Problem in script pages

Hi
My script contains 2 windows namely Header window & Main window. I am getting output corectly.
      But the problem is getting 2 pages for shipment no. 1649 & 3 pages for shipment no 1609, even though only 1 record in Main window.
      Allignment also vary for 1 shipment no to another shipment.
   Its very urgent. Plz help me.
Reward points if helpful.

i think in your print program you ar using any write_form with the window name SUMMARY  but in your script  ZSAP_CHQ_LAY_LS you dint create the SUMMARY window. so create that in script or search in print prog and comment that write form which contains window = 'SUMMARY'
regards
shiba dutta

Similar Messages

  • I have a problem with searching page, whenever i try to open any page a blank paper cums appear only written custom search google in English

    i have a problem with searching page, whenever i try to open any page a blank paper cums appear only written custom search by google this one is not such as my google home page
    == This happened ==
    Not sure how often
    == i use to search any page like movies or etc

    Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
    So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
    If someone knows how to fix this and make firefox launch normally, please reply! Thank you

  • Problem with "Next Page" And "Zoom" in CrystalReportViewer With VS 2010

    Hello,
    i am using crystal report v 13 sp1 with visual studio 2010,
    As mebtioned, the next page and the zoom is not working in my report, whiwh has as data source "Stored Procedure"
    This is my code, and i think it's correct, i was using this code in previous versions of crystal report (cr10) and it worked fine,
    When i used the Data set , the next page and zoom worked fine, but with stored procedure it doesn't work,
    Note: when i open the Tree of Data on the left, then click on the next page or the zoom, it become funtional, it's very weird,
    protected void *Page_Init*(object sender, EventArgs e)
    if (!IsPostBack)
    reportDocument = (ReportDocument)this.Page.Session ["_reportDocument"];
    if (reportDocument != null)
    string rptFile = reportDocument.FileName.Split('
    ', '/').Last();
    LoadReportRessource(reportDocument);
    TableLogOnInfo log = new TableLogOnInfo();
    ConnectionStringSettings conn = WebConfigurationManager.ConnectionStrings[0]; //la premiere connectionstring
    SqlConnectionStringBuilder SConn = new SqlConnectionStringBuilder(conn.ConnectionString);
    log.ConnectionInfo.ServerName = SConn.DataSource;
    log.ConnectionInfo.DatabaseName = SConn.InitialCatalog;
    log.ConnectionInfo.UserID = SConn.UserID;
    log.ConnectionInfo.Password = SConn.Password;
    log.ConnectionInfo.Type = ConnectionInfoType.SQL;
    for (int i = 0; i < reportDocument.Database.Tables.Count; i++)
    reportDocument.Database.Tables.ApplyLogOnInfo(log);
    for (int i = 0; i < CrystalReportViewer1.LogOnInfo.Count; i++)
    CrystalReportViewer1.LogOnInfo.ConnectionInfo = log.ConnectionInfo;
    CrystalReportViewer1.ParameterFieldInfo = (ParameterFields)this.Page.Session ["_paramFields"];
    CrystalReportViewer1.ReportSource = reportDocument;
    CrystalReportViewer1.DataBind();
    CrystalReportViewer1.ShowFirstPage();
    else
    CrystalReportViewer1.ReportSource = (ReportDocument)this.Page.Session ["_reportDocument"] ;
    Edited by: Soumaya on Sep 7, 2011 6:16 PM

