Problem in saving the details of 0590 infotype...
Hi Experts,
When im trying to save the longterm reimbursement amount
in 590 infotype itis howing the error message that """Hard furnishing scheme is not available for the employee number ** on 01.04.2007"""
What could be the problem.Where should we change the details....
Please advice.
Regards,
V ram.
Hai.
Pls check 40LTR feature.
The feature 40LTR is configured to default the end date for long term
reimbursements infotype (0590). The defaulted end date for the infotype
could be begin date dependent or a fixed end date. The validity period of
the reimbursement is the block of years specified in the feature. The
configuration can be done for the sub types of the infotype like HFS-
Hard furnishing scheme or SFS- Other reimbursements. The block of years
and fixed end date are separated by a forward slash in the respective
order.
I doubt u didnt configure this feature... for Hard furnishing scheme...
Edited by: Ram Manohar on Mar 25, 2008 5:20 PM
Similar Messages
-
Problem While saving the Invoice
Dear Experts,
I am facing the Problem while Saving the Invoice, In invoice, We assigne the Output as RD00 and Medium as 6 (EDI).
When we are saving the Invoice, it getting as ' Updated Terminated'. When i found where the Error is coming in SM13, it showing in as Function Module "RV_MESSAGE_UPDATE' & Error Details is 'EAN11 not found for Material'.
But in Invoice whatever we enter the Material number, we maintain the EAN11 code. This EAN11 code is seen in MARM & VBRP Table. Unable to find the what the exact error is.
please help me to sort this issue, Its business complicated.
Thanks in Advance,
SriniHi Asik,
Thanks for your valuable Message.... I run as you suggested, but the dispatch time i kept as 1 or 2. because the program RSNAST00 is picking the values only for 1 or 2. so i run manually,, as of now the issue is, in the invoice number, for one material number, the Billed quantity is zero, so the UOM is getting as initial. From those vaues we are picking the EAN11 from maram table.
So, i modify that and run the EDI manually. As of now its working...
Thanks for your reply,,,
Regards,
Srini -
Problem in saving the customize infotype data
Dear All ,
I created the new infotype with table control, when am going to save data it's only saving the header data means personal no ,begdate and end date my table control data is not going save kindly help me to resolve that question.How i can save data from that custmize infotype ,And also am not a fully technical guyyy...so help me ....
It's very important for me ...
kindly help me .......
thanks
sandeepDear Amit ,
I don't think that's the issue i craeted two infotype in second infotype i have only fields ,am able to save the data but in other infotypes i have the table control,am not able to save table control data in my PAXXXX table so kindly help or tell me the procedure how we can do.Now hope you understne my problem.
kindly help me
sandeep -
A problem about saving the picture control'image in a child VI.
i want to use 'export image' method to get a picture control'image,so ,i have a child VI to use method 'export image',and a main VI to using the child VI,but when i run the main VI,there is no image is saved on the disk ,but if i open the child VI'frontpanel,then,i run the main VI,the image is saved on the disk,i want to know the reason why i can not get the image,when i run the main vi without the child 'frontpanel or blockdiagram is opened.
Solved!
Go to Solution.
Attachments:
child.vi 11 KB
main.vi 7 KBThe behavior that Simon describes is not a hard and fast rule, and the Export Image method used to be a bit of an exception. It would supposedly update the controls of unopened FPs that used the method. Reality never quite matched what was described in the documentation if I recall.
If you pore over the detailed help you discover that this method works fine in SubVIs with some controls and not others. Look at the characteristic 'Loads the Front Panel Into Memory', for a Picture control it is 'No', for a Waveform Graph, for instance, it is 'Yes'. Caveat: Relying on this level of detail to be correct in the LV help is a bit risky. Best to try it yourself. Not loading the FP is a good hint that the method is not going to behave in a SubVI.
