Problem in sap-script, page count when trigger new page.
Hi to all,
Please help on my sap-script problem. When I trigger new-page the page count should continue.
Ex: I have total of 2 pages, the second page is trigger in new-page. the page count of 2nd page should show as Page 2 of 2. but it shows on me is still Page 1 of 2.
my command of new-page is in the zprogram. using function command_control
thanks to all,
I will reward points.
Booh.
Hi ,
use &PAGE& of &SAPSCRIPT-formpages&
IF Found Helpfull.
Do Reward.
Regards.
Eshwar
Similar Messages
-
Use a Custom Page Layout When Creating [[new pages]] in Enterprise Wiki
I have followed a few different blogs and I've been able to create a custom wiki content type and create a new page layout based off of that content type. I've also set my site so that my new layout is the default page layout. This works when creating
new pages on the site but when i try to create a new wiki page --> [[new page]], I'm still getting the typical blank wiki template. How on earth do i get my page layout to sync with creating a new wiki page?Hi,
For your issue, go to Site Actions > Site Settings > Page layouts and site templates (Under Look and Feel).
Pages in this site can only use the following layouts: add custom wiki template.
Select default page layout: choose custom wiki template.
Besides, here is a blog, you can use as a reference:
http://blog.henryong.com/2010/06/08/how-to-create-custom-sharepoint-2010-page-layouts-using-sharepoint-designer-2010/
Best Regards,
Lisa Chen -
Problem in Sap Script while printing
HI,
This report calling when I print billing document .this report getting data and call some sap script form but it prints 20 pages in place of only one page. Please
Guide me to finding the exact problem.the code is below..
REPORT zsd_excinv LINE-SIZE 110 LINE-COUNT 100 MESSAGE-ID vn.
TABLES: vbco3, "Keyfelder Vertriebsbeleg: Dokumentendruck
tvko, "Verkaufsorganisation
sadr, "Adressen
komk, "Communicationarea for conditions
komp, "Communicationarea for conditions
komvd, "Communicationarea for conditions
vbdkr, "Druck Rechnung: Kopfdaten
vbdpr, "Druck Rechnung: Positionsdaten
conf_out, "Configuration data
vbpla, "Druck Packliste : allgemeine Daten
vbplk, "Druck Packliste : Versandelementkopfdaten
vbplp, "Druck Packliste : Versandelementinhaltsdaten
vbpls. "Druck Packliste : Summendaten Verpackung
TABLES : j_1iexchdr, j_1iexcdtl, vbrk,eikp,j_1imocust,likp,
j_1iregset, itcpp,kna1, t001w.
*PARAMETER : p_grp LIKE j_1iexchdr-exgrp.
*SELECT-OPTIONS : so_num FOR j_1iexchdr-exnum.
*PARAMETERS : p_num LIKE j_1iexchdr-exnum.
DATA : wa_j_1iexchdr TYPE j_1iexchdr,
it_j_1iexchdr TYPE TABLE OF j_1iexchdr.
DATA : wa_j_1iexcdtl TYPE j_1iexcdtl,
it_j_1iexcdtl TYPE TABLE OF j_1iexcdtl.
DATA : wa_vbrk TYPE vbrk,
wa_vbrp TYPE vbrp,
wa_lips TYPE lips,
wa_j_1iregset TYPE j_1iregset,
wa_j_1iwrkcus TYPE j_1iwrkcus,
wa_j_cust TYPE j_1imocust,
it_vbrp TYPE TABLE OF vbrp.
DATA : BEGIN OF wa_header,
exnum TYPE j_1iexchdr-exnum ,
exdat TYPE j_1iexchdr-exdat ,
exccd TYPE j_1iregset-j_1iexccd,
excrg TYPE j_1iregset-j_1iexcrg,
excd1 TYPE j_1iregset-j_1iexcdi,
bstnk_vf TYPE vbrk-bstnk_vf,
zterm TYPE vbrk-zterm,
iever TYPE eikp-iever,
btgew TYPE likp-btgew,
chapid TYPE j_1iexcdtl-chapid,
traid TYPE likp-traid,
rdoc TYPE j_1iexchdr-rdoc,
maktx TYPE j_1iexcdtl-maktx,
meins TYPE likp-gewei,
END OF wa_header.
*DATA : BEGIN OF wa_header,
exnum TYPE j_1iexchdr-exnum ,
exdat TYPE j_1iexchdr-exdat ,
exccd TYPE j_1iregset-j_1iexccd,
excrg TYPE j_1iregset-j_1iexcrg,
excd1 TYPE j_1iregset-j_1iexcdi,
bstnk_vf TYPE vbrk-bstnk_vf,
zterm TYPE vbrk-zterm,
iever TYPE eikp-iever,
btgew TYPE likp-btgew,
ntgew TYPE likp-ntgew,
chapid TYPE j_1iexcdtl-chapid,
traid TYPE likp-traid,
rdoc TYPE j_1iexchdr-rdoc,
maktx TYPE j_1iexcdtl-maktx,
meins TYPE likp-gewei,
END OF wa_header.
*DATA : BEGIN OF wa_detail,
zeile TYPE j_1iexcdtl-zeile,
matnr TYPE j_1iexcdtl-matnr,
maktx TYPE j_1iexcdtl-maktx,
menge TYPE j_1iexcdtl-menge,
rate TYPE konv-kbetr,
amount TYPE konv-kwert,
fob TYPE konv-kwert,
meins TYPE j_1iexcdtl-meins,
*END OF wa_detail.
*DATA : BEGIN OF wa_duties,
zpr0 TYPE konv-kbetr,
jadc TYPE konv-kbetr,
st1 TYPE konv-kwert,
jexp TYPE konv-kbetr,
jecs TYPE konv-kbetr,
st2 TYPE konv-kwert,
jetc TYPE konv-kbetr,
st3 TYPE konv-kwert,
jsad TYPE konv-kbetr,
st4 TYPE konv-kwert,
st5 TYPE konv-kwert,
vat TYPE konv-kbetr,
st6 TYPE konv-kwert,
zint TYPE konv-kbetr,
jead TYPE konv-kbetr,
zect TYPE konv-kbetr,
zsad TYPE konv-kbetr,
vat_per TYPE konv-kbetr,
vat_val TYPE konv-kwert,
total TYPE konv-kwert,
remtime TYPE j_1iexchdr-remtime,
exdat TYPE j_1iexchdr-exdat,
*END OF wa_duties.
