Problem in sending mails to few users on outlook DL - ALRTCATDEF txn

Hi Experts,
     We are implementing mail functionality such that few people will be intimated whenever there is an error in order creation. We implemented this functionality through ALRTCATDEF by maintaining the list of users , under fixed recipients tab, with valid mail ids assigned  in SU01 transaction.
    Now, we have replaced all those users list with a generic user who had an outlook Distribution List's mail id assigned in su01 Txn.
    Instead of sending mails to the whole list of users on that DL, mails are being sent only to two persons on that DL . ( there are around ten users on that outlook DL and all those users have valid mails ids assigned in su01 txn).
   Can you please help us in resolving the issue so that mails will be sent out to all the users on that DL.
    Your inputs are highly appreciated.
Regards,
Kamaraj Sandeep.

Problem solved.
Earlier DL was maintained as a fixed recipient but for a wrong alert category and so mails were not sent to the DL members.
Just for infomation,
Even though SAP is showing that mails are sent to the DL successfully, mails were not dfeliverd to the DL and this issue was solved by changing a property of DL by unchecking the option "Require that all senders are authenticated" under Mail flow settings tab -> Message Delivery Restrictions.
Regards,
Kamaraj Sandeep.

Similar Messages

  • Send mail to multiple users in outlook through workflow

    Hello Experts,
    I have a requirement where I have to fetch all the email ID (abc@companycom) under support team in an org unit and send mail to these multiple email ids when a support message ticket is created in transaction CRMD_ORDER.The BO for this is bus2000116.Now I have created a ZBO with supertype as bus2000116 and a custom method where I am fetching the email Ids.I have also created an EXPORT MULTILINE parameter (EMAIL_ID) for this method of type ADR6-SMTP_ADDR.I have tested this ZBO and it is correctly fetching all the email ID in this parameter.
    Now in my workflow builder,I have created a Activity type and here I have created a custom task calling my ZBO and custom method of fetching email id.I have also created a container(EMAIL_ID) for this task of type ADR6-SMTP_ADDR.Here I have binded the task(fetch email step) to workflow.In the Agents I have given &&EMAIL_ID&& in expression as this is the container.
    After this step I have added the mail step and in the reciepient type I have given G organizational object and expression as &EMAIL_ID&.Here I have added a standard task(TS45308726) with BOR as (SELFITEM and method as SENDTASKDESCRIPTION)for sending mail to these multiple ids to outlook.
    I have activated the builder and tested it.In the log I can see,the event has been triggerred,workflow is started,but workflow status is set to error.The step fetch mail is getting executed correcttly with 4 email ids in the container.and the third step send mail is also failed.giving error as "Work item 000000066700: Object 000000066700 method SENDTASKDESCRIPTION cannot be executed".
    Kindly give your valuable suggestions to rectify this issue.In SBWP i could see the workflow started but mails are not reaching my outlook.Your solution will be highly appreciated.
    Thanks & Regds
    vlp

    Hello Everyone,
    I have another issue.My workflow when directly executed sends mail to all users very quickly.All steps gets executed very quickly.This I could see through the workflow log and SOST and SCOT.But when I try to trigger the workflow through my transaction CRMD_ORDER(i have given proper BO and event) it is taking hours and still in Inprocess status.Infact its not even going to the first step(fetch email ids).
    I am totally confused on this behaviour.Kindly provide your ultimate solutions and I am very thankful for giving such good solutions to all my queries.
    Regds
    VLP

  • Problem: Cannot send mail unless Password is transmitted insecurely & Port is set to 587.. Can receive mail but can't send..

    Problem: Cannot send mail unless Password is transmitted insecurely & Port is set to 587.. Can receive mail but can't send Code 501..
    Need help with T-bird.. My OS is Win XP-64..Have been using Mozilla for about 10 years with little or no problems.. This happened when I upgraded to 3.17.. Spent hours on T-Bird diagnostics web site.. Called Comcast & talked to a net tech.. he ran some tests on his end & had me log into my Comcast e-mail account & all worked well,, so he concluded the problem was in T-Bird.. He had me change my port to 587 & disable connection security & authentication to none & I was able to send mail.. That was all he could do.. Comcast was working.. the problem is in T-Bird.. Can any one help with this problem.. I don't want to send mail with my password transmitted insecurely..
    Thanks
    Richard

