Problem in Service manager ( VISTA)

hi all
      i tried to install B1 in a laptop ( OS - VISTA),every thing get installed but the service manager get freezes,i m not able to open the Backup or license manager.Please anyone give me a solution.

The service is freezed because the user is not an administrator.
Login with user with administrator privilegies or run the application as administrator (Right click->Execute As Administrator)
Bye.

Similar Messages

  • Problem in Service Manager

    Hi,
    I m using SAP 2007 B. SAP is working fine only problem which i have is when is open service manager suite by clicking on the icon the service dropdown list is blank and all options are disbale. But my license manager is set as automatic in the services and application. How to bring these services in the list..?
    Swapnil

    Hi Swapnil,
    If you are using OS Windows Vista, before installing the Server Tools please check whether UAC (User           
    Account Control) is Set off. You can set it off from Control Panel=>User Account=>User Account Control. Please also deactivate "Data Execution Prevention" as per the attached note [1179514|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1179514].                                                                               
    Please also go through SAP Note [1253820|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1253820] describing a similar issue.
    hope it helps,
    Regards,
    Ladislav

  • Problema con Service Manager

    Hola Expertos
    Tengo un  detalle con el Service Manager, en primera instancia  los  botones de los servicios de  resaldos y  el mailer no se habilitan.
    Lo que hice y me funiono adecuadamente es reinstalar el Server Tools y nuevamtne  los botones de los servicios estaban habilitados para   ejecutar los servicios.
    El problema es el siguiente, CADA QUE RE-INICIO  EL SERVIDOR por  x motivos, los servicios se vuelve a desabilitar quedan los botones en color gris. y  nuvemente se tiene que hacer la re-intalacion del Server Tools.
    Esto le ha ocurrido a alguien mas?, tienen alguna idea de que es lo que puede estar ocurriendo?
    Ojala puedan ayudarme
    Reciban un Saludo.
    Yen

    Hola de nuevo...
    Bueno como ya comentó Mary Merecías, debes habilitar el usuario administrador en el equipo.
    Tu administrador de RED y de Dominio debe poderte ayudar con el inconveniente (si tienen departamento de sistemas mejor aún para que te puedan otorgar la contraseña de Administrador de Windows en caso que la tenga).
    Para saber si tienes el usuario administrador haz la sigiuente prueba: Busca un programa que quieras instalar, y si al momento de darle doble clic te aparece primero una pantalla pequeña diciendo "El siguiente programa esta intentando instalarse en el equipo, quiere instalarlo?..." y te da la opción de aceptar y comienza la instalación entonces NO estas con el administrador principal.
    Cuando estas con el administrador principal, no te solicita que confirmes la instalación de los programas que quieras instalar.
    Tambien puedes buscar información referente en Google colocando: "Entrar en Windows 7 con usuario administrador"
    Saludos

  • Service Manager Disabled - Vista Business

    Hi,
    I have started a clean installation of Business One on a Windows Vista Business environment. I have installed SQL 2005 Standard Edition SP2 and then installed the Server Component for SBO. After installing the Server Tools from SBO 2007A PL8 i cannot seem to start any of my services. All the buttons on my service manager are "Greyed Out" therefore cannot import a licence file, cannot start the licence server etc...
    Has anyone experiance a similar problem, or am I missing something?
    Please help....
    Regards
    Grant

    I'm experiencing the same problem.
    I haven't gone around to try this yet, but I think there might be some issues around the vista UAC. I'll post back if I figure out what to do.
    If anyone else could post their experience it would great. Any experience around vista could help too...

  • 'NI-PAL Service Manager has encountered a problem and needs to close. We are sorry for the inconvenience.'

    Hello,
    Any idea how to fix this problem that casuses this error?
    'NI-PAL Service Manager has encountered a problem and needs to close. We are sorry for the inconvenience.'
    I have been re-loading LabVIEW 8.0.1 Pro Dev Sytem, NI-DAQ (Traditional) and NI-DAQmx, all day.  This probelm seems to be related to the fact that I can, no longer, create executables or open my .lvproj files, yielding the other error:
    '' Problem sending commands to the program"
    Thank you
    Message Edited by FLT CTRL 6 on 06-02-2006 03:41 PM

    NI-PAL service Manager has encountered a problem and needs to close.… tell Microsoft...10Jan08
    Yesterday I started having this error message pop up when I first boot up my computer.  I haven’t even started LabVIEW. 
    Recent changes:
    6Jan08 Replaced motherboard and CPU.
    6Jan08 Formatted hard drive and reinstalled software(Windows XP Home Edition).  Computer working fine.
    8Jan08 Installed LabVIEW 8.0 Student Edition.  LV is working fine and the message does not appear.
    9Jan08 Download and install NiDAQ 8.6.1.  Reboot the system and the above error shows up.  LabVIEW works fine so far.
    Anybody have any ideas on what the problem is?  I have a screen shot of the actual message, but I can't load it on this page.
    Oliver
    [email protected]