    @Don:
    Sorry, but i donno what do you mean by "what is the App Pool running in 32 or 64 bit?",
    i am running the application locally, ( the IIS is installed locally ),
    as i told you, my OS is 64bit,
    And yes i tried a very simple report, with just one field , and the "next button" is also not working,
    Its only not working with stored procedure, in the others methods ( push or pull method is working fine)
    i think its a problem in refreshing page, because when i open the tree on the left, then click on next page or zoom, its works fine
    @Ludek:
    i changed my code as below, and it doesn't solve my problem:
            ReportDocument reportDocument;
            protected void Page_Init(object sender, EventArgs e)
                if (!IsPostBack)
                    reportDocument = (ReportDocument)this.Page.Session["_reportDocument"];
                    if (reportDocument != null)
                        string rptFile = reportDocument.FileName.Split('
    ', '/').Last();
                            TableLogOnInfo log = new TableLogOnInfo();
                            ConnectionStringSettings conn = WebConfigurationManager.ConnectionStrings[0];
                            SqlConnectionStringBuilder SConn = new SqlConnectionStringBuilder(conn.ConnectionString);
                            log.ConnectionInfo.ServerName = SConn.DataSource;
                            log.ConnectionInfo.DatabaseName = SConn.InitialCatalog;
                            log.ConnectionInfo.UserID = SConn.UserID;
                            log.ConnectionInfo.Password = SConn.Password;
                            log.ConnectionInfo.Type = ConnectionInfoType.SQL;
                            for (int i = 0; i < reportDocument.Database.Tables.Count; i++)
                                reportDocument.Database.Tables<i>.ApplyLogOnInfo(log);
                        this.Page.Session["_reportDocument"] = reportDocument;
                        CrystalReportViewer1.ParameterFieldInfo = (ParameterFields)this.Page.Session["_paramFields"];
                        CrystalReportViewer1.ReportSource = reportDocument;
                        CrystalReportViewer1.ShowFirstPage();
                else
                    CrystalReportViewer1.ReportSource = this.Page.Session["_reportDocument"];
    Edited by: Soumaya on Sep 8, 2011 10:39 AM

  • A lot of tabs loads and tells me there was a problem loading the page. How can I stop all the tabs loading because ist slows down Firefox.

    When I open Firefox, a lot of tabs try to open at the same time. They all say Problem loading the page. It happened after I tried to download a owners manual for Harley Davidson motor cycles. How can I stop all but one tab from opening.

    This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
    See:
    * http://kb.mozillazine.org/Session_Restore

  • I'm having a problem saving a pages document as another format, like a Word document or PDF file.  I've never had this problem in the past.  Please help me!  I need to have this fixed a.s.a.p.

    Hello everyone,
    I'm currently having a problem saving a Pages document as another format, such as a Word document or PDF file.  I've never had this problem before with Pages.  Please help me!  I need to have this completed a.s.a.p.
    Thanks,
    Amy

    To save as a PDF, you do that from Print
    To save as Wrod format, you export
    Allan

  • Problem in script format

    hi,
    i am having problem in script , the problem is
    s.no|    descriptio                           |   UOM                      |          Qty                   |             Rate           |          AMT            |
    01     aaaaaaaaaaaaaaaaaaaaa       11.01                             17.28                     170000000               2400000
    this is fine but when the 1st column is shot other also get affected.
    s.no|    descriptio                           |   UOM                      |          Qty                   |             Rate           |          AMT            |
    01     aa       11.01                             17.28                     170000000               2400000
    and i cannot draw vertical line here .what is the solution for this.
    Edited by: jaihind on Mar 6, 2010 12:21 PM
    hi,
    problem is if the description field is long then other coloum are comming fine but if description caloumn is small then other also get affected and its comes towards left .
    Edited by: jaihind on Mar 6, 2010 12:22 PM

    Hi
    For this u can resolve by using the Formatting characters ......
    This is your layout ..
    s.no| descriptio | UOM | Qty | Rate | AMT |
    01 aaaaaaaaaaaaaaaaaaaaa 11.01 17.28 170000000 2400000
    Assume that   your field names like  
    s.no      |  description  |    UOM      |    Qty      |      Rate      |         AMT       |
    &sno&      &desc&         &UOM&       &Qty&         &rate&         &AMT&
    asseme that  length of these fields(in characters) as per your requirement will be ...
    s.no      |  description  |    UOM      |    Qty      |      Rate      |         AMT       |
    8                  15                  5                8                 10                  15
    For these use formatting characters    like   ...
                  s.no      |  description      |    UOM      |    Qty      |      Rate      |         AMT       |
    1stLine  &sno& ,,  &desc+0(15)&,,  &UOM&       &Qty&        &rate&         &AMT&
    2ndline                 &desc+15(15)&     
    &desc+0(15)&  -  it will print  first 15 characters from 0th position
    &desc+15(15)&- From 15th position it will print 15 characters ..
    Hope you resolve your issue
    Let me know if Any concerns,.......