*DATA : wa_t618t TYPE t618t.
*DATA : in_words TYPE spell,
word TYPE spell-word,
decword TYPE spell-decword,
gv_plant_adrnr TYPE t001w-adrnr,
lv_iever TYPE eikp-iever,
lv_btgew TYPE likp-btgew,
lv_ntgew TYPE likp-ntgew,
lv_traid TYPE likp-traid,
lv_regid TYPE j_1iregset-j_1iregid,
gv_cust_adrnr TYPE kna1-adrnr,
gv_ecsduty TYPE konv-kbetr,
gv_tot_cen_amt TYPE konv-kwert,
gv_zterm TYPE tvzbt-vtext,
gv_tot_amt TYPE konv-kwert,
lv_ins TYPE konv-kbetr,
lv_fre TYPE konv-kbetr.
*CONSTANTS : c_ecs TYPE j_1iexcdtl-ecsrate VALUE '0.368'.
*SELECT-OPTIONS : so_num FOR j_1iexchdr-exnum.
DATA : BEGIN OF wa_detail,
zeile TYPE j_1iexcdtl-zeile,
matnr TYPE j_1iexcdtl-matnr,
maktx TYPE j_1iexcdtl-maktx,
menge TYPE j_1iexcdtl-menge,
rate TYPE konv-kbetr,
amount TYPE konv-kwert,
fob TYPE konv-kwert,
meins TYPE j_1iexcdtl-meins,
END OF wa_detail.
DATA : BEGIN OF wa_duties,
zpr0 TYPE konv-kwert,
jadc TYPE konv-kwert,
st1 TYPE konv-kwert,
jexp TYPE konv-kwert,
jecs TYPE konv-kwert,
st2 TYPE konv-kwert,
jetc TYPE konv-kwert,
st3 TYPE konv-kwert,
jsad TYPE konv-kwert,
st4 TYPE konv-kwert,
st5 TYPE konv-kwert,
vat TYPE konv-kwert,
st6 TYPE konv-kwert,
zint TYPE konv-kwert,
jead TYPE konv-kwert,
jeap TYPE konv-kwert,
jeap_per TYPE konv-kbetr,
zect TYPE konv-kwert,
zect_per TYPE konv-kbetr,
zecs TYPE konv-kwert,
zsad TYPE konv-kwert,
vat_per TYPE konv-kwert,
vat_val TYPE konv-kwert,
zlst_per TYPE konv-kwert,
zlst_val TYPE konv-kwert,
zcst_per TYPE konv-kwert,
zcst_val TYPE konv-kwert,
zeap TYPE konv-kwert,
zeap_per TYPE konv-kbetr,
total TYPE konv-kwert,
remtime TYPE j_1iexchdr-remtime,
exdat TYPE j_1iexchdr-exdat,
END OF wa_duties.
DATA : wa_t618t TYPE t618t.
DATA : temp TYPE konv-kwert VALUE 0,
cen_amt TYPE konv-kbetr VALUE 0.
DATA : in_words TYPE spell,
word TYPE spell-word,
decword TYPE spell-decword,
gv_plant_adrnr TYPE t001w-adrnr,
lv_iever TYPE eikp-iever,
lv_btgew TYPE likp-btgew,
lv_traid TYPE likp-traid,
lv_regid TYPE j_1iregset-j_1iregid,
gv_cust_adrnr TYPE kna1-adrnr,
gv_ecsduty TYPE konv-kbetr,
gv_tot_cen_amt TYPE konv-kwert,
gv_zterm TYPE tvzbt-vtext,
gv_tot_amt TYPE konv-kwert,
gv_amount TYPE konv-kwert,
lv_ins TYPE konv-kbetr,
lv_fre TYPE konv-kbetr.
CONSTANTS : c_ecs TYPE j_1iexcdtl-ecsrate VALUE '0.368',
rdocyr TYPE j_1iexchdr-docyr VALUE 2006.
DATA : wa_t685t TYPE t685t.
DATA : gv_zint TYPE t685t-vtext,
gv_vat TYPE t685t-vtext,
gv_zect TYPE t685t-vtext,
gv_jetc TYPE t685t-vtext,
gv_jeap TYPE t685t-vtext,
gv_jecs TYPE t685t-vtext,
gv_zlst TYPE t685t-vtext,
gv_zcst TYPE t685t-vtext,
gv_zeap TYPE t685t-vtext,
gv_jadc TYPE t685t-vtext.
INCLUDE rvadtabl.
DATA: BEGIN OF lvbplk OCCURS 0.
INCLUDE STRUCTURE vbplk. "Packlistenkopf
DATA: END OF lvbplk.
DATA: BEGIN OF lvbplp OCCURS 0.
INCLUDE STRUCTURE vbplp. "Packlistenposition
DATA: END OF lvbplp.
DATA: BEGIN OF lvbpls OCCURS 0.
INCLUDE STRUCTURE vbpls. "Packlistenstruktur
DATA: END OF lvbpls.
DATA: BEGIN OF tvbdpr OCCURS 0. "Rechnungspositionen
INCLUDE STRUCTURE vbdpr.
DATA: END OF tvbdpr.
DATA: BEGIN OF tvbplp OCCURS 10. "Packlistenposition
INCLUDE STRUCTURE vbplp.
DATA: END OF tvbplp.
DATA: BEGIN OF tkomv OCCURS 50.
INCLUDE STRUCTURE komv. "Kommunikation
DATA: END OF tkomv.
DATA: BEGIN OF tkomvd OCCURS 50.
INCLUDE STRUCTURE komvd. "Kommunikation
DATA: END OF tkomvd.
DATA: BEGIN OF *tkomvd OCCURS 50.
INCLUDE STRUCTURE komvd.
DATA: END OF *tkomvd.
DATA: BEGIN OF hkomvd OCCURS 50.
INCLUDE STRUCTURE komvd.