  • Web services manager control login problem

    hi,
    I have installed SOA suite using Advanced installation type.
    After installation I am able to login into BPEL Console and it's working fine , but unable to login into web services manager control(http://localhost:8888/ccore) with oc4jadmin user...
    I found below errors in ccore.log file
    2008-10-03 09:33:45,879 INFO [AJPRequestHandler-HTTPThreadGroup-54] userregistry.UsersTable - isValidUserPassword() failed for oc4jadmin
    2008-10-03 09:33:45,879 INFO [AJPRequestHandler-HTTPThreadGroup-54] sampledb.LocalDBAuthProvider - The error in authenticate for user : oc4jadmin
    2008-10-03 09:33:45,879 SEVERE [AJPRequestHandler-HTTPThreadGroup-54] uibeans.LoginBean - Error when authenticating user. Invalid user id or password
    2008-10-03 10:17:30,744 SEVERE [AJPRequestHandler-HTTPThreadGroup-54] userregistry.UsersTable - isActiveUser() failed for oc4jadmin
    com.cfluent.utils.db.DBException: ORA-01017: invalid username/password; logon denied
         at com.cfluent.utils.db.DBContext.getConnection(DBContext.java:95)
         at com.cfluent.db.userregistry.UsersTable.isActiveUser(UsersTable.java:2599)
         at com.cfluent.db.userregistry.UsersTable.isValidUserPassword(UsersTable.java:2996)
         at com.cfluent.accessprovider.sampledb.LocalDBAuthProvider.authenticate(LocalDBAuthProvider.java:61)
         at com.cfluent.access.AccessSessionFactory.isAuthenticated(AccessSessionFactory.java:137)
         at com.cfluent.access.AccessSessionFactory.createSession(AccessSessionFactory.java:92)
         at com.cfluent.webui.uibeans.LoginBean.authenticateUser(LoginBean.java:31)
         at com.cfluent._coresv._Login._jspService(_Login.java:354)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.i18n.servlet.filter.ServletFilter.doFilter(ServletFilter.java:130)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:277)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:272)
         at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth(T4CTTIoauthenticate.java:647)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:308)
         at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
         at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
         at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
         at java.sql.DriverManager.getConnection(DriverManager.java:525)
         at java.sql.DriverManager.getConnection(DriverManager.java:171)
         at org.apache.commons.dbcp.DriverManagerConnectionFactory.createConnection(DriverManagerConnectionFactory.java:48)
         at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
         at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(GenericObjectPool.java:771)
         at org.apache.commons.dbcp.PoolingDriver.connect(PoolingDriver.java:175)
         at java.sql.DriverManager.getConnection(DriverManager.java:525)
         at java.sql.DriverManager.getConnection(DriverManager.java:171)
         at com.cfluent.utils.db.DBContext.getConnection(DBContext.java:86) ...
    can any one help me resolve this problem..

    You need to enable JSSO if you want the oc4jadmin password to be in scync with the other AS products. If you just want to login with oc4jadmin you perform the following steps. PLease note that if you change the passord in EM you will have to make these changes again to keep the password the same. JSSO is a cleaner solution.
    To change the default password for the user "admin", follow these steps:
    - delete admin user
    - add admin user back
    - add admin user to the super user group "su1-grp"
    1. Go to OC4J_HOME/owsm/bin directory and modify manageUserGroups.properties
    user_id=admin
    user_name=admin user
    user_password=yourNewPassword
    user_email=[email protected]
    group_id=su1-grp
    group_desc=super user group
    2. Delete the existing admin user by executing
    wsmadmin manageUserGroups deleteUser
    4. Add the admin user again by executing
    wsmadmin.bat manageUserGroups addUser
    5. Add admin user to super user group
    wsmadmin.bat manageUserGroups addUserGroup
    The admin user password is changed.

