Problem in seeing posts

Hi team,
I have seen some of the posts yesterday and day before in SDN but I am not able to locate them. It is happening like this for two days. Please let me know if you are having any suggestions.
Thanks,
Raj.

Hi Raj,
Above <i>Your Control Panel</i> -link you should see your own name as a link. Click the link and you should be able to see you previous posts.
Also if you click your name on the left (above your total posts count) you'll see the same result.
Regards,
Ville
Message was edited by: Ville Leivo

Similar Messages

  • Problem in seeing a shape from different angle

    Hi all,
    I am facing the problem in seeing an arrow on canvas. I am using QuadArray to form a shape of Arrow.
    I have created an arrow on a location where i click on canvas.
    When i see it from different angles, some of the surfaces got disappear even though they are in existence from another angle. Can any one tell me why the shapes are visible from particular angle and disappear from another?
    Thanks!
    Vivek

    Hi
    I have been facing similar problem while creating planes. I have put the problem aside to get the project going. But I am conviced that it might be a lighting problem. but adding a light on the other side hasn't helped. Here is the post that shows my code. The problem isn't solved, but it might give you another perspective.
    Let me know if you solved the problem, if so how.
    Venkat

  • Problems with the posting period....

    Hi guys,
    every once in a while the old problem with the posting periods occurs. This morning it hit me and I went out to repair it.
    Starting out from MMRV I checked the open period and it said 062009.
    Using MMPV, by mistake, I opened 112009, so that I'm able to post to 112009 PLUS the previous period 102009 (which is ok so far). Later on I checked OB52 to see, if finance is not the problem. The opened period lasts from 012009 to 122009.
    Long story short: everything seems perfectly alright, however it still doesn't work. It says: Posting only possible in periods 2009/11 and 2009/10 in company code 1000
    I don't see where there could be a problem now...
    Any help is greatly appreciated!
    Thx & regards,
    Bobby

    Hi,
    It is possible to re-open a previously closed period. However, it is NOT advisable to do so because the valuation data of the previous period could be affected.
    In general, it is only safe to reopen a previously closed period when no material postings have been done after the period shifting to the new period.
    If there has already been postings after the period shifting to the new period, reverting the period back will cause database inconsistencies in the history tables.
    If you decide to proceed with this process, you can use the program RMMMINIT, but, please review the documentation of this program first!! and the check the SAP notes 487381 (for the error message that you are receiving) and the 369637 (for an explanation about the inconsistencies that will be generated.
    Steps are as below;
    Go to Transaction Code SE38
    Enter program name RMMMINIT
    Execute or press F8 function button
    Enter your company code (From and To)
    Enter relevant date: Say 01/10/2009 for Oct. 2009 month to be opened as of now
    That means, user can post for the month of sept 2009 as well as Oct. 2009
    Refer SAP Note No. 487381 for more details.
    As per SAP Notes 487381 ( If the periods are opened in advance in mmpv to again change it to current period the following process should be follow ), Go to Tcode MMPI, then go to menu bar and select system -> user profile->owndata.In that screen , under the parameters tab enter MMPI_READ_NOTE in Parameter ID field and enter, then under short description you will get Initialise period. Next Save.
    Again go to MMPI enter company code, period and year and execute.
    Other way of doing it is follow these steps: ( *TRY in Sandbox But do not try in PRODUCTION SYSTEM*)
    1. Use t.code: OX18, and delete the plants assigned to your CO.Cd and save.
    2. Use t.code: OMSY and change the posting period to the one u want and save.
    3.Go to OX18 and assign the plants you have deleted in step 1.and save.
    Regards,
    Biju K

  • Hugely frustrating problems on Mac post osx yosemite

    i downloaded osx yosemite onto my macbook air and now my wifi is down after it being fixed for a day, my computer is very laggy, the keyboard is disconnecting and I can't find a way to stop It. And i cant even download the update because App Store is not loading. If there are any suggestions to these problems I would be glad to hear them.
    Regards. Me

    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy
    Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    Wi-Fi Problems in OS X Yosemite
    Wireless Diagnostics
    Also try turning off Bluetooth.

