Problem in seeing a shape from different angle

Hi all,
I am facing the problem in seeing an arrow on canvas. I am using QuadArray to form a shape of Arrow.
I have created an arrow on a location where i click on canvas.
When i see it from different angles, some of the surfaces got disappear even though they are in existence from another angle. Can any one tell me why the shapes are visible from particular angle and disappear from another?
Thanks!
Vivek

Hi
I have been facing similar problem while creating planes. I have put the problem aside to get the project going. But I am conviced that it might be a lighting problem. but adding a light on the other side hasn't helped. Here is the post that shows my code. The problem isn't solved, but it might give you another perspective.
Let me know if you solved the problem, if so how.
Venkat

Similar Messages

  • Problem in identifying unique records from different tables

    Hello gurus,
    I am on E-Recruitment module.
    I order to get more fields in CANDIDATE_ATTR datasource I have enhanced it. I am getting additional fields from HRP5103 (Employer, Employment Start Date & Employment End Date) & from HRP5104 (Institute, City, Region). In both of the tables there are 9 primary keys out of which only two are different through which we can identify duplicate records i.e. OBJID (denote Candidate ID in both tables) & SEQNR(Number of Infotype Record with Same Key).
    I know that compounding InfoObjects (since i need to pull duplicate records from table as one candidate can have many institute & employer but they will always be referred by same OBJID) is one of the way but how to manage data through compounding coming from 2 tables.
    Also i donot want to create new objects as it will effect whole of the setup.
    Is there any other way.
    Can anyone give idea as to how to get records in BW.
    Thanks in advance.

    Hi Sundar,
    Thanks for your help. I wen tthrough the two discussions and found the following:
    1. I cannot include the primary/unique keys in the selection as it would make everything distinct. This restricts me from pointing me to the exact record that has changed.
    2. The columns would be dynamic. I want a config kind of solution where i can define the tables, columns on both the sides. And add/remove compare fields in the setup tables.
    Thanks,
    Faruq.

  • Problem to see PDF properties from windows explorer

    When we do right click on a pdf then properties then we click on the PDF tab, windows explorer in hanging for a few minutes and then no information is displayed (see print screen).
    We have Adobe Acrobat 10 and Windows Server 2003
    Any idea about this problem ?

    To be precise, we have this problem with Adobe Acrobat Reader 10 (and not Abode Acrobat 10).

  • RRI Jumps from Different Characteristics Produce Different Results

    Hi experts,
    I am having the problem that when I jump from different characteristics in the same row in sender query, I got different result sets. E.g. when I choose "Go to" from the "Name" char I got one record, but from "Transaction Description" char multiple records.
    Could anyone please clarify this problem?
    Thanks,
    Joon

    Hi,
    check the info object mapping in RSBBS.   some time same kind of charactorstics is available in the destination report it show such kind of error.  
    Eg.   0customer to 0ship_to_party , or sold to party ect.
    Just go to RSBBS
    select the type as infoobject ...
    Field name   =  target field 
    for more clarification please refer below link
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?QuickLink=index&overridelayout=true
    regards
    bvr

  • Compare Merge Model problems with models from different connections

    Hi all,
    I've experienced a problem while using the compare/merge model funcion under tools.
    Just to put in place:
    I've 4 model, one for each enviroment that I have: DEV, INT, TEST, PROD(*each model imported from different connections*). Because I haven't found any reliable way to keep them sincronyzed, using DLL deltas. Is there a way to do that?
    Anyway, regarding the main subject problem. Whem I try to sync for example, from PROD, to TEST, using compare/merge model function under tools, the process find the differences. When I selecte those that I want, and click on merge, the destination model TEST, get the selected objects merged into.
    But now, the model Schema, when I select sincronyze model with data dictionary to get de DLL delta, things get crazy, and the merged objects doesn't get detected to be created.
    If it's help, I think that the is with the associated import connection than the merged objects have. They have the PROD connection name, instead of the TEST connection name. Also when I try to syncronize the relational model againts de data dictionary(database), datamodeler ask me wich connection to use, PROD or TEST. When, before, merging, model, data modeler did not ask me anything.
    Why is data modeler doing this?
    What I have seen is when you import in a model things from different connections/models, when you try to sincronyze agains a connection, all objects that are not from the selected connection doesn't get compared.
    Is there a bug or a problem?
    How can I can keep a schema in different enviroments, sync? What are the step that I shoulf follow?
    Thanks in advance.
    Edited by: morfeo8marc on 14-mar-2012 11:17