DATA: END OF hkomvd.
DATA: BEGIN OF tkomcon OCCURS 50.
INCLUDE STRUCTURE conf_out.
DATA: END OF tkomcon.
DATA: retcode LIKE sy-subrc. "Returncode
DATA: repeat(1) TYPE c.
DATA: xscreen(1) TYPE c. "Output on printer or screen
DATA: pr_kappl(01) TYPE c VALUE 'V'. "Application für Preisfindung
DATA: print_mwskz. "Mehrwertsteuer-Kz drucken
data for access to central address maintenance
INCLUDE sdzavdat.
FORM ENTRY *
Einstieg für Nachrichtensteuerung *
--> RETURN_CODE *
--> US_SCREEN *
FORM entry USING return_code us_screen.
CLEAR retcode.
xscreen = us_screen.
Formular öffnen, aufbereiten und schließen
PERFORM formular_invoice USING us_screen.
CASE retcode.
WHEN 0.
return_code = 0.
WHEN 3.
return_code = 3.
WHEN OTHERS.
return_code = 1.
ENDCASE.
ENDFORM. "ENTRY
FORM FORMULAR_INVOICE *
Formular abarbeiten *
FORM formular_invoice USING proc_screen.
Werte aufbauen
PERFORM get_data.
Beleg unvollständig
IF vbdkr-uvall NE space OR
vbdkr-uvals NE space OR
vbdkr-uvprs NE space.
IF proc_screen = space.
retcode = 3.
IF vbdkr-uvall NE space OR vbdkr-uvals NE space.
syst-msgno = '201'.
syst-msgid = 'VN'.
syst-msgty = 'I'.
PERFORM protocol_update.
ENDIF.
IF vbdkr-uvprs NE space.
syst-msgno = '200'.
syst-msgid = 'VN'.
syst-msgty = 'I'.
PERFORM protocol_update.
ENDIF.
ELSE.
IF vbdkr-uvall NE space OR vbdkr-uvals NE space.
MESSAGE i201.
ENDIF.
IF vbdkr-uvprs NE space.
MESSAGE i200.
ENDIF.
ENDIF.
ENDIF.
CHECK retcode = 0.
SAP-SCRIPT STEUERUNG festlegen
PERFORM form_open USING proc_screen vbdkr-land1.
CHECK retcode = 0.
Formular aufbereiten
PERFORM sd_invoice_suppl.
CHECK retcode = 0.
Formular schließen
PERFORM form_close.
CHECK retcode = 0.
ENDFORM. "FORMULAR_INVOICE
FORM GET_DATA *
Daten besorgen *
FORM get_data.
PERFORM vbdkr_data. "Rechnungskopf und -liste
PERFORM vbpla_data. "Packliste
ENDFORM. "GET_DATA
FORM FORM_OPEN *
Formular öffnen *
--> US_SCREEN Output on screen *
' ' = printer *
'X' = screen *
--> US_COUNTRY County for telecommunication and SET COUNTRY *
FORM form_open USING us_screen us_country.
DATA: xdevice(8) TYPE c.
SET LANGUAGE nast-spras.
CLEAR itcpo.
MOVE-CORRESPONDING nast TO itcpo.
itcpo-tdcover = nast-tdocover.
itcpo-tddest = nast-ldest.
itcpo-tddataset = nast-dsnam.
itcpo-tdsuffix1 = nast-dsuf1.
itcpo-tdsuffix2 = nast-dsuf2.
itcpo-tdimmed = nast-dimme.
itcpo-tddelete = nast-delet.
itcpo-tdcopies = nast-anzal.
itcpo-tdprogram = sy-repid.
itcpo-tdteleland = us_country.
itcpo-tdsenddate = nast-vsdat.
itcpo-tdsendtime = nast-vsura.
IF us_screen NE space.
itcpo-tdpreview = 'X'.
itcpo-tdnoprint = 'X'.
ENDIF.
IF sy-tcode EQ 'J1IP'.
itcpo-tdpreview = 'X'.
ENDIF.
CASE nast-nacha.
WHEN '1'.
xdevice = 'PRINTER'.
WHEN '2'.
xdevice = 'TELEFAX'.
itcpo-tdtelenum = nast-telfx.
IF nast-tland IS INITIAL.
itcpo-tdteleland = us_country.
ELSE.
itcpo-tdteleland = nast-tland.
ENDIF.
WHEN '3'.
xdevice = 'TELETEX'.
itcpo-tdtelenum = nast-teltx.
IF nast-tland IS INITIAL.
itcpo-tdteleland = us_country.
ELSE.
itcpo-tdteleland = nast-tland.
ENDIF.
WHEN '4'.
xdevice = 'TELEX'.
itcpo-tdtelenum = nast-telx1.
IF nast-tland IS INITIAL.
itcpo-tdteleland = us_country.
ELSE.
itcpo-tdteleland = nast-tland.
ENDIF.
WHEN OTHERS.
xdevice = 'PRINTER'.
ENDCASE.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = tnapr-fonam
language = nast-spras
OPTIONS = itcpo
archive_index = toa_dara
archive_params = arc_params
device = xdevice
dialog = ' '
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
SET COUNTRY us_country.
ENDFORM. "FORM_OPEN
FORM FORM_CLOSE *
Formular schließen *
FORM form_close.
CALL FUNCTION 'CLOSE_FORM' "...Ende Formulardruck
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
retcode = 1.
PERFORM protocol_update.
ENDIF.
SET COUNTRY space.
SET LANGUAGE space.
ENDFORM. "FORM_CLOSE
FORM SD_INVOICE_SUPPL *
Rechnung aufbereiten *
FORM sd_invoice_suppl.
CLEAR : wa_j_1iexchdr, wa_j_1iexcdtl, wa_lips, wa_duties,
gv_tot_amt.
get data from excise header
SELECT * FROM j_1iexchdr INTO TABLE it_j_1iexchdr
WHERE exgrp = '31'
AND rdoc = nast-objky
AND trntyp = 'DLFC'
AND lifnr = space
AND docyr = rdocyr.
AND exdat IN so_dat.
SORT it_j_1iexchdr BY exdat exnum.