  • Problem printing flash pages - black box

    Hello,
    I am trying to help someone else in our office who is having
    a problem with swf pages converted from PDF documents. The PDFs
    were made from either Quark or Indesign documents. The pages
    contain graphics, some of which are bitmap (one-color) images. All
    looks good on screen when displayed in a browser, but when printed
    the graphics become black boxes, as though a black background were
    added to the image. Does anyone know why this is happening or can
    someone suggest a workaround? We have thousands of pages that need
    to print from our user's browsers but find we are plagued with this
    issue. The weird thing is, I found that some of the bitmap images
    were fine while most of them were bad. I used PitStop professional
    to examine the PDFs and there is nothing different about the images
    there.
    Regards,
    Len Swierski

    Anybody figure this out???
    We're having the same problem too. All of our flash paper
    documents are being converted from PDFs that orignally came from
    Quark or Indesign. The art department figured out that they could
    fix the problem by converting the bitmaps to grayscale. (Our pages
    are black and white anyway) We also found out that different
    versions of acrobat could fix the probelm. Somtimes version 7 would
    work and sometimes version 4 would work. A lot of trial and error
    and wasting paper.

  • Problems with error-page in web.xml and page caching

    Having a few problems with error pages and web.xml with browsers caching the error pages and strange errors coming out of weblogic.servlet.intenal.WebAppServletContext
    I'm trying to set a web app up so that all http errors and all exceptions are routed thruogh predefined resources. For now, I'm simply send 400 errors to 400.html and the ServletException, IOException and RuntimeException to respective html pages.
    What I'm finding is that the error codes work fine but the exceptions are only be routed to the correct error page for the first call to the servlet after server restart.
    So for example, I have my servlet throwing a ServletException as a test case. The weblogic server log shows that ServletException is thrown, and the correct error page for ServletExceptions is shown.
    If I change the Servlet code to throw IOException in place of SevletException, the weblogic.log shows that IOExceptyion is being thrown (so the servlet has deployed successfully), however the Servletxception error page is shown on the browser.
    I'm using IE6 and I've changed the setting such that a new page is requested every time using the tools-internet options-temp internet files-settings option to "check for new versions of stored pages: Every visit to the page".
    Despite this, the servlet exception error page still appears.
    If you clear the cache from the temp intenet files->delete files IE option, the correct errror page will be shown so it appears that the browser cache is being used after all.
    everytime I delete the temp intenet files I get the correct error page on the first request after but then not after that.
    I have implemented the service method for this test to throw the exceptions - does this make a differecne?
    As a test, I have moved the imlpementation to the doGet method instead bu I now get a strange eror from weblogic comlpaining about an arrayOutOfBoundsException because eror codes in the web.xml are not supported! - see error above.
    Any help is appreciated

    After further investigation: -
    There are no problems with error pages based on error codes, only error exceptions.
    As a test case, I have a service method in a servlet throwing either one of the three exception types that servlets can throw (Runtime, Servlet & IO) the following rules apply. The exception to be thrown is hardcoded and is changed and the web app rebuilt each time. The correct web.xml has been deployed to the app server (checked through console). the webapp is being redeployed correctly - this can be seen in the weblogic log, where the correct exception is reported.
    I am using WLS 8.1, Servlet 2.3, JDK 1.4.1_02
    In all cases, the weblogic log reports that the servlet is throwing the exception as expected.
    Despite having set error-page for exception javax.servlet.ServletException, the exceptions are diverted to the error page that has been set up for http error code 500
    The error page for ServletException is therefore never reached.
    I have the browser set to request pages every time it is asked.
    Once the servlet has thrown an IOException, the only way to get the browser to report an IO or Runtime exception error-page is to clear the browser cache. Restarting the server has no effect.
    Once the servlet has responded with ANY exception, it is not possible to get it to report a ServletException (which is incorrectly reported as a 500 anyway) unless the cache is cleared. Restarting the server has no effect.
    In the case where the servlet throws ServletException, it has no root exception. The servlet 2.3 spec states that if ServletException is thrown but cannot be found in the error pages, the root excpetion will be extracted and the error page list traversed again. Knowing that the RuntimeException error page is correct shown when RuntimeException is throwm, I have nested this inside the ServletException, however error page for http error 500 is still shown.
    I don't believe this is a WLS 8.1 problem, as the console shows that the correct exception is thrown each time. this is backed up by the fact that the correct exception page is thrown when the cache is cleared regardless of what exception was previousdly thrown by the servlet. This excludes ServletException which is always incorrectly thrown as a 500.