    I shall try to explain what is happening here.
    When you import objects from TEST data dictionary, their source information (see Summary info in Properties dialog) will refer to TEST.
    The relational model for TEST will contain source information (see Summary info in Properties dialog) for the connection to TEST.
    Similarly, imported objects from PROD will refer to the PROD data dictionary, and the PROD relational model will hold connection details for PROD.
    If you merge PROD objects into the TEST model, they will retain their source information (i.e. referring to PROD).
    The TEST model will be updated to include connection details to PROD.
    When you synchronize a model, if it only has one source connection, it uses that.
    If it has more than one, it will prompt you to decide to which data dictionary it should synchronize.
    In your case, for the TEST data dictionary, it will synchronize all objects that have source information for TEST (i.e. those imported from TEST).
    It will also compare any new objects (i.e. those not imported from a data dictionary).
    It will not compare objects that were imported from a different data dictionary (e.g. PROD).
    This supports the scenario where a model consists of objects imported from more than one data dictionary, and where the data dictionaries are maintained separately.
    We may need to review the above strategy in light of your experience and development process.
    In the meantime, may I suggest that from your updated TEST model, you Import from Data Dictionary using the TEST connection.
    The resulting Compare Models dialog should show all objects (i.e. those from TEST and PROD).
    You may need to set the Swap Models option to generate DDL with which to update your TEST data dictionary.
    Thank you for raising this matter.
    Regards,
    Tony Rose

  • We have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc. from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when

    Hello All,
    we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
    from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
    correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
    I have checked IP,DNS,Gateway and more each & everything is well.
    Pls suggest us.
    Pankaj Kumar

    Hi,
    According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
    Please try to enable the option below on the device which has shared folder:
    Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

    I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

    jpqcampos wrote:
    This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
    You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
    And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
    Here are the two tables, Data on the left and Summary on the right. Notes below.
    The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
    Data table:
    D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
    D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
    D3 (and filled down the rest of column D):   =AND(OR(B2,C2),NOT(OR(B3,C3)))
    The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
    Summary table:
    Column A contains labels for the age ranges to be counted.
    Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
    C2 (and filled right to column D, then both filled down to row 5):
        =COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
    Two changes from the previous example:
    COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
    The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
    See note below regarding my earlier formula.
    When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
    Close the reorganize pane, and the 'data entry form' is ready to use.
    To use, enter the age first, then check one of the boxes.
    As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
    Regards,
    Barry
    Note regarding formula in my earlier post:
    The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
    In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
    Fill down to E8.
    Ignore the instructions (in that post) following "Fill down to E8."
    B

  • Why my calendar display different there is one day difference from different  when I see main screen and open the calendar

    See my Why my calendar display different there is one day difference from different  when I see main screen and open the calendar

    I too am having the same issue only I am in Regina, Canada.  iCloud appears to think Regina, Canada is in the Central time zone which it is, but it does not use Daylight Savings time.  My PC is Windows 7 and I am using Outlook 2010.  I have iCloud on iPhone 5 and iPad 2.   Terribly frustrating!

  • I see lots of people asking questions about the "white screen" app store update failure. I see no answers from Apple about this...What is the problem, and what is the solution?

    I see lots of people asking questions about the "white screen" app store update failure. I see no answers from Apple about this...What is the problem, and what is the solution?

    It's a problem that Apple is having with their App updating system.  The best solution is to be patient, and wait for Apple to solve their systemic problem.

