Problem in sending data through email in brodcasting

HI All
i am trying to send the data through email in the broadcasting. but as i execute the broadcasting the message comes
"Online processing is not possible for user 1"
further its is saying
"You want to execute a broadcast setting online. Processing this setting requires switching to another user (for example, with the user-specific precalculation of Web templates for a user other than your user). This is only possible in background processing."
but i dont know how to login as seperate user. as i have to send the data through my login and not someone else.
Hope i am clear.
Please help me on this its very urgent
Thanks

The solution to this problem is that:-
1. this is not an error
2. it gives the warning beacuse we cannot execute the broadcast setting at that moment (with different users in reciepient list) i.e. we have to schedule the broadcast settings.
Thanks
Prat

Similar Messages

Problems in Sending Data through JMS Bridge - WLS 10.3 to WLS 11g

I have a scenario where I need to send data from a queue configured on WLS 10.3 to WLS 11g. I am using OSB on WLS 10.3.
What I have done is
1. Created a JMS Based BS in OSB which sends data to jms://localhost:7001/ConnFactoryJNDI/QueueJNDI
2. Created a JMS Bridge on WLS 10.3
3. Source Destination has been configured as the one mentioned above.
4. Target Destination has been configured to a queue on WLS 11g.
When i execute the JMS Based BS in OSB, data is being written to the Source Queue directly. I am not sure of the JMS Bridge functionality but I assume that once data is written to the Source Destination, that data will be automatically pushed on the target destination.
I have configured a JDBC store for the target queue but I no table is created with the data sent from the source.
M i missing something here?

I think this question belongs to weblogic server, but as far as I know bridge should be created always at higher version. means, you should create bridge at 11g and try to pull/drop data from 10g. To check any errors in bridge, check the server log and make sure status of bridge is "forwarding messages"
Regards,
Anuj

About how to send ALV through email

Hi everyone ,
I have a problem about how to send ALV through email in background . if someone knows , pls tell me .
thanks in advance
Best Regard
Nick

I write a test program , but it doesn't work , use any exists ALV program in the system , and use the "sendlist " program to send the email. what I want is when I restrict some conditons in the selection-screen , then it send ALV to Email .
Thanks
Nick

Unable to send photo through email using iphoto theme (designs)

Unable to send photo through email using iPhoto theme (designs) using the SHARE button.
Error message:
Your email did not go through because the server did not reply.
Check your Internet connection.
If the connection is working properly, the email server may be down.
Try sending your email again later.

Your email did not go through because the server did not reply.
Check your Internet connection.
If the connection is working properly, the email server may be down.
Try sending your email again later.
Are you using Yosemite and not apple's Mail app? Then you may need to set up an app-specific password: See the post below:
Re: I am using iPhoto version 9.6 and I can no longer get an email sent with a photo attached. I get an error message saying the email did not go through because the server did not reply. I can send the photo with Mail. Help!in response to Gary Kissler
This solution is for those of you using 2-step verification for your Apple ID and are using iCloud as the mail server that you are trying to mail photos with.
I too had this issue. The problem in my case occurred because I had setup 2-step authentication for my Apple ID. If you have done this then you will get the error message "the mail server did not recognize your email/password...". To solve the problem go to:
https://appleid.apple.com
Click "Manage Your Apple ID"
Verify your identity with the device you selected (if this step does not show up then you have not likely set up 2-step authentication and this is not your solution)
Click Password and Security in the left column
Click Generate an app-specific password
Enter iPhoto as the name of the app
Copy the password and paste this into the password box in iPhoto where you would normally enter your apple ID (in the mail account section in iPhoto preferences).
And...voila' (I hope)

Problem in sending data to parallel port

Hello,
I can open a parallel port (LPT1) using java comm api i,e javax.comm.
but problem in sending data to parallel port,
I choose the appropriate port(LPT1), it is in bi-directional mode according to BIOS configuration.
but according to the java program the mode is SSP.
when i write data to parallel port the volt-meter give a reading of high state for all data pin (pin1 to 9) i,e the parallel port doesnot change state. I am using windows XP.
What is the solution?

