Problem in SD module

Hi experts,
I know nothing about SD module. But given a BW extraction and reporting work from the SD module data.
Can you please guide me how to go about it ?
Thanks

Hi,
SD Process Flow
the sales documents you create are individual documents but they can also form part of a chain of inter-related documents. For example, you may record a customers telephone inquiry in the system. The customer next requests a quotation, which you then create by referring to the inquiry. The customer later places an order on the basis of the quotation and you create a sales order with reference to the quotation. You ship the goods and bill the customer. After delivery of the goods, the customer claims credit for some damaged goods and you create a free-of-charge delivery with reference to the sales order. The entire chain of documents the inquiry, the quotation, the sales order, the delivery, the invoice, and the subsequent delivery free of charge creates a document flow or history. The flow of data from one document into another reduces manual activity and makes problem resolution easier. Inquiry and quotation management in the Sales Information System help you to plan and control your sales.
Transaction Codes:
Inquiry - VA11/VA12/VA13
Quotation - VA21/VA22/VA23
Sales Order - VA01/VA02/VA03
Delivery - VL01N/VL02N/VL03N
Billing/Invoicing - VF01/VF02/VF03
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCSD/CAARCSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_SD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSD/BCBMTWFMSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOLISPLN/LOLISPLN.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/92/df293581dc1f79e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/dd/55f33e545a11d1a7020000e829fd11/frameset.htm
SD data is extracted using LO extractors.
LO Cockpit (Use transaction LBWE)
/people/vikash.agrawal/blog/2006/12/18/one-stop-shop-for-all-your-lo-cockpit-needs
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/21406 [original link is broken] [original link is broken]
/people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
To understand LO extraction go through these weblogs by Roberto
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
Thanks,
JituK

Similar Messages

Problem with develop module

I have LR 5.4 running on a mac OS 10.7.5. I am having problems with the software locking up in the Develop module. Sometimes a new image won't open and the preview screen stays black. I go back to the Library module and try to reneter the Develop module and get an error message saying there was an error trying to open the module. The entire LR screen is gray. I have to quit LR and restart the software to continue. I downloaded my software from Abobe and I was wondering if I can download a new version again and use my same serial number to reinstall the software.

Hi Rodney,
No custom print templates and this is a relatively new problem. It just
started about a week ago. I have been using the software steady for months
now. It did it once or twice last week but this weekend and today it has done
it about six times so it seems the problem is getting worse. That¹s why I
think the software may have been corrupted. I didn¹t keep a copy of the
software I downloaded so I can¹t reinstall. That¹s why I was wondering if I
could download it again and use the same serial number as before. I have only
loaded the latest version on my desktop. I also have LR 4 still installed on
my laptop and desktop. I have a big project to complete and this is really
slowing me down.
Michael
Problem with develop module
created by Andrew Rodney <https://forums.adobe.com/people/thedigitaldog> in
Photoshop Lightroom - View the full discussion
<https://forums.adobe.com/message/6445126#6445126>
Do you have any custom print templates? That might be the case, it was an
issue at one time. Delete them and try using one of the default presets.
Crash?
Please note that the Adobe Forums do not accept email attachments. If you want
to embed a screen image in your message please visit the thread in the forum
to embed the image at https://forums.adobe.com/message/6445126#6445126 Replies
to this message go to everyone subscribed to this thread, not directly to the
person who posted the message. To post a reply, either reply to this email or
visit the message page: To
unsubscribe from this thread, please visit the message page at
. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Photoshop Lightroom by email
<mailto:[email protected]> or
at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
&container=3316> For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
>

[Solved] Very strange problem with kernel-modules & NTFS write speed

I was getting very low copying speed when copying files to NTFS partitions, around 8-10 MB. But, when I commented the modules section in /etc/rc.conf file, the speed dramatically improved upto 5-6x. Now, it also created some problems for me. Like vboxdrv is required by Virtualbox to function & cpufreq_ondemand is required by my AMD processor. Please help me & tell what I'm doing wrong. I'm also posting the output of my /etc/rc.conf file here
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged.
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
# VERBOSE: Verbose level (from 1 to 8). man 3 syslog for level info
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="Asia/Kolkata"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
VERBOSE="3"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
#MOD_AUTOLOAD="yes"
#MODULES=(microcode powernow-k8 cpufreq_ondemand cpufreq_powersave vboxdrv vboxnetflt )
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="AX-64"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=192.168.1.2
netmask=255.255.255.0
gateway=192.168.1.1
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock @acpid syslog-ng network netfs dkms_autoinstaller sshd @crond @alsa dbus hal gdm @cpufreq @cpu)
Last edited by tarun.hellknight (2012-02-04 16:55:39)