READ TABLE it_j_1iexchdr INTO wa_j_1iexchdr INDEX 1.
SELECT * FROM j_1iexcdtl INTO TABLE it_j_1iexcdtl
FOR ALL ENTRIES IN it_j_1iexchdr
WHERE exnum = it_j_1iexchdr-exnum
AND trntyp = 'DLFC'
AND docno = it_j_1iexchdr-docno.
SORT it_j_1iexcdtl BY exdat exnum.
LOOP AT it_j_1iexchdr INTO wa_j_1iexchdr.
*open form
PERFORM open_form USING 'ZSD_EXCINV' 1
'printer' 'X'.
MOVE : wa_j_1iexchdr-exnum TO wa_header-exnum,
wa_j_1iexchdr-exdat TO wa_header-exdat,
wa_j_1iexchdr-rdoc TO wa_header-rdoc.
get plant details
SELECT SINGLE * FROM j_1iwrkcus INTO wa_j_1iwrkcus
WHERE j_1iwerks = wa_j_1iexchdr-werks.
SELECT SINGLE * FROM j_1iregset INTO wa_j_1iregset
WHERE j_1iregid = wa_j_1iwrkcus-j_1iregid.
SELECT adrnr INTO gv_plant_adrnr FROM t001w
WHERE werks = wa_j_1iexchdr-werks.
ENDSELECT.
MOVE : wa_j_1iregset-j_1iexccd TO wa_header-exccd,
wa_j_1iregset-j_1iexcrg TO wa_header-excrg,
wa_j_1iregset-j_1iexcdi TO wa_header-excd1.
get order no. from vbrk
SELECT * INTO wa_vbrk FROM vbrk
WHERE vbeln = wa_j_1iexchdr-rdoc.
ENDSELECT .
MOVE : wa_vbrk-bstnk_vf TO wa_header-bstnk_vf,
wa_vbrk-zterm TO wa_header-zterm.
SELECT vtext FROM tvzbt INTO gv_zterm
WHERE zterm = wa_vbrk-zterm
AND spras = 'EN'.
ENDSELECT.
get nature of removal
SELECT iever INTO lv_iever FROM eikp
WHERE refnr = wa_vbrk-vbeln.
ENDSELECT.
SELECT SINGLE * FROM t618t INTO wa_t618t
WHERE expvz = lv_iever
AND spras = 'E'.
MOVE : lv_iever TO wa_header-iever.
*get consignment weight.
SELECT SINGLE * FROM vbrp INTO wa_vbrp
WHERE vbeln = wa_vbrk-vbeln.
READ TABLE it_j_1iexcdtl INDEX 1 INTO wa_j_1iexcdtl.
SELECT btgew traid gewei INTO (lv_btgew, lv_traid, wa_header-meins) FROM likp
WHERE vbeln = wa_j_1iexcdtl-rdoc1.
ENDSELECT.
MOVE : lv_btgew TO wa_header-btgew,
lv_traid TO wa_header-traid.
lv_weight to wa_header-meins.
*get chapter id
READ TABLE it_j_1iexcdtl INTO wa_j_1iexcdtl WITH KEY exnum = wa_j_1iexchdr-exnum .
IF sy-subrc = 0.
MOVE : wa_j_1iexcdtl-chapid TO wa_header-chapid,
wa_j_1iexcdtl-maktx TO wa_header-maktx.
ENDIF.
*get customer details.
SELECT adrnr FROM kna1 INTO gv_cust_adrnr
WHERE kunnr = wa_j_1iexchdr-kunag.
ENDSELECT.
SELECT SINGLE * FROM j_1imocust INTO wa_j_cust
WHERE kunnr = wa_j_1iexchdr-kunag.
*write invoice header details
PERFORM write_form USING '' 'APPEND' 'BODY' 'LOCCODE' .
*get data from excise details.
LOOP AT it_j_1iexcdtl INTO wa_j_1iexcdtl.
MOVE : wa_j_1iexcdtl-zeile TO wa_detail-zeile,
wa_j_1iexcdtl-matnr TO wa_detail-matnr,
wa_j_1iexcdtl-maktx TO wa_detail-maktx,
wa_j_1iexcdtl-menge TO wa_detail-menge,
wa_j_1iexcdtl-meins TO wa_detail-meins.
SELECT SINGLE * FROM vbrp INTO wa_vbrp
WHERE vbeln = wa_vbrk-vbeln
AND matnr = wa_j_1iexcdtl-matnr.
SELECT kbetr kwert FROM konv
INTO (wa_detail-rate, wa_detail-amount)
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'ZPR0'.
ENDSELECT.
SELECT kwert FROM konv
INTO lv_ins
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'ZINS'.
ENDSELECT.
SELECT kwert FROM konv
INTO lv_fre
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'ZFRE'.
ENDSELECT.
wa_detail-fob = wa_detail-amount + lv_ins + lv_fre.
gv_tot_amt = gv_tot_amt + wa_detail-amount.
gv_amount = gv_amount + wa_detail-amount.
write item details
PERFORM write_form USING 'LINE_ITEMS' 'SET' 'BODY' 'MAIN' .
ENDLOOP.
**get insurance .
SELECT kwert INTO lv_ins FROM konv
WHERE knumv = wa_vbrk-knumv
AND kschl = 'ZINS'.
ENDSELECT.
**get freight .
SELECT kwert INTO lv_fre FROM konv
WHERE knumv = wa_vbrk-knumv
AND kschl = 'ZFRE'.
ENDSELECT.
**get net value .
MOVE wa_vbrk-netwr TO wa_costs-grandtot.
**calculate netvalue(fobvalue)
wa_costs-fobval = wa_costs-grandtot + wa_costs-insurance + wa_costs-freight.
gv_tot_amt = gv_tot_amt + lv_ins + lv_fre.
*get values for different condition types.
SELECT kbetr INTO wa_duties-zpr0 FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'ZPR0'.
ENDSELECT.
SELECT kwert INTO wa_duties-jadc FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'JADC'.
temp = temp + wa_duties-jadc.
CLEAR : wa_duties-jadc.
ENDSELECT.
MOVE : temp TO wa_duties-jadc.
