Problem in service master (AC01)

Hi,
My client is using SAP 4.7 ECC. In the client system, unit of measure field set as mandatory field in Service master (T.Code- AC01). As per system setting, system should not allow to create a new service master via T.Code AC03 by keeping unit of field blank. However, occasionally system allows the user to create service master without entering any thing in the unit of measure field. Once the service is created with unit of measure field as blank, system not allow the user to enter into edit mode of service master (T.Code AC02). System give massage Please maintain unit of measure.
Can any one so kind to help me for resoling this issue.
Your assistance will be highly appreciated.
Regds,
sp sahu

Hi,
If unit of measure field set as mandatory field in Service master how system will allow you save service master without entry of unit of measure? Just check the following path:
SPRO->MM->External Service Management->Service Master->Field Display for service Master->Define Field Selection for Service Master (List Entry)
And check here base unit of measure is in position of Input or Required, Display or Hide Or highlighted
Regards,
Biju K

Similar Messages

Custom Subscreen in Service Master AC01 not invoked

Defined custom subscreen(SAPLXBAS 8100) for service master AC01. User Exit is activated , however the line of code inthe main screen which calls the subscreen is not being called at runtime. Details are as follows
ECC6.0
UserExit : SRVASMD
Calling screen No. Area Called screen No.
SAPLBAS0 0300 ZUSATZ SAPLXBAS 8100
this is the line which is being ignored while executing the transaction ac01
CALL CUSTOMER-SUBSCREEN ZUSATZ INCLUDING 'SAPLXBAS' '8100'.
Any inputs appreciated and points would be awarded

Hi,
Here is step by step to implement an screen exit
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
the tcode is cmod...
1.From the main screen of the Project management transaction, proceed as follows:
Select Enhancement components and choose Change.
2.Choose Edit component.
3.Choose the screen exit and double click on it
4.Create your subscreen using the Screen Painter.
5.Design your screen to be added to the standard screen and activate the particular screen and return back to the flow logic .
6.Choose the PAI and PBO to write down the logic.
7.Generate your screen and choose Back (the green arrow) to return to the Project management transaction.
8.Go to the transaction ME22 to view the customer defined screen exit.
9.Enter the purchase order number and press Enter.
10.Go to the menu header --> Details.
11.Purchase number is visible on the standard screen
<b>Reward points</b>
Regards

Service Master - AC01

Hi,
Is there any way to do the mass maintanence in Service Master - AC01.
I want to do mass for Matrl/Service Grp in the service master.
Thanks in advance
Samir Bhatt

Hi,
You may use LSMW for mass maintenance of service mastre
Regards,
Prashant Kolhatkar

MM SRV - Service Master - AC01 and MM01

Hi All,
Please help in these questions regarding External Service Master management we create in AC01.
1.   Is this Service Material is anyway related to MM01 material or they are two completely different materials?
2.   What is common between MM01 Material and AC01 Service Material ?
3.   Is Service Material is used in SRM ? If yes, all of them or only some of them ?
+ An

Hi,
1. Material(used for material being procured) master and service master(used for services being procured) are two different master details in SAP.
2. service master records to be used while procuring services with item category D, and service master numbers to be entered at service line item level. Same like materials, details like unit, description, service groups, valuation claas needs to be maintained while creation of service master.
4. standard reports are available in SAP to track the services procured based on the service master number.
3 yes. service master data can be used in SRm, all of them can be used.

MM-SRV: Adopt Material Group from Service Master instead of default in SPRO

At my current client we are encountering a problem when creating requisitions for services. When the system was originally configured years ago, a default value for material group was entered in the IMG under:
Logistics > Materials Management > External Services Management > Source Determination and Default Values > For Client
Field is "Default material group at item level" (V_T165-MATKL)
Up to now this singular default value was fine because they only had one material group for services. They are now wanting to further stratify their services spend, so there are now several additional values for Material Group that can (and are) used among their service master records. Having a single default value for Material Group is resulting in incorrect reporting of spend per Material Group.
I removed the default value in the config node stated above, but now the problem is that when creating a requisition line for services (item category D) in ME51N, no value for Material Group comes in at all, resulting in an error because Material Group is a mandatory field. Making the field optional on the Field Selection Groups is not a valid solution, as they need Material Group for spend reporting.
What we really need is for the Material Group to be automatically copied over from the service master data, in the same manner that this takes place for the material group contained in a material master.
Is this possible?
Thanks in advance,
Jason

Hi,
Hi,
1) If service master is used in the PO item, then the system will take the
material group from the service master (AC01).
2) If no service master is maintained then the system will take the
material group from the table T023. To be able to change this material group on services level - if you want a different material group on services level, you must set the field ESLL-MATKL for visible in the table control settings, and the change of the service group must be carried out manually.
Please be advised that it is the standard behaviour that the material
group on service level is not updated automatically after you have
changed the material group on purchasing level. The material group on
service level must be adjusted manually.
3) By default for service lines the system will consider the material
group which is entered at the Item level.
Services can have different material groups, therefore you can change
the material group at service level. The material group in service line
can be different and always takes higher priority from the material
group at the item level.
Regards,
Edit