Sorry for replying late.. Was very busy.. So, the thing is that I disabled every module & loaded only microcode & powernow-k8 in /etc/rc.local. Now, I'm getting good speed while copying data but the problem is that the processor is running & full speed i.e. 3.0 GHz. I checked it via cat /proc/cpuinfo. Also, there is a message in the bootime, that i'm posting here..
grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory
If it helps, here's the output of cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 5
model name : AMD Athlon(tm) II X4 640 Processor
stepping : 3
microcode : 0x10000b6
cpu MHz : 3000.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
bogomips : 6002.74
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
Last edited by tarun.hellknight (2012-02-01 18:49:55)

Specific Problem with Library Module 1:1 Preview Loading

Hi everyone. I've spent hours searching Google & forums for specific tips to try but I've found nothing that solved my problem. I have a very specific problem loading 1:1 previews in Lightroom 3.3 while zoomed to 1:1.
When I initially import a shoot (usually 3000 to 6000 images), I always render 1:1 previews during import. My understanding is that this activity writes full-sized previews to the "Previews" folder, but I also have observed that .DAT files are created in the "Camera Raw Cache" folder. I have my Lightroom Previews folder and my Adobe Camera Raw Cache folder on the **same** solid-state hard disk, which is dedicated to Lightroom.
When I browse these newly-imported images in the Library module in Loupe view at 1:1 zoom, it's very zippy and fast to switch between images. The images load without any message at a lower resolution, and then "snap" to full resolution after 0.25 to 0.5 seconds. No "Loading" message appears.
However, once the previews have "sat around for a while", even if they are still supposedly available in the Previews folder, loading the image at 1:1 in Loupe as described takes 3-5 seconds. Shortly after going to an image, the message "Loading..." is displayed (it doesn't say where from), and 3-5 seconds later, the full res image appears.
This has nothing to do with changes to image settings requiring re-rendering of the preview. These are images that I've imported but haven't browsed in a while. I know that the previews are valid, because I can go to "Library > Previews > Render 1:1 Previews", and the task will complete within 20 or 30 seconds without re-rendering any photos after examining them and apparently finding that there are still valid 1:1 previews for all 4000 of them. After doing this "re-render," the slow loading behavior is the same as before, because the re-render process always completes without actually updating the previews that it found are already there and presumably decided were still valid. Discarding previews by "Library > Previews > Discard 1:1 Previews" and then trying to re-render them also does nothing, because LR3 apparently doesn't immediately delete the discarded previews, so they are picked back up again As-Is by the re-rendering process.
If I had to guess at the reason for this behavior based on the symptoms, I would say that it seems like Lightroom is forcing itself to re-render 1:1 previews upon browsing to images that are older than a certain age (very possibly the same "30 days" after which the 1:1 previews are supposed to be discarded).
Now, I've also observed that deleting the DAT files in the Camera Raw Cache folder has no adverse impact on load speed (which is what I would have expected to see if LR3 was looking for and loading images from this cache instead of the Previews folder).
What this means to me is that once the image previews reach this "outdated" state, I can't get fast 1:1 browsing performance in Loupe with any reliable procedure other than manually deleting [in Windows Explorer] the entire Preview folder and then re-rendering the 1:1 previews for this shoot. This is of course terribly inconvenient when there are recent previews that I want to save.
Note: I do not have any slowness under any circumstance when browsing at "Zoom to Fit". This is only a problem when I'm browsing at 1:1 zoom (like when I'm comparing sharpness between a set of photos).
Note: For images with the slow behavior described, once the image has been loaded once at 1:1 zoom, it's henceforth snappy again when returning to the image (as if Lightroom was once again accepting the Preview file as valid).
So, here's a summary:
Previews (X:\Lightroom Catalog Previews\) and Camera Raw Cache (X:\Lightroom Cache\) are on same, dedicated, fast drive
1:1 previews from recently-imported files load full-res at 1:1 zoom in less than 1/2 second.
Older 1:1 previews take 3-5 seconds to load full-res at 1:1 zoom, even though the previews are supposedly being loaded from still-valid 1:1 previews in the Previews folder.
I'm really tired, so i hope this makes sense. I don't see how this could be a hardware problem, because I get good performance with recently-imported images. I'm running LR3.3 on Win 7 Pro x64 with 8 GB of RAM and a 2.4 GHz Intel Core2 Quad CPU. Never had LR3 beta installed - upgraded to 3.0 from the last 2.X version. After upgrading, in response to this exact issue, I deleted my entire previews folder and rebuilt, but I continue to have the exact same problem on every shoot that I import. It's most noticeable on the large shoots, because I end up having to browse at 1:1 zoom to compare a set of similar images.
Only workaround I've found: in Windows Explorer, manually delete the Previews folder. Return to Lightroom and rebuild 1:1 previews. This forces the previews to be rebuilt for all images.
Another possible workaround I am going to experiment with: setting the Previews to "Do Not Discard", in case the defualt "Discard after 30 days" that I've used is causing or contributing to the problem. If Lightroom is actually discarding the images after 30 days but forgetting that it had discarded them when asked to re-render 1:1's, maybe setting to "Do not discard" will bandage that problem by never discarding them to begin with.
All right, I'm falling asleep at the keyboard. I'm afraid to add more details as they may become incoherent. Hope to hear some good news, as fixing this problem would make my LR3 experience so much more pleasant.
Can anyone assist with this problem?
- Tyson

