Problem in select

hi,
i do a program for search string from table and field v_pattern2 is field that the user input and the bapi search the string in table tcurc,the problem here that i can do search for just 8 or less
character if i do more then that i get dump
what couled be the problem?
Regards
CONCATENATE '%' v_pattern2 '%' INTO v_pattern2.
SELECT waers "This Search for take currency key
FROM tcurc
INTO TABLE curr_tab2
WHERE waers LIKE v_pattern2.

The problem is:
Abstrct from the short dump
The pattern for a LIKE operator (with the exception of
closing blanks) cannot have more than 10 characters. This is the
minimum of 256 and twice as long as the database field (5) to which
the condition applies.
In this particular case, the pattern contains
    "%TEST11111%"
more than the maximum permitted 10 valid characters.
Means you will have only 8 characther left apart from 2 % to compare with the WAERS (lenght 5).
So, make your V_PATTER2 as 8 length field.
Regards,
Naimesh Patel

Similar Messages

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.

You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Problem with selecting text in Adobe Reader XI

Hi all, I am encountering a problem with Adobe Reader XI and it is very strange I could not find an alike issue on the internet so I guess I have to submit a question with it.
So here it is, I am using Adobe Reader XI Version 11.0.2, operating system: Windows 7. I do not know it starts from when but it has the problem with selecting text - to be copied in pdf documents. I ensure that the documents are not scanned documents but word-based documents (or whatever you call it, sorry I cannot think of a proper name for it).
Normally, you will select the text/paragraph you want to copy and the text/paragraph will be highlighted, but the problem in this case that I cannot select the text/paragraph, the blinking pointer (| <-- blinking pointer) will just stays at the same location so I cannot select/highlight anything to be copied. It happens oftenly, not all the time but 90%.
This is very annoying as my work involves very much with copying text from pdf documents, I have to close the pdf file and then open it again so I can select the text but then after the first copying or second (if I am lucky), the problem happens again. For a few text I have to type it myself, for a paragraph I have to close all opening pdf documents and open again so I could select the paragraph to copy. I ran out of my patience for this, it causes trouble and extra time for me just to copying those texts from pdf documents. Does this problem happen to anyone and do you have a solution for this? I would much appreciate if you could help me out, thank you!

Yeah, I totally agree, this is very strange. I have always been using Adobe Reader but this problem only occurred ~three months ago. It must be that some software newly installed I think. But I have no idea.
About your additional question, after selecting the texts and Ctrl + C, the texts are copied and nothing strange happens. It's just that right after I managed to copy the texts, it takes me a while to be able to select the texts again. For your information, I just tested to select the texts and then pressed Ctrl, the problem happened. And then I tried pressing C and then others letters, it all led to the problem.
I guess I have to stick with left-clicked + Copy until I/someone figure the source of this problem. Thanks a lot for your help!

Problem with: select 'c' as X from dual

Problem with 'select 'c' as X from dual'
I get 2 different results when I execute the above with SQLPlus (or java) depending on the instance I am connected to. For one instance the result is a single character and for the other the character is padded with blanks to 32 chars in the SQLPlus window (and java). Does anyone know what database setting causes this to happen? Is it a version issue ?
Test #1: Oracle 9.2.0.6 - SQLPlus result is padded with blanks
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:27:58 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.6.0 - Production
SQL> select 'c' as X from dual;
X
c
SQL>
Test #2 Oracle 9.2.0.1 SQLPlus result is a single character.
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:29:27 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL> select 'c' as X from dual;
X
c
SQL>

Using 9.2.0.6 On AIX 5.2 I get the single byte result:
UT1 > select 'c' as X from dual;
X
c
If the databases are on different Oracle Homes you may want to check the sqlplus global logon files for any set commands.
If you executed the two sql statements from different OS directories you may also want to check your sqlpath for sqlplus .logon files.
Try issueing clear columns and repeating the statement. Are the results the same?
HTH -- Mark D Powell --

Problem in Selection Screen.