    It was not intended to be "snide". You said two separate things that at face value would be out of the ordinary.
    I considered if it might be a typo for 31.7. Since 31.5 is the current formal release, I would have to thank you for volunteering to test a pre-release beta version. If it was truly 3.1.7 then it would appear that you have chosen, or have become stuck with a somewhat ancient version. In either case it's harder to reach out to you with any meaningful comments or advice. However I do watch various other sites and newsgroups and I don't see a clamour of distressed users, so it seems fair to suppose that this feature isn't actually broken in 31.7.
    And you said XP 64. XP is obsolete and no longer supported and if there is a 64-bit version, then again you have set yourself apart from the mainstream.
    I had a look at the comcast site and found some puzzling recommendations. Some users come here asking how to set up a secured connection in Thunderbird when it isn't offered by the server. Comcast are different, in that they mention the ports 143 and 587, and also 993 and 465. So far so good, in that security is actually on offer, but they also suggest that you enable SSL, regardless of which port is being used. It would be unusual and unconventional to offer TLS or SSL on ports 143 and 587. STARTTLS would be more credible on these ports.
    Have you tried IMAP on 993 and SMTP on 465? SMTP on 587 with SSL, or TLS, is not impossible, but is improbable.

  • PROBLEM IN SENDING MAIL TO POSITIONS THROUGH SEND MAIL STEP

    Hi Experts,
    I am facing some problems in sending mail to positions from the organization structure from the send mail step.When I am using user as the recipient type it is working fine...but when i am choosing S position as the recipient type it is giving the error in the workflow log stating that method SENDTASKDESCRIPTION cannot be executed.
    I need to find a solution urgently...any suggestion would be sincerely appreciated.
    thanks.
    Narsingh

    Well you have probably tried this.. but just a recheck.
    1 . send email setep select Organizational Object
    2. Recipient Type Organizational Unit
    3. Here do an F4 and then select the Unit...
    Try this SAP behaves weirdly at times...
    after this do Refresh Buffers.. and Org Unit...
    Let us know if this works

  • Sending  mail to  Multiple User

    Hello Everybody ,
    I have Developed one Workflow for Material Creation ,
    Now the Problem is that After Creation of material By End User the mail  should to 3-4 User  for Display the Material.
    So how can we Maintain 3-4 user name in Workflow ..........?
    For one User  it's working Fine but I want that mail should  goes to  Multiple User .
    ASAP.
    Regrads,
    Sandeep

    Hi Krishna
    I completed the send   mail to Multiple User ,
    Here my three user  can see the  Material in his work item  .
    But when one user exeuted his  work item .
    othe user work item is automatically deleted ....................?  that should nt happened ?
    Actually My requriement is that   When  End User ( A1   )is created  material  ....
    After the creation of Material Worklfow should triggerd ...........
    After Creation of Material   Can be View by 3 Higher Level  Person of Different Department    i.e ( FI  ,  SD  , PP  ) 
    A1 ( Created By End User )  -
    >    A2  ,  A3 ,   A4  ( This Person Can view Material  in their  Respective  Inbox  Work Item )
    My Prb is that Work Item goes to (   A2 , A3 ,  A4  )  But anyone of this one executed his Work Item  .........then other two person Work Item is automatically Deleted ...........and this should nt happened...........
    I want that each and every person can view the Material in Display Mode at any time  and any Sequence ....Please help me Friend .............
    I  have done lot's of R/D  but didn't got any solution ...
    Regrads,
    Sandeep Jadhav

  • We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is: Cannot send mail. The user name or password for iCloud is incorrect.

    We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.

    About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone.  Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc.  This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...