function(){return A.apply(null,[this].concat($A(arguments)))}
Ian Lyons wrote:
The behaviour after previews have been around for a while (i.e. previews for unedited images) is not normal. There have been a few other reports of similar behaviour, but no real clues as to why it happens.
Yes - this is my problem. Previews should still be valid, and "Library > Previews > Render 1:1 Previews" says the images are still valid, but then Loupe rebuilds them anyways.
function(){return A.apply(null,[this].concat($A(arguments)))}
Ian Lyons wrote:
If everything was working correctly, the setting for discard shouldn't have any effect on whether the previews go stale or not. ...
My understanding is that if everything were working as intended, the "setting for discard" that I was referring to (Edit > Catalog Settings > File Handling > "Automatically Discard 1:1 Previews") should be the sole determinant of whether 1:1 previews must be rebuilt for images with unmodified settings.
For example, if I import an image and render a 1:1 preview, and if I set the "Auto Discard 1:1" setting to "30 Days", and if I make no changes to the image's settings, then I would expect that the image should render quickly (under 1/2 second) at 1:1 zoom in Loupe view for the next 30 days. On the 31st day, I would expect the image to take longer to load as a new 1:1 preview was rendered and stored, and then I would expect this new preview to be retained for another 30 days.
I would furthermore expect that the 30-day counter would be reset every time the image was re-rendered (i.e. if I go into Develop and change something).
To a certain extent, this is functioning correctly on my system. When I go to one of these "problem images" that inexplicably load slowly, returning to them subsequently is quick. I think my problem is just, as Rob suggested, that some part of Lightroom's "brain" has wacky ideas about whether an up-to-date 1:1 preview exists or not.
If I choose to "Never" automatically discard 1:1 previews (which is what I just switched to), then I should "Never" see unmodified images taking 3-5 seconds to "Load" at 1:1 zoom in Loupe.
Since I just nuked my Previews folder again last night and re-rendered 1:1's overnight for a 3000 image shoot, it might be a while before I start encountering this bug again. I will certainly post any further related experiences here and will keep checking for anyone who has further insight.
function(){return A.apply(null,[this].concat($A(arguments)))}
Ian Lyons wrote:
...we know that Lr3.4 RC fixed the manual discard bug, so, if I were you I would focus any further tests on Lr3.4RC.
Thanks for pointing this out. I will upgrade to 3.4RC - at least then I will be able to force a rebuild of previews from one shoot without having to manually delete the previews for my entire catalog. I'll no longer have to throw out all the food in the refrigerator just because something smells funny.
function(){return A.apply(null,[this].concat($A(arguments)))}
Ian Lyons wrote:
The DAT files are created at the same time as Library previews. However, they are only used in Develop module.
Yes, I definitely agree with this (although, the Cache is probably also used while rendering new previews after "Quick Develop" changes in the Library module....). I posted my observations to this effect just in case someone else wondered the same thing I did. It is clear that the DAT files get written every time a preview is rendered for RAW file. Rob, now that I'm thinking with a clearer mind, I think the only thing these Cached files are used for is if you "return" to recently rendered settings in Develop or Quick Develop - then, that particular combination of settings yields a match in the cache, and LR loads the image from the Cache into Previews and onto the screen. It is logical that the cache wouldn't help us when going to new settings, because the new settings would create a partially or completely different rendering than any other combination of settings. Adobe may be going to more advanced levels of "reusability" than this, but I'm sure this is the general state of things.
You may want to open back up write access to that Cache folder...
Thanks, Rob & Ian!
So, my question, or bug report, still remains for now - why am I biting into a bag of chips marked "Fresh" and finding them Stale? And why does it say "Paper Jam" when there is no paper jam?

Problem in using module AF_Modules/StrictXml2PlainBean in xml to file scena

Hi Expert ,
I have problem in converting XML to CSV in the following structure.
MT_EAN_MASTER
       -E1WBB01
              -E1WBB03
                       -EAN_MASTER
                                -Item_no
                                -Item_desc
                                -ean
I am using AF_Modules/StrictXml2PlainBean in receiver communication channel.
modulekey               parametername                                         parametervalue
abc                          EAN_MASTER.fieldSeparator                    , (comma)
abc                          recordTypes                                              EAN_MASTER
I have to use 3 level hierarchy structure because of a requirement where an item can have multiple ean.
CSV is not getting generated as it is giving me an error in RWB as
The element nesting level for the structure EAN_MASTER is too deep (reference: 3 levels, found: 4 levels): com.sap.aii.af.modules.conversion.xml2plain.ConversionException: The element nesting level for the structure EAN_MASTER is too deep (reference: 3 levels, found: 4 levels) at XML element MT_EAN_MASTER,E1WBB01,E1WBB03,EAN_MASTER
Please provide some solution to generate a CSV with end seperator as newline.