Dear Experts,
I am facing a problem in Selection Screen.
I have 2 radio buttons ,
Radio Button 1 - Choosing the file from desktop and
Radio Button 2 - Executing from Database
Under Option1 - i have a FILE parameter which is Mandatory.
Problem Case -
when I choose option 2, Option 1 should be disabled. in the sense the file name which is mandatory here should not be mandatory . Currently, when i choose option 2 - i have to provide some dummy characters in the file parameter because the file parameter is mandatory, and I want to avoid this.
Please see the entire code .
REPORT ZTEST.
DATA: LV_FILE_PATH(20) TYPE C.
DATA: LV_MASK(20) TYPE C VALUE ',*.XLS ,*.XLS. '.
*-- Macro to put radiobutton on selection screen
*-- &1 - radiobutton parameter name
*-- &2 - text element (description)
*-- &3 - radiobutton group
DEFINE MAKE_RADIOBUTTON.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: &1 RADIOBUTTON GROUP &3.
SELECTION-SCREEN COMMENT 3(60) &2.
SELECTION-SCREEN END OF LINE.
END-OF-DEFINITION.
SELECTION-SCREEN BEGIN OF BLOCK A0 WITH FRAME TITLE T000.
* From Config File
MAKE_RADIOBUTTON RB_1 ALL_DATA SRC.
SELECTION-SCREEN BEGIN OF BLOCK A1 WITH FRAME TITLE T001.
* Config file from Presentation server
PARAMETERS: P_FILE1 LIKE T390D-DBNAME OBLIGATORY. "
SELECTION-SCREEN END OF BLOCK A1.
* From database table
MAKE_RADIOBUTTON RB_2 INC_DOWN SRC.
SELECTION-SCREEN END OF BLOCK A0.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE1.
CALL FUNCTION 'WS_QUERY'
 EXPORTING
 QUERY = 'CD' "// Current Directory
 IMPORTING
 RETURN = LV_FILE_PATH.
CALL FUNCTION 'WS_FILENAME_GET'
 EXPORTING
 DEF_FILENAME = 'TA_DOWNLOAD.MDB'
 DEF_PATH = LV_FILE_PATH
 MASK = LV_MASK
 MODE = 'O'
 IMPORTING
 FILENAME = P_FILE1
 EXCEPTIONS
 INV_WINSYS = 1
 NO_BATCH = 2
 SELECTION_CANCEL = 3
 SELECTION_ERROR = 4
 OTHERS = 5.
INITIALIZATION.
ALL_DATA = 'From Desktop : ? '.
INC_DOWN = 'From Database : ?'.
T000 = 'Configuration Upload'.
Please help
Thanks

Hi
You should do some modifications like these:
DEFINE MAKE_RADIOBUTTON_1.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: &1 RADIOBUTTON GROUP &3 USER-COMMAND &4.
SELECTION-SCREEN COMMENT 3(60) &2.
SELECTION-SCREEN END OF LINE.
END-OF-DEFINITION.
DEFINE MAKE_RADIOBUTTON_2.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: &1 RADIOBUTTON GROUP &3.
SELECTION-SCREEN COMMENT 3(60) &2.
SELECTION-SCREEN END OF LINE.
END-OF-DEFINITION.
SELECTION-SCREEN BEGIN OF BLOCK A0 WITH FRAME TITLE T000.
From Config File
MAKE_RADIOBUTTON_1 RB_1 ALL_DATA SRC AAA.
SELECTION-SCREEN BEGIN OF BLOCK A1 WITH FRAME TITLE T001.
Config file from Presentation server
PARAMETERS: P_FILE1 LIKE T390D-DBNAME MODIF ID FIL. "
SELECTION-SCREEN END OF BLOCK A1.
From database table
MAKE_RADIOBUTTON_2 RB_2 INC_DOWN SRC.
SELECTION-SCREEN END OF BLOCK A0.
AT SELECTION-SCREEN OUTPUT.
IF RB_2 = 'X'.
 LOOP AT SCREEN.
 IF SCREEN-GROUP1 = 'FIL'.
 SCREEN-ACTIVE = 0.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ENDIF.
Max

Performance problem with selecting records from BSEG and KONV

Hi,
I am having performance problem while selecting records from BSEG and KONV table. As these two tables have large amount of data , they are taking lot of time . Can anyone help me in improving the performance . Thanks in advance .
Regards,
Prashant