  • Problems to see youtube's vídeos ipad2 takes many time to charge them

    problems to see youtube's vídeos ipad2 takes many time to charge them what's wrong

    Just bought an Ipad Mini for the specific purpose of viewing BIG pdf files for old books written in the 1800's. BIG DISAPPOINTMENT!
    540 pages and after 1 hour to download, I still have to wait 30 seconds for 1 page to load after I turn the page.
    This is not efficient COMPUTER programming and the Apple programming guys really need to be employed from post graduate stock. The Computer '101' guys are obviously not into the mentality of what we the users need.
    For anyone buying an Ipad Mini, I would strongly suggest holding back until Apple can reinvent the wheel. Galaxy is probably a better option until we get another Steve Jobs.
    Cheers guys......

  • I've searched to no avail for this problem. Similar posts but none that tell me what to do. I can't add or delete any bookmarks on my iPad 2 running the newest iOS. I know how it's suppose to work, it just isn't working!

    I've searched to no avail for this problem. Similar posts but none that tell me what to do. I can't add or delete any bookmarks on my iPad 2 running the newest iOS. I know how it's suppose to work, it just isn't working!
    It started after the major update to iOS 7.
    I can't believe that this is so hard to do. It's just not letting me. I can add a bookmark to the home screen just fine, just not in a bookmarks folder anywhere I try.
    I've used Apple products since 2001 and have always loved how intuitive they are. But the Safari browser since iOS 7 has been the worst I've experienced. At least right in the beginning after that update.
    I'd really appreciate any help that doesn't just tell me how it's suppose to work...I know that.
    My iPad 4 is not affected with the problem and works as it should.

    To delete, tap "Edit" (tap to enlarge image)

  • I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    Is the menu bar missing (the one containing File, View, Edit etc)? If it is, the following link shows how to restore it - https://support.mozilla.com/kb/Menu+bar+is+missing

  • Problem while 're-posting' a cancelle Invoice with Exchange Rate Difference

    Hi Gurus,
    We are facing a problem while re-posting an Invoice with Exchange Rate Difference. I say re-posting because this invoice was previously posted and reversed on the same date. Here is the scenario along with the relevant postings:
    1)
    G/R is posted in September when the exchange rate for dollar was, say, Rs. 49 = 1 USD.
    Posting:
    Service A/C.....100 USD (Rs. 4900)
         To SR/IR Clearing A/C...100 USD (Rs. 4900)
    2)
    MIRO is done in October, when the exchange rate was, say, Rs. 48 = 1 USD. Thus, the exchange difference posting was done in the respective accounts.
    Posting:
    SR/IR Clearing A/C......100 USD (Rs. 4900)
         To Vendor A/C...........90 USD (Rs. 4320)
         To TDS A/C..............10 USD (Rs.  480)
         To Exch. Difference A/C. 0 USD (Rs.  100)
    This was the correct entry, however we missed out some TDS codes and thus needed to reverse this entry and repost it.
    3)
    Now this invoice was reversed (T.Code MIRO) in october itself on exactly the same date on which invoice was created, and it resulted in the following postings:
    Vendor A/C......90 USD (Rs. 4320)
    TDS A/C.........10 USD (Rs.  480)
         To SR/IR Clearing A/C...100 USD (4800, i.e. 48 * 100, Rs.48 being the exchange rate in october)
    4)
    Now when we try to post MIRO again, it is posting the following entry:
    SR/IR Clearing A/C......97.96 USD (Rs. 4800)
    Exch. Difference A/C.....2.04 USD (Rs.    0)
         To Vendor A/C........... 85 USD (Rs. 4080)
         To TDS1 A/C............. 10 USD (Rs.  480)
         To TDS2 A/C.............  5 USD (Rs.  240)
    This is a wrong entry. SR/IR clearing A/C should have been debited by 100 USD (Rs. 4900), and the Exch. Rate difference account should have been credited by 0 USD (Rs. 100)
    Can someone please help us with this. What the system seems to be doing is, that when the Invoice was reversed, the value that got reversed for SR/IR Clearing A/C was 100 USD but with Rs. 4800 instead of Rs. 4900. Now, when we try to repost the invoice, the system divided this value by the exchange rate prevalent in September, i.e. Rs. 49, thus the resultant value 97.96 USD (i.e.  4800 / 49).
    Please help.
    Thanks!
    Regards,
    Angad Nagpal

    Solved.
    The final entry is correct, as the net result in the G/L balances is the same. For further information please refer to notes 116250 and 46564.
    Thanks!
    Regards,
    Angad Nagpal

  • Problem with depreciation posting for an asset with a '0' net book value.