For this scenario,
First I have used FCC for the same structure and CSV is also generated, but the CSV when opened with NOTEPAD it is not showing endSeparator , i.e my first row last element is concatenated with second row first element,there is no row seperator.
But the same when opened with WordPad,we can see the data, row wise
now the destination system open the file in notepad only.
for that i tried using this Bean specified above but it is not fulfilling the requirement.
The parameters I have mentioned in FCC are as follows:
Recordset Structure : E1WBB01,E1WBB03,EAN_MASTER
NAME                                      VALUE
EAN_MASTER.fieldSeparator     ,   (comma)
EAN_MASTER.endSeparator     'nl'
E1WBB03.fieldSeparator            ,
E1WBB03.endSeparator             'nl'
E1WBB01.fieldSeparator            ,
E1WBB01.endSeparator             'nl'
Please provide a solution,why thr endSeparator is not shown in notepad.
Thanks

Lightroom 5.0 on Windows 7 - Photo Caption problem in Book Module

Using Lightroom 5.0 on Windows 7, I have produced a 76 page book in the Book Module with multiple photos on most pages, but two photos were not showing their captions, and did not print same in a proof PDF print run. I had the photo captions in the Meta Data, but have subsequently entered the pertinent photo caption via Custom Text from the left control panel, and also directly into the photo caption print box without success. I have changed the photo size, without a successful outcome, but when I did an auto cell fill of the photo the caption appeared within the photo, but disappeared when sizing was reduced back. I have exhausted all help avenues at this stage.

Frustrated Beginner wrote:
Thanks for your input and efforts to assist. I have resisted removing and replacing, as the 1966 passport photo has a lengthy (approx 60) adjustments showing in the history, as a result of its age. Hence I think that I will just have tolerate these somewhat minor, I suppose, aberrations and just send it off to Blurb as is, as restoring so many old photos to a more presentable print status has taken me 3 months as it is.
I don't understand why this a problem. You are removing a page from the book and adding back again. You are not removing the photo from the catalog, therefore you would not loose you are adjustments. Books are just another way of rendering photos.

Problem importing a module and finding it's commands?

Hi,
I have a problem. I'm trying to import the DFSR module and use it's commands in my PS session.
But, I can't get the commands to show.
I've looked in my system32 directory and I can see the DFSR module folder.
But when I run the command to import the module nothing happens, and it's not showing in my Module window in the ISE.
What could be going wrong?
Thanks

Get-Module -List DFSR
Where did you save the module to?
Modules should be saved to the Modules folder of the profiles folder.
dir "$(Split-Path $profile.CurrentUserCurrentHost)\Modules"
dir "$(Split-Path $profile.AllUsersCurrentHost)\Modules"
¯\_(ツ)_/¯

Having problem with develop module

When I take a pic from library to develop module, I get the "loading" message but then it doesn't go off (and doesn't load); this is a new problem; hasn't happened before; I don't know if recent loading of 2.6 version caused a problem. Thanks for any insight.

Is there anyone that can help? This is frustrating to say the least. The edits are taking effect, but only showing on the filmstrip. If I go back to library the edits are there, and will then show in develop when I take it back again. This makes it just about impossible to apply anything like cloning, or minute edits, because I can't see them when they happen!!

Problem with Fabric Module 2 in Nexus 7010

Hi, I’ve got this problem with my N7K and 2 of the fabric module’s. The front LED of the N7K is yellow/orange instead of green (it’s supposed to be green I believe). Not sure what this relates to, hw issue, config issue or?
As you can see below, 2 of the fabric module are powered down. Restarting the fab’s og restarting the N7K does not power up the fab module’s.
VDC-ADMIN# sh module
Mod Ports Module-Type                         Model              Status
4    12     10/40 Gbps Ethernet Module          N7K-F312FQ-25      ok
5    0      Supervisor Module-2                 N7K-SUP2E          active *
6    0      Supervisor Module-2                 N7K-SUP2E          ha-standby
7    12     10/40 Gbps Ethernet Module          N7K-F312FQ-25      ok
10   4      Network Analysis Module NAM-NX1     N7K-SM-NAM-K9      ok
Mod Sw              Hw
4    6.2(6a)         1.0
5    6.2(6a)         6.0
6    6.2(6a)         6.0
7    6.2(6a)         1.0
10   6.2(6a)         1.0
Mod      Application Image Description    Application Image Version   Status
10       Application linecard image       6.0(1)                      ok
Mod MAC-Address(es)                         Serial-Num
4    28-34-a2-ab-e1-dc to 28-34-a2-ab-e2-17 JAE181002NA
5    e4-c7-22-10-2f-4f to e4-c7-22-10-2f-61 JAF1748AFJR
6    e4-c7-22-0f-dd-13 to e4-c7-22-0f-dd-25 JAF1748AFKG
7    54-4a-00-ac-09-d8 to 54-4a-00-ac-0a-13 JAE181002PX
10   e4-c7-22-0f-95-e6 to e4-c7-22-0f-95-ef JAF1801AABH
Mod Online Diag Status
4    Pass
5    Pass
6    Pass
7    Pass
10   Pass
Xbar Ports Module-Type                         Model              Status
1    0      Fabric Module 2                     N7K-C7010-FAB-2    ok
2    0      Fabric Module 2                     N7K-C7010-FAB-2    ok
3    0      Fabric Module 2                     N7K-C7010-FAB-2    ok
4    0      Fabric Module 2                     N7K-C7010-FAB-2    powered-dn
5    0      Fabric Module 2                     N7K-C7010-FAB-2    powered-dn
Xbar Power-Status Reason
4    powered-dn     Reset (powered-down) because module does not boot
5    powered-dn     Reset (powered-down) because module does not boot
Xbar Sw              Hw
1    NA              1.5
2    NA              1.5
3    NA              1.5
Xbar MAC-Address(es)                         Serial-Num
1    NA                                      JAF1749AFAB
2    NA                                      JAF1749AFDF
3    NA                                      JAF1748AEQR
4    NA                                      JAF1746BEFB
5    NA                                      JAF1749AMCA
* this terminal session
VDC-ADMIN#