Hi,
Some steps to improve performance
SOME STEPS USED TO IMPROVE UR PERFORMANCE:
1. Avoid using SELECT...ENDSELECT... construct and use SELECT ... INTO TABLE.
2. Use WHERE clause in your SELECT statement to restrict the volume of data retrieved.
3. Design your Query to Use as much index fields as possible from left to right in your WHERE statement
4. Use FOR ALL ENTRIES in your SELECT statement to retrieve the matching records at one shot.
5. Avoid using nested SELECT statement SELECT within LOOPs.
6. Avoid using INTO CORRESPONDING FIELDS OF TABLE. Instead use INTO TABLE.
7. Avoid using SELECT * and Select only the required fields from the table.
8. Avoid nested loops when working with large internal tables.
9. Use assign instead of into in LOOPs for table types with large work areas
10. When in doubt call transaction SE30 and use the examples and check your code
11. Whenever using READ TABLE use BINARY SEARCH addition to speed up the search. Be sure to sort the internal table before binary search. This is a general thumb rule but typically if you are sure that the data in internal table is less than 200 entries you need not do SORT and use BINARY SEARCH since this is an overhead in performance.
12. Use "CHECK" instead of IF/ENDIF whenever possible.
13. Use "CASE" instead of IF/ENDIF whenever possible.
14. Use "MOVE" with individual variable/field moves instead of "MOVE-
CORRESPONDING" creates more coding but is more effcient.

A problem highlighting/selecting text in Illustrator CS3

In several instances I can't highlight text to copy or to edit, other times it works fine. If I click the radio button for the text in layers (other layers may be locked to prevent accidental selection), the baselines appears and I should be able to highlight the text, but I can't. If I highlight some other unaffected area of text successfully (unlocked layers), sometimes it will allow me to select the problem text directly after. Then it will go back to being a problem, why?

I'm using the general text tool, I've locked the other sublayers to avoid accidentally selecting those items. Then I click the radio button on the sublayer I wish to edit or copy, which reveals the baselines. Then if I click within that object to highlight text with the cursor, the text tool creates a new textbox/sublayer and does not highlight the text I intended.
From: Monika Gause <[email protected]<mailto:[email protected]>>
Reply-To: <[email protected]<mailto:[email protected]>>
Date: Wed, 26 Oct 2011 14:49:40 -0600
To: Roger Daleiden <[email protected]<mailto:[email protected]>>
Subject: A problem highlighting/selecting text in Illustrator CS3
Re: A problem highlighting/selecting text in Illustrator CS3
created by Monika Gause<http://forums.adobe.com/people/Monika+Gause> in Illustrator - View the full discussion<http://forums.adobe.com/message/3992086#3992086

Problem with Select

Hi All,
I am Facing one problem in select query. My requirement is as follows.
User Screen will Have 4 Fileds.
Country Code, Zip Code From, Zip Code To, Delivery Area.
All are Parameter's only.
For Example ZTABLE having below Entries.
US 12345-6787 12345-6789   AKRON             AKRON/CANTON
Once User try to create new entry by Click on SAVE, Below Possiblities are there.
Case 1: US 12345-6787 12345-6789   AKRON             AKRON/CANTON ( Error Message)
Case 2: US 12345-6786 12345-6787   AKRON             AKRON/CANTON ( Error Message)
Case 3: US 12345-6789 12345-6790   AKRON             AKRON/CANTON ( Error Message)
Case 4: US 12345-6789 12345-6790   AKRON             AKRON/CANTON ( Error Message)
Case 5: US 12345-6786 12345-6787   AKRON             AKRON/CANTON ( Error Message)
Case 6: US 12345-6785 12345-6786   AKRON             AKRON/CANTON ( Record Need To Insert)
Case 7: US 12345-6785 12345-6785   AKRON             AKRON/CANTON ( Record Need To Insert)
Case 8: US 12345-6790 12345-6790   AKRON             AKRON/CANTON ( Record Need To Insert)
Case 9: US 12345-6790 12345-6791   AKRON             AKRON/CANTON ( Record Need To Insert)
Case 10: US 12345-6788 12345-6788   AKRON             AKRON/CANTON ( Error Message)(This Condition is Failing)
Case 11: US 12345-6788 12345-6789   AKRON             AKRON/CANTON ( Error Message)(This Condition is Failing)
In the above cases 10 and 11 is failing.
I am using the below select statment.
SELECT SINGLE * FROM zdt_sd_dlv_zcode   WHERE mandt = sy-mandt
                                          AND land1 = g_land1
                                          AND ( post_code_from GE g_pbox_from AND post_code_from LE g_pbox_to )
                                          OR ( post_code_to GE g_pbox_from AND post_code_to LE g_pbox_to ).
Friends can anyone give me some valuable inputs to solve this problem.
Points will reward.
Thanks in Advance,
Srinivas.

