Problem In Save of BDC (Create PO)

Hi All,
Actually this is not a problem I have resolve the issue by other way but why it was not happening with the previous way I am not able to get that why putting the thread in forum.
I have created one BDC for ME21. Every things is working Fine.Manually I am able to save data with T Code in ME21. But When I am running the BDC with Saving Mode as L (Local) and (A Asynchronous) data not save and the program come out.
At the same time if I am using the BDC Mode as S (Synchronous) it working fine and giving me desire result.
I have check No back ground Job schedule while running with A and L. I have waiting for 24 hours also may be data save late Some time it happen But nothing like that also.
I am really confuse Can some body told me any reason for the same. Although problem is solve by S. But Why Only S.
Regards
Swati Namdeo

I have already used COMMIT . Still the same problem.
regards
Swati Namdev

Similar Messages

Networking problem after a zone is created and installed

Hi all,
I've got a networking problem after a zone was created and installed on a Solaris 10 box. The box was configured with two NICs, one (e1000g0) with a public IP address, the other one (e1000g1) with a private IP address and connected to a local switch. All worked fine so far.
Then I created a local zone with shared networking (e1000g1). The zone has a private IP address which is in the same subnet as e1000g1 on the global zone. After some time, I noticed that I could not access (ssh, ping) the global zone. Then after some time, the global zone became available. The problem happened quite frequently.
Also I observed that: 1) When the global zone was unavailable from outside, it was available (ssh, ping) from another box within the same subnet (e1000g0); 2) If I shutdown e1000g1, the problem was gone.
Any idea what caused this problem?
Many thanks,
Xiaobo

It was a route problem.

Unable to save a PDF created from a secure webpage in Acrobat X

Hi,
Our Acrobat X standard won't 'save' or 'save as' PDFs created from a password secured website. Same symptom on two machines here. Other PDFs work fine.
The workflow we're using is opening acrobat, selecting create pdf from website, and then specifying a website with an https address and entering a username and password to access the site. This generates a pdf which looks great, all the links work etc... but when you click 'save as,' absolutely nothing happens. You're left just looking at your PDF with no save window or anything opening.
This gets done every day in the office here. I suspect the latest update may have caused the issue?

Hi Bill@VT,
Thanks for your reply!
I checked document properties and security is off. I've also unticked "Enhanced Security" under Security (Enhanced) in the Edit > Preferences menu.
This issue is only affecting our acrobat 10 and acrobat 11 users. I still have a couple acrobat 9 users here and they're unaffected.
The Save As button is not greyed out -- it's available but clicking on it just closes the file menu and does not open the save as dialog box.

Is possible in acrobat reader fill in and save interactive PDF created with LiveCycle Designer?

is possible in acrobat reader fill in and save interactive PDF created with LiveCycle Designer?

Hi,
Only if the form has been Reader Enabled before it is sent out to the user with Reader.
There are two ways of Reader Enabling the form. One using Acrobat Standard v9 or Acrobat Professional v8 (both have license restrictions). The other is to use LC Reader Extensions ES2, which is a server product (additional costs).
Some info here:
http://www.assuredynamics.com/index.php/2010/11/using-livecycle-forms-in-acrobat-and-reade r/
A search of the forums for "Reader Extensions" or "Reader Enable" will give more information.
Hope that helps,
Niall
Assure Dynamics

Problem on the configuration about creating an SPN for your CMS on a Window

I have some problem on the configuration about creating an SPN for your CMS on a Windows 2003 domain
My Environment:
Domain Controller and AD Server :SV01
Crystal Report Server: SV07
Domain Name: SVG.NTT.LOCAL
I created a domain user "BOUSER" in SV01
When type the following command in the SV01, it have not any response.
"SETSPN.exe u2013A BOBJCentralMS/SV07.SVG.NTT.LOCAL BOUSER"
And i cannot find the "Delagation" tab in the domain user property window.
Have any wrong in the command ?

Hi Tim,
Thank you for your reply.
We used Tomcat and MySQL database.
I have only integrating with AD and requiring manual logon.
I had created a bscLogin.conf file and krb5.ini file
krb5.ini file:
[libdefaults]
    default_realm = DNS.COM
    dns_lookup_kdc = true
    dns_lookup_realm = true
[realms]
DNS.COM = {
    kdc = SV01.SVG.NTT.LOCAL
    default_domain = SVG.NTT.LOCAL
bscLogin.conf file
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required;
And insert the following two lines in Tomcat's Java Tab
-Djava.security.auth.login.config=C:\WINDOWS\bscLogin.conf
-Djava.security.krb5.conf=C:\WINDOWS\krb5.ini
I also set Serivice Principal Name "bouser FQDN" in Crystal Report Server.
We can login in Central Management Console with our domain user.
But When we logon in InfoView with our domain user account.
It display the following error:
"Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again."
Any step i missed ?

Is it possible to save/export Messages created in the Discussions Panel?

Is there a way to save/export messaegs created in the discussions panel? For example, when saving a report to PDF or Excel, is it possible to include the discussion messages? Is there a way to query the Discussion Messages so that they could appear on a report?

You can't query for discussions directly in a report. In the CMS database this information in a binary format.
You would have to either use the Query Builder tool or write a program using the SDK to get to it. The query you would run looks something like this:
Select *
from CI_INFOOBJECTS
where SI_PARENTID = (SI_ID of the report the discussion is attached to)
and SI_HIDDEN_OBJECT = 1
and SI_KIND = 'DISCUSSIONS'
-Dell

How can I save a website created on iweb, but that I no longer have it saved in my computer, so I can open it in my new computer and republish it ......