Well, not much info from that command.
VDC-ADMIN# sh environment power
Power Supply:
Voltage: 50 Volts
Power                              Actual        Total
Supply    Model                    Output     Capacity    Status
                                 (Watts )     (Watts )
1        N7K-AC-6.0KW               800 W       6000 W     Ok
2        N7K-AC-6.0KW               641 W       6000 W     Ok
3        ------------                 0 W          0 W     Absent
                                  Actual        Power
Module    Model                     Draw    Allocated    Status
                                 (Watts )     (Watts )
4        N7K-F312FQ-25              289 W        340 W    Powered-Up
5        N7K-SUP2E                  128 W        265 W    Powered-Up
6        N7K-SUP2E                  128 W        265 W    Powered-Up
7        N7K-F312FQ-25              281 W        340 W    Powered-Up
10       N7K-SM-NAM-K9              333 W        750 W    Powered-Up
Xb1      N7K-C7010-FAB-2             39 W         80 W    Powered-Up
Xb2      N7K-C7010-FAB-2             39 W         80 W    Powered-Up
Xb3      N7K-C7010-FAB-2             44 W         80 W    Powered-Up
Xb4      N7K-C7010-FAB-2            N/A           80 W    Powered-Dn
Xb5      N7K-C7010-FAB-2            N/A          80 W    Powered-Dn
fan1     N7K-C7010-FAN-S            198 W        720 W    Powered-Up
fan2     N7K-C7010-FAN-S            198 W        720 W    Powered-Up
fan3     N7K-C7010-FAN-F             14 W        120 W    Powered-Up
fan4     N7K-C7010-FAN-F             14 W        120 W    Powered-Up
N/A - Per module power not available
Power Usage Summary:
Power Supply redundancy mode (configured)                PS-Redundant
Power Supply redundancy mode (operational)               PS-Redundant
Total Power Capacity (based on configured mode)               6000 W
Total Power of all Inputs (cumulative)                       12000 W
Total Power Output (actual draw)                              1441 W
Total Power Allocated (budget)                                4040 W
Total Power Available for additional modules                  1960 W
VDC-ADMIN#

Oracle 9i Lite Mobile Server deploye Problem As Apache Module

I am trying to get the Oracle9i Lite Mobile Server run as a Module under Apache.
my platform is Linux 7.2, which of course is documented as an option.
I managed to install the mobile server and the following document is
the latest from ORACLE site. and is very useful.
http://technet.oracle.com/docs/products/lite/doc_library/release501/readme.htm#new
I have one problem to overcome the module to load in Apache
'libwtgapach.so'
is the required shared library.
This does not load due to following error,
Cannot load /var/ORACLE/mobile/server/bin/libwtgapach.so into server:
/var/ORACLE/mobile/server/bin/libwtgapach.so: undefined symbol:
ap_global_ctx
All the libraries can be resolved here is the ldd ( link map )
ldd libwtgapach.so
liborafc.so => /var/ORACLE/mobile/server/bin/liborafc.so (0x40007000)
libjvm.so => /var/ORACLE/jdk/jre/lib/i386/classic/libjvm.so
(0x4002a000) libhpi.so =>
/var/ORACLE/jdk/jre/lib/i386/green_threads/libhpi.so (0x400bd000)
libdl.so.2 => /lib/libdl.so.2 (0x400dd000)
libpthread.so.0 => /lib/i686/libpthread.so.0 (0x400e1000)
libstdc++-libc6.1-1.so.2 => /usr/lib/libstdc++-libc6.1-1.so.2
(0x400f7000)
libm.so.6 => /lib/i686/libm.so.6 (0x40139000)
libc.so.6 => /lib/i686/libc.so.6 (0x4015c000)
libnsl.so.1 => /lib/libnsl.so.1 (0x40297000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x80000000)
I found this post explaining to recompile Apache
This actually means you installed mod_ssl as a DSO, but
. without rebuilding Apache with EAPI. Because EAPI is a
requirement for mod_ssl, you need an extra patched Apache
(containing the EAPI patches) and you have to build this
Apache with EAPI enabled (explicitly specify --enable-rule=EAPI
at the APACI command line).I recompiled apache with the following
./configure --prefix=/usr/local/ssl-apache/httpd-2.0.39
--enable-rule=EAPI ; make ; make install
I still get the same error when I try to load the module.Am I missing
something?
Any help is deeply appreciated.
-- ajith

