Problem in saving project frm labview 8.5 to 8.2

i m facing problem while saving the project frm 8.5 to 8.2
while doing this i recieve message of following Vis missing
1 Teststand-ExecuteMenu Command.vi
2.Teststand-Insert Command in Menu(Execution View Manager.Vi
3.Teststand-Insertcommand in Menu (SequencefileView Manager .vi
4.Teststand-Insertcommandin Menu.vi
5.Teststand-Remove Command from Menu.vi
plz solve this problem

Hello Eler,
I'm the AE from the french support who tested your class.
I tested your big class with different version of LabVIEW and with all the versions, I had the error.
I tested with LV8.5.1 french, LV 8.2.1 french and english, LV8.2 french and english,LV7.1 fench.
For me with LV 8.2.0 english version your class doesn't work.
I attached screen shots for all tests.
Regards
VéroniqueD
NI France
Attachments:
error assembly.zip ‏382 KB

Similar Messages

Error saving Project 2010 files to network drive - doesn't see network drive

ANSWERED (11 April 2014):
So it seems the resolution to this is to simply create a new share with a different name. I used the existing folder (to retain NTFS permissions) and just select to Add a new Share (applying the same Share permissions as the non working Shares).
Deploying this new Share via Group Policy as a test resulted in staff being able to open files from Windows Search, save files through MS Project and the Share being accessible through browsing SMB.
All problems resolved by using a new share name for the existing folder. Seems to be a corruption in the namespace.
Note: I had previously deleted the share and recreated it. I had removed all NTFS permissions and readded (through both the GUI and icacls). This didn't make a difference.
Only changing the name of the share fixed the problem.
Original Question
Already
posted here... but Microsoft Support has not responded.
It seems some staff on some computers are having problems saving MS Project files to the network. This is only since an upgrade to SBS2011 (from SBS2003). The only difference now, is that network drives are mapped via group policy rather than a 'net
use' script.
This is affecting users on Windows 7 and Windows Server 2008 R2, with either MS Project 2007 or 2010. The users have full change access to the folders and can create new files and modifying existing files, just not a MS Project file. Other file tyes, e.g
Word .docx, Excel .xlsx, Adobe .pdf files, all work fine. These files can be opened, edited and saved normally without problem.
To replicate this:
The user opens an existing file or creates a new file on the network folder (either through Windows Explorer or MS Project). They then click File > Save in MS Project and receive the following error (see pic below):
An interesting symptom of this is that if you select File > Save As in MS Project, the Sae As dialog box doesn't remeber the path location of the network drive. MS Project instead prompts to save the file in the local users documents folder (see pic below):
If they browse back to the original folder where the file was saved and choose to save it there, they are of course, prompted to overwrite the existing file and they can save the file. But the same thing happens every time they open the file.
It seems the problem is that Project isn't seeing the path of the file or that the network drive is attached.
If a user closes the file without saving it, they are prompted to save the file and the prompt shows the drive path:
Do you want to save changes to "N:\... Projects\Active Projects\CC...\F4 Project Plan File\004 Programme\test project file.mpp"?
But choosing to save the file gives them the same result as Save As, they are prompted for a new location as if the original file location doesn't exist.
I have disconnected the mapped drive and connected it again using net use but get the same error.
I have reinstalled MS Project 201, installed Project 2010 SP2 and installed Windows updates and it does the same thing, exactly the same symptoms.
Further, if the user opens a file from the network drive, the file shows in the Project recent files list. If they try to open the file from the recent files list in project they get the following error:
"Project cannot open the file.
-Check that the file name and path are correct.
-Check that the file format is recognized by Project.
Project files saved in a version earlier than Microsoft Project 98 can't be opened...."
This is a test file that I created on the user's computer and network drive, This is being opened with the same version it was created in. If I browse to the folder in Windows Explorer I can open the file. Of course, I then can't save the file (I still get
the original error). I'm logged on with Domain Admin privileges.
I've checked these links from other threads (neither apply to my scenario):
http://support.microsoft.com/kb/983458/en-us|
http://social.technet.microsoft.com/Forums/en-US/excel/thread/2eeea140-7e6c-4cb9-a89b-06d2102bd9f7/
I've downloaded my TechNet version of he software and installed it with Sp2 and Windows updates and it does the same thing. This also happens on the Remote Desktop server (Server 2008 R2) using MS Project 2007.

