Problem in setting the target directory in communication channel

hi...
my idoc 've been send successfully from the sender system and it also reached the receiver system. i conform it by checking the inbounds in IDX5.
but it is not generating the xml file in the target directory.
plz help me...

Hi,
Check the status of the receiver communication channel in RWB
Configure Your Receiver File Channel as Following
http://help.sap.com/saphelp_nw70/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
File to File scenario:
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
Regards
Seshagiri

Similar Messages

How to set the target directory from source filename using adaptor module.

Hi,
How im using a logical bypass scenario.I have to set the target directory using the sorce filename.There is no chance of using a Java UDF as my scenario does not have a Mapping(as it is a Bypass Scenario).The only option that i got is to use a Adaptor module.Can anyone help me this.
Thanks,
Bhargav

Hi,
See this link,
http://help.sap.com/saphelp_nw04/helpdata/en/e9/61e1407e858031e10000000a1550b0/content.htm
hope it helps.
Regards,
Akshay Jamgaonkar.
Reward points if find useful.

Problem in setting the target property to _SELF of LinkToURL UI Element

Hi,
I have a LinkToURL UI Element in my web page which has to open up another page in the same window.
I tried setting the target property to _SELF, but it's not working.Instead the page is opened in a new child window.
Please tell me whether to set any other property to get that.
Thanks and Regards,
Padma Usha.

Hi,
Please give the target value in lowercase "_self".
Regards, Anilkumar

Dynamically deciding the target directory without ESR objects

Hi Experts,
I have come across File to File scenario(NFS) where I have to serve 2 purpose in one scenario using single receiver communication channel as the client have more than 40 plants.
1. I need to copy the file from source directory to target directory without creating the mapping objects.
2. based on source file name the target directory path will be the 'target directory + First 4 character of source file name i.e.(Plant name)'.
I am able to achieve the First requirement, can any one tell me how to achieve Second requirement.
Thanks in advance.
Ragards,
Gopi

Hi Inaki Villa/ Anupam Ghosh,
Thanks for your previous reply. I was busy with some other WS related task.
I have gone through the thread which uses java code to dynamically set the Target Directory.
'Dynamic file name for pass-through scenario - Process Integration - SCN Wiki'.
But the mentioned JAR files are not available on our clients PI System (PI 7.0) I tried by importing the required JAR files from other system but it was giving some error. So I decided to go with ABAP Mapping and I am quite successful in setting the target directory. I am able to view the Target Directory and Target File name in 'DynamicConfiguration' in SXMB_MONI.
But it is not over writing the 'Target Directory' path mentioned in Receiver Communication Channel.
Could you please help me in this? Do I need to set anything else?
Regards,
Gopi

How to set the target property of hyperlink through formula

Hi guyz,
I have a problem in setting the target property of hyperlink field. I'm using CR XI R2 with asp.net.
I want to set the target property of hyperlink as one of the frame on my webform. how can i do it through formula in crystal report.
I want to set it through CR because i don't have any way to identify the link fields uniquely. these link fields are generated dynamically from data base. I have some other links on my webform. If i try to get all links through javascript and change the target property it may effect some other functionalities, so i'm avoiding using javascript to set the target property of hyperlinks.
your help will be highly appreciated.
Thanks in advance
Deepak

You may want to look at the HyperlinkTarget property of the CrystalReportViewer. If you want all hyperlinks in the report to go to that frame, it should work for you.