try it on Open Solaris 10 or Linux platform.
also just try using the new FileWriter("LPT1").write("Hello");
on windows platform
Pravin

Problem in sending mail through dynamics actions

Hi Friends,
I have a problem in sending mail through dynamics actions . In this we pass a subroutine in dynamics actions which send an mail when promotion action occured.
Problem is that sometimes it will send an mail or sometimes not. I have no idea to solve this problem.
Can anyone suggest me .
Thanks ,
Anish
Moderator message : Duplicate post locked.
Edited by: Vinod Kumar on Sep 5, 2011 9:45 AM

Hi,
Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
thank You

How to send invoice through email with output type RD00?

What are the configuration settings to send invoices through email with output type RD00?

Hi,
Please go through the following links:
[E-mail|Email Configuration Settings]
[e-mail|Re: EMAIL BILLING DOCUMENT TO CUSTOMER THROUGH SEND MAIL OPTION IN VF02]
After triggering the output,goto T.Code SOST and process it.
So that e-mail will be triggered immediately.
You can use External send/EDI/simple mail for this.
Regards,
Krishna.

Sender sending data through XML, How to process it in ECC (No PI involve)?

Hi,
The sender system sending data through XML tag and that need to be processed in SAP side.
How it can be done without involving XI or IDoc?
Is it possible through HTTP post?
Sample XML Transactions
1. SAP Availability Transaction (Request)
<?xml version="1.0" standalone="yes"?>
<ECCAVAILREQUEST>
<AVAILTEXT>CHK STATUS</AVAILTEXT>
</ECCAVAILREQUEST>
2. SAP Availability Transaction (Response)
<?xml version="1.0" standalone="yes"?>
<ECCAVAILRESPONSE>
<AVAILTEXT>OK</AVAILTEXT>
</ECCAVAILRESPONSE>
3. DUMMY_SYSTEM PO Transaction (Request)
<?xml version="1.0" standalone="yes"?>
<DUMMY_SYSTEM REQUEST>
<CREATEPB>1</CREATEPB>
<POORDERDATA>
05607015156070151TORDAEHTWW05727500002D0979054+
</POORDERDATA>
4. DUMMY_SYSTEM Order/Inquiry Transaction (Response)
<DUMMY_SYSTEM RESPONSE>
<C_PO>99999</C_PO>
<RETURNDATA>
DAT

</RETURNDATA>
</DUMMY_SYSTEM RESPONSE>

Hi,
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/21/e9c97ceb1911d6b2ea00508b6b8a93/content.htm
this is for processing inbound IDOc through XML-HTTP(Inbound) port
like this there should be an option for reading files placed by HTTP_POST.
in SICF transaction there should be a service to do that.
defaulthost -> sap-> xi-> adapter_plain. i know you don't have XI in your landscape but this is the component which be responsble for receving messages over HTTP_POST.
look for a program which can access messages from there.
please check with your basis team
Suresh

Error 400 - cant send photos through email

I have windows 7 home premium, and can not send pictures through email. I keep getting an error 400, and called in but was sent to Revel. I use photoshop elements 9, and can not send any pictures. Any Ideas?
Thank You
DebbyC

http://helpx.adobe.com/photoshop-elements/kb/error-400-logging-photoshopcom-services.html
With PSE 9, you can't use revel from within PSE.

How to rollback a traansacation if we got any problem while sending data to

how to rollback a traansacation if we got any problem while sending data to a webservice...

Is it SOA or OSB? Which version you are in..

After updating to the new ios5 with my 4S , no wifi connection (at home), problem when sending or receiving email

After updating to the new ios5 with my 4S, no wifi connection and problem when sending or receiving email. I had no issue before the update... I am very disappointed

Did you already try to reset your network settings in Settings/General/Reset?

