Problem in saving tiff from PS

I am using LR 4.1, and PS6 with ACR 7.1, although I have this same issue PS 5.1 and ACR 6.7. I select "edit in Photoshop", and when finished save as a tiff (same problem with PSD) in the same folder where the raw file (in my case CR2) is. The saved tiff looks far different from the way it looked in PS. Typically it is much lighter. In fact, I can select "edit in Photoshop", do nothing in PS, save as a tiff the same thing occurs. If I save the tiff to another folder, there is no change. So, it appears LR is modifying the tiff image in some way when saving. This is with Windows 7 and ProPhoto RGB in both LR and PS. Any help would be greatly appreciated.
Ken Carney

Make sure that in Photoshop you have your color settings right.
In PS go >Edit >Color Settings and select "Pro Photo RGB" as working space under RGB.
Then under >View make sure that "Proof Colors" is unchecked.

Similar Messages

Problem with saving TIFF from PDF in Photoshop and importing into Corel

I work at a publishing company, and some of our designers use CorelDraw X14. We receive most of our advertising material in PDF format, which I then have to convert to TIFF in Photoshop (I use CS4). Most of the time this works fine, but lately, the TIFF files appear ragged and very low resolution (especially the text) once they are imported into Corel. When I re-open the TIFF files in Photoshop they seem fine, as well as viewing them with a picture manager program. Does anyone have any idea why this happens, and if the problem lies with the may I save the TIFF files or the way they are imported into Corel? TIFF files created from Corel don't have the same problem.

I concur with Bart - they are using the preview because someoen ticked a wrong checkbox or enabled a fast preview mode... Should print and export without issues, though.
Mylenium

Saving tiff from Raw file is very slow (10 min) CS6?

MY OS is 10.7 and using CS 6, Raw 8.3.0 . I am having difficulty saving files from my RAW file, it is now taking up to 10 min just to do a simple save in photoshop. I have 32 GB of Ram and 2700GB on an internal scratch disk. The process of saving will stop at about 50% then stall and at about 8-10 min the file will save as a tiff. What is going on, this just started in the past week?
I reinstalled all programs and OS and updated CS6

anmacka wrote:
MY OS is 10.7 and using CS 6, Raw 8.3.0 . I am having difficulty saving files from my RAW file, it is now taking up to 10 min just to do a simple save in photoshop. I have 32 GB of Ram and 2700GB on an internal scratch disk. The process of saving will stop at about 50% then stall and at about 8-10 min the file will save as a tiff. What is going on, this just started in the past week?
I reinstalled all programs and OS and updated CS6
Whenever I begin to experience a slow-down in my system (Mac OS) I launch "Activity Monitor" which shows me where all my CPU and RAM resources are being allocated and how much. This is where I will usually find the resource hog. There is probably an equivalent system utility for Windows OS.
The next thing I would check (often alluded to by the resource allocation check above) is what programs are being automatically loaded at launch -- your Start-Up list. For a Mac this can be found in the User info. I believe Windows also has this list, maybe somewhere in the Control Panel.
Next, I will do as R_Kelly suggests and replace my preferences files for both Photoshop and Bridge. I have a good copy of each file saved where I can reload it when necessary.
Last I will do a diagnostic hardware test, available on Mac OS by accessing the recovery disk. Not sure about Windows, probably in System Accessories folder or in the Control Panel. Once I discovered I had a bad stick of RAM memory that was slowing things down and even causing Photoshop to crash. Also check to see if your Scratch Disk is clean and defragmented. I re-formated my Scratch Disk once and that cleared up a problem I was having with Photoshop.

Problem in saving ztable from va01 screen through exit

Hi all,
I am facing problem while saving ztable through additional data b tab screen of va01.
Actually I have add table control in tab and on the basis of vbeln i am saving table control data in ztable.
but all data saved except vbeln.. why it's happening? I have applied conversion also and it's showing in debug mode.
but in table vbeln field is not appended. vbeln is primary key in my ztable.

Hi,
follow these steps:
1. Create your table and add it through Append Structure in VBAK table.
2. Create screen in Additional Data B.
3. Field should be dic object
4. Save and activate both Table as well as your Screen.
Save data automatically inserted into your custome table. I did it and it is working fine.

Problems hightlighting/saving images from pdf

Hi, when I try to save a highlighted part of an image in my pdf, an error occurs: "An interal error occured." Also, when I try to save an image, it just saves them blank...
I don't know if anyone has had the same experience(s), or perhaps even a link to someone with the same problem.
Thanks,
killdemall

killdemall wrote:
Hi, when I try to save a highlighted part of an image in my pdf, an error occurs: "An interal error occured." Also, when I try to save an image, it just saves them blank...
More details would help. Not sure what you mean by "save a highlighted part of an image".
What is it that you are doing, what steps are you taking to get where you are at and what tools are you using to get there?