Pre-populate adapter for setting the Active Directory OU for a user

Hi All
I created a pre-populate adapter that set the Active Directory OU for a user...
In the end the status of the resource is still showing "provisioning"..
It must be "Provsioned"..did I miss something ?
The logs speak as below :-
08:01:12,678 INFO [STDOUT] Running Create User
08:01:12,678 INFO [STDOUT] Before appending Root Context:OU=Human Resources,
08:01:12,678 INFO [STDOUT] tcUtilLDAPController.java : hierString : OU=Human Resources,dc=mydomain,dc=com
08:01:13,553 ERROR [ACTIVEDIRECTORYCONTROLLER] Problem creating object: javax.naming.OperationNotSupportedException: [LD
AP: error code 53 - 0000001F: SvcErr: DSID-031A0FC0, problem 5003 (WILL_NOT_PERFORM), data 0
]; remaining name 'cn=ASYMONDS'
08:03:18,756 INFO [[xlWebApp]] action: LogonAction: User 'XELSYSADM' logged on in session 8116CBC0FA1481D06A207A1941B9
E096
08:22:31,256 ERROR [WEBAPP] Class/Method: ProvisionedResourcesForUserAction/confirmEnableSelection encounter some proble
ms: No checkbox was checked.

Just verify the OU value is correctly populated , first try doing the provisioning by manually giving OU and everything .
Is it successful ?
Then we can check if something wrong going with pre pop.
Thanks
Suren

Problem in setting the smtp in a apple mail account.

Can anyone help me resolve a problem in setting the mail preferrences? I have multiple email accounts and the smtp address is being deleted to a none smtp in an account then when I fix the problem in one account it deletes an smtp address in another email account. When I fix that account it deletd another smtp address and so on an so forth. Is this a virus or is there a fix for this problem?

Mail in IOS iPhone or OS X?
Anyway You select each account and assign or create new smtp.

What is the transaction code to set the download directory?

What is the transaction code to set the download directory?

SO21 is the Maintain PC Work directory transaction
Cheers,
Ben

How to set the working directory for reports in linux

Hi All,
Can you anyone help me to set the working directory for oracle application server 10g reports? I am using RHEL4 and AS10g. Actually i want to run my reports from my define
working directory. How can I do this?
Thanks in advance
Arif

Hi,
your rep_srv.conf should look like something like
+<?xml version = '1.0' encoding = 'ISO-8859-1'?>+
+<!DOCTYPE server PUBLIC "-//Oracle Corp.//DTD Reports Server Configuration //EN" "file:D:\oracle\FRHome_1/reports/dtd/rwserverconf.dtd">+
+<server version="10.1.2.0.2">+
++
++
+<cache class="oracle.reports.cache.RWCache">+
+<property name="cacheSize" value="50"/>+
++
++
++
+</cache>+
+<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="3" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="90000" jvmOptions="-Xmx512M -Xss512K">+
++
++
++
+</engine>+
+...+
some more definitions
+..+
++
+<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>+
+<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>+
+<pluginParam name="textpds" type="file">textpds.conf</pluginParam>+
*<environment id="APP1">*
*+<envVariable name="REPORTS_PATH" value="/application1/reports"/>+*
*+</environment>+*
*+<environment id="APP2">+*
*+<envVariable name="REPORTS_PATH" value="/application2/reports"/>+*
+</environment>+
+</server>+
The environment ids you can choose yourself and you have to put them in there yourself too (here I put two environments for two different applications "1" and "2").
If you call a report from Forms, then you have to code something like
ADD_PARAMETER(p_list,'ENVID',TEXT_PARAMETER,'APP1');
Details depend on how you call your reports, my example is for using a parameter list and calling a report out of application1
Hope that helps.
Volker

How to set the initial directory

Using the FileChooser in JavaFX 2.0. How do you correctly set the initial directory?
In Swing you would do the following:
JFileChooser Choose = new JFileChooser();
Choose.setCurrentDirectory(new File("."));But in JavaFX:
Choose.setInitialDirectory(new File("."));does not work and causes JavaFX to bomb out when this code is triggered.
Edited by: 863626 on 30-Oct-2011 05:30

javafx.stage.FileChooser choose = newjavafx.stage.FileChooser();
File d = new File(getClass().getResource(".").getFile());
choose.setInitialDirectory(d);

How can I log the data transmission of my switch in a file to analyze the quality of my communication channel?

How can I log the data transmission of my switch in a file to analyze the quality of my communication channels?

A lot depends on what type of switch you have and what kind of communication channels you're asking about.
There are several Cisco tools (e.g., "ip sla", SNMP-queried values, show commands etc.) that can give useful information