Problem in sending data to BW through XI

Hi all,
I am using "How to..push data to BW from XI".
There a javascript code is given for sending data to BW using XI.
But when I use that code for sending XML file it is showing a java script error:"Automation server can't create object".
I think it has something to do with ADODB.Stream object.
As given in the microsoft document I have deleted the registry entry which disables ActiveX component ADODB.Stream object.
Even then it is showing the same error.
Can someone figure out what is the problem.
Any help will be appreciated.
Regards,
Anand

Hi Anand,
        Sure, first i tried to send hardcoded data by using a report in bw, and refering the classes from transaction sproxy.
The code was:
REPORT ZZ_TEST_XI_POC.
*& Report ZZ_TEST_XI_POC
*& start of code by Anirban Ghatak , 14/03/06
*& This Report will send data to sap xi
*& start of code by Anirban Ghatak , 14/03/06
DATA prxy TYPE REF TO ZPUSHCO_PROXY_INTERFACE_OB.
CREATE OBJECT prxy.
DATA it TYPE ZPUSHPUSH_TABLE1.
TRY.
    it-PUSH_TABLE-EMP_NO = 'Anirban'.
    it-PUSH_TABLE-EMP_NAME = '393'.
    it-PUSH_TABLE-DEPARTMENT_NAME = 'NetWeaver'.
    CALL METHOD prxy->execute_asynchronous
      EXPORTING
        output = it.
     commit work.
CATCH cx_ai_system_fault .
    DATA fault TYPE REF TO cx_ai_system_fault .
    CREATE OBJECT fault.
    WRITE :/ fault->errortext.
ENDTRY.
*& End of code by Anirban Ghatak , 14/03/06
then execute it , this sends data to xi.
Refer /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
this can send data from bw to xi.
Try have a look and see if you can replicate, actually mine is a POC so i have a little bit of flexibility but if you are working on a live devlopement reconsider the solution.
Anirban.

J2ME app.: To update Oracle table by sending data through mobile phone

Hello all,
I want to develop a mobile app to update the table of oracle database by sending the data through the SMS (Short Message Service). Means I'll send a sms through my cellphone containing some data and this data will be used to update the remote oracle database. How to do that?. Plz help.
Thanx in advance.

hi
My problem is here I need to update the loginfo table with the file name, count of records, table name and datetime.
For instance my dat file is XX.dat
my database table name is Mytable
Total record count is 10,00,000 records
datetime as on this date
the data in the XX.dat file I am using the controlfile (SQL*loader and dumping into the Mytable.Now my 10,00,000 records are dumped into the Mytable.
This process information I want to store it in the loginfo table. For this I need the trigger
CREATE OR REPLACE TRIGGER MYTRIGG
AFTER INSERT ON MYTABLE
Declare
V_Count Number;
Begin
Select count(*) into V_Count from Mytable;
Insert into Loginfo(TotalRecords,Date)
Values(V_Count,Sysdate);
end;
This is the trigger I have used.But in my loginfo table instead of one value as 10,00,000 it is getting each record as row by row
1
4
100
1000
10,00,000
So I need only one value to be stored and at the same time my tablename and filename must also be stored.
Kindly help me
suroop

Sending data through a serial write box (vision processing)

Hi there, I am fairly new to labview and vision assistant. I was wondering if I could get some assistance on a particular problem we are having with our project. The idea is that we will use a webcamera to analyze a continuous loop of images and identify shapes, then send the data through the serial port to a controller which uses the mint motion language. The problem we are having is we cant sind a way to send the data we are getting from particle analysis to the serial port. Is there any way we can do this? I would be eternally grateful for any kind of pointers!
I will attach the write to box we are using right now as well as the program itself
Attachments:
bild.vi ‏104 KB
SKRIV2BOX.VI ‏31 KB

What you are searching for are the functions "Flatten To String" and "Unflatten from String".
Attachments:
FlattenToString - UnflattenFromString.vi ‏16 KB

Sending smartform through email as PDF attachment

Hi,
I want to send a smartform through email as pdf attachment.In the code I have hardcoded the receiver mail id.But I don't want this to be sent only to a particular receiver.I want this to be sent as many people as I can without hardcoding their mail id's in the program.How can I do that?
Regards,
Hema