  • NI-Motion, 7344, NI-PAL Service Manager Problem

    We have a 7344 motion card installed in a PC.  The error started
    to happen after we had a power failure.  When the PC starts up the
    following message is displayed: "NI-PAL Service Manager encountered a
    problem and needed to close"  The Error signature is: szAppName:
    nipalsm.exe, szAppVer: 2.1.0.49152, sz ModName: NIMCInit.dll,
    szModVer:7.2.1.3003 offset: 0001cfac. 
    More Details:
    We have two 7344 motion cards: 1 and 2 and two computers A and B. 
    Both motion cards were installed in PC A when we had the power
    failure.  We can install card 2 into either PC A or PC B and not
    encounter the error.  We install card 1 into PC A and we have the
    problem.  When card 1 is installed into PC B the problem does not
    occure.
    What should we do?
    Pat Pointer  ([email protected])

    Pat,
    this is really weird behavior. Most likely the issue is caused by a harddrive problem on PC A which might be resolved by following these steps.
    Run CHKDSK /F from the Windows recovery console
    Uninstall NI-Motion and remove the 7344 boards.
    Install NI-Motion 7.4 which is the latest NI-Motion version
    Install the 7344 boards in your PC.
    I hope that helps,
    Jochen Klier
    National Instruments Germany

  • Ni-Pal service Manager hat ein Problem festgestellt und muß beendet werden

    Die Meldung "Ni-Pal service Manager hat ein Problem festgestellt und muß beendet werden" wird jedesmal wenn ich den Computer starte angezeigt. Das nervt. Weiß jemand Abhilfe?

    Hallo!
    Der NI-PAL service manager wird am Anfang immer gestartet und ist dafür verantwortlich, dass die entsprechenden DLLs in den Speicher geladen werden. Wenn bei Ihnen jetzt ein Fehler auftritt dann sollten Sie herausfinden welche DLL den Fehler verursacht. Wenn der Fehler auftritt haben Sie die Möglichkeit diese Informationen aufzurufen. (For more information about this error, please click here), danach öffnet sich ein Fenster in dem Sie den Namen der DLL finden.
    Die DLL sollte dann deinstalliert und nachher nochmals installiert werden, wird die DLL nicht mehr benötigt kann Sie auch uninstalliert bleiben.
    Dieser Fehler wird meistens durch eine fehlerhafte Installation verursacht und kann durch die Reinstallation behoben werden. Nach der Installation Rechner neu starten damit der Speicher neu geladen wird.
    Viel Erfolg und ich hoffe ich liege richtig!
    LG, Günther Prossinger

  • JCAPS UDDI - Problem Using the Web Service Management Application

    Hi everyone, this is my problem:
    1.) I installed the JCAPS UDDI Server in a Solaris. <-- Ok
    2.) In the eManager I installed the Web Services Access Manager. <-- Ok
    3.) I started the UDDI server. <-- Ok
    4.) I check that the process is running (in Solaris). <-- Ok
    5.) I'm trying to load the Web Service Management Application Login Page, but it doesn't show the page so I can't login and in consequence I can't publish, remove, view, and search WSDLs by using the Web Service Management Application.
    I appreciate some help about this.
    Regards

    Yes, I am connecting to the same system where we have data..
    Anirban

  • How can I escalate terrible FIOS service problems above FIOS field service management?

    This is a long story, but I will try to keep it short and on point.  We use Verizon FIOS for land line telephone, Internet access and TV cable.  For the past four and a half months, we have suffered serveral outages a week and sometimes several outages in a single day on all three services.  Sometimes we lose our Internet connection for a few moments.  Sometimes telephone calls get dropped or there is no dial tone.  Sometimes we see pixelation or interference in the cable TV signal.
    Often two services are affected at the same time.  We've recorded events where all three services were affected at one time.
    In the Gateway router logs, we see errors messages that "opaque does not match!" and "rebinding lease."  These messages in the router logs occur at the same time stamps when we suffer dropped calls or cable TV interference.  It seem obvious, at least to me, that the problem is external to anything that is inside of our house.
    We have opened a dozen or more support tickets.  We've had four Verizon field technicians come to our house.  We've gone through three Verizon Gateway routers.. We've accessed the Internet using only wireless connections of a week to try and rule out internal wiring problems with computer access to the Internet.
    Verizon has replaced the ONT (optical network terminal) on the side of our house.  They changed the fibre channel cable that goes from the ONT to a vault out by the curb of the street.
    We have opened a formal complaint with the FCC and with the PA Public Utility Commission.  But the problem has not been resolved.  We think that we're just getting the run around now from Verizon field service.  Yesterday, a service manager left me a voicemail where he suggested that our Internet problem was caused by a second router that we had hooked up to the Verizon router.  We DO NOT have a second router.  He said that there was a problem with cable TV interference in my area and 2nd level support was working on it.  He did not address the dropped landline calls.  He did not address why outages on more than one service would occur at the same time.
    Does anyone have any advice on how I get our problem escalated?  We are at the end of our rope here and are considering canceling our service with Verizon and going with a competitor.  But even after all of this, we are hesitant to switch providers because we will lose our email accounts that we've used for well over a decade.