  • Problem in sending mails to multiple persons

    Hi,
    I have a problem in sending mails to multiple people....
    My mail is using the local smtp server...The mail is to be send to multiple addresses in to and cc.
    for e.g the to address will have --> [email protected];[email protected]
    cc address will have --> [email protected];[email protected]
    How do this i.e set multiple to and cc address...
    My function that sends mail from my ejb looks like this...
    // create some properties and get the default Session
         Properties props = new Properties();
         props.put("mail.smtp.host", host);
         Session session = Session.getDefaultInstance(props, null);
         try{
         Message msg = new MimeMessage(session);
         msg.setFrom(new InternetAddress(from));
    //I HAVE TO SET MULTIPLE "TO" ADDRESSES HERE INSTEAD OF JUST 1
         InternetAddress[] address = {new InternetAddress(to)};
         msg.setRecipients(Message.RecipientType.TO, address);
    //I HAVE TO SET MULTIPLE "CC" ADDRESSES HERE INSTEAD OF JUST 1
    InternetAddress[] addresscc = {new InternetAddress(cc)};
         msg.setRecipients(Message.RecipientType.CC, addresscc);
         msg.setSubject(msgSubj);
         msg.setSentDate(new java.util.Date());
         msg.setText(msgText);
         Transport.send(msg);
         }catch (MessagingException ex) {
    System.out.println("\nException handling in javaMail.java :" + ex);
    Please help me out with a solution!!!Thanks in advance.
    Thanks
    Rahul

    Hi all,
    Got the solution...
    We have to use addRecipients method of the Message class to add as many receipts we want to set.
    example: Message.addRecipients(type,address).
    Thanks
    Rahul

  • Problem in sending mail from VF03

    Hi
    I am just getting a problem in sending mail to the recipient from script.
    please find the below code and let me know why there is no data in otf_tab table.
    DATA:  otf_tab TYPE TABLE OF itcoo WITH HEADER LINE.
    CALL FUNCTION 'CLOSE_FORM'
        IMPORTING
          RESULT  = i_itcpp
        TABLES
          otfdata = otf_tab
        EXCEPTIONS
          OTHERS  = 1.
    IF otf_tab[] IS NOT INITIAL.
          TRY.
              CREATE OBJECT mailer
                EXPORTING
                  i_nast = nast.
         mailer->get_mail_address( EXPORTING i_adrnr = vbdkr-adrnr ).
              mailer->get_mail_address( EXPORTING i_adrnr = vbdkr-adrnr
                                                     i_vkorg = vbdkr-vkorg
                                                    i_vtweg = vbdkr-vtweg ).
            zcl_sd_mail_output=>convert_otf_to_pdf( IMPORTING pdf_xstring =
            gv_pdf_string
                                                    CHANGING  otf_table   =
                                                    otf_tab[] ).
              mailer->build_and_send_email( EXPORTING pdf_xstring =
              gv_pdf_string ).
            CATCH zcx_sd_mail_no_mailid INTO error.
              error_txt = error->get_text( ).
              zcl_sd_mail_output=>protocol_update( msg_id = 'VN'
                                                   msg_nr = '902'
                                                   msg_ty = 'E'
                                                   msg_v1 = error_txt ).
              retcode = 1.
              CLEAR error_txt.
          ENDTRY.
        ENDIF.
    Since my OTf_tab is initial i am unable to send mails.

    Hi,
    If the OTF Data table is blank then you might have missed the parameter "GETOTFDATA" at the time of calling "OPEN_FORM". Please pass field TDGETOTF = "X" in paramter "OPTIONS" when you are calling "OPEN_FORM".
    You can also visit this link for more information.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/49e15474-0e01-0010-9cba-e62df8244556?QuickLink=index&overridelayout=true
    Cheers,

  • Problem in sending mail

    Hi all,
    I'm having some problem in sending mail. I did all configuration regarding this. After that when i tried to send mail, its giving some error, tht is, "SendMailService is not available".
    Can anybody help me on this.
    Thanks,
    Raj

    Hi Raj,
    Go to System Administrator > System Configuration > Knowledge Management > Content Management > Global Services > Mailing Service and make active option true, then restart your portal. Hope it'll work fine.
    Regards,
    Ganpati Jha

  • Problem in sending mail through dynamics actions

    Hi Friends,
    I have a problem in sending mail through dynamics actions . In this  we pass a subroutine in dynamics actions which send an mail when promotion action occured.
    Problem is that sometimes it will  send an mail or sometimes not. I have no idea to solve this problem.
    Can anyone suggest me .
    Thanks ,
    Anish
    Moderator message : Duplicate post locked.
    Edited by: Vinod Kumar on Sep 5, 2011 9:45 AM

    Hi,
    Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
    thank You

  • Sending mail to all users

    Folks,
    In Communigate there was a default 'all' account which could be used to send mail to all users. I know I could set up a mailing list to do this but does the Apple Mail server have a built in option for sending an email to all users?
    /// kak
    powerbook   Mac OS X (10.4.7)  

    No there is no such option.
    You will either need to setup a mailing list or create an alias that forwards to all your users.
    Obviously both solutions require that you add new users to the mailing list or alias.