As to the problem at hand, a Picture Indicator is an odd choice to me to use this method. You have VIs in the Picture palette to convert pictures to image data and then export the image data to a PNG or JPG or BMP file directly. Anything you would draw and then export could be exported directly without drawing. -
Problem in saving the WAD template
Hi gurus,
I am getting a probelm while saving the WAD template; error occurred in the BI components on the SAP J2EE EngineHi Karanam,
Maybe you should check with your BASIS team on the error. Could be a problem with ABAP - JAVA configuration settings on your BI system. If you are on Netweaver BI 7, below notes on compatibility may help:-
1013369 - SAP NetWeaver 7.0 BI - intermediate Support Packages
1163789 - NetWeaver 7.0: BI Java Synchronized Patch Delivery Strategy
1011241 - Patches for NetWeaver 2004s BI Java Support Package
1072576 - FAQ: BI Java Support Packages/Patches
1327345 - Patches for NetWeaver 7.01 BI Java Support Package
1391286 - BI JAVA corrections for SAP EHP1 for NetWeaver 7.0 (7.01)
--Priya -
Problem in saving the workbook as favourite
Hi,
I have a issue around saving the BEx reports as favourites.
One of our user is not able to save his report in his favourites folder. He was able to do the same before,but now he can't do it anymore.He gets a pop up error message'WDTTREE - type mismatch' type....This is a problem with only few users and not all of them.
I know we can set the object changeability in RSA1 but that should affect all or none of the users as it is set globally.So,is it possible that I can check it somewhere if that user does have the authorisation for saving the reports as his favourite. There is no direct authorisation problem with his userid as I have checked the SU53 dump also with his logon.
rgrds
Umesh
Message was edited by:
Umesh MehraHi Shabar,
Am on 3.5 and this note points to 3.0,I guess. Also,as I mentioned,it's a problem with only one user and not with all the users. Rest of the users are ok their favourites.
rgrds
Umesh -
Hi,
I am doing INIT without data transfer.
When I go in monitor and try to see the details I not able to see any thing , its not displaying any of the TABS of monitor like Hedear , Status and Details.
When I go to data target and try to open from again it dont displays anything.
Can anybody let me know if have faced similar problem?
Thanks , JeetuHi Jeetu,
Please can U check the Scheduling options inthe Infopackage screen, plz ensure that the job has been scheduled either immediately or to a specific time period.
If it was a immediate run, plz check the job status in SM37 for both source system and BW. If the job has ran successfully then you should get some logs for that, U will not find logs unless until the job hasn't ran (or) started.
Hope this should help U.
Regards,
Syed -
Problem navigate from the "detailed navigation"
Hi ,
I created a role that include workset.
the pages of the workset are being displayed in the "detailed navigation" area .
when i navigate from "a" to "b" in the ""detailed navigation"...i have 2 problems :
1. sometimes i see the portal logon page .
2. it navigate back to the entry point of the first displayed role .
Any ideas how to solve this problem ???
Thanks Faniel.If your portal is abc.foo.bar.com:5000 and your iView tries to access content in abc:50000, then you might be prompted to logon again.
Are the WD applications running on the same instance as the portal, or are they running on a different instance?
What is the cookie lifteime?
Cheers -
Problem in filtering the detailed report
Hello All,
I am having scenario where i need to jump from xcelsius to BW web report for details and i want this web report to be filtered by plant value .I have created the flash variable i have referenced the input value to the palnt cell in dashboard excel sheet. when i run the dashboard i am getting filtered out put in dashboard but in the detail web report i am getting all values and filter has no effect.
can anybody please help me regarding this?
Thank You very muchIf you create a multiprovider with the two ODS you wont have this problem.
Hope it helps.
Regards. -
Problem when saving the outline
Hello:
We're working with Essbase 9.3.1.
When saving an outline with EAS, the message windows "Starting save of outline" appears and it never close (even if the modification is as simple as adding an alias or an UDA). We've found that If we make Ctrl+Alt+Supr and press cancel in the client machine, the message disappear inmediately. So, it seems a Java problem. Does anyone knows any solution for this issue?
Thanks in advance and regards,
Joaquin CastellanoHi,
I take it you are accessing EAS through the web client, if you it will probably down to using the 1.6 JRE.
You can install the 1.5 JRE and go to control panel > java > Java > disabled the 1.6 versions and keep just the 1.5
Or you can have a read [here |http://john-goodwin.blogspot.com/2008/09/never-ending-eas-outline-save.html] for futher details
Ok?