How can I save a website created on iweb, but that I no longer have it saved in my computer, so I can open it in my new computer with iweb
and republish it on another server, since mobile me would be gone on jun 2012.

You need the Domain.sites2 file that's located in your Users/Home/Library/Application Support/iWeb folder in order to be able to manage and publish the site from another computer?
Do you have that file? If you do copy it to the same folder on the other computer and you're ready to go.
If not then you'll have to recreate the site from scratch. Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site. 1
OT

How do I save a website created on IWeb 08 on one computer, so that I can open and adjust it on Iweb 08 on a other computer? pleas help me with this.

How do I save a website created on IWeb 08 on one computer, so that I can open and adjust it on Iweb 08 on a other computer? pleas help me with this.

Ernst ~ Welcome to the Support Communities. See this post:
Editing my iWeb page from another computer

How to save a book created in Aperture 3 for future uploading for printing?

How to you save a book created in Apeture 3 to send for printing several months after creating book. I've create several books, had them printed and get request for reprints. I don't want to keep the photo files in Aperture for space considerations.

If you are printing through Apple then you have to send the order using Aperture. You could export the book as a new library and archive that to save space in the original library. Keep im mind that exporting this way will not remove the originals from the Aperture library, you will need to remove those yourself.
If you are not using Apple to print the book you would need to save whatever it was (pdf file?) that you sent to be printed the first time.

How do I save a document created in pages in iphoto?

How do I save a document created in pages in iphoto?

Thanks, I will try that process.
I used to be able to convert Pages document easily to iPhoto before I upgraded to Lion. Used to be able to go to: File > Print> PDF (bottom left corner of print dialog box)>Save as PDF to iPhoto.
Now if I do that I have option to save as PDF to iTunes but not to iPhoto.
The advantage of saving Pages to iPhoto was that it was very easy to send email of collages of photos created in Pages.

I want to save a document created in Pages and can't login to iCloud.

I want to save a document created in Pages and can't login to iCloud.

Have you tried logging in from your computer?

Problem in "Save & refresh data" in epm ribbion

Hi Experts,
I got a problem in Save data option .
I had a report with values but now i changed it into input-form to enter values . After entering my values i'm clicking on SAVE DATA button in epm tab but my problem is it is showing success but the data in the input-form is not changing...
can anyone provide me solution please................

Thanks for reply, but my problem is that it is not saving the data in the cube dimension, must apply the notice specified above.
Greetings and Thanks

Problem in Save and Save As Option

Hi All,
I hv developed a swing application in that,
I hv a problem in save and saveas option. When i click "saveAs" and choose a directory the file is getting saved to the directory which i choose. And after that if change anything and click "Save" the file is saved to the default directory i.e the program execution directory.
Is there anyway to change this. Kindly help me.
Thanks in Advance.
ss

First thing is not to cross-post.

Problem: Socket connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time

Problem: Socket
connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time
Environment: -
OS:
Windows XP SP2/7
Code:
VC 6.0
Dll: MFC
Problem Description: -
We have written a utility program which create socket (Using windows standard method [MFC]), and then make connection with another service (List Display) running
on port 3334 in different machine and retrieve the required list data. This program was working fine in almost all the machines.
But, we have received a severe intermittent issue on two machines. Client is facing issue in displaying the list data from port 3334.
Attempt: -
First we tried to debug code, and we come to know that socket is not creating in utility program. So we tried to telnet on ListDisplay service port 3334 and we were surprised that we were able to telnet, then we opened some more
telnet window on same port 3334 around (6 to 8) window, and each cmd connected properly. But we were not able to create socket from utility program.
Problem is severe because issue is intermittent.
We have tried all the way, but we are not able to figure it out, that what can be the exact problem and what are the conditions, when utility program will not
connect with ListDisplay service on port 3334.
Kindly assist to resolve this issue. For any help, we would be really thankful.

Hi,
According to your description, it seems that you have created an utility program which is making connection with another service port 3334, however, two clients are facing issue in display the data list from port 3334.
Port: 3334/TCP
3334/TCP - Known port assignments (1 record found)
Service
Details
Source
directv-web
Direct TV Webcasting
IANA
Since the port 3334 is used by directv-web service, I'd like to suggest check this service it is working well on the problematic clients.
1. The client can be resolved in DNS well? Please run "nslookup" in the prompt command.
2. Is there any 3rd party application interrupting? Do test in clean boot.
2. Strongly suggest you run process monitor tool to analysis it.
I am looking forward to your reply if you have any updated on your side.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

LabVIEW ofter hangs for seconds after save, run command, creating variables, etc.

Dear users,
my LabVIEW installation often hangs after common commands such as Save, Run, after creating variables (the label is draw directly, then after few seconds the variable and the wire is created), etc.
LabVIEW 14.01f (32bit)
Windows 7 64bit
The same version of LabVIEW on Windows 7 on other computers runs smoothly. Only that particular super-new and high-performance Lenovo laptop drives everybody in the team crazy.
Any suggestions, what should I check, please?

Other reasons for such delays can be network drives that are currently disconnected or point to resources not currently available on the network. Or installed printers pointing to printers not currently available. And last but not least system drives that are trashed with large amounts of files in important system locations.
While the first reasons can be fixed by removing such drives and printers altogheter, the last point only really is fixable by a clean reinstallation of Windows. And no it's not just LabVIEW that usually gets affacted but just about any application when accessing the file system, for instance very noticable when opening the file select dialog in any application.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Problem In Save of BDC (Create PO)

Similar Messages

Maybe you are looking for