Case 1
This error message appears when the document is open on two or more computers that are running different operating platforms. For example,
if the document is open on a Macintosh computer and you open it on a second computer running Windows or Windows NT, the error occurs when either user tries to save the document.
This problem stems from a difference between the ways Macintosh OLE and Windows OLE open files. As a result, you cannot save a file on two different operating platforms at the same time.
Case 2
This error occurs in Word 97 for Windows if you save to a MAPROOT type network drive connection on a NetWare server where spaces exist in
the file or folder name.
Case 3
This problem may occur if an anti-virus program running on a network has the ability to scan for macro viruses in documents in shared network
folders.
For example, if you have the following:
a shared folder on a network server
-and-
an anti-virus program is running on the network server that is set to monitor the shared folder,
when you attempt to save a document (across the network) to the shared folder, the anti-virus checker may cause the error to occur.
Case 4
This problem may occur on Novell networks when the AutoRecover files path is either blank or set to a network drive.
According each, please try the following workaround:
WORKAROUND
To work around this problem, use one of the following methods appropriate to your situation.
Case 1
Method 1:
Move the document to your local hard disk for editing. Move it back to the server after you finish.
Method 2:
Save a copy of the
file with a different
file name, and work on the copy, either on your hard disk or on the server.
Case 3
Method 1:
Move the document to your local hard disk for editing. Move it back to the server after you finish.
Method 2:
Do not use spaces in the directory or document names.
Method 3:
Do not use MAPROOT-drive connections. Map your drive connections to the volume-level only.
Case 4
Turn off the anti-virus protection on the network server and then try to
save the document. Contact your anti-virus protection software company for additional details and/or updates to their programs.
Case 5
Set the AutoRecover files path to your local drive. To change the AutoRecover path, use the following steps:
1.
On the Tools menu, click Options.
2.
On the File Locations tab, select AutoRecover files and then click Modify.
3.
Change the Modify Location dialog box to a
folder on your local drive and then click OK.
4.
Click OK to close the Options dialog box.
Hope that helps.
Smith

Problem in saving image to jpg

Hello.
I've got a problem in saving a LabView Picture in a jpg File.
The picture id grabbed from a DirectX Livestream from a camera.
Then I want to save it in a jpg file using the Standard LabView Functions.
But all I get is an empty jpg File and an error:
Check_Data_size.vi
Error 1
I'm using LabView 7.1.
Has anybody got an idea how to solve the problem?

No. You can save a gray image to jpg, but I has to be 24 bit.
Try save your data to bmp. If you got the same problem, that means you fail to wire correct data format to the LabVIEW VI you're using.
George Zou
http://gtoolbox.yeah.net
George Zou
http://webspace.webring.com/people/og/gtoolbox

Elements Organizer 12 Error Saving Project in Adobe Premier Elements 12

When I try to save a slide show project using Elements Organizer 12 in Adboe Premier Elements i get an "Error Saving Project" message and it will not let me save my project. Can you help?