  • Error "problem loading more pages"

    Using XP SP3, IE 8 and Acrobat Reader X, I have been trying to look at a document identified by a website as .pdf.
    I see what appears to be the first page of that document - ie it makes perfect sense in the context of the website - but at the foot of the first page a message appears reading:
    "Whoops! There is a problem loading more pages. Retrying..."
    and nothing more happens.
    On another PC, using XP SP3, IE 7, and Acrobat Reader XI, I cannot even get that first page up - after clicking on the link to the document, nothing happens,
    Can anyone guess whether this is a problem with Acrobat Reader or IE? and if so, what might be done to fix it?

    Your link is on Google Docs, which uses its own PDF viewer.  I can see all pages with no problems.
    If you use the download button on top of the page, you can download a perfect PDF to your local disk.
    If that Wordpress page is yours, I would suggest that you upload the PDF to somewhere where it can be viewed with the browser's PDF plugin, not with the Google Docs PDF viewer.

  • Problem in getting Page nos in SFs

    I have a problem in getting Page nos in SFs. My problem is that, I want to print multiple docs ie SELECT-OPTION case.
    Here each doc has N no of pages. I want to print Page 1 of N for each doc. I used SFSY-PAGE / SFSY-FORMPAGES but its giving total no of pages. I want my page no has to reset for each doc.
    Ex.. DOC 1 .... Page 1 of 3, 2 of 3 etc.
    DOC2 .... Page 1 of 5 etc.
    DOC3 .... Page 1 of 1 etc.
    but its printing 1 of 9, 2 of 9 etc.
    Plz help me in this reg.
    Thanx in advance.

    Hi Sachin,
    Thanx for the reply but i think that u did not get my question correctly.
    I said that if no of pages is greater than 10, then upto 9th page it is coming as Page 1 of *,..Page 2 of *, then after 10 the page, it is coming right.
    For e.g. if the no of pages is 15, then it is coming as Page 1 of *, Page 2 of *....Page 9 of *, but from the 10th page, it is coming as Page 10 of 15 which is the correct way.

  • Problems Uploading a Pages file in html format including pictures to web pa

    I have problems uploading a Pages file in html format to a web page.
    The files itself is downloaded but the images are not. How can I upload a page file in html including the pictures or illustrations?

    I just bought a macbook as well as the iwork software. I am having a few problems. I am a student and when I try to print out documents (originally word documents) it puts them automatically into textedit instead of pages. Also, the pages get all screwed up, things are missing, etc. How do I make pages my default and do i need to export? import? or do something so that these documents show up perfectly in pages?
    A second questions- When i try to print out slideshows in keynote (originally from powerpoint) the handouts print on the little edge of the paper horizontally rather than the long way. I am hoping these are easy adjustments.
    I would appreciate any help anyone can give me.
    Thank you!

  • How can I fix this problem with exporting Pages files?

    Hello,
    I'm having problems with exporting Pages files to Word or PDF (I haven't tried the other formats). Whenever I try to export the Page file, I get one message like this: "The document "XXXXXXX" could not be exported as "YYYYYYY". This problem started after the last Pages update, before that it was working fine. I restarted the computer, updated the OS, but the problem hasn't been solved.
    Does anyone know how to fix this problem?
    Thank you in advance!
    Best regards,
    Filipe

    Computers are made of parts made by humans and assembled by humans of materials that are not perfect.
    For example, a display cable that was accidentally pinched during assembly would pass quality control testing with flying colors and would not fail until the lid had been opened and closed several times.
    Likewise a display might not fail until powered on and off a few hundred times.

