

my problem is solved now ,
Thanks

Material Replication problem from SAP ECC to CRM 2007

I am trying to load material data from SAP to CRM. Materials are in general coming across however i have a lot of errors visible in smw01 with the following entries:
@0A@     BDoc validation error     PRODUCT_MAT     mBDoc Validate     06/04/2010     14:20:05     QAS100     R3AI_MATERIAL     MW_RFC_USER     DF6FDBE147AC2EF1B467002264F6091A
On closer examination i can see that the specific issue relates to teh following:
A key was used twice for multirow set type CRMM_PR_TAX
    Message no. COM_PRODUCT512
I can see on closer examination of the individual entries why the issue is occuring when i show the Bdoc message extra data I can see that there are multiple entries for CRMM_PR_TAX
CLI PRODUCT_GUID                     TAX TAX TAX_ TAX_GROUP            TAX_TARIFF_CODE T C VALID_FROM          VALID_TO            UPNAME       H LOGSYS
400 00000000000000000000000000000000 IE      MWST NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
I also note that the PRODUCT_GUID is blank 00000000000000000000000000000000 whic shouldn't be the case.
It's just not clear to me what i need to do to resolve the issue
Any help would be greatly appreciated
Regards
Eddie

I am trying to load material data from SAP to CRM. Materials are in general coming across however i have a lot of errors visible in smw01 with the following entries:
@0A@     BDoc validation error     PRODUCT_MAT     mBDoc Validate     06/04/2010     14:20:05     QAS100     R3AI_MATERIAL     MW_RFC_USER     DF6FDBE147AC2EF1B467002264F6091A
On closer examination i can see that the specific issue relates to teh following:
A key was used twice for multirow set type CRMM_PR_TAX
    Message no. COM_PRODUCT512
I can see on closer examination of the individual entries why the issue is occuring when i show the Bdoc message extra data I can see that there are multiple entries for CRMM_PR_TAX
CLI PRODUCT_GUID                     TAX TAX TAX_ TAX_GROUP            TAX_TARIFF_CODE T C VALID_FROM          VALID_TO            UPNAME       H LOGSYS
400 00000000000000000000000000000000 IE      MWST NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
I also note that the PRODUCT_GUID is blank 00000000000000000000000000000000 whic shouldn't be the case.
It's just not clear to me what i need to do to resolve the issue
Any help would be greatly appreciated
Regards
Eddie

Sap help for CRM

Hi
Can anybody help me in navigating to online CRM help from help.sap.com site ??
Regards
kumr

Hi
u can know about the Documentation for SAP in http://help.sap.com/ in that go toSAP Business One
U can also know abt the Best Practices etc
if u want to go the help portal directly
check this
http://help.sap.com/saphelp_crm50/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Reward points if helpful
Cheers
Manohar

Problem with sap bw for hospital

dear all,
in need of your help experts, i am new in sap and have been assigned to create some reports for a hospital i work for,
i ve previously created infocubes and reports for another organisation regarding their purchasing so i ve used all the 0PUR infocubes and 2LIS sources etc,
basically what happens here in this case thus i need some information is:
i created an rfc connection between bw and sap R/3 systems and then tried to activate infocubes through BI content, i first activated the purchasing infocube to check everything was working, i did this 'in data flow before' therefore i ended up with all the relevant infosources, transfer rules etc
BUT then i was asked to retrieve all data from the IS-H module the hospital works with, so i read around and went to activate the 0HC infocubes again 'in data flow before' only this time the structure that was created for me includes an infocube (movement for example) the relevant ODS, transfer rules and infosources but that is as far as it goes ie no datasource or sourcesystem exists in the tree under them like it did with purchasing.
another thing is that when i go to rsa6 in my source system i see all the FI, MM etc modules but cant seem to locate IS-H anywhere
i appreciate your help i am really stuck here

Hello again,
Use the help.sap.com it gives you the most detailed info about the InfoCubes, Datasources, etrc. for that area:
[http://help.sap.com/saphelp_bw31/helpdata/en/3e/e7883c18be411ae10000000a114084/frameset.htm]
see the ones that suit you best.
If the cubes are already installed, you don't need to install them again, but even if you did, you don't need to delete them, they will overwrite them.
Hope this helps,
Regards,
Diogo.

Standard SAP program name for the data extraction

Please tell me the stadard SAP program for the data extraction for Material, Vendor and Customer.

you might want to explore tx. SXDA.

Regarding SAP GUI For HTML

Hi Everyone,
My Requirement is Endusers needs to access applications from portal using SAP GUI For HTML.
Because Some users in site or remote place they need Need to access applications.
The Problem With SAP GUI For Windows it requires SAP GUI S/W Every Workstation.
Before What i requires and what approach should i follow.
What i will do in Portal,ITS And WAS.
Please Do Needful.
Thanks
SubbaRao Chinta

Hi Sarkar,
I Follow Your Article.i created service under its in ecc and activate the service.
and login portal and created sap IAC iview.after i click on preview
i got the error below
The following error text was processed in the system ECC : System error
The error occurred on the application server epsap05_ECC_15 and in the work process 1 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSU
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system ECC in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server epsap05_ECC_15 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then yo
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
What Can i DO for enabling Apllications Through SAP GUI.
Thanks
SubbaRao

How can i implement sap note on crm

can anyone please tell me how to apply sap note for CRM?

HI Thomas,
1. Releases: A note can be modified in case more changes can be included. In that case, a new 'release' of the note will be created. In snote, you can also find the function 'downlaod the latest version'. This means snote will check the current release in OSS can download it.
2. Reference support pacakge: This is the support pcakge where the change in this OSS note is included. Any SP level equal or higher than that will make the note 'can not be implemented';
3. Correction Instructions: One note can have one or multiple correction instruction. Usualy they're for different releases (620, 640, 700 etc.). But sometimes the CIs are for the same release and they will be implemented into the system sequentially when the note is being implemented.
Normally, when you try to implement a note in SNOTE, go to the note browser, the note then has the 'implementation status'. ' can be implemented' means the note have the valid support pcakge level. 'cannot be implmented' means the note is already included the the support packages. "Not relevant' means the note changes a component which doesn't exist in the system.
Regards,
Satish Mathala

Problem in SAP extractor for CRM - BW extraction.

Similar Messages

Maybe you are looking for