  • Display problem from different domain

    Hi
    I am not able to make my display(DISPLAY variable). When I m exporting the display variable from the same domain as the linux box is present. It is working fine but when I trying to export the DISPLAY variable from different domain and use the GUI. it is throwing error. Please help. Also I am able to ping from my window machine to Sun Solaris
    operating system: sun solaris 9 (5.9).
    Error Message:
    (gnome-calculator:5511): Gtk-WARNING **: cannot open display:
    Can anybody tell me how and what all we need to check to configure DISPLAY.
    I mean the software required and firewall configuration.

    I trying to export the DISPLAY variable from different domain and use the GUI.Different domain or different network?
    I am able to ping from my window machine to Sun SolarisPing means nothing in this case because:
    1. ICMP =! TCP
    2. You need to have allowed connection from Solaris to your local machine (port 6000) and ping is not capable to check that.
    3. You need to check this on/from server (Solaris)
    Or you can use X11Forwarding so you don't need to allow connection as mentioned above.
    I mean the software requiredDo you mean client SW or what?

  • Remove 3D New Shape From Layer

    I've applied the 3D > New Shape From Layer command to an image. Now I'd like to remove the 3D shape and apply a different shape. Is there a way to remove the first 3D shape? I've searched, but haven't found a way to do it.

    Hi,
    From post #8 onward should be a new topic.
    To answer most basically, in order to not have part of a 3D mesh display you need to use opacity maps. This is supported in CS4. There also is a way to hide geometry (or make it invisible) but that won't accomplish what is being asked. It hides whole mesh groups, not just parts of mesh groups.
    If you just want to display the text mapped on a sphere, then you need to setup a matching opacity map. The steps to get this setup is pretty quick, if not discoverable (yes the UI has room for improvement). It can also be made so that the text is live and a single file controls both opacity mapping and text color. Finally, once created, a material can be saved out that can be used in the future to cut out some steps.
    Below are steps, but I haven't confirmed most gotchas. There is one known problem that shows up in the Layers panel (No indication that an opacity map is applied). Another thing is to make sure and save a copy of the final file so you don't overwrite the canned sphere.dae file.
    1) create new 1024 x 512 RGB with transparent background
    2) with Type tool, create a text string to fit middle third of document space
    3) save this file, and close
    4) go to File> Open and browse to Ps application folder> Presets> Meshes> Sphere.dae
    5) expand the 3D panel, select the Sphere_Material, then click the Diffuse map icon and select 'Load Texture...'
    6) select the text file created above to replace the current map file
    7) now click the Opacity map icon and select 'Load Texture...'
    8) again select the text file created above (ok the warning dialog)
    You should now just see text wrapping spherically . At this point you can save out a material preset to apply to any 3D shape without having to build the materail from scratch each time. And make sure to Save As..., closing the original Sphere.dae file without saving to keep that preset clean.
    To change the text again, just open the Diffuse map file in the 3D layer and edit the text layer. Saving the file will update on the model and affect the Opacity map as well (ie. change text string or size).
    Regards,
    steve

  • Can not see running jobs from, package

    I have a problem with processing parallely runing jobs:
    I am creating another immediately runned jobs in a main job. Those two parallel jobs (2 loads from different databases) have to be finished before I run next operation (working out loaded data). Problem is that, after starting those 2 parallel jobs, I can not see them by select from ALL_SCHEDULER_RUNNING_JOBS that is executed immediately after I create those jobs in a package. If I take a look into ALL_SCHEDULER_RUNNING_JOBS from anonymous statement I can see all my running jobs. Let's sum it up:
    1/ Start of main job
    2/ Running 2 immediately created jobs (load data)
    3/ Checking in loop if jobs created in step 2 are still running
    3.1/ Jobs are running (ALL_SCHEDULER_RUNNING_JOBS check) - sleep for a
    while - It never happens - can't see any running jobs from select executed in
    package but can see them in
    anonymous statement
    3.2/ Jobs finished - start processing loaded data
    Can somebody help me with this task?
    Thanks alot!
    Jakub

    Hi,
    There is no reason a job should be visible from an anonymous block but not from inside a job. There are two things that may be happening here.
    - jobs scheduled to run immediately my not start running as soon as they are created/enabled, you may need to wait a bit before they start running (they will appear in all_scheduler_jobs immediately but maybe not all_scheduler_running_jobs immediately)
    - you may be running into privilege issues. Is the user that executes the anonymous block the same as the user that the job is running as (the job's schema) ? If not maybe the job user does not have privileges to see the job (you can grant alter on the job to the user to ensure this).
    Can you see the jobs in the all_scheduler_jobs view from within the job with status RUNNING ? If you can see jobs in all_scheduler_jobs as RUNNING but not in all_scheduler_running_jobs then this is a bug of some sort.
    Thanks,
    Ravi.

