Problem in Screen field position ( Module pool )

Hi Experts,
We changed the screen field position ( GUI ) of SAP standard module pool program. we had taken the access key from SAP and modified the layout.
Our Problem : We had transported these change request to Quality and Pre Production. The changes are transferred correctly in Quality . when coming to Pre Production the changes are not visible on the screen.
Checks Performed : 1. We had analyzed the Transport request - They are imported correctly.
2. We had rechecked the layout that we had changed its good and correct.
Can you experts help me out in identify the exact solution for this problem.
- Best Regards,
Sudhakar Puppala
Edited by: CRM Sudhakar on Sep 16, 2010 11:25 AM

Hi, no idea can be given without having a look..
but just check the screen layout in the pre-production itself..instead checking transport..

Similar Messages

F4 help for the screen fields in module pool program

Hi All,
I have a requirement that, i want to provide F4 help for the 2 fields in module pool program. the fields are document number and fiscal year from rbkp table.
i could provide search help for two fields.
but how to select matching fiscal year for that document number.
problem: i am getting fiscal year as first four digits of document number.
please help me to solve this problem.
Thanks & Regards,
Namratha.V

Hi,
If your requirement is after selecting the document no from f4 help then the corresponding year should be updated in the document year field then use FM --> DYNP_VALUES_UPDATE
In this function module pass the screen no program & field for which u want to update value

Search help for screen fields in module pool

Hi All,
I have a screen in Module pool which has 3 input fields, each input field is attached to the same search help.
These fields are from ztable . I have created a search help USING these 3 fields. All the 3 fields are marked for IMPORT and EXPORT.
So whenever i click F4 on any of the above 3 fields, It will display search help popup and returns some rows...But the values are transfered back only for 1 fields ..i.e for the first field only .
I want that ...as soon as i select any of the row from Search hit list..all the 3 columns should get populated with corresponding fields from that row.
I require it this way as user wants to select based on * selection.Ex: as then every this related to that should be popped up.
Pls help ASAP
Thanks,

This is how i got.
data:l_shlp type SHLP_DESCR,
l_rc type sy-subrc,
w_DDSHRETVAL type DDSHRETVAL ,
ls_shintf LIKE LINE OF l_shlp-interface,
t_DDSHRETVAL type TABLE OF DDSHRETVAL.
DATA: dyname LIKE d020s-prog,
dynumb LIKE d020s-dnum.
DATA: BEGIN OF dynpfields OCCURS 3.
INCLUDE STRUCTURE dynpread.
DATA: END OF dynpfields.
CALL FUNCTION 'F4IF_GET_SHLP_DESCR'
EXPORTING
SHLPNAME = 'YTESTDMSSB'
SHLPTYPE = 'SH'
IMPORTING
SHLP = l_shlp .
ls_shintf-valfield = 'X'.
MODIFY l_shlp-interface FROM ls_shintf TRANSPORTING valfield
WHERE shlpfield = 'SNNTX'.
MODIFY l_shlp-interface FROM ls_shintf TRANSPORTING valfield
WHERE shlpfield = 'SBRTX'.
MODIFY l_shlp-interface FROM ls_shintf TRANSPORTING valfield
WHERE shlpfield = 'SBSTX'.
MODIFY l_shlp-interface FROM ls_shintf TRANSPORTING valfield
WHERE shlpfield = 'ENPTX'.
MODIFY l_shlp-interface FROM ls_shintf TRANSPORTING valfield
WHERE shlpfield = 'PLANT_CODE'.
CALL FUNCTION 'F4IF_START_VALUE_REQUEST'
EXPORTING
SHLP = l_shlp
DISPONLY = ' '
MAXRECORDS = 500
MULTISEL = 'X'
CUCOL = SY-CUCOL
CUROW = SY-CUROW
IMPORTING
RC = l_rc
TABLES
RETURN_VALUES = t_DDSHRETVAL
IF l_rc = 0.
LOOP AT t_DDSHRETVAL INTO w_DDSHRETVAL.
CASE w_DDSHRETVAL-fieldname.
WHEN 'SNNTX'. "W_SNNTX = w_DDSHRETVAL-fieldval.
dyname = sy-repid.
dynumb = sy-dynnr.
dynpfields-fieldname = 'W_SNNTX'.
dynpfields-fieldvalue = w_DDSHRETVAL-fieldval.
APPEND dynpfields.
WHEN 'SBRTX'. "W_SBRTX = w_DDSHRETVAL-fieldval.
dyname = sy-repid.
dynumb = sy-dynnr.
dynpfields-fieldname = 'W_SBRTX'.
dynpfields-fieldvalue = w_DDSHRETVAL-fieldval.
APPEND dynpfields.
WHEN 'SBSTX'. "W_SBSTX = w_DDSHRETVAL-fieldval.
dyname = sy-repid.
dynumb = sy-dynnr.
dynpfields-fieldname = 'W_SBSTX'.
dynpfields-fieldvalue = w_DDSHRETVAL-fieldval.
APPEND dynpfields.
WHEN 'ENPTX'. "W_ENPTX = w_DDSHRETVAL-fieldval.
dyname = sy-repid.
dynumb = sy-dynnr.
dynpfields-fieldname = 'W_ENPTX'.
dynpfields-fieldvalue = w_DDSHRETVAL-fieldval.
APPEND dynpfields.
WHEN 'PLANT_CODE'. "W_ENPTX = w_DDSHRETVAL-fieldval.
dyname = sy-repid.
dynumb = sy-dynnr.
dynpfields-fieldname = 'W_WERKS'.
dynpfields-fieldvalue = w_DDSHRETVAL-fieldval.
APPEND dynpfields.
ENDCASE.
ENDLOOP.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = dyname
dynumb = dynumb
TABLES
dynpfields = dynpfields.
ENDIF.