  • How can i insure that job finished and good  and send mail to the user  ?

    how can i insure that job finished and good  ,
    and how can i send mail to the user "ok"   ?

    Hi Dakota.  We do something simular with our nightly MRP job.  Our MRP job runs around midnight,  then we kick off another job about 4am which checks to see if any of the jobs in question have abended, if so,  then it sends an email to the email addresses specify in the report variant.  Of course, this could be modified to check for successfully complete jobs, if that is your requirement.
    REPORT ZBCJOBMONITOR .
    TABLES: SOMLREC90,
            TBTCO.
    DATA: MAILDATA   LIKE SODOCCHGI1.
    DATA: MAILTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
    DATA: MAILREC    LIKE SOMLREC90 OCCURS 0  WITH HEADER LINE.
    DATA: I_TBTCO    LIKE TBTCO OCCURS 0 WITH HEADER LINE.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
    SELECT-OPTIONS: S_JOB FOR TBTCO-JOBNAME.
    SELECT-OPTIONS: S_JOBC FOR TBTCO-JOBClass.
    SELECT-OPTIONS: S_REC FOR SOMLREC90-RECEIVER.
    SELECTION-SCREEN END OF BLOCK B1.
    START-OF-SELECTION.
      CLEAR:    MAILDATA, MAILTXT, MAILREC, I_TBTCO.
      REFRESH:  MAILTXT, MAILREC, I_TBTCO.
      PERFORM GET_ABENDED_JOBS.
      PERFORM BUILD_RECEIVERS.
      LOOP AT I_TBTCO.
        PERFORM BUILD_TEXT_MESSAGE.
        PERFORM SEND_MAIL_NODIALOG..
      ENDLOOP.
    *      Form  BUILD_TEXT_MESSAGE
    FORM GET_ABENDED_JOBS.
      SELECT * FROM TBTCO
              INTO CORRESPONDING FIELDS OF TABLE I_TBTCO
                         WHERE JOBNAME IN S_JOB
                           AND STATUS = 'A'
                           AND JOBCLASS IN S_JOBC
                           AND SDLSTRTDT = SY-DATUM.
    ENDFORM.
    *      Form  BUILD_TEXT_MESSAGE
    FORM BUILD_TEXT_MESSAGE.
      DATA: DATE(10) TYPE C.
      DATA: TIME(10) TYPE C.
      MAILDATA-OBJ_NAME = 'MONITOR'.
      MAILDATA-OBJ_DESCR = 'Batch Job Monitor'.
      MAILDATA-OBJ_LANGU = SY-LANGU.
      CONCATENATE 'Job Name:' I_TBTCO-JOBNAME
                  INTO MAILTXT-LINE SEPARATED BY SPACE.
      APPEND MAILTXT.
      PERFORM FORMAT_DATE USING I_TBTCO-SDLSTRTDT
                                DATE.
      CONCATENATE I_TBTCO-SDLSTRTTM+0(2) ':'
                  I_TBTCO-SDLSTRTTM+2(2) ':'
                  I_TBTCO-SDLSTRTTM+4(2)
                     INTO TIME.
      CONCATENATE 'Start Date/Time:' DATE TIME
                INTO MAILTXT-LINE SEPARATED BY SPACE.
      APPEND MAILTXT.
      CONCATENATE 'Job Class:' I_TBTCO-JOBCLASS
                INTO MAILTXT-LINE SEPARATED BY SPACE.
      APPEND MAILTXT.
      MAILTXT-LINE = 'Job has terminated abnormally'.
      APPEND MAILTXT.
    ENDFORM.
    *      Form  BUILD_RECEIVERS
    FORM BUILD_RECEIVERS.
      LOOP AT S_REC.
        CLEAR MAILREC.
        MAILREC-RECEIVER = S_REC-LOW.
        MAILREC-REC_TYPE  = 'U'.
        APPEND MAILREC.
      ENDLOOP.
    ENDFORM.
    *      Form  SEND_MAIL_NODIALOG
    FORM SEND_MAIL_NODIALOG.
      CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
           EXPORTING
                DOCUMENT_DATA              = MAILDATA
                DOCUMENT_TYPE              = 'RAW'
                PUT_IN_OUTBOX              = 'X'
           TABLES
                OBJECT_HEADER              = MAILTXT
                OBJECT_CONTENT             = MAILTXT
                RECEIVERS                  = MAILREC
           EXCEPTIONS
                TOO_MANY_RECEIVERS         = 1
                DOCUMENT_NOT_SENT          = 2
                DOCUMENT_TYPE_NOT_EXIST    = 3
                OPERATION_NO_AUTHORIZATION = 4
                PARAMETER_ERROR            = 5
                X_ERROR                    = 6
                ENQUEUE_ERROR              = 7
                OTHERS                     = 8.
      IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.
    *      Form FORMAT_DATE
    FORM FORMAT_DATE USING IN
                           OUT.
      CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
           EXPORTING
                DATE_INTERNAL            = IN
           IMPORTING
                DATE_EXTERNAL            = OUT
           EXCEPTIONS
                DATE_INTERNAL_IS_INVALID = 1
                OTHERS                   = 2.
    ENDFORM.
    Regards,
    Rich Heilman