  • HT204053 I have multiple devices used by family members, how do you make sure the kids don't see Moms messages from Dad and visa versa?

    I have multiple devices used by family members, how do you make sure the kids don't see Moms messages from Dad and visa versa?

    Hi Roger:
    Thanks for the reply.  I think I figured out the problem.  Apple has confused (at least in my mind) the different IDs that people can have.  In the iCloud settings, they use the term Apple ID and not iCloud ID.  I guess there really is no such thing as an iCloud ID.  There are Apple IDs with various attributes.  This is not clearly explained or easy to see (how could I look up to see if my Apple ID is associated with iTunes for example?).
    I created, what I thought were iCloud IDs for each family member, but we all use my Apple ID for iTunes.
    One other question - why does the syncing of Notes using iCloud require an @me.com email account.  That makes no sense to me.
    Thanks for your help!
    AO

  • In adobe reader, I can't print from different trays?

    Using Adobe Reader, I can't print from different trays on my Lexmark x954 printer.  I've tried reinstalling the print driver (latest version) and reinstalling Adobe Reader with no luck.  I can see the trays and even select them in the print dialog box in adobe but when I print I am unable to print from the correct trays.  It always prints from tray 3 of my printer no matter what tray and type of paper I choose in adobe.  Any suggestions?
    I've also noticed a problem printing through Preview.  I can select different trays using preview but the print time is extremely slow.  It seems like it has to re-download the pdf page each time it goes to print.  So a 100 page print job takes 20-30 minutes to complete which means other have to wait for my job to complete so it really slows our office down.
    Thanks for your help.  Also, I am using the mountain lion operating system.  Thanks again! 

    Don't know whether it will make any difference, but a new version of Adobe Reader has just been released:
    http://www.macupdate.com/app/mac/73/adobe-reader  (version 11.0.03).

  • Slicing image on different angle and exporting to Dreamweaver ?

    Hi!
    I think I searched entire web and didn't find the answer.. Is it possible to slice image on different angle not just rectangle ? On images below you can see the section that I'm trying to make a slice and slowly I'm loosing hope because I think It's not possible ? (and why the h3II is not?? :-) ) It would be little confusing for Dreamweaver when I would try to import that image then, because it's not the "right" shape but.. I'm trying to make a rollover image but I want just a small part of image to rollover to another image that is not the "right" shape... I hope I didnt complicate to much and explaind well what I'm trying to do, you can see the 2 images below for example what I'm trying to do.
    Crop tool allows me to spin rectangle done with it, but still cant use that in Dreamweaver, it rotates the image back at right angle.
    If its not possible with photoshop or dreamweaver, what software is capable of doing it and that i could inport to dreamweaver then ?
    Would be grateful for any tips or link or whatever just not stopping on none-rollover image.
    (i want that to apear when going over with pointer - on wall exactly)

    If you want to change image transparency on mouse over, you can do this with CSS opacity and proprietary MS filters.
    CSS code:
    a img {border:none}
    img a:link {
    /**for non-IE browsers**/
    opacity: 0.5;
    /**for IE8**/
    -ms-filter:"progid:DXImageTransform.Microsoft.Alpha(Opacity=50)
    /**for IE6,7**/
    filter:alpha(opacity=50);
    img a:hover,
    img a:active,
    img a:focus {
    opacity: 10;
    -ms-filter:"progid:DXImageTransform.Microsoft.Alpha(Opacity=100)
    filter:alpha(opacity=100)
    Example:
    http://www.w3schools.com/Css/css_image_transparency.asp
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

Maybe you are looking for