How ti disable screen fields in Module pool

hi
How to change screen fields to DISPLAY MODE aftr clicking on a particular pushbutton in Module pool prg .
regards
chetan
Edited by: chetan teli on Jul 29, 2008 1:04 PM

hiiii
use following code for disabling field
IF p_rad2 IS INITIAL .
    LOOP AT SCREEN.
      IF screen-name CS 'p_docno'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.                           " IF screen-name CS 'p_docno'.
    ENDLOOP.                           " LOOP AT SCREEN.
ELSE.
    LOOP AT SCREEN .
      IF screen-name CS 'p_docno'.
        screen-active = 1.
        screen-input = 1.
        MODIFY SCREEN.
      ENDIF.                           " IF screen-name CS 'p_docno'.
    ENDLOOP.                           " LOOP AT SCREEN .
ENDIF.                               " IF p_rad2 IS INITIAL .
regards
twinkal

How to do ICON_EXPAND and ICON_COLLAPSE input fields in module pool screen?

hi frnds.
My problem is in module pool screen how to do ICON_EXPAND and ICON_COLLAPSE input fields in module pool screen?And how to do GUI STATUS and GUI TITLE? IN SE80.
ITS URGENT.POINTS WILL BE REWADED.THANKS IN ADVANCE.

Hi,
Go through this thread.
[expand and collapse|expand and collapse]
Cheers,
Simha.

Problem with I/O field in module pool

hi experts,
        I am displaying some text in I/O field in module pool screen. I am giving the attributes of I/O field as "output only" type and no input. Initially the input was not enabled for it, only it should be in display mode. Once i click on 'CHANGE' pushbutton then only the input should be enabled and it should be in change mode.will u tell me how to do it programatically.

HI,
In PAI of that screen..
when the sy-ucom is 'Change' then use the Loop at screen--Endloop to modify the attributes value.
example..
LOOP AT screen
      CASE screen-name.
       WHEN 'Fieldname.
          screen-input = 0.
          screen-active = 0.
         MODIFY screen.
     ENDCASE.
Edited by: avinash kodarapu on Dec 10, 2008 12:16 PM

Change Dialog Screen Field Position Dynamically

Hi
Can I change screen field position at runtime?
I saw that in the SCREEN Structure there aren't any fields to set the position. Is there a Function Module or a Class to do that?
Thanks,
Eyal

Hi Eyal,
Good Question.
1. R/3 abap does not allow this facility.
2. However, if we use a custom control /container,
 then there one property LEFT, TOP,
which is avaialbe in the OO hierarchy.
CL_GUI_OBJECT 1
CL_GUI_CONTROL 2 <----
... CL_GUI_ALV_GRID, ETC. ETC.
3. This 2 has got this property
4. we can use like this.
CALL METHOD grid->set_top
 EXPORTING
 top = 1500
 EXCEPTIONS
 cntl_error = 1
 OTHERS = 2.
5. I tried but i don't know why its not working.
regards,
amit m.