CLEAR : temp.
wa_duties-st1 = wa_duties-zpr0 + wa_duties-jadc.
SELECT kwert INTO wa_duties-jexp FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'JEXP'.
temp = temp + wa_duties-jexp.
CLEAR : wa_duties-jexp.
ENDSELECT.
MOVE : temp TO wa_duties-jexp.
CLEAR : temp.
SELECT kwert INTO wa_duties-jecs FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'JECS'.
temp = temp + wa_duties-jecs.
CLEAR : wa_duties-jecs.
ENDSELECT.
MOVE : temp TO wa_duties-jecs.
CLEAR : temp.
wa_duties-st3 = gv_tot_amt + wa_j_1iexchdr-exbed + wa_j_1iexchdr-ecs.
SELECT kwert INTO wa_duties-jetc FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'JETC'.
temp = temp + wa_duties-jetc.
CLEAR : wa_duties-jetc.
ENDSELECT.
MOVE : temp TO wa_duties-jetc.
CLEAR : temp.
wa_duties-st3 = wa_duties-zpr0 + wa_duties-st2 + wa_duties-jetc.
SELECT kwert INTO wa_duties-jsad FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'JSAD'.
temp = temp + wa_duties-jsad.
CLEAR : wa_duties-jsad.
ENDSELECT.
MOVE : temp TO wa_duties-jsad.
CLEAR : temp.
SELECT kbetr kwert INTO (wa_duties-jeap_per, wa_duties-jeap) FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'JEAP'.
temp = temp + wa_duties-jeap.
CLEAR : wa_duties-jeap.
ENDSELECT.
MOVE : temp TO wa_duties-jeap.
CLEAR : temp.
wa_duties-jeap_per = wa_duties-jeap_per / 10.
SELECT kbetr kwert INTO (wa_duties-zeap_per, wa_duties-zeap) FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'ZEAP'.
temp = temp + wa_duties-zeap.
CLEAR : wa_duties-zeap.
ENDSELECT.
MOVE : temp TO wa_duties-zeap.
CLEAR : temp.
wa_duties-zeap_per = wa_duties-zeap_per / 10.
(st2jetcjsad)
wa_duties-st4 = wa_duties-st2 + wa_duties-jetc + wa_duties-jsad.
(zpr0+st4)
wa_duties-st5 = wa_duties-zpr0 + wa_duties-st4 .
SELECT kbetr INTO wa_duties-vat FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'VAT'.
ENDSELECT.
SELECT kbetr kwert INTO (wa_duties-vat_per, wa_duties-vat_val) FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'ZVAT'.
temp = temp + wa_duties-vat_val.
CLEAR : wa_duties-vat_val.
ENDSELECT.
MOVE : temp TO wa_duties-vat_val.
CLEAR : temp.
wa_duties-vat_per = wa_duties-vat_per / 10.
SELECT kbetr kwert INTO (wa_duties-zcst_per, wa_duties-zcst_val) FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'ZCST'.
temp = temp + wa_duties-zcst_val.
CLEAR : wa_duties-zcst_val.
ENDSELECT.
MOVE : temp TO wa_duties-zcst_val.
CLEAR : temp.
wa_duties-zcst_per = wa_duties-zcst_per / 10.
SELECT kbetr kwert INTO (wa_duties-zlst_per, wa_duties-zlst_val) FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'ZLST'.
temp = temp + wa_duties-zlst_val.
CLEAR : wa_duties-zlst_val.
ENDSELECT.
MOVE : temp TO wa_duties-zlst_val.
CLEAR : temp.
wa_duties-zlst_per = wa_duties-zlst_per / 10.
(st5+vat)
wa_duties-st6 = wa_duties-vat_val + wa_duties-st5 .
SELECT kwert INTO wa_duties-zint FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'ZINT'.
temp = temp + wa_duties-zint.
CLEAR : wa_duties-zint.
ENDSELECT.
MOVE : temp TO wa_duties-zint.
CLEAR : temp.
SELECT kwert INTO wa_duties-jead FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'JEAD'.
temp = temp + wa_duties-jead.
CLEAR : wa_duties-jead.
ENDSELECT.
MOVE : temp TO wa_duties-jead.
CLEAR : temp.
SELECT kbetr kwert INTO (wa_duties-zect_per, wa_duties-zect) FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'ZECT'.
temp = temp + wa_duties-zect.
CLEAR : wa_duties-zect.
ENDSELECT.
MOVE : temp TO wa_duties-zect.
CLEAR : temp.
wa_duties-zect_per = wa_duties-zect_per / 10.
SELECT kwert INTO wa_duties-zsad FROM konv
WHERE knumv = wa_vbrk-knumv
AND kposn = wa_vbrp-posnr
AND kschl = 'ZSAD'.
temp = temp + wa_duties-zsad.
CLEAR : wa_duties-zsad.
ENDSELECT.
MOVE : temp TO wa_duties-zsad.
CLEAR : temp.
IF wa_vbrk-kalsm = 'ZINSCR'.
wa_duties-total = gv_tot_amt
+ wa_duties-jexp
+ wa_duties-jecs
+ wa_duties-zlst_val
+ wa_duties-zint
+ wa_duties-jead
+ wa_duties-vat_val
+ wa_duties-zcst_val.
+ wa_duties-jecs
+ wa_duties-zeap
+ wa_duties-zecs
+ wa_duties-zsad
+ wa_duties-jadc.
ELSEIF wa_vbrk-kalsm = 'ZINFAC'.
wa_duties-total = gv_tot_amt
+ wa_duties-jexp
+ wa_duties-jecs
+ wa_duties-zlst_val
+ wa_duties-zint
+ wa_duties-jeap
+ wa_duties-vat_val
+ wa_duties-zcst_val
+ wa_duties-jecs
+ wa_duties-zeap
+ wa_duties-zect.
+ wa_duties-zsad
+ wa_duties-jadc.
ENDIF.
Get Condition descriptions.
SELECT SINGLE * FROM t685t INTO wa_t685t
WHERE kschl = 'ZVAT' AND spras = 'EN'.
MOVE wa_t685t-vtext TO gv_vat.
CLEAR wa_t685t.