Cheers
John
http://john-goodwin.blogspot.com/ -
Problem in saving the Rating and Discussion?
hi all,
I am using EP6 SP16.
I have enabled Rating service.
But when I give rating to any document or folder by going to details --> collaboration --> Rate this document.
Then when I click on Save button to save the Rating, it gives the message <b>"Rating has not been saved"</b>. Although when I again click on details, rating has been saved there.
So if rating is getting saved there why I am getting the message that "Rating has not been saved"
2. Same Problem I am facing with discussion also, When I start a discussion on any document or folder, it gives a message that "<b>You do not have access permission</b>".
If you have any idea please suggest me how can I solve this problem.
Thanks and Regards,
Mridulplease reply me if any body have any idea.
It is very urgent.. -
Problem in saving the image into SQL database..
Hello,
In my application I have to save image file (say jpg) into the database and retrieve back and display it on the applet. I am through with grabbing the pixels of the image & sending the pixel array to the servlet but I am struck in how to store the image into the database and retrieve the same.
Can anybody please help me in this regard... its really urgent...
Thanks in advance
SwarnaHello.
I've been researching this problem (saving images in a MySQL database) in order to accomplish a task I was assigned to. Finally I was able to do it. I'd be glad if it will be of any use.
First of all: the original question was related to an applet. So, the post from rkippen should be read. It says almost everything, leaving the code job for us. Since I managed to write some code, I'll put it here, but I'm not dealing with the byte transferring issue.
To obtain a byte array from a file I'd open the file with FileInputStream and use a loop to read bytes from it and save them into a ByteArrayOutputStream object. The ByteArrayOutputStream class has a method named �toByteArray()� which returns an array of bytes (byte [] b = baos.toByteArray()) that can be transferred in a socket connection, as said by rkippen.
My problem was to save an image captured by a web camera. I had an Image object, which I converted into a byte array and saved into the database. Eventually I had to read the image and show it to the user.
The table in the MySQL database could be:
CREATE TABLE test (
id int(11) NOT NULL auto_increment,
img blob NOT NULL,
PRIMARY KEY (id)
)I had problems trying to use the �setBlob� and �getBlob� methods in the Statement object, so I used the �setBytes� and �getBytes� methods . In the end, I liked these methods most because they where more suitable to my application.
The database operations are:
public int insertImage(Image image) throws SQLException {
int id = -1;
String sql = "insert into test (img) values (?)\n";
PreparedStatement ps = this.getStatement(sql); // this method is trivial
byte [] bytes = this.getBytes(imagem); // * see below
ps.setBytes(1, bytes);
ps.executeUpdate();
id = ps.getGeneratedKeys().getInt(0); //Actually I couldn't make this line work yet.
return id;
public Image selectImage(int id) throws SQLException {
Image img = null;
String sql = "select img from test where id = ?\n";
PreparedStatement ps = getStatement(sql);
ps.setInt(1, id);
ResultSet rs = ps.executeQuery();
if (rs.next()) {
byte [] bytes = rs.getBytes(1);
img = this.getImage(bytes); // * see below
return img;
}* If the bytes are read directly from a file, I think it is not necessary to convert it into an Image. Just send the bytes to the database method would work. On the other hand, if the image read form the DB will be written directly into files, the bytes obtained from rs.getBytes(1) would be enough.
The image operations are:
public byte [] getBytes(Image image) {
ByteArrayOutputStream baos = new ByteArrayOutputStream();
try {
ImageIO.write(this.getBufferedImage(image), "JPEG", baos);
} catch (IOException ex) {
throw new RuntimeException(ex);
return baos.toByteArray();
public Image getImage(byte [] bytes) {
Image image = null;
ByteArrayInputStream bais = new ByteArrayInputStream(bytes);
try {
image = ImageIO.read(bais);
} catch (IOException ex) {
throw new RuntimeException(ex);
return image;
public BufferedImage getBufferedImage(Image image) {
int width = image.getWidth(null);
int height = image.getHeight(null);
BufferedImage bi = new BufferedImage(width, height, BufferedImage.TYPE_INT_RGB);
Graphics2D g2d = bi.createGraphics();
g2d.drawImage(image, 0, 0, null);
return bi;
}That's it. I hope it is useful. -
Problem in saving the project!!!