Scott, I have yet to get WTG server to work as an NT service when loaded as an Apache module.
We've had to load it into a non-service based Apache server (one that runs from the command line in a MS-DOS prompt window). This is on XP Pro.
We've switched to running our WTG server on Linux.

2 problems! - RAM module broken & Snow Leopard not loading

Hi,
I have 2 problems:
I got Mac Mini (late 2009 model, 2,26ghz, 2gb) upgraded from 2GB to 4GB from this Apple Premium Reseller (http://www.stormfront.co.uk/). When I got it back and switched it on and immediately got 3 beeps which indicated bad ram or logic board. The y took it back and said they sent it to their workshop in Exeter and fixed it. When I switched it on I still got 3 beeps. Took it back to the shop they said don't what to do and get the workshop to ring me back on Monday. At this point I'm fuming!!! So I decided to take apart the Mac MIni myself. Upon discovery that one of the memory modules is broken, I bent the bit metal back and it seems to ok after hardware tests and is working now. What can I do about this? I honestly did not break this and know it was the shop but how I van prove this? What would be done about a replacement as I have no longer sold, would I get a discount on brand new mac mini?
As mentioned above that I took it apart I cant load up Snow Leopard, I just get the Apple logo plus the spinning wheel I can hear some hard drive activity but does nothing ( I left it for 20 mins). I then booted from the SNow Leopard and ran disk verify it came up with errors and said to format and restore, which I have done via Time Machine. But I still get the Apple plus spinning wheel. I know the hard rive ok now because I can boot into Windows via bootcamp. So what I should do?
Any help would be appreciated.

it seems that it's not emptying trash for you. only emptying trash will actually free up space on the drive. what exactly happens when you empty trash? does it seem to empty?
click on the trash in the dock. is there anything inside?

Problem using Function Module IDOC_INBOUND_ASYNCHRONOUS

Hi friends,
I have a critical problem load idoc ARTMAS05. I development a program for load the data with idoc but my program call the function module IDOC_INBOUND_ASYNCHRONOUS close my session of the SAP GUI and lose the load. This problem begining today because yesterday was work well. This morning when I'm load the idoc gave to me a short dump with this message "SNAP_NO_NEW_ENTRY" I have find some notes and obtained this note 17537.
Note Solution
Solution
When the SNAP Table is full: Reorganize the table e.g. via Transaction ST22->Go to->Reorganize. Please also refer to Note 16083. This may lead to other errors of this kind since not all dumps e.g. from SM21 can be displayed.
In case of database problems, the errors should no longer occur with new short dumps after correcting the database error. Here, other errors of this kind may occur in SM21 as well.
After apply the correction begin the error that I close me the Session of SapGui and lose all my data proccessing. Please need your help.
Thank and regards..

Hi Sir,
I am also facing the same issue...i need to update dependents Information Date Of Birth n Perid(Which is stored in IT0106)...in IT 0021..
Kindly correct my code....
I am using the following code for this...
data: w_return type bapireturn1.
data: p0021_struc TYPE p0021,
      p0106_struc TYPE p0106,
      p_pskey   TYPE pskey.
start-of-selection.
get pernr.
p0021_struc = p0021.
p0021_struc-favor = 'Gaurav'.
p0021_struc-fgbdt = '05/10/1955'.
Move p0021_struc-favor to p0021-favor.
p0106_struc = p0106.
p0106_struc-stras = '2235 BOmbay Road'.
p0106_struc-perid = '123456789'.
MOVE p0106_struc-stras to p0106-stras.
Enqueue personnel number
call function 'BAPI_EMPLOYEE_ENQUEUE'
    exporting
      number = pernr-pernr
    importing
      return = w_return.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
      infty            = p_pskey-infty
      number           = p_pskey-pernr
      subtype          = p_pskey-subty
      objectid         = p_pskey-objps
      lockindicator    = p_pskey-sprps
      validityend      = p0021-endda         " '99991231'
      validitybegin    = p0021-begda
      record           = p0021_struc
      operation        = 'mod'
      tclas            = 'A'
      dialog_mode      = '2'
     nocommit         = p_test
      VIEW_IDENTIFIER = '07'              "p0003-viekn
      secondary_record = p0106_struc
    IMPORTING
      return           = w_return
     key              = familykey
    EXCEPTIONS
      OTHERS           = 0.
Enqueue personnel number
call function 'BAPI_EMPLOYEE_DEQUEUE'
    exporting
      number = pernr-pernr
    importing
      return = w_return.