    Hi wepeccant,
    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

  • Service Manager problem - ASAP

    Hi,
    In our server i am not able to see the services in service manager. can anyone tell me how to resolve it.
    This is very important since i m not able to get the hardware key for server.
    swapnil

    Sapnil,
    Assuming you get the ServerTools running on another machine and the entire SAP Business One system runs smoothly. Then you should have a deeper look on the Server to get the ServiceTools installed there.
    - As soon you get it running there, you will be able to get the hardwarekey. (Actually, SAP Business One License service uses exactly the same hardwarekey, which Microsft uses in order to activate Windows Operating System.)
    - Then change maintain this installation on our Marketplace and change the hardwarekey for this installation. If there should be a problem, refer to Notes [781853|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=781853] and [776869|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=776869].
    - Request a new licensefile. Be patient, it might take some time until all settings were replicated.
    - Import it on the just installed licence manager on the Server.
    - Now you have 2 possibilities:
    Enter the new licenseserver via SAP Business One ->Administration -> License ->License  Administration.
    OR:
    Stop the license service on the machine you used temporally for the ServiceTools. Afterwards open   Business One. Since the Licenseserver cannot be found anymore, you will be asked to enter name or IP adress of another licenseserver. Enter the name or IP adress of the Server.
    - Deinstall the temporally installed licensesserver as soon you have verified everything runs smoothly again.
    Kind regards
    Mario

  • Oracle Web Services Manager, Coresv problems

    Coresv, Web Services Manager May 21, 2005 9:04 PM
    Reply
    I have downloaded Web Services Manager (part of the Application Server Downloads), also called as coresv.
    I have done the installation as per the scripts but need some help with some issues that I am getting.
    Basically when I goto the http://localhost:3115/ccore page, the login works fine but after that all I see is
    two empty frames:
    1. Error
    The following exception occured when processing the JSP:
    Provider org.apache.xalan.processor.TransformerFactoryImpl not found
    Use your browsers "Back" button if you would like to try again.
    Contact Oracle Web Services Manager Administrator
    2. Error
    The following exception occured when processing the JSP:
    getActiveComponents failed
    Use your browsers "Back" button if you would like to try again.
    Contact Oracle Web Services Manager Administrator
    Can you guide me where should I post this message?
    Thanks
    Best Regards
    Hitesh

    Follow-up on this topic
    1. Still not able to run the default Tomcat Instance.
    2. However, was able to get to the console of Web Services Manager when deployed to a Weblogic 8.1 SP3 instance.
    But after configuring a gateway, registering a service and comitting the policies etc. as described by the book, when I try to access the service using the URL
    http://localhost:7001/gateway/services/SID0003006?wsdl
    http://localhost:7001/gateway is where the gateway.war is deployed.
    I get
    Oracle Web Services Manager Gateway : Cannot find WSDL for service "SID0003006"
    I can't execute the service either..
    Thanks
    Hitesh

  • Windows Service Manager 32-Bit Has Stopped Responding/iPod not showing up in iTunes

    Hello,
    I've scoured this forum for answers but I cannot find any result that works. I have an iPod classic that I've connected to my Gateway running Windows Vista for over four years without issue. When I was using iTunes 9 the other day, I plugged my iPod into my computer, but it only connected to My Computer and didn't connect to iTunes and update my iPod accordingly. So, the iPod is charging and the iPod is showing the "Connected, Eject before disconnecting" screen, but it isn't adding new music (which kind of defeats the purpose of buying new music). I thought it was because I was using 9, so I downloaded iTunes 10, but the issue still popped up.
    This hasn't pop up today after I installed 10, but back when I was using iTunes 9 the following error came up on my computer: "Windows Service Manager 32-bit Has Stopped Working." Now, no error messages pop up, even though the problem persists.
    I've tried suggestions in this post as well as in this post. Also, with the fix being recommended in those threads to change the code in Notepad by clicking "edit" under the System tab under My Computer? There's one problem - there is no edit button on my options. I've included a screen grab to prove this.
    I don't know if the relative age of the discussions makes any difference - maybe a new fix has com up and i'm just not finding it? Plus, since this issue began with iTunes 9, I can't help but feel like getting rid of iTunes 10 is going to help the issue, either.
    This is incredibly frustrating, not being able to add new music to my iPod, so if anyone can help me out, I would greatly appreciate it, as previously recommended ones aren't useful.
    Screen grab of iPod connecting to My Computer, but not iTunes:
    Screen grab of the lack of an "Edit" button in the place to edit codes as recommended in previous topics:

    One again shamelessly asking for help

  • SBO Service manager

    I installed SAP Business One 8.8 and the Upgrade PL13.
    The SQL server 2008 was installed a few months earlier and already in use.
    The SBO service manager is not working well:
    If I choose at Service: license manager,(or SBO Backup, SBO DI Server)
    the buttons below stay grey and become not active.
    I don't know what the problem is.
    This is the reason I cannot find the hardware key for my licence key.
    Can anybody help me?