SELECT SINGLE * FROM t685t INTO wa_t685t
WHERE kschl = 'ZVAT' AND spras = 'EN'.
MOVE wa_t685t-vtext TO gv_vat.
CLEAR wa_t685t.
SELECT SINGLE * FROM t685t INTO wa_t685t
WHERE kschl = 'ZLST' AND spras = 'EN'.
MOVE wa_t685t-vtext TO gv_zlst.
CLEAR wa_t685t.
SELECT SINGLE * FROM t685t INTO wa_t685t
WHERE kschl = 'ZCST' AND spras = 'EN'.
MOVE wa_t685t-vtext TO gv_zcst.
CLEAR wa_t685t.
SELECT SINGLE * FROM t685t INTO wa_t685t
WHERE kschl = 'ZECT' AND spras = 'EN'.
MOVE wa_t685t-vtext TO gv_zect.
CLEAR wa_t685t.
SELECT SINGLE * FROM t685t INTO wa_t685t
WHERE kschl = 'ZEAP' AND spras = 'EN'.
MOVE wa_t685t-vtext TO gv_zeap.
CLEAR wa_t685t.
SELECT SINGLE * FROM t685t INTO wa_t685t
WHERE kschl = 'JETC' AND spras = 'EN'.
MOVE wa_t685t-vtext TO gv_jetc.
CLEAR wa_t685t.
SELECT SINGLE * FROM t685t INTO wa_t685t
WHERE kschl = 'JEAP' AND spras = 'EN'.
MOVE wa_t685t-vtext TO gv_jeap.
CLEAR wa_t685t.
SELECT SINGLE * FROM t685t INTO wa_t685t
WHERE kschl = 'JECS' AND spras = 'EN'.
MOVE wa_t685t-vtext TO gv_jecs.
CLEAR wa_t685t.
SELECT SINGLE * FROM t685t INTO wa_t685t
WHERE kschl = 'JADC' AND spras = 'EN'.
MOVE wa_t685t-vtext TO gv_jadc.
CLEAR wa_t685t.
gv_ecsduty = wa_j_1iexchdr-exbed * ( c_ecs / 100 ).
cen_amt = wa_duties-jexp + wa_duties-jeap.
gv_tot_cen_amt = cen_amt + wa_duties-jecs.
MOVE wa_j_1iexchdr-remtime TO wa_duties-remtime.
MOVE wa_j_1iexchdr-exdat TO wa_duties-exdat.
Convert amount to words.
CALL FUNCTION 'SPELL_AMOUNT'
EXPORTING
amount = wa_duties-total
currency = 'INR '
filler = space
language = sy-langu
IMPORTING
in_words = in_words
EXCEPTIONS
not_found = 1
too_large = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MOVE : in_words-word TO word,
in_words-decword TO decword.
write duty details
IF wa_vbrk-kalsm = 'ZINSCR'.
PERFORM write_form USING 'ZINSCR' 'APPEND' 'BODY' 'GRANDTOT' .
ELSEIF wa_vbrk-kalsm = 'ZINFAC'.
PERFORM write_form USING 'ZINFAC' 'APPEND' 'BODY' 'GRANDTOT' .
ENDIF.
*close form
PERFORM close_form.
ENDLOOP.
ENDFORM. "SD_INVOICE_SUPPL
FORM FORM_TITLE_PRINT *
Formulartitel entsprenchend des Feldes VBTYP drucken *
FORM form_title_print.
CASE vbdkr-vbtyp.
WHEN 'M'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_M'
window = 'HEADER'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'N'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_N'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'O'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_O'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'P'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_P'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'S'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_S'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'U'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_U'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN OTHERS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_M'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDCASE.
IF repeat NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'REPEAT'
window = 'REPEAT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "FORM_TITLE_PRINT
FORM REFERENCE_NUMBER *
Referenznummer ausgeben *
FORM reference_number.
CHECK vbdkr-vbtyp CA 'MUN'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
window = 'INVOICE'
EXCEPTIONS
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "REFERENCE_NUMBER
FORM HEADER_TEXT_PRINT *
Kopftexte ausgeben *
FORM header_text_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'HEADER_TEXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "HEADER_TEXT_PRINT
FORM ITEM_PRINT *
Rechnungsposition ausgeben *
FORM item_print.
Kopieren LVBPLP für direkt Zugriff
LOOP AT lvbplp.
MOVE-CORRESPONDING lvbplp TO tvbplp.
APPEND tvbplp.
ENDLOOP.
LOOP AT tvbdpr.
vbdpr = tvbdpr.
IF tvbdpr-charg IS INITIAL.
PERFORM get_item_prices.
PERFORM get_item_characteristics.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE'.
PERFORM item_price_print.
PERFORM item_characteristics_print.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
PERFORM different_consignee.
PERFORM different_order_no.
PERFORM different_delivery_no.
PERFORM different_extern_no.
PERFORM different_purchase_order_no.
PERFORM item_packing_print.
ELSE.
IF NOT tvbdpr-fkimg IS INITIAL.
PERFORM get_item_prices.
PERFORM item_price_print.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_PRINT
FORM ITEM_PACKING_PRINT *
Verpackung zu einer Position ausgeben *
FORM item_packing_print.
DATA: count LIKE sy-index.
DATA: BEGIN OF hvbplp OCCURS 0,
stufe TYPE i.
INCLUDE STRUCTURE vbplp.
DATA: END OF hvbplp.
DATA: vs_element LIKE vbplp-venum.
CLEAR hvbplp.
REFRESH hvbplp.
Aufbau Versandelementstruktur für Ausgabe
LOOP AT tvbplp WHERE vbeln = vbdkr-vbeln AND posnr = tvbdpr-posnr.
hvbplp-stufe = 1.
MOVE-CORRESPONDING tvbplp TO hvbplp.
APPEND hvbplp.
vs_element = tvbplp-venum.
IF vs_element EQ ' '. EXIT. ENDIF. "unverpackt
CLEAR lvbplk.
WHILE lvbplk-kzobe NE 'X'. "nicht oberstes VS-Ele
suchen übergeordnetes Versandelement
LOOP AT lvbplp WHERE unvel = vs_element.
hvbplp-stufe = hvbplp-stufe + 1.