  • 502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

    I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
    502 - Web server received an invalid response while acting as a gateway or proxy server.
    There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

    When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
    ARR version installed is 3.0
    To throw more light on the configuration:
    Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
    All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
    Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
    Edge : Windows 2012 with Lync 2012 Std - 1 No 
    (192.168.11.101 DMZ) in workgroup
    ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
    Certificate : Internal Domain root CA for internal and External (Digicert).
    Internal Network : 192.168.10.x /24
    External Network (DMZ) : 192.168.11.x /24
    Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
    Edge has : sip.domain.com, webconf.domain.com, av.domain.com
    IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
    Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
    Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
    Internal AD Integrated DNS pointing Front-end
    Type of Record FQDN
    IP Description 
    A sip.domain.com
    192.168.10.100 Address internal Front End  or Director for internal network clients 
    A admin.domain.com
    192.168.10.100 URL Administration pool
    A DialIn.domain.com
    192.168.10.100 URL Access to Dial In 
    A meet.domain.com
    192.168.10.100 URL of Web services meeting
    A lyncdiscoverinternal.domain.com
    192.168.10.100 Register for Lync AutoDiscover service to internal users
    A lyncdiscover.domain.com
    192.168.10.100 Register for Lync AutoDiscover service to external users  
    SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
    sip.domain.com Record pointer services to internal customer connections using TLS 
    External DNS pointing Edge & Proxy
    Type of Record FQDN
    IP Endpoint
    A sip.domain.com
    x.x.x.100 Edge
    A webconf.domain.com
    x.x.x.100 Edge
    A av.domain.com
    x.x.x.100 Edge
    SRV _sip._tls.domain.com
    sip.domain.com: 443 Edge
    SRV _sipfederationtls._tcp.domain.com
    sip.domain.com:5061 Edge
    A Meet.domain.com
    x.x.x.110 Reverse Proxy
    A Dialin.domain.com
    x.x.x.110 Reverse Proxy
    A lyncdiscover.domain.com
    x.x.x.110 Reverse Proxy
    A lyncweb.domain.com
    x.x.x.110 Reverse Proxy
    In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
    In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
    The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
    a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
    Certificate was installed properly.
    b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
    HTTP Response Headers:
    Content-Length: 1477
    Content-Type: text/html
    Date: Wed, 14 May 2014 10:03:40 GMT
    Server: Microsoft-IIS/8.0
    Elapsed Time: 1300 ms.
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

  • Problem with control page in menu

    hello my name is cris and my problem is that page of singlelevelmenu does not make
    scroll and exceeds the size that I have defined of the portal that is 800X600.
    i like to know to me as the portal define when a level finishes and begins following

    Add the bold...
    nav a:hover, nav a:focus, nav a:active {
        background-color: #993300;
        font-family: "PT Sans", Arial, sans-serif;

  • I can't navigate anywhere! it says there's a problem loading my page or the url is wrong

    for example...i try type in yahoo.com... and get the page briefly..then this message "Sorry. We can't find "http://www.yahoo.com/"
    There was a problem loading your page. Try retyping the URL in the browser address bar above or, visiting a related link below." this happens with each site i visit..or try to visit. it pops up briefly then that error message. what can i do? I can't do anything!!

    http://support.apple.com/kb/ts3694#error29
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

Maybe you are looking for

  • Is there a maximum album cover size in Music app?

    Is there a maximum album cover artwork size in the Music app? I've noticed that some albums - that I've scanned the covers for - will display the cover in iTunes but not on my iPhone, so I'm wondering whether there's a maximum filesize or maximum dim

  • In need of CS3

    My hardrive recently crashed and I no longer have the CS3 Design Standard software to reinstall on my computer...I have my serial/license number, I just need the replacement dvd.  Since Adobe is onto CS4 I can't order a replacement through them. Does

  • XMP metadata in active indd document

    Is there any possibility to add XMP metadata in the active InDesign document using scripting? Thanks SS

  • IWeb Blog - How do people leave comments?

    Hi - I have made a site with iWeb and added a blog. Even though I have 'ticked' the box to allow comments I can't see where or how anyone can leave any? Can anyone help me with what I am doing or not doing? www.TheEmotionalBaggageDiet.com In Gratitud

  • Running a  oracle report 6i  with maximized window state

    hi how can i run a report with maximized window state. sincerely rajesh