HT204150 I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

It is locked to your sisters carrier.
She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

Why has my new ipad stopped saving photos from Facebook? Problem could have started when I downloaded the new OS.

Why has my new IPad stopped saving pictures from Facebook. Worked originally and problem may have started when I downloaded OS 6.

You are correct that the behavior started when you installed iOS 6 - but as Chetan6518 explained - you now have to configure it in the settings.
Along with the suggestion above, there is also a Photos setting in Privacy and that gives access to approved apps for photos as well.
Last of all, make sure that you haven't set a photos restriction in Settings>General>Restrictions>Privacy>Photos

Saved Tiffs will not open in CS2 and generate a "Could not complete your request because of a program error".

this was supplied by Ann Shelbourne.
Saved Tiffs will not open in CS2 and generate a "Could not complete your request because of a program error".
These files will often open in Photoshop 7.0.1 or in CS1 but not in CS2.
The trouble may be caused by bad dates in the EXIF data and can originate from an incorrectly-programmed digital camera; or from a scan that was created after after Jan1 of this year (because of a known bug in some scanner software).
If someone runs into the "Could not complete your request because of a program error" problem, and does not have CS1, try opening the Tiff in TextEdit.
The EXIF data is right at the top. Check the EXIF data for bad creation dates and change any incorrect ones there.
Save and close; and then the file will probably open in CS2 without a murmur.

> If iPhoto causes problems why not open the images from the Finder?
I get the error if I open a file from within iPhoto using "OPen in external editor" and then alter it (or do not alter it) and try to save it over itself, or save it anywhere else.
I get the error if I do "Show file" in iPhoto to see the file in the Finder. Then, if I double-click and it opens in PS, and then alter it (or do not alter it) and try to save it over itself, or save it anywhere else.
> And with »save it anywhere« You indicate that You use the Save As-command?
Right.

Having trouble saving tiff files to server

Hi all,
I'm having trouble saving tiff files to our server (a mac pro running OSX 10.5.7 client not server). I get the error message 'could not save "filename" because write access was not granted. The disk in question is set to ignore permissions and the other 3 Macs on the network have no problems.
Bizarrely this only seems to happen when saving as a Tiff file, I can save as JPEG without issue! The file will usually save after a few attempts, sometimes six or seven save as' are needed.
This problem comes and goes, but at the moment its pretty bad.
This is becomming very frustrating as Tiff is our prefered format and we work as a team so have to save to the server.
Any ideas?

Just to expand on Buko's correct ansswer, this is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://www.adobe.com/support/techdocs/322391.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Error, problem with saving documents, Illustrator

I have a problem with saving documents in Adobe Illustrator (CS6): when I import to my document some jpg, tiff etc (even it isn't huge) Illustrator is crashed ("program to stop working correctly because of a problem. Windows will close the program and notify you if there is a solution available."). Next: program close.
But when I work only with objects from AI - everything is ok - any error, I can save it.
I have reinstalled and updated AI. And nothing changed.
What is a problem?

<moved from Downloading, Installing, Setting Up to Illustrator>

Saving Video from a Sony Handycam HDD - I'm stuck in iMovie ****!

We foolishly bought a Sony Handycam HDD video camera last year, thinking we could save our movies to DVD using the computer.
I can do it using the laptop we got my daughter for Christmas, but this isn't really feasible. My G4 has iMovie 3.0.3. and even though I recently upgraded to a 2Ghz processor, I still can't install the iMovie I bought with iLife '08 2 years ago.
I need to be able to save files from my Sony handycam to my computer and burn DVDs. Or even if I could just burn them without saving, that would be fine.
I have heard that I need StreamClip from Apple and I see that I need to buy Apple MPEG-2 converter first and then I see in the feedback category for that product, everyone who gave it bad marks was trying to do what I'm trying to do. Then I read somebody recommended Quicktime Pro...
I'm completely confused..and frustrated!!!!
Is there a version of iMovie that will work for me even though I just have a plain old 2Ghz processor?
Would Quicktime Pro or some other software do it for me? I don't mind paying $30 for some software that I'm only going to use for saving movies from camera to DVD, but I'd rather upgrade iMovie if that was possible.
thank you.
(I'll come in off the ledge now...)