Hi friends..
Now I am creating Dynamic UI elements, The problem is I cant save my project.
Bcz if i give save, then the coding which i created have is automatically deleted..
Can anybody explain wat i have to do for this ...
Urs GSHi GS,
maybe you have to give us some more details about your problem, because automatic deletion of source code isn't a feature of WD;)
But WD generates a lot of source for you, as you probably already know. Therefor you'll find hook methods in the generated code, where you can insert your code, marked with //@@begin and //@@end. In addition to that you have at the end of each source file a dedicated section where you can place additional methods or inner classes.
Where did you placed the code that gets deleted?
Regards,
ok -
Problem While Saving the editable ALV GRID
Dear Experts,
I have a scenario in which i am display the ALV(using class) with some data in the custom container of module pool screen in the non-editable mode.Also i have save and edit buttons.If i click the edit button i have written the code to edit the some columns in the ALV grid, it is working fine.After editing it,when i click the save button then ALV has to refreshed with edited data and then it should go to non editable mode but it is not working.I have written the code for changing the editable ALv to non editable mode as follows :
call method c_alvgd->set_ready_for_input
exporting
i_ready_for_input = 0.
*****Row and column of the alv are refreshed after changing values
stable-row = 'X'.
stable-col = 'X'.
*REfreshed ALV display with the changed values
*This ALV is non editable and contains new values
call method c_alvgd->refresh_table_display
exporting
is_stable = stable
exceptions
finished = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Could you Suggest me solution for this issue ?
Thanks & Regards,
R.Dhineshraj.Dhinesh,
I suppose that you are able to get your changes values on screen but not able to get your field in DISPLAY mode from editable mode, let me know if this is not your problem.
When you press SAVE, after the PAI, again PBO will run and hence the editable code for that field will overwrite which will keep it editable.
So, do something like this.
data: gv_edit value 'X'..... "global variable in TOP include
PBO....
loop at ...
if gv_edit = 'X'.
CALL METHOD lo_alv->set_ready_for_input
EXPORTING
i_ready_for_input = 1.
else.
CALL METHOD lo_alv->set_ready_for_input
EXPORTING
i_ready_for_input = 0.
endif.
endloop.
PAI.
when 'SAVE'.
gv_edit = space.
When 'EDIT'.
gv_edit = 'X'.
Regards,
Diwakar -
Problem while saving the BEx qeueries
Hi,
I am facing a strange problem.
I am trying to copy the old query to a new query. Now when i just change/try to copy by using save as function in query designer the following problem occurs
1. An unexpected object variable or with block variable not setu2019 error occurred in wdrblog error(s) are logged.
I am using BEx 3.5 patch 11.
Note: I checked the relevant error message in Service marketplace but they are asking us to go thorugh the OSS note 571831,575434. But in these mentioned notes the patch level & Version are lower than what we have.
Waht might the problem. any clues would be great & appreciated
ThanksHello Venkatesh,
I didn't come across this type of problem before, just try to copy the query by using t-code 'RSZC'. Check the query whether everything is correct.
Let me know if you need more information to copy the query.
Thanks,
Umashankar
Maybe you are looking for
-
Appending to new line in text file
I am trying to append text to a new line to a file. I set the append parameter to true and I try to output the new line character after I write the string to the file. However it is still appending the next string to the end of the first rather than
-
Sound Level Pressure with several channel
Hello, I met a problem with the VI "SVL Exp Avg Sound Level.vi". It works perfectly if I make a measurement with a single microphone, but with more microphones I have some computation error with discontinuity depending on the buffer size. The followi
-
How to maintain LCM job integrity while promoting?
Hi Question/Issue: We are trying to find out how to maintain job integrity while promoting using LCM? This is from a process security perspective that "only tested and approved items should move from QA to PROD" Use Case/Scenario: We are using BO in
-
Hi All, At present I am trying to implement the imaging solution. When I try to import the definitions from I/PM it's giving me the following error. Policy Store Error: The User 100.weblogic does not exist in the policy store. Policy S
-
What is the xpath syntax to find all xml comments?