Please use Select-options instead of Parameters so that you can use complex "and" and "or" in your select statements.
for eg:if you are declaring parameters like this below.
parameters post_code1 LIKE adrc-post_code1.
change to
select-options post_code1 for adrc-post_code1 no intervals.
siddu

Problem with select all cells in JTable

Hi guys! I get some problem about selecting all cells in JTable. I tried to used two methods:
1> table.selectAll()2> changeSelection(firstcell, lastcell,false,true)
firstcell:[0,0], lastcell[rowcount-1,colcount-1]
Result: only the first row selected when i use both methods.
Note: i set up the selection model as following:
this.dataSheet.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
 this.dataSheet.setCellSelectionEnabled(true);
 this.dataSheet.setRowSelectionAllowed(true);
 this.dataSheet.setColumnSelectionAllowed(true);Thanks !

What selection properity should be changed in order to enable selectAll() method work properly? Is there Any constraints? Here is the TableModel I am using. And i set up selection mode use the following code:
table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
table.setCellSelectionEnabled(true);
table.setRowSelectionAllowed(true);
table.setColumnSelectionAllowed(true);
import java.util.Vector;
import javax.swing.table.*;
import javax.swing.JTable;
public class DataSheetModel extends AbstractTableModel{
 private Vector data = new Vector();//Store data
 private Vector columnNames = new Vector();//Store head
 public DataSheetModel(){}
 public DataSheetModel(Vector headVector, Vector dataVector){
 if(headVector != null) this.columnNames = headVector;
 if(dataVector != null) this.data = dataVector;
 public int getColumnCount(){
 return columnNames.size()+1;
 public int getRowCount(){
 return data.size()+1;
 public String getColumnName(int col){
 if(col==0) return "";
 else return (String)columnNames.get(col-1);
 public Object getValueAt(int row, int col){
 if(col==0) {
 if(row != data.size()) return String.valueOf(row);
 else return "*";
 else{
 if(row != data.size()){
 Vector rowVector = (Vector)data.elementAt(row);
 return rowVector.elementAt(col-1);
 }else return null;
 public void setValueAt(Object value, int row, int col){
 if(row != this.data.size()){
 Vector rowVector = (Vector)data.elementAt(row);
 rowVector.set(col-1,value);
 this.data.set(row,rowVector);
 this.fireTableDataChanged();
 }else{
 Vector rowVector = new Vector();
 for(int i=0; i<this.getColumnCount()-1; i++) rowVector.add(null);
 rowVector.set(col-1,value);
 this.data.add(rowVector);
 this.fireTableDataChanged();
 public Class getColumnClass(int c){
 return getValueAt(0,c).getClass();
 public boolean isCellEditable(int row, int col){
 if(col == 0) return false;
 else return true;
 public void setDataVector(Vector head, Vector data){
 if(head != null) this.columnNames = head;
 if(data != null) this.data = data;
}

I have a problem in select-options

hi frns,
 i am facing a big problem in select-options
the requirement is such that
i have 2 select-options
one for matnr and the other for maktx
so wen the clent select matnr with f4
in the maktx the similar description should come by using f4
pls help me out