Hey. This is a really good question because I too have run into video problems with mine. After a couple of years I couldn't stand it anymore so I sprung for a MacBook Pro for myself this past Christmas. When I say video problems I mean I can't watch a DVD, a video on the net, etc. It's a pain.
But I still haven't given up on it. Currently it's just used for storage. Did that processor upgrade make any difference for you? I've been looking into that upgrade along with an upgrade to Leopard on the Quicksilver to see if it can handle the video.
We bought a Panasonic video recorder and have a G5 (pardon me but I don't know the processor speed). Even that computer wouldn't recognize the video files stored on the recorder and refused to import them. I called Panasonic and they explained I needed iLife '09. (Currently on the G5 there is '08 and it is running Tiger.)
What you might want to do is a couple of simple upgrades. First the OS to Leopard and then upgrade your iLife to '09. I can say that the camcorder works like it should with iMovie '09 just like the rep at Panasonic said it would.
Hope this helps.
Frank

Saving Data from ALV.

hi all.
I have an issue regarding saving data from alv to data base table.
The problem is like this. I have an internal table consist of 10 column from three diferent tables.one primary key is there.
now i have displayed it in alv grid. there is a column of quantity. i made some changes in quantity of some rows. now i want to save it into the database table from which that quantity field fetched.
i used first check_changed_data method. if the flag is set it means data is changed.
wat shud i do to save that quantity column into data base.
Thanks In advance.
varu

Hi,
To modify database or ztable from the ALV grid,you need to do the following:
---You have to modify the field Catalog fields (fields that you want to make editable).Set the field EDIT as 'X'.For example if you want to make the field below editable:
ls_fcat-fieldname = 'CARRID'.
ls_fcat-edit = 'X'.
APPEND ls_fcat TO pt_fieldcat.
---Call the method below before you call the set_table_for_first_display.
CALL METHOD ALV_GRID_INSTANCE->set_ready_for_input
EXPORTING
i_ready_for_input = 0. ( For Display ) and ('1' for Edit )
After this put the set_table_for_first_display.
Now if the ALV data has changed,and you want to change the database or ztable,then in your pf status give a function code for SAVE button in the GUI.
In the PAI of the screen,in user command module write the following:
WHEN 'SAVE'.
call method gr_alvgrid->check_changed_data
importing e_valid = l_valid.
if l_valid = 'X'.
MODIFY spfli FROM TABLE itab_spfli.
endif.
(l_valid is a flag.
DATA:l_valid type c.
If you want to check if the user has entered any value on the grid, use the Method : CALL METHOD gr_alvgrid->check_changed_data.
This method returns a flag l_valid which can be checked to see if the data on the ALV grid has been changed or not.)
Regards,
Beejal
**Reward if this helps

Can't see my saved picture from the internet

hi guys, i have one serious problem, i cant see my picture that has been saved before from the internet. so when i got a picture from google and i saved it, i cant find it in my "pictures" in the media categories on my playbook. do anyone knows where the playbook stores my saved picture from the internet? please help me T.T
Solved!
Go to Solution.

hey entimp,thanks for your reply. but i found out that there are only "all pictures" and "wallpaper" within my pictures app, there isnt "downloads". what do you think??

Problem in saving project frm labview 8.5 to 8.2

i m facing problem while saving the project frm 8.5 to 8.2
while doing this i recieve message of following Vis missing
1 Teststand-ExecuteMenu Command.vi
2.Teststand-Insert Command in Menu(Execution View Manager.Vi
3.Teststand-Insertcommand in Menu (SequencefileView Manager .vi
4.Teststand-Insertcommandin Menu.vi
5.Teststand-Remove Command from Menu.vi
plz solve this problem

Hello Eler,
I'm the AE from the french support who tested your class.
I tested your big class with different version of LabVIEW and with all the versions, I had the error.
I tested with LV8.5.1 french, LV 8.2.1 french and english, LV8.2 french and english,LV7.1 fench.
For me with LV 8.2.0 english version your class doesn't work.
I attached screen shots for all tests.
Regards
VéroniqueD
NI France
Attachments:
error assembly.zip ‏382 KB

Problem in saving image to jpg

Hello.
I've got a problem in saving a LabView Picture in a jpg File.
The picture id grabbed from a DirectX Livestream from a camera.
Then I want to save it in a jpg file using the Standard LabView Functions.
But all I get is an empty jpg File and an error:
Check_Data_size.vi
Error 1
I'm using LabView 7.1.
Has anybody got an idea how to solve the problem?

No. You can save a gray image to jpg, but I has to be 24 bit.
Try save your data to bmp. If you got the same problem, that means you fail to wire correct data format to the LabVIEW VI you're using.
George Zou
http://gtoolbox.yeah.net
George Zou
http://webspace.webring.com/people/og/gtoolbox

Problem in saving tiff from PS

Similar Messages

Maybe you are looking for