Hi problems in function module

Hi friends I have the following problems.........
When I am using this following code in a function module
its not giving me output until i comment those two fields kwmeng and netwr..i have use VRKME and WAERS for those two..........which are the components of a structure i have created....unless i comment them its giving dump
but when i am using the same thing in report...i am getting
values..off course there is no use of structures......i am creating internal tables and using them ...
i need to use this functio module...how can i get the data from those two fields..tell me the
SELECT vbak~vbeln
       vbak~erdat
       vbak~vkorg
       vbak~ABRVW
       vbak~augru
       vbak~kunnr
       vbap~posnr
       vbap~matnr
       vbap~vkaus
       vbap~spart
     vbap~netwr
       vbap~waerk
     vbap~kwmeng
       vbap~kondm
       vbap~mvgr1
       vbap~mvgr2
       vbap~mvgr3
       vbap~mvgr4
       vbap~mvgr5
FROM vbak AS vbak INNER JOIN vbap AS vbap
ON vbakvbeln EQ vbapvbeln
INTO corresponding fields of TABLE tvbak
WHERE vbak~vbeln = vbeln1.

there is aproblem witht he last line of your code:
WHERE vbak~vbeln = vbeln1.
it should be
WHERE vbakvbeln = vbapvbeln.
There is no problem with selection of netwr or Kwmeng .
Edited by: Rachana Singh on Jan 21, 2008 9:09 AM

Problems in Function Module of a Custom Virtual Cube

Hi all,
I have copied a Function Module-- RS_BCT_FIGL_DATA_GET_VC10 into a custom one ZRS_BCT_FIGL_DATA_GET_VC10. A custom Virtual Cube(ZFIGL_V10) was also created using this FM. The Function Module and Function Group are activated and there are no syntax errors in the custom FM.
When I try to check data of this virtual cube using the T-CODE "listcube" it gives me the following errors.
1. "An exception with the type CX_SY_DYN_CALL_ILLEGAL_FUNC occurred, but was neither handled locally, nor declared in a RAISING"
2. "The function call failed; the function ZRS_BCT_FIGL_DATA_GET_V10 is either not activated or contains no code"
Also some queries are not executing in this Virtual Cube.
Could not figure out what the problem was.Can someone help me on this?
Thanks
Maddy

HI,
Can you check whether the FM is activated. Also check the function module group is activated or not. You can check the status of the same via SE80.
Goto SE80 -> Select function grp -> give your function grp and press enter
Double click on the below funtion grp to check status.
Also expand FM and check whether it is activated.
Also check the import and export parameters of the FM. Try to see whether there is any discrepancy.
If any default values are specified, check whether they are correct.
Also try to debug, put a breakpoint in your code and check whether it gets into the code or not.
Regds,
Shashank

PROBLEM in function module extractor

Hi ,
i m facing a problem in creating a function module as extractor in srm but its not working plz letme know the way i can create the zfunction module as extrator.
i created a datasource ZSRM_CS in which i m using BBP_PDS_CND as extraction structure and Z_BIW_GET_DATA_SIMPLE as zfunction module
but even wen i use rsa3 in debug mode its not stoping and gives error
ERROR6 plz letmme know the problem.
i copied the standard module RSAX_BIW_GET_DATA_SIMPLE .
n hide the irrelvant things. tell me y its not stoping in debug mode in rsa3
Thnx
Regards