**Data Declarations
**Internal Table
DATA : BEGIN OF it_spfli OCCURS 0,
          carrid LIKE spfli-carrid,
          connid LIKE spfli-connid,
       END OF it_spfli.
DATA:   it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        it_contents     LIKE solisti1 OCCURS 0 WITH HEADER LINE,
storing receivers
        it_receivers    LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
**storing file attachment data
        it_attachment   LIKE solisti1 OCCURS 0 WITH HEADER LINE,                    gd_doc_data     LIKE sodocchgi1,
        gd_error        TYPE sy-subrc,
        l_gntxt         LIKE t357g_t-gntxt,
        lv_message(100) TYPE c.
DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE. "storing mail body
DATA : psubject(30) TYPE c VALUE 'Sample Mail'. "subject of the mail
DATA : ld_format TYPE so_obj_tp , "file format
       ld_attfilename TYPE so_obj_des, "file name
       w_cnt TYPE i.
**Selecting the data
SELECT carrid connid INTO TABLE it_spfli FROM spfli WHERE carrid EQ 'AA'.
**Perform for populating mail body
PERFORM populate_message.
**Perform for populating file attachment
PERFORM populate_attachment.
**Perform for populating mail characteristic info
PERFORM populate_pack.
**Perform for populating receivers
PERFORM populate_receivers.
**Perform to send mail
PERFORM send_mail.
*&      Form populate_message
      text
--> p1        text
<-- p2        text
FORM populate_message .
**Populating the body
lv_message = 'Sample mail for testing purpose.'.
APPEND lv_message TO it_message.
ENDFORM.                    " populate_message
*&      Form populate_attachment
      text
--> p1        text
<-- p2        text
FORM populate_attachment .
**Populating the attachment file with the data from final intenal table
CONCATENATE 'CARRIER ID'
              'CONNECTION ID'
              INTO it_attachment SEPARATED BY
              cl_abap_char_utilities=>horizontal_tab.
CONCATENATE cl_abap_char_utilities=>cr_lf it_attachment INTO
it_attachment.
APPEND it_attachment.
LOOP AT it_spfli.
    CONCATENATE it_spfli-carrid it_spfli-connid INTO it_attachment SEPARATED BY
             cl_abap_char_utilities=>horizontal_tab.
    CONCATENATE cl_abap_char_utilities=>cr_lf it_attachment INTO
    it_attachment.
    APPEND it_attachment.
ENDLOOP.
ENDFORM.                    " populate_attachment
*&      Form populate_receivers
      text
--> p1        text
<-- p2        text
FORM populate_receivers .
**Populating Mail Recepients
**If there are more than one mail recepient then loop and append them to it_receivers
it_receivers-receiver = '[email protected]'.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
it_receivers-express = 'X'.
APPEND it_receivers.
ENDFORM.                    " populate_receivers
*&      Form populate_pack
      text
--> p1        text
<-- p2        text
FORM populate_pack .
**File Type
ld_format = 'XLS'.
**File Name
ld_attfilename = 'File1'.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject .
gd_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR gd_doc_data.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
READ TABLE it_attachment INDEX w_cnt.
gd_doc_data-doc_size = ( w_cnt - 1 ) * 255 + STRLEN( it_attachment ).
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
CLEAR it_packing_list.
REFRESH it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
APPEND it_packing_list.
**Describe the attachment info
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_attachment LINES it_packing_list-body_num.
it_packing_list-doc_type = ld_format.
it_packing_list-obj_name = ld_attfilename.
it_packing_list-obj_descr = ld_attfilename.
it_packing_list-doc_size = it_packing_list-body_num * 255.
APPEND it_packing_list.
ENDFORM.                    " populate_pack
*&      Form send_mail
      text
--> p1        text
<-- p2        text
FORM send_mail .
**Function Module to send mail
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = gd_doc_data
      put_in_outbox              = 'X'
      commit_work                = 'X'
    TABLES
      packing_list               = it_packing_list
      contents_bin               = it_attachment
      contents_txt               = it_message
      receivers                  = it_receivers
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
ENDFORM.                    " send_mail

Problem in sending data through email in brodcasting

Similar Messages

Maybe you are looking for