    Hi,
    I have a problem with depreciation posting on one asset. I think it should not be calculated and posted at all.
    On 1st November 2010 (our Fiscal year starts on 1st November) there was acquisition posted to an asset and then it was reversed on the same day - so the net book value was '0'.
    In AFAB depreciation run for April 2011 - it posted depreciatoion of 0.01 Euro, so now the book value is -0.01.
    Do you know how this could have happened and what can I do to get the value of this asset back to 0?
    Thank you,
    Karol

    Hi Murlidhar,
    Thank you for your reply.
    I just have one doubt - as depreciation of 0.01 Eur was posted in previous period leaving net value of asset equal to -0.01 Eur.
    Shouldn't I get ritd of this asset value before I proceed with the steps you suggested?
    I think it is not possible to reverse the depreciation - so I struggle to find a way to bring asset value back to zero.
    Thank you,
    Karol

  • After upgrade to iOS 6 i have problems to see or edit movies (.mov)

    After upgrade iOS 6 i have problems to see or edit movies (.mov) i can se only in iTunes, and not in After Effects, or real player, and others in windows like before upgrade.

    I solve upgrade the codecs.

  • Problems to see Flow Trace in production enviroment

    Hello,
    I have any problems to see the process flow trace from production Enterprise Manager but from development environment I can see it correctly
    Environment informations:
    · Development environment:
    Virtual machine in vmware ESXi 4.1 con S.O. Linux Suse Linux Enterprise 11 de 64 bits.
    · Production environment:
    Two virtual partition in IBM power5+ con S.O. AIX 6.1 TL6 y PowerHA 6.1
    When I want to see in production environment the Audit Trail tab or Flow tab from process instance, I can't it because the page is white.
    Thanks in advance

    There likely is a case sensitivity issue or when you did not correctly remove the path reference when you generated the fmx.
    The search path for the image appears to be the FORMS_PATH. So, in your FORMS_PATH, ensure that ORACLE_HOME/forms is first in the list. However, do NOT enter the variable name in default.env when setting the value. You must fully qualify the entry. In other words this is NOT correct:
    FORMS_PATH=$ORACLE_HOME/forms:/u01/ourapp
    You must fully qualify the entry. So, for example:
    FORMS_PATH=/oracle/product/as10/forms:/u01/ourapp

  • Facing problem in MIRO posting

    Dear Experts:
    We are facing problem in MIRO posting for March 2014 entries. When we submit post for a Particular MIRO by giving back date 30.03.2014 then system generating MIRO number but that MIRO number not showing in vendor line item display or document flow. If we go back then system giving below message.
    For your kind information I'm also attaching our number range screen shot.
    For current period we are not facing any issue. Would you please suggest us what should we do to post MIRO by giving date of March 2014.
    Thanks in advance and your kind suggestion is highly appreciated.
    Best Regards.
    Ripon Kumar Paul

    It would be better if you analysis you update termination error in TCode ST22.
    Refer following discussion, where I have explained how to analysis this in ST22.
    - http://scn.sap.com/message/13915998
    Thanks, JP

  • Do not see "Post New Topic" in MacBook Pro forum

    In the MacBook Pro forum I do not see "Post New Topic" at the top of the page as I do on others.
    I am logged in and can see my questions and profile.
    MacBook Pro 15" / OS X / Windows XP (BootCamp)   Mac OS X (10.4.7)   MacBook Pro 15" 1.8 GHz / 80 Gb / 512 Ram

    Daniel,
    Please see this post a little ways down this page.
    Several people have already answered this for you.
    (I know, it can be confusing sometimes.)
    http://discussions.apple.com/thread.jspa?threadID=561477&tstart=0
    Hope that will help you figure it out.

  • Infinity problem – can I post links?

    Infinity problem – can I post links?
    I have Infinity problem, can I post a link to a conversation screenshot I had with a member of staff as long as I have blurred ALL mine and the bt staff members personal details?

    NO...
    You could always link it... [url http://www.politicsforum.org/images/humour/t3_mission.jpg]like this...

  • Problem to see a new book type in project

    Dear friends;
    I have a problem to see a new book in the module project.
    The steps for create the book are the next:
    1. - I create the book in the Fixed Asset module in the Book Controls option.
    2. - Associate this book to a category in the Fixed Asset module option in the Asset Categories
    3. - In the Project module to want to assign it to a project I was not shown in book value list
    I missing some step?
    Thank you in advance for your support
    Best Regards
    Tom

    Dear Tom,
    Please check the Profile options, Security Assiginments, Asset Book dates and Project dates..........
    Regards
    Raghvender

Maybe you are looking for