MOVE-CORRESPONDING lvbplp TO hvbplp.
APPEND hvbplp.
EXIT.
ENDLOOP.
vs_element = lvbplp-venum.
lesen übergeordnetes Versandelement
READ TABLE lvbplk WITH KEY vs_element.
IF sy-subrc NE 0.
EXIT.
ENDIF.
ENDWHILE.
ENDLOOP.
SORT hvbplp BY stufe venum.
CLEAR vbplp.
LOOP AT hvbplp.
lesen Versandelement
CLEAR vbplk.
CLEAR vbpls.
IF hvbplp-venum EQ ' '.Hi,
SAPScript addresses are formated by postal standards...irrespective of the data populated....
In line
/: ADDRESS PARAGRAPH LZ
change to
/: ADDRESS DELIVERY PARAGRAPH LZ
that should bring the street into the address
Regards
Stu -
Getting Page Count for a Multi-Page PDF file using Illustrator script?
Does anyone know how to get the page count of a multi page PDF file? I know you can then open each page using the PDFFileOptions (pagetoopen). But I need to know up front how many pages there are to loop thru to open each page and process each page.
Any Ideas?This script i did for photoshop:
OK so lets do it working on WIN and MAC without any shell script.
This solution is not the best but its working.
I used Try catch to solve it.
Only issue is that you should at least somehow know how many pages you expect in pdf.. this mean if you are working with books or flyers...
Then set the maxPagesCount to that number.
I am working with pdfs with max 20pages.. so i start open the 20 then 19 then 18 and when i am success i know the amount of pages.
Its not the quicker way but its usable.
var maxPagesCount = 20;
var actPagesCount = maxPagesCount;
var opts1 = new PDFOpenOptions();
opts1.usePageNumber = true;
opts1.antiAlias = true;
opts1.bitsPerChannel = BitsPerChannelType.EIGHT;
opts1.resolution = 10; //it will load faster the test page
opts1.suppressWarnings = true;
opts1.cropPage = CropToType.MEDIABOX;
myFunction = function () {
try {
app.displayDialogs = DialogModes.NO;
var fileList = openDialog();
for (i = 0; i < fileList.length; i++) {
actPagesCount = maxPagesCount;
getPagesCount(fileList[i],maxPagesCount);
alert(actPagesCount);
} catch (exception) {
alert(exception);
getPagesCount = function (checkFile, lastPageID) {
try {
for (var checkPage = lastPageID; checkPage > 0; checkPage--) {
opts1.page = checkPage;
var docRef = open(checkFile, opts1, false);
docRef.close(SaveOptions.DONOTSAVECHANGES);
actPagesCount = lastPageID;
return;
checkPage=0;
} catch (exception) {
// Look for next page
checkPage--;
getPagesCount(checkFile,checkPage); -
Printing problem for SAP Script
Dear Friends,
I am facing strange problem for SAP Script. In the billing document output the sold to party and ship to party address are displaying. When user print the billing document on laser printer it print the Country for Sold to and Ship to. But when it print the same billing document on normal printer (other than laser) the Sold to country not printing.
The print preview of billing document in SAP correctly display country for Sold-to and Ship-to.
I have recently make changes in the SAP Script form (Address window) to display country for Ship-to which was never displayed before. I have added FROMCOUNTRY option after COUNTRY in address window. COUNTRY will be Ship-to and FROMCOUNTRY will be VBDKR-SLAND.
Can any one help me to solve this problem.
Regards
Nilesh SheteUsed custom address print option instead of using ADDRESS
-
Hi All,
I have a problem with a sap script (PO) everytime when an item is deleted (on me23e) it doesn't display on the on the print preview and the client wants to see on the preview with a sign indicating the deleted item.
SELECT ebeln ebelp pstyp packno txz01 loekz
FROM ekpo
INTO TABLE it_ekpo
WHERE ebeln = po_no
AND loekz NE 'L'
AND loekz NE 'S'.
This is how it has been read from the ekpo.... Is there something that I need to change?
Thanks in advance.
Regards,
Fred.Hi,
In EKPO table the field 'loekz' indicates the Deletion status.
So u can consider the deleted line item also.
u change u r query like this.
SELECT ebeln ebelp pstyp packno txz01 loekz
FROM ekpo
INTO TABLE it_ekpo
WHERE ebeln = po_no.
In it_ekpo table u can get all the line item(including deleted items).
Then u cn print the data.
Hope this will helps u. -
Problem with SAP Script FAX output
Hi Friends,
I have problem with SAP Script Fax output.
After I issued output using the messge type, the print preview format shows me correct alignments and the right data. But when I go to List display using the menu bar functions from the print preview screen, the list is showing me the right data, but all the alignments at the main window went wrong.
How do I rectify this problem? I need correct alignments in both form display and list display.Hi Sasidhar,
Have you tried with different fax machine.
Regards,
Atish -
Adobe Pro Adds to Page Count When Converting
Hi all,
I am working on a client's document and ran into an issue with pdf conversion. I have the latest edition of Adobe Pro and I'm working on Word 2013. The document is very long (about 695 pages single spaced) and has about 2,000 footnotes. When I convert the Word doc to pdf using the Acrobat icon on the ribbon or the Save As tool, the pdf has a page count that is several pages longer than the original. This is a problem because the publisher's page limit is 700, and the pdf goes over that.
I was able to find a workaround by using the Print to PDF function, but it seems that, when using this function, I am unable to create bookmarks and a clickable TOC (I'm using Word's Heading 1, Heading 2, etc. to do both).
I'm looking for a solution where I can retain the same page count as the original document but also have the bookmarks and clickable TOC. Any ideas? I welcome your feedback, and thank you in advance for your time.Hi cheech1981,
You are posting on acrobat.com online service forums.
Kindly post this query in Acrobat forums:Acrobat
Regards,
Florence -
Quantity field conversion problem in SAP script
Hi experts,
I have problem with sap script quantity field conversion.
In purchase order the actual value of field( MDPM-ERFMG) is 3,500.