How to delete the row in table control with respect to one field in module pool programming?

Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MS

HI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
     WHEN 'DELETE'.
        LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
            APPEND LS_SOURCE TO LT_RESTORE.
            DELETE TABLE LT_SOURCE FROM LS_SOURCE.
            SOURCE-LINES = SOURCE-LINES - 1.
        ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field.

F1 help on a field in module pool programming

I want to create f1 help on a field in module pool programming. How to use POH event. where should i write the help documentation. Before using this f1 help on a field i have to set some properties on GUI interface Editor. Please clearly mention the steps i have to follow.

PROCESS ON HELP-REQUEST.
FIELD P_LFA1 MODULE HELP_F1_LIFNR.
MODULE HELP_F1_LIFNR INPUT.
PERFORM SHOW_HELP_F1 USING 'ZFAG_DOC1'.
ENDMODULE. " help_f1_lifnr INPUT
FORM SHOW_HELP_F1 USING P_OBJECT.
Dati testo help
DATA: T_LINE LIKE TLINE OCCURS 0,
XHEAD LIKE THEAD,
HELP_INFO LIKE HELP_INFO,
TEXC LIKE SY-UCOMM OCCURS 0,
V_OBJECT LIKE DOKHL-OBJECT.
Costante
DATA: PREF_SIMG(4) VALUE 'SIMG',
DOCID_HY LIKE DOKHL-ID VALUE 'HY'.
Testo
CONCATENATE PREF_SIMG P_OBJECT INTO V_OBJECT.
Estrazione testo
CALL FUNCTION 'DOCU_GET_FOR_F1HELP'
EXPORTING
ID = DOCID_HY
LANGU = SY-LANGU
OBJECT = V_OBJECT
IMPORTING
HEAD = XHEAD
TABLES
LINE = T_LINE
EXCEPTIONS
RET_CODE = 1
OTHERS = 2.
CASE SY-SUBRC .
WHEN 0.
Visualizzazione testo
GET CURSOR FIELD HELP_INFO-DYNPROFLD.
HELP_INFO-DOCUID = DOCID_HY.
HELP_INFO-DOCUOBJECT = V_OBJECT.
HELP_INFO-SPRAS = SY-LANGU.
HELP_INFO-PROGRAM = SY-REPID.
HELP_INFO-DYNPRO = SY-DYNNR.
HELP_INFO-DYNPPROG = SY-REPID.
HELP_INFO-PFKEY = SY-PFKEY.
HELP_INFO-FIELDNAME = HELP_INFO-DYNPROFLD.
CALL FUNCTION 'HELP_DOCULINES_SHOW'
EXPORTING
HELP_INFOS = HELP_INFO
OVERLAY_HEADER = XHEAD
TABLES
EXCLUDEFUN = TEXC
HELPLINES = T_LINE.
WHEN OTHERS. MESSAGE S720(SH).
ENDCASE.
ENDFORM. " SHOW_HELP_F1

Customer Control in screen painter in Module pool - work like container?

Customer Control option in screen painter in Module pool - work like container?
is it true? How?
Is like any work area or what?
what is the excat use of that option?
regards.

Hello,
In screen painter ,custom control is used to define the control area on the screen.Just click on that and make your own container area.When you create an ALV grid or TEXT EDITOR or any other control,it will get attached to the screen in that area through the custom container.
Name the container area as say 'CONTAINER'.(in capitals.)
When you actually create the custom conatiner programatically,you should give the container area name.ie.
Data : cont type ref to cl_gui_custom_container.
Create object cont
exporting
parent = 'CONTAINER'.
Now,this container that you created-cont is attached to the screen in the area defined by CONTAINER.
Regards,
Beejal
**Reward if this helps

Adding a screen element in Module pool

Hi Experts,
How to add a screen element in module pool programming?
Thanks,
Sudha...........