hi,
TYPES DECLARATION
types: begin of tp_marc,
 matnr type marc-matnr,
 werks type marc-werks,
 end of tp_marc.
INTERNAL TABLE AND WORK AREA DECLARATION
data: t_marc type standard table of tp_marc,
 wa_marc type tp_marc.
data : dd like table of dselc with header line. "*--- IMPORTANT
data : ft like table of dfies with header line.
data : t_makt like table of makt with header line.
parameters : matnr like makt-matnr .
parameters : maktx like makt-maktx.
at selection-screen output.
loop at screen.
 if screen-name = 'MAKTX'.
 screen-input = 0.
 modify screen.
 endif.
endloop.
at selection-screen on value-request for matnr.
SELECT matnr maktx FROM makt INTO TABLE makt up to 500 rows.
select *
 from makt
 up to 500 rows
into table t_makt
where spras = syst-langu.
if sy-subrc <> 0.
 message 'INVALID MATERIAL NUMBER' type 'E'.
endif.
IMPORTANT
refresh dd.
dd-fldname = 'MATNR'.
dd-dyfldname = 'MATNR'.
append dd.
dd-fldname = 'MAKTX'.
dd-dyfldname = 'MAKTX'.
append dd.
*------- IMPORTANT
refresh ft.
ft-tabname = 'MAKT'.
ft-fieldname = 'MATNR'.
append ft.
ft-tabname = 'MAKT'.
ft-fieldname = 'MAKTX'.
append ft.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
ddic_structure = 'T001' "*----- IMPORTANT IF STANDARD STRUCT
retfield = 'MATNR'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'MATNR'
value_org = 'S'
tables
field_tab = ft "*---- IMPORTANT
value_tab = t_makt
dynpfld_mapping = dd "* IMPORTANT
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
start-of-selection.
select matnr
 werks
 from marc
 into table t_marc
 where matnr = matnr.
if sy-subrc <> 0.
 message :'no results IN MARC' type 'E'.
endif.
write: at 1(36) sy-uline.
format intensified on color = 7.
new-line.
write :sy-vline,at 10 'MATERIAL NUMBER',at 29 sy-vline, at 30 'PLANT',sy-vline.
new-line.
write: at 1(36) sy-uline.
format intensified off color = 4.
loop at t_marc into wa_marc.
 new-line.
 write :sy-vline,at 10 wa_marc-matnr ,sy-vline, at 30 wa_marc-werks, at 36 sy-vline.
endloop.
new-line.
write: at 1(36) sy-uline.
reward points if useful.
regards,
Vinod Samuel.

Problem in selecting records

Hi, everyone.
I have a problem in selecting records. In this case, I want to select records from database
LFA1,and the components of this table are LIFNR,ERDAT,LOEVM ,and so on.The type of LIFNR is char(10).There is a internal table:tab_cdhdr , the elements of tab_cdhdr are: objectid,udate and change_ind.The type of objectid is char(50).
And the select-rule is that: LIFNR = objectid. So I write like this:
select   lifnr
             erdat
             loevm
form     lfa1
into       tab_lfa1
for all entries in tab_cdhdr
where   lfa1 = tab_cdhdr-objectid+0(10).
But there is a warning: When using FOR ALL ENTRIES IN the specifyed length for "OBJECTID" is ignored in this condition.
Can you help me to solve this problem?
Thanks.

Hi Feng..
If you dont want to change the Internal table TAB_CDHDR, Then declare another internal table (TEMPTAB_CDHDR.) with the same structure but Objectid with only 10 chars.
IF TAB_CDHDR[] IS NOT INITIAL.
LOOP AT TAB_CDHDR.
MOVE-CORRESPONDING TAB_CDHDR TO TEMPTAB_CDHDR.
APPEND TEMPTAB_CDHDR.
ENDLOOP.
select lifnr
erdat
loevm
form lfa1
into tab_lfa1
for all entries in tab_cdhdr
where lfa1 = TEMPtab_cdhdr-objectid.
ENDIF.
Sure ... this will work for u.....
REWARD IF HELPFUL.

Problem using 'selected' attribute of dropDown component

Valid Assumptions:
1. Developer is not a novice
2. Problem has been verified by third party
3. Using Netbean 5.5 plus Visual Web Pack 5.5
Problem:
The 'selected' attribute of the webuijsf:dropDown throws 'Component Error'
<webuijsf:dropDown... selected="#{address$CreateUI.addressFormBean.accessLevel}" />where:
a. 'selected' is the object that represents the selection made from the available options
b. 'accessLevel' is java.lang.String with get/setter methods
ERROR:
javax.el.ELException: javax.faces.el.PropertyNotFoundException: javax.el.PropertyNotFoundException: Target Unreachable, 'addressFormBean' returned null
 at javax.faces.component.ValueExpressionValueBindingAdapter.getType(ValueExpressionValueBindingAdapter.java:129)
 at com.sun.webui.jsf.util.ValueTypeEvaluator.evaluateValueBinding(ValueTypeEvaluator.java:138)
 at com.sun.webui.jsf.util.ValueTypeEvaluator.evaluateValueType(ValueTypeEvaluator.java:111)
 at com.sun.webui.jsf.util.ValueTypeEvaluator.getValueType(ValueTypeEvaluator.java:90)
 at com.sun.webui.jsf.util.ValueTypeEvaluator.getValueType(ValueTypeEvaluator.java:67)
 at com.sun.webui.jsf.component.ListSelector.processSelections(ListSelector.java:278)
 at com.sun.webui.jsf.component.ListSelector.getListItems(ListSelector.java:122)
 at com.sun.webui.jsf.renderkit.html.ListRendererBase.renderList(ListRendererBase.java:376)
 at com.sun.webui.jsf.renderkit.html.ListRendererBase.renderListComponent(ListRendererBase.java:168)
 at com.sun.webui.jsf.renderkit.html.DropDownRenderer.encodeEnd(DropDownRenderer.java:78)
 at com.sun.webui.jsf.renderkit.html.AbstractDesignTimeRenderer.encodeEnd(AbstractDesignTimeRenderer.java:40)
 at com.sun.webui.jsf.renderkit.html.SelectorDesignTimeRenderer.encodeEnd(SelectorDesignTimeRenderer.java:131)
 at javax.faces.component.UIComponentBase.encodeEnd(UIComponentBase.java:848)
 :Thanks in advance.