Kirk Oswald
Thanks for the updates.
Just a point of clarification. Did you ever disable the psa.prf file by renaming it to psa.prfOLD? It sounded like you could not. If that was the case, was there any message associated with the program not wanting to follow you directive? Was it a saving matter or did you get a pop up about permissions? If a permissions one, did it give you an option for Continue? If so, did you click on Continue?
1. Let us try to get the psa.prf deleted or disabled if possible.
2. Then create a new catalog. See Elements Organizer 12, File Menu/Manage Catalogs/Catalog Manager,
Let us see if we can rule in or out the two above.
Besides the problem with the Save Project in the Slideshow Editor, are you seeing that problem anywhere else? (I know that you said you do not have a problem with the Output option Save As A File Movie WMV.
ATR

Premiere Elements 8 won't load recently saved project

I'm using Adobe Premiere Elements 8 to create a highlight video. I made two videos last year and didn't have this problem but this video is slightly longer. About twenty minutes total consisting of approximately 100 video clips. I've added one more group of clips and not when I try to load the saved project I just get a gray blank screen. The load message finishes but nothing appears. The drop down menus are mostly still grayed out. No good selections except to press load project again. This causes a system error that shuts down the application. Any tips or tricks are appreciated.
Thanks,
Dave Flick

Bill, here is the good news.
I updated the Quick Time like you suggested but no help. I updated the video driver but no help. I disabled the hardware acceleration but no help. During this time I realized the problem started after I upgraded McAfee. I remembered the new McAfee Real Time scanning effected my Outlook software. So I disabled the McAfee Real Time scanning and then Premiere Elements 8 would successfully load my saved project. What a relief. I went back and Turned On the McAfee Real Time scanning but changed the setting to only scan programs and documents, not all files as previously set. I'm back in business and really appreciate your help. Thanks a million.
Dave Flick

PSE 10 Error Saving Project

I have been getting an error message: "Error Saving Project" when I try to save my PSE 10 slide show. I am unable to save any changes. I have closed out the project and opened it again and received the same error message. Any help would be appreciated.

Hi, I am also having this same problem.
I've been making changes to this particular slideshow for weeks. Today I did about 2 hours of work and now I can't save the project. Error message is "Error Saving Project". I've also tried saving to new a new file name with the same results.
I didn't add or delete any slides today. I only added zoom/pan to several dozen slides. There are about 70 slides overall.
I have not exited the program for fear that I will lose all my work.
Does anyone have something to try?
Thanks,
Paul

Prel 13 saved project files will not open, or Prel stops working.

         Sandgrass-Saved files of Prel 13 projects will not open in Prel 13. Is there any way to reclaim/alter these files to where they will open? Could there be a missing codec?
        My computer—Hpe 580t, Win 7 Professional 64-bit OS with second internal 1 TB hard drive;
           Intel R Core, TM i7 CPU 950 @ 3.07 GHz,      RAM 9.00GB
All of my clips and stills were taken on my Nikon CoolPix P500. They will import just fine from PSE organizer or from Prel 13 organizer and I can edit just fine. The trouble seems to be when I attempt to open the saved project files for further editing or adding movie theme and scene markers for a 54-minute movie.
                   I have tried opening from within Prel 13 and from the stored files on my Data Drive E:. Prel opens the project and tries to load; then an error msg appears: “Premiere Elements has stopped working. Windows will close the program and let you know if a solution is found”, or an error message says "Cannot open:---this file is not compatible with Pre"l. Only one copy of several edited and rendered copies of the project will open, and I am very afraid to touch it until someone can maybe suggest a solution. I tried saving copies of the one working file, but none of them will open. Thank you for your assistance.      Sandgrass

LionkillerArt
Did you say that you were working on Windows or Mac? For now, assuming Windows,
1. Go to the Adobe Folder in Documents (should be there unless you changed the default).
2. Locate the project.prel file of interest in Adobe Folder/Documents Folder/Premiere Elements Folder/11.0 Folder. Inside the 11.0 Folder, among some folders and other files, are the project.prel files if you did not do any special organization. Right click the project.prel of interest and select Open With, followed by Premiere Elements 10. Does the project now open?
Do you have any versions of Premiere Elements on your computer except this Premiere Elements 10?
Have you deleted or moved any of the source media that went into your project after you saved/closed any of these projects? Where are your source media stored? If on an external hard drive, is the drive letter of that drive changing on its own?
What happens if you rename one of the problem project.prel files in the Adobe Folder and then try to open it from there?
Just some thoughts for now.
We will be watching for further developments.
Thanks.
ATR