Hi sudha ,
To add screen elements in you module pool programming ,
i > Go the layout of the screen for which you want to have elements .
ii> Drag and drop the available elements from the left hand side .
iii> Be sure to have a name a name of the data elements that you have inserted .
iv>Check any dataelement is't showing red in color as red color signifies error .
v> Make sure to save and activate the layout.
Hope this would be clear .
Thanks
Lokesh

Regarding screen flow in MODULE POOL

Hi everyone,
my requirement is to cretae a module pool program. In between a program is submitted VIA a selection screen. That selection screen contains PUSH BUTTONS. If any push button is clicked one of the dialog screens of the module pool program should be called. Can any one tell me how can this be done.
Thanks in advance.
Regards,
Y.Gautham

write a Module in PAI of ur screen and call which ever screen u want to call or leave.
for e.g -
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
module USER_COMMAND_0100 input.
case ok_code.
when 'ENTER'.
clear ok_code.
leave to screen 200.
endcase.
endmodule. " USER_COMMAND_0100 INPUT

Date field in module pool

hi all,
i want to have date field in module pool with F4 help. m keeping format as DATS. but still its not taking F4 help for taking date from calender...how shud i do it.

Call this FM -
CALL FUNCTION 'F4_DATE'
       EXPORTING
            DATE_FOR_FIRST_MONTH = DATE
            DISPLAY              = HELPDISP
       IMPORTING
            SELECT_DATE          = DATE
       EXCEPTIONS
            OTHERS               = 4.
Regards,
Amit
Reward all helpful replies.

Difference between screen painter and module pool

Hi guys,
what's the difference between SCREEN PAINTER and MODULE POOL ....
can anyone plz give brief description ...
regards
venu

hi ,
As its said by many colleagues in SDN , there are not very major differences between Modulepools and screen painter .
The few differences are :
1) Module pool is nothing but a pool ( series ) of screens . and Screen painter ( SE51 ) is a tool used for creating/designing screens .
2) While creating a modulepool you even need to create a transaction and assign this module pool program else the mpool program doesnt work . I think this is place we can say they are different .
3) If at all you create a screen in screen painter ( SE51 ) , that doesnot function by its own , you need to assign it to any of the executable programs or modulepool programs .Here is again a difference .
Regards,
Ranjita ..
Message was edited by:
Ranjita Kar

Cursor position on screen data in module pool programming(urgent)

Hi all,
I developed a module pool program which will save the data after scanning the barcode data.
In my program screen 100 is there which contains field 2dbar. scanned data is comming to 2dbar field.
we r doing scan 4 times.once for vendor number,once for material no. like this.
After 1st scan, vendor number will come to field 2dbar.
Then I developed logic to put comma after each scanned data come to this field 2dbar.
MODULE put_comma INPUT.
CASE OK_CODE.
when ''.
move 2dbar to 2dbar1.
clear 2dbar.
concatenate 2dbar1 ',' into 2dbar2.
*replace 2dbar with 2dbar2 into 2dbar.
move 2dbar2 to 2dbar.
*write 2dbar2 to 2dbar.
condense 2dbar no-gaps.
*move '' to 2dbar.
*set cursor field 2dbar offset 5.
*write
ENDCASE.
ENDMODULE. " put_comma INPUT
By above logic, comma comes to the starting position of 2dbar after each scan. i.e cursor position is coming to the starting position of screen field 2dbar.
Now I need to move the cursor position after the comma position on 2dbar after each scan.
after 1st scan, 2dbar contains
vmotorola
then my logic puts a comma when u put enter on screen 100.
now 2dbar contains
vmotorola,
i should get the cursor position after the comma.but i am getting cursor position before 'v'.so how to move this cursor position beyond comma after each scan.
I added set cursor command but it is not working.plz
What is the logic, I need to put in PAI to move the cursor on selection screen.
Already the logic I have mentioned. with that logic, I can put comma.now I need to add cursor movement logic to move the cursoron on screen field 2dbar.
Plz reply me as it is urgent.
Thanks in advance.
Regards
pabitra

CASE OK_CODE.
when ''.
move 2dbar to 2dbar1.
clear 2dbar.
concatenate 2dbar1 ',' into 2dbar2.
move 2dbar2 to 2dbar.
condense 2dbar no-gaps.
len = strlen ( 2dbar ).
len = len - 1.
set cursor field 2dbar offset len.
ENDCASE.
ENDMODULE. " put_comma INPUT

Problem in Screen field position ( Module pool )

Similar Messages

Maybe you are looking for