    Webber is correct that there is no problem with your hardware key.
    The license server is not able to access because there is security setting prohibit it to run. The security setting is in the UAC.
    In the OS like windows server 2008 and UAC setting in the OS MS Window Vista or Window 7. there is UAC that turn on.  This made the license server is unable to run. If you are using laptop or notebook as server standalone and using MS. Window Vista, just turn off the UAC. If you are using window 7, just set the UAC from always notify or default to notify me ... or never notify.
    The setting is similar with windows server 2008 and do not afraid the other impact. The security is just to prevent the running of the softare that is not yet certified by Microsoft software. UAC is available in the user account. Access the user account in control pannel.
    if you set the UAC default or always notify, you need to run as administrator for the SAP B1 software including SBO service manager.
    here is the steps:
    1. To run a program one time as an administrator
    Right-click the program and select 'Run as administrator'.
    2. To run a program permanently as an administrator
    Right-click the program and select Properties -> Tab Compatibility -> Privilege Level -> Change settings for all users -> Privilege Level -> Run this program as an administrator
    if this issue solved, pls close  this message as answered.
    JimM

  • Service Manager data warehouse management server Installation fails

    Hi there,
    In Virtual Machine Windows Server 2012 R2 Standard with my user being a Local Admin and SQL Admin. I tried to do a Service Manager data warehouse management server
    first installation I am facing the following image as error:
    In the event viewer I get the following error:
    "Microsoft System Center 2012 R2 Service Manager -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 25211
    The arguments are: -2147024809, The parameter is incorrect."
    In the Setup log, some of the errors are:
    WixRemoveFoldersEx:  Entering WixRemoveFoldersEx in C:\Windows\Installer\MSI35E.tmp, version 3.7.1224.0
    WixRemoveFoldersEx:  Error 0x80070057: Missing folder property: PSCONFIGFOLDER.A591E3B4_D228_431D_BF89_99D52C8FFB76 for row: wrf4582BC4C5CC47B1D2380408CD7A752DC.A591E3B4_D228_431D_BF89_99D52C8FFB76
    CustomAction WixRemoveFoldersEx.A591E3B4_D228_431D_BF89_99D52C8FFB76 returned actual error code 1603 but will be translated to success due to continue marking
    CAStartServices: CAStartServices was passed . OMCFG
    CAStartServices: Checking if service already started. OMCFG
    CAStartServices: Attempting to start service. OMCFG
    CAStartServices: StartService failed. Error Code: 0x8007042D.
    ConfigureSDKConfigService: CAStartServices failed, trying again.... Error Code: 0x8007042D. OMCFG
    Action start 17:47:05: _SetHealthServiceConfig.80B659D9_F758_4E7D_B4FA_E53FC737DCC9.
    GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMServer
    MSI (s) (EC!4C) [17:47:05:483]: Note: 1: 2711 2: MOMGateway
    SetHealthServiceConfig: Failed to get Feature State.. Error Code: 0x80070646. MOMServer
    GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMGateway
    I have checked the following post but it did not help me:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/c42bb04d-a51e-4037-a8a3-37d714d6faac/scsm-management-server-installation-fails?forum=systemcenterservicemanager
    Could you please help me with this issue?
    Thanks a lot,
    M

    Hi,
    Sorry I cannot post the full log. I have found also these errors in the log:
    Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.RegisterSdkSCP
    RegisterSdkSCP: There is no previous serviceConnectionPoint
    RegisterSdkSCP: Creating New serviceConnectionPoint
    RegisterSdkSCP: Adding ACL for current user: DOMAIN\InstallationAccount
    RegisterSdkSCP: Adding ACL for SM Admini: DOMAIN\SCSMDWadmins
    RegisterSdkSCP: Error: Access is denied.
    InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "D:\Program Files\Microsoft System Center 2012 R2\Service Manager\MOMConnectorCounters.ini"
    InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
    InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
    InstallPerfCountersLib: Retry Count : .
    InstallHSPerfCounters: Failed to install agent perf counters. Error Code: 0x80070057.
    Thanks for your reply.

Maybe you are looking for