What object type for dropdown's items? selected property's type has to match dropdown's value.

Problem in selecting my Applet from apdutool input script

Hi...
I am havivg problem in selecting my Applet from apdutool input script . It always sending status reponse of 6D00... Plz help...
I am very new to Java card....
When ever my selecting installer applet its working fine ....status reponse 90 00....
thanz in Advance

Hi, i'm having the same problem with my applets, i can't resolve this problem, pleace help us

Interface Builder: Problems with selecting items?

Hello, does someone else have experience with IB selection problems?
I did the following:
-Created a textured window
-Dragged a toolbar into it
-Dragged a NSScrollView into the textured window
-Gave the NSScrollView a white background
-Scaled the NSScrollView so that it extended to the edges of the window
-Dragged 4xCheckboxes into the NSScrollView
After this I had major problems in selecting any of the Checkboxes. It seemed like if I moved the mouse around a bit and kept clicking, then in some point I was able to get the checkbox selected. However this happened only after 5-30 clicks. Also the scaling controls of the checkboxes were almost impossible to find and to use.
Is there a button or a checkbox in the IB configuration, or a keyboard key or something in the IB that would make selecting things a bit easier. Or am I just doing something wrong?

Interface Builder is pretty buggy to begin with, so that is always going to be a hassle. You normally have to double-click inside scroll views to get to the actual contained items. Also, you can drill down through the scroll view in the object window in tree view and select the checkbox itself.

Problem about selecting waveform in waveform graph

Hi all:
I am developing a project by Labview. Now I meet a problem about selecting the waveform in the waveform graph.
I am not sure whether it is possible about my idea.
for example:
In the waveform graph, the different waveforms from a couple of channels are displayed. and then I want to select one waveform of them, and corresponding data about this waveform are shown.
Thanks so lot
regards

hanwei wrote:
1. can I zoom in and out in that "waveform graph"??
You can do this using the graph palette. Just make it visible. The middle control allows you to zoom.
2. can I display the plot array or plot index that I select in the waveform graph?
You can connect the same wire that goes to the ActivePlot property node to an indicator.
3. I build a sample codes for my project, in which , I used a random number generater to simulate a DAQmx data collection, and generate a overlapping waveform in the waveform graph.
but it seems the program is not stable, when i first run the codes, it is ok, and I can select the plot what I want. but after I stop and restart the program, there is error message about "Property Node".
it seems something wrong about the "waveform graph properties"
I attached my codes here, anybody know what wrong about it?
For some strange reason the property node is "messed up". I've seen this happen sometimes with graphs. I don't know what causes it, and the only way I've found to fix the problem is to delete the graph, put a new one on the front panel, and recreate the property nodes. I've typically seen this happen when copying code from another VI that has a graph with property nodes, as I suspect you did. If you delete the graph, put a new one on there, and recreate the property node you should be OK.
That said, a few comments regarding the code:
The architecture seems to be a mish-mash of operations, and I'm thinking that you probably want to look at using a producer-consumer architecture. Your producer loop responds to events, and the consumer loop does your DAQ collection.
You have a race condition with your use of the "size(s) 2" local variable.
Avoid right-to-left wires.
The method of creating your arrays seems convoluted. However, since you said you will actually be getting the data from a DAQ system, the actual project code will likely be considerably different.

Problem in select

Similar Messages

Maybe you are looking for