Service Master / Activity Master description change Issue

Dear Experts,
I am facing problem with Service master / Activity Master description change problem.
Steps in the problem -
1) Service Master / Activity Master created.
2) Long term purchase order (with large quantity) is created.
3) Service entry sheet and Invoice has been posted for the Purchase Order.
Due Service master / Activity master description change requirement from client, description of the
Services are changed.
But it is not updated in Purchase order. (As purchase order has been created before service master description change)
and when i am trying to post next service entry sheet with reference to the long term purchase order created,
it is not adopting the new one service description.
Thanks in Advance

Hi Kiran
The solution to your issue could be achieved as follows:
In the item level 'Service' tab for the corresponding PO line item, change the quantity to which you have already made Service Entry sheet. Then create a new line item with the Service number, once you enter the Service number you would see the new description here. Then when you create a Service Entry sheet with reference to PO, the system would ask you to select one of the two entries you have in PO. Here select the new entry which you have made.
Thanks
Prashanth

Service MAster List report

Hi,
I want list of the all the Services with their valuaction class detail.
So how com i can do this. Which T-code is useful for this.
Regards,
Zubs

Hi,
AC00     Service Master
AC01     Create Service Master
AC02     change Service Master
AC03     display ervice Master
AC04     Service Master
AC05     List Processing: Service Master
AC06     List Display: Service Master
NMS8     Service Master
NRBL     IS-H: Report Ctrl. Service Master
NTRL     Transport Service Master
OXA1     List: Service Master Records
Thanks & regards,
Kiran

Service Master Archiving

Hi..
I m having problems with Service Master archiving...its getting cancelled...can anybody please help me in this issue with the process and customizing that needs to be done for archiving...and please let me know if there is any direct path to delete the Service masters as in SPRO its not available.
Regards,
Abhishek Jain

Hi Abhishek,
Is the Job is cancelled or the archiving gives a dump in SARA?
Just check the setting and customizing in transaction AOBJ.
regards, Jai

Purchase Group in Service Master

Dear Experts,
Please can you provide information on the following.
1. Is there a field to enter the purchse group in the service master, similar to purchase group in Material Master- Purchasing view.
2. If available, please let me know the steps to get the field in service master.
2a. Relevance of Purchase group in service master.
3. In case auto PO need to be created for services, the steps need to be followed.
Thank you all in advance.
regards,
Suresh

Hi,
there is no feild for purchase group in service master.
steps you follow to create service po are;-
1. create service master - ac01
2. create Po using me21n
in that select account assgmt as K and item category as D .
enter g/l acccount.and service number.and save.
3. create service entry sheet using ml81n.
4 then accept service sheet
5 pass MIRO.
Regards,
vijay

Unit Conversion in Service master

It seems the in service master (AC01) there could be only one unit conversion. Can we have more than one unit conversion just like material master. If yes how to do that?

Hi ,
Unit of conversion is Default settings(in img activity at Pur org or client level) while creating Service PO UOM is always in AU.
regards,
Patil

Regarding Service Master

hi all,
I am trying to upload data for Service Master(AC01). When i am trying to do Recording that is not coming in Create Mode. that is showing in Display Mode.
How can we do it.
Please Suggest
Regards
Rami

hey ,
u can go to t-code AC03, i dont know how but this transaction has a 'CREATE' icon. from there u can create your own service
regs,
saurabh

Problem in the contract - price of service master is notcpying to condition

Dear Experts,
I am facing a problem with the contract. I have created a contract for services. I have entered all the details like, validity period Service master numbers, Qty and price for each service master.
When I am using this contract in the maintenance order the price is not getting copied. I have analyzed the same and found that there is pricing condition created for the service master line item by the system automatically and this helps copying the price from contract to maintenance order.
This is happening to only one particular Pur. Org. For all other Pur. Org its not happening.
Can some one tell me what could be the reason for not creating the pricing condition for the contracts created for only a particular Pur. Org? Is there any configuration setting missing?
Please help me.
Thanks and Regards,
Praveen

Hello experts,
Can some one please through light on this please?
Thanks and Regards,
Praveen

Problem in uploading long text in service master through AC02

hi experts,
while iam recording the LSMW through T Code AC02 the system is not linking to the longtext in service master. Kindly guide me in this regard to upload service master with service long text together

I have the same problem where the long text is not being updated through a AC02 BDC session. Did you find a solution to the problem yet?
Thanks
Johan

MM SRV - AC01 - Service Master - Hierarchy Service Number

Hi All,
Please help in these questions regarding Hierarchy Service Number for External Service Master management we create in AC01. we can enter the other service master in this field and this creates the hierarchy of the Service.
1. How Hierarchy Service Number works?
2. Upto how many levels of this hierarchy goes?
3. Does the IDoc type SRVMAS contains this information ?
+ An

Hi,
1. Material(used for material being procured) master and service master(used for services being procured) are two different master details in SAP.
2. service master records to be used while procuring services with item category D, and service master numbers to be entered at service line item level. Same like materials, details like unit, description, service groups, valuation claas needs to be maintained while creation of service master.
4. standard reports are available in SAP to track the services procured based on the service master number.
3 yes. service master data can be used in SRm, all of them can be used.

BAPI/FM for creation of Service Master :T.Code :AC01

I want to create a service master corresponsing to each serial no/equipment( which gets automatically created at the time of GR . Can you please suggest how I can create a service master in the background at the time of GR.. Any BAPI or function module which can be called by the customised program and keyed in the serial no.
Thanks
Tausif

Hi,
Please check this FM CO_ZF_PRODUCTIONORDER_CREATE.
Regards,
Ferry Lianto

Problem in service master (AC01)

Similar Messages

Maybe you are looking for