  • Problem of sending mail with MTA

    Hi,
    I have installed Sun Messaging Server, but I have a problem to send mail to other SMTP server over internet, like gmail, hotmail... So I have tried to send an email using javamail and I get this exception "530 5.7.1 Relaying not allowed", that mean that I don't have a Relay SMTP to routing the messages. But the idea that I have, is that the MTA installed with Messaging Server play the role of SMTP Relay.
    So this idea is true, so I think is can be I problem of configuration, and I need to have may own SMTP Relay and don't using ISP Relay.
    and I thank you for your help,
    Mabrouk.

    GS1-Tunisia wrote:
    21-Nov-2008 17:32:31.58 tcp_local                 Q 1 [email protected] rfc822;[email protected] [email protected] TCP active open: Failed connect()    Error: Connection timed out
    This indicates that Messaging Server is unable to connect to the yahoo mail servers.
    I have configured my server to use mydomain.com with ip 41.x.x.xHow did you configure your server to achieve this -- what settings did you add/change?
    but when I see this log [email protected] is converted to [email protected] and 192.168.3.2 is mailhost which is behind firewall in DMZ, So it may be the problem of NAT, I don't know!!!
    Given that Messaging Server cannot connect to the yahoo mail servers, the problem appears to be at the networking level so the firewall is most likely blocking the outgoing port 25 connection.
    When you are on the Messaging Server system, what output do you get for the following command:
    telnet a.mx.mail.yahoo.com. 25Regards,
    Shane.

  • Send Mails to Multiple Users

    Hi,
    I have a requirement where I need to send mail to multiple users, for this I was following below link
    Re: Email to Multiple Email Address through WF
    Followed the above link and created 2 users with Notification Preference as MAILHTML and added to a role having email id as NULL and Notification Preference as MAILHTML . But I am not able to send mails rather it is going as notifications to the user Worklist.
    Please help me to resolve this issue.
    Regards,
    Prateek

    Hi, Andy,
    Use the Oracle-supplied package utl_mail for sending email messages:
    http://docs.oracle.com/cd/B28359_01/appdev.111/b28419/u_mail.htm#i1001258
    It would be easier if you did not use dbms_output, or, if you really wanted to, do not call it directly. Write your own procedure (let's call it add_to_message) that concatenates a string to the end of a message that will ultimately be sent as an email. If you want to display the string using dbms_ouptut.put line as well as append it to the message, then call dbms_ouptut.put line inside add_to_message.
    If you really must get the text from dbms_output, use dbms_output.get_line (or get_lines)
    http://docs.oracle.com/cd/B28359_01/appdev.111/b28419/d_output.htm#i999346

  • How to send mail to multiple users in workflow

    Hi
    I have created a workflow for vendor details.
    after filling all the vendor details the mail should be sent to all managers
    involved in workflow.Can anyone tell me how to assign this task of sending mails to all users in organizational unit.

    hi
    user 1 has mailbox open when the work item arrives, then to user 2 it will apprear to be already read.
    Try using a logical AND in the definition of the responsibilites, so that when only both user 1 and user 2 (assuming that there can be two users) read their emails the work item is regarded as complete
    also check with the following link..
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c6456e89-0a01-0010-0189-a7961fe42034
    reward if useful
    regards
    dinesh

Maybe you are looking for