Cannot open saved project/make new projekt - whats wrong?!?

i made last days a nice idvd project with a lot of slideshows. all was working fine, i was able to save it, open it again, work on it etc...but then:
when i want to open saved project idvd just mark the file, i hear my harddrive working - and nothing happens! i made the update from aplle, but same problem - idvd stays frozen if i want to open the project. so i tryed to make new project - its doing the same!
free space on harddrive 34,7 GB...i reinstalled and made update from apple but it wont help.
does anybody nows how to fix the problem?!?

Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides. Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
Yours Bengt W

After saving project upon reopening one of my video files and it's corresponding audio is red

After saving project upon reopening one of my video files and it's corresponding audio is red (both are offline). Attempts at relink result in a warning that the audio will be deleted (which is does when tested).
This project is based on a multicam sequence (2 video files) and using Pro CC (latest Cloud build).
Anyone come across this and/or have a solution? Thanks in advance.

Appreciate your assistance and guidance Mark. Yes, I am a newbie on this forum - and fairly new to premiere pro though have used elements since version 4. I'll answer your leads below.
First off, some bookkeeping & jargon matters:
"you reported the file extension (.mts) but not the codec of the video therein. AVCHD?"
.mts files are Sony AVCHD files. filmed with Sony NXCAM NXU5 camera.
"re: the version you're on, rather than simply stating "the latest," it helps to report the exact version numbers as shown in the About box. That not only avoids any confusion today but also aids customers who come upon a thread months from now."
Version is 7.2.0
"you refer to "rendering" to a new format. I know that "render" is the right term in some NLEcosystems, but with Premiere we distinguish between rendering and exporting/encoding. Rendering is reserved for creating preview files for smoother playback within PPRO, whereas exporting/encoding covers writing a sequence out to an output clip."
My bad - I exported/encoded the sequence to a new output clip.
Now back to our regularly scheduled troubleshooting. Three questions:
did you start this project in CC7.1 and then update to 7.2/7.2.1 along the way?
I started this in 7.2.0
are either of the clips in the multicam sequence spanned?
I don't know what "spanned" refers to
I gather that you created the multicam sequence via the new workflow in the Project panel: select the clips, right-click>CreateMulticamSourceSequence. Am I right?
Correct
If so, please create a new sequence, set the timeline to insert sequences as individual clips (via the left-most button under the timecode control), add the multicam sequence to the new sequence, and post a screenshot of the timeline.
Now all of a sudden I am able to open my project file(s) as before with no problems.... very curious.
I did this and then could not find my multicam sequence.... so no screen shot... BUT what happened?
thank you for your guidance with this.

Premiere creates garbage zero-byte file while saving, project file dissapears/corrupts

Hi guys,
I've been experiencing a strange intermittent technical problem with Premiere project saves (and sometimes After Effects project files).
Case:
- Editor opens a project.
- After a moment, as editor hits 'save'.
- A strangely named file appears in the save location with no extension (a long string of characters separated by hyphons).
- Sometimes, this garbage file disappears and project is saved. Other times, this file remains and original project file disappears and the editor doesn't even know!
- If editor hits save again, a message box appears saying the file has been modified since last save - hit cancel or OK.
This issue has meant that we've lost project files, and have had to recover them from auto-save and/or Creative Cloud sync folder.
Sometimes it saves ok!
This is what the strange file looks like.
I don't know if this issue is related to Adobe software, Mac os or Linux but we've only run into it while using Adobe software.
Sometimes, After Effects throws an error related to this as well, forcing you to either 'save as', or incremental save.
It's a networked editing environment - all clients are Mavericks macs, working from a Ubuntu Linux server via SMB via gigabit ethernet. All clients are authenticated to the server as the same Admin user. Directory and Create masks are 0755 in SMB settings. SMB.conf also has some tuning parameters: socket options = TCP_NODELAY IPTOS_LOWDELAY SO_RCVBUF=65536 SO_SNDBUF=65536
Op-locks are disabled at server-side (I thought it could be to do with oplocks).
Does anyone have any ideas?
Or perhaps someone could explain to me the behind-the-scenes process that happens when Premiere executes a save?