Thnx for ur concern ...but i have already mentioned. my code goes llike this.plz have a luk
FUNCTION Z_BIW_GET_DATA_SIMPLE.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR OPTIONAL
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA TYPE ZT_BBP_PDS_CND OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
Example: DataSource for table SFLIGHT
TABLES: ZQUOTATION.
Auxiliary Selection criteria structure
DATA : L_S_SELECT TYPE SRSC_S_SELECT.
DATA : GIT_QTN type table of ZQUOTATION with header line .
DATA : GIT_TAB type table of BBP_PDS_CND with header line .
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
          S_COUNTER_DATAPAKID LIKE SY-TABIX,
cursor
          S_CURSOR TYPE CURSOR.
Select ranges
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
         L_R_CONNID FOR SFLIGHT-CONNID.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
CASE I_DSOURCE.
   WHEN '0SAPI_SFLIGHT_SIMPLE'.
     WHEN OTHERS.
      IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
       LOG_WRITE 'E'                  "message type
                 'R3'                 "message class
                  '009'                "message number
                 I_DSOURCE   "message variable 1
                ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
   ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
   S_S_IF-MAXSIZE   = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
   APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
   IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
   select * from ZQUOTATION
            into table GIT_QTN .
   LOOP AT GIT_QTN .
    CALL FUNCTION 'BBP_PDCND_GETDETAIL'
      EXPORTING
        i_p_guid                      = GIT_QTN-GUID1
       I_P_KIND                      = 'B'
       I_OBJECT_TYPE                 = GIT_QTN-OBJECT_TYPEH
     IV_VERSION_TYPE               = ' '
        iv_header_guid                = GIT_QTN-HEADER
      IV_WITH_DELETED_RECORDS       = ' '
     IMPORTING
       ET_CONDITIONS                 = GIT_TAB
      E_COM                         =
    TABLES
      E_T_DATA                      =
      MOVE-CORRESPONDING GIT_TAB TO E_T_DATA.
    ENDLOOP.
     LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CARRID'.
       MOVE-CORRESPONDING L_S_SELECT TO L_R_CARRID.
       APPEND L_R_CARRID.
     ENDLOOP.
     LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CONNID'.
       MOVE-CORRESPONDING L_S_SELECT TO L_R_CONNID.
       APPEND L_R_CONNID.
     ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
     OPEN CURSOR WITH HOLD S_CURSOR FOR
     SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
                              WHERE CARRID IN L_R_CARRID AND
                                    CONNID IN L_R_CONNID.
   ENDIF.                             "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
   FETCH NEXT CURSOR S_CURSOR
              APPENDING CORRESPONDING FIELDS
              OF TABLE E_T_DATA
              PACKAGE SIZE S_S_IF-MAXSIZE.
   IF SY-SUBRC <> 0.
     CLOSE CURSOR S_CURSOR.
     RAISE NO_MORE_DATA.
   ENDIF.
   S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.
plz letme know where i m wrong in code,
wt my code is doing its picking the GUID! and header from view zquation and through fm 'BBP_PDCND_GETDETAIL' its returning et conditions whichi have to pass to data source .
Thnx

Reg: code problem in Function module

Hi Friends,
I am facing problem while developing Function module.
i declared following things in Import.
""Local Interface:
*" IMPORTING
*"     VALUE(SOURCETABLETXT) TYPE STRING
*"     VALUE(SELECTTXT) TYPE STRING
*"     VALUE(SOURCEINFOOBJECT) TYPE STRING
*"     REFERENCE(ITAB_OUTTAB)
*"     REFERENCE(ITAB_SOURCEPAK)
In source code writen as,
DATA DREF1 TYPE REF TO DATA.
FIELD-SYMBOLS: <ITAB_SPACK> TYPE ANY TABLE,
                    <WA1> TYPE ANY,
TYPES: BEGIN OF SOURCEIOJ,
        SOURCEINFOOBJECT(72) TYPE C ,
       END OF SOURCEIOJ.
DATA: ITAB_SOURCEIOJ TYPE TABLE OF SOURCEIOJ.
DATA: WA_SOURCEIOJ LIKE LINE OF ITAB_SOURCEIOJ.
ASSIGN ITAB_SOURCEPAK->* TO <ITAB_SPACK>.
CREATE DATA DREF1 LIKE LINE OF <ITAB_SPACK>.
ASSIGN DREF1->* TO <WA1>.
LOOP AT <ITAB_SPACK> assigning <WA1>.
READ TABLE ITAB_SOURCEIOJ INTO WA_SOURCEIOJ WITH KEY SOURCEINFOOBJECT = <WA1>-SOURCEINFOOBJECT.
IF SY-SUBRC <> 0.
WA_SOURCEIOJ-SOURCEINFOOBJECT = <WA1>-SOURCEINFOOBJECT.
INSERT WA_SOURCEIOJ INTO TABLE ITAB_SOURCEIOJ.
ENDIF.
ENDLOOP.
While checking i am getting error as The data object "<WA1>" has no structure and therefore no componentcalled "SOURCEINFOOBJECT". called "SOURCEINFOOBJECT".
SOURCEINFOOBJECT is not field in internal table which passing as reference and hence not in WA1.
But the input field which i give to SOURCEINFOOBJECT while calling the FM, that input field is the part of the intenal table
<ITAB_SPACK>, which ref of ITAB_SOURCEPAK passing to FM.
Please give some idea how to handle this.
Regards
MRK

Hey,
you declared <wa> as field symbol, so it won't contain the field that you are trying to read. Go through the following; it may help you.
Loop at <ITAB_SPACK> assigning <WA1>.
        do.
          assign component sy-index of structure <wa1> to <dyn_field>.
          if sy-subrc <> 0.
            exit.
          endif.
          if sy-index = 1.
            WA_SOURCEIOJ-SOURCEINFOOBJECT = <dyn_field>.
          else.
            WA_SOURCEIOJ-SOURCEINFOOBJECT = <dyn_field>.
          endif.
        enddo.
       endloop.
with regards
Mahesh

Problem in SD module

Similar Messages

Maybe you are looking for