But in Print preview it is showing only 3.5
Any one Please help me in this problem
thanks in advance
muraliHello,
check this:
Number of Decimal Places
A program symbol of one of the data types DEC, QUAN, and FLTP can contain decimal place data. Use the option below to override the Dictionary definition for the number of decimal places for the formatting of this symbol value.
Syntax
&symbol(.N)&
The EKPO-MENGE field contains the value 1234.56. The Dictionary definition specifies 3 decimal places and an output length of 17.
&EKPO-MENGE& -> 1,234.560
&EKPO-MENGE(.1) -> 1,234.6
&EKPO-MENGE&(.4) -> 1,234.5600
&EKPO-MENGE&(.0) -> 1,235
REgards,
Vasanth -
Which script is called when click "edit page" option from SharePoint gear icon?
HI All,
Which script is called when click "edit page" option from SharePoint gear icon?Hi,
By inspecting the “Edit” button in the ribbon using IE Developer(F12), we can see that there is a function “CoreInvoke” in the click event of this button.
By default, the “CoreInvoke” is defined in
Init.js file which locates in 15 hive.
Best regards
Patrick Liang
TechNet Community Support -
Initially, when I open Firefox everything opens very quickly. However, after several minutes it gets hung up when opening new pages. I have close the browser and reopen it to start over. But each time it does the same thing. Works well at first then poops out. The trouble started yesterday. Before then, I never had any problems.
I've tried disabling all the plugins and extensions, but it doesn't make any difference.Try to repair the disk permissions:
* http://thexlab.com/faqs/repairprocess.html
* http://support.apple.com/kb/HT2963 Troubleshooting permissions issues in Mac OS X -
Post Author: tadj188#
CA Forum: Formula
Needed: Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount > 28
Background:
1) Report SQL is created with unions to have detail lines continue on a page, until it reaches page footer or report footer, rather than using subreports. A subreport report is now essentially a group1a, group1b, etc. (containing column headers and other data within the the report with their respective detail lines). I had multiple subreports and each subreport became one union.
Created and tested, already:
1) I have calculated @TotalLineForEachOfTheSameGroup, now I need to sum of the individual same group totals to get the total line count on a page.
Issue:
1) I need this to create break on a certain line before, it dribbles in to a pre-printed area.
Other Ideas Appreciated:
1) Groups/detail lines break inconveniently(dribble) into the pre-printed area, looking for alternatives for above situation.
Thank you.
Tadjexport all image of each page try like this
var myDoc = app.activeDocument;
var myFolder = myDoc.filePath;
var myImage = myDoc.allGraphics;
for (var i=0; myImage.length>i; i++){
app.select(myImage[i]);
var MyImageNmae = myImage[i].itemLink.name;
app.jpegExportPreferences.jpegQuality = JPEGOptionsQuality.high;
app.jpegExportPreferences.exportResolution = 300;
app.selection[0].exportFile(ExportFormat.JPG, File(myFolder+"/"+MyImageNmae+".JPEG"), false);
alert(myImage[i].itemLink.name) -
Problem with sap script table in main window
hi all,
i have created a sap script for which output is in 7 pages.
except first page all the remaining pages are giving the correct output.
the problem with the first page is iam not not getting vertical lines in the table which is in the main window of page 1.
iam getting the vertical lines correctly in the mainwindow table of all the remaining pages.Hi,
It's simple,
Pre- U should had declared a second page for the same window with header, main & footer.
now
First when u r looping the internal table provide no of rows eg Row 1 TO 10. in the Loop ( Data Tab)
or
when defing TEXT Go to PC Editor and mention all the fields Under PROTECT - ENDPROTECT.
This would solve the issue.
Thanks
Ravi -
PROTECT-ENDPROTECT problem in SAP Script
In SAP Script MAIN Window I have 10 different elements to print differet stuff related with each delivery line item.
Like Material Number
Material Description
Long text [Has formatted text and I am reading that text and printed in some format some lines under material number and some under materail desc.]
and other information required by client.
Loop at Delivery item table.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'PROTECT'.
Print differnt elements.
Loop at lond text internal table.
print in proper format as I mentioned.
endloop.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
ENDLOOP.
My problem is PROTECT ENDPROTECT is not working properly.
It is printing only 1 item with other info on first page as there are enough space left to print minimum three items with details.
on next page it is priting only 3-4 items as there are enough sapce to ptint at lease 10 items with details.
The only good thing is it is not spliting the Item details and other text.[Main window on next page has bigger size]
Any idea why PROTECT - ENDPOTECT not behaving properly.
Thanks
Aman
Message was edited by: Amandeep SinghHello,
Try to do like, Put PROTECT and ENDPROTECT in the SAPScript itself.
Like
Element 1
Protect
..matnr....
element 2
...desc....
element 3 (long text)
...text
....text
element 4
endprotect
call the element 4 in the loop statment, whenever required.
Hope it will work.
Regards,
Naimesh. -
Printing Problem in sap script
Hi all,
There is a printing problem in z report of sapscript.
when I am giving continuous print ...
1st page is right in print format but in 2nd page the text comes 1 row up...and so on...
so the starting point for all page are not same...
Please help me...Hello,
Check SAP note 39259.
Regards,
David
Maybe you are looking for
-
When I highlight objects, I'm able to move them with the arrow key but I can't drag them with my mouse.
-
Loading swf into swf in exact position
It's very simple to load an external swf into a main swf with loadMovieNum("name.swf", 50); But how do I control the position of the loaded swf? Currently it just pops in the top left.
-
Last date of Month based on SY_DATUM.
Hi All, I need last date for a month based on SY-DATUM. Is there any FM which fulfills above criteria. Regards, Yugesh A. Moderator message: date calculation questions = FAQ, please search before posting. Edited by: Thomas Zloch on Mar 21, 2011 12:39
-
Having a problem downloading previously downloaded Apps to iTune 11.0.2 on a MacBook with OS 10.6.8 with Snow Leopard. Any suggestions?
-
Hi, i'm trying install Java Studio Creator on my laptop, and it doesn't work. First, i notice that on my desktop, everything is ok. But on my laptop (i'm running under linux debian), the setup reaches 12%, then in the section "AppServer8", it goes di