Glad to hear it's not me going crazy, but unglad that you're experiencing it!
Recently we replaced SMB with NFS as the protocol for sharing our main raid volume and cache, and since then this issue no longer happens.
This definitely points to the way Adobe apps with with SMB. I have a feeling it's something to do with oplocks or something behind the scenes that denies PP access to the project file for overwriting it.
TBH, as a bonus NFS feels like a rocketship to planet editor-bliss. It's a proper beast. Unfortunately I'm not sure how good the Windows implementation is (I know certainly that only windows 7/8 enterprise clients are able to access NFS shares, which is a bummer for most).

The timesheet creation failed, because of problems with the project I server or with data validation

Hi,
One of my user is facing issue in creating new time sheet,
"The time sheet creation failed, because of problems with the project server or with data validations".
This issue is coming to only few members out of 10000 members.
Note: For the same user, can able to do in other machines. only the problem in his machine. Have ran the office diagnostics, but still the problem persists.
Is any add-on's/any settings need to update in IE. Could any one please help me on how to fix this issue?
Many thanks in advance.

I would check the compatibility settings in IE etc, or try another browser (chrome, safari etc.)
Ben Howard [MVP] | web |
blog | book

Saving projects with Transitions and Titles - iMovie 3

Every time I edit a movie in iMovie 3, add transitions and titles, and then save, the next time I open the project, I get a window saying there are x number of stray clips (my transition and title clips) and would I like to move them to the clip panes or leave them alone. Either way, they end up being out of order. Why will they not stay in the edited order that I put them in, even after I hit Save?

I do Save the projects this way and all the clips show up in the edit panel below the clip frames. BUT, none of the Transition or Title clips stay in the edit panel below. Each time I open the saved project, a message window appears saying that there are x number of stray clips (the Transition and Title Clips). Then it asks me if I would like to leave them alone or put them in the clips pane. If I put them in the clips pane, then I have to once again reposition them where they belong in the edit panel below. This happens every time.

Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

Problem while saving date field in custom table

Hi,
Iam facing the following problem while saving a date field in custome table
i have a date field zdate in which the value is 02082010.
now when i try to insert this value in the custom table it is getting updated as 20/10/0208 , but it should be 08/02/2010
How can i correct it..
Regards
Kumar

just before saving u might have to use a string reverse FM and then save it..
CALL FUNCTION 'STRING_REVERSE'
EXPORTING
    STRING          = p_string
    LANG            = sy-langu
IMPORTING
   RSTRING          = r_string
EXCEPTIONS
   TOO_SMALL        = 1
   OTHERS           = 2

I have problem in my project, please Help me, urgent

have problem in my project.
When i start using project, i recive a errore in flash player
if it possible troubleshooted for me
Problem file

The problem is that you have left paper on the floor near the
wastebasket.
Please you have to do a little of the work yourself.
First, post a topic that has a title regarding your problem.
That way people who know about that problem will be more likely to
take a look.
Second, don't just say you have a problem and receive and
error. Shay what kind of problem and tell us what the error says.
Third. Most people won't download a file from any random
stranger off the net. So don't expect that is going to explain it.
Fourth, even if the file does explain it, why should a
stranger have to do all the steps that you should have done?
Fifth, do a little work yourself, what have you tried to fix
it?
Sixth. Just because it is urgent to you doesn't mean it is
urgent to everybody else.
So try some of these things and post back.

Problem in saving project frm labview 8.5 to 8.2

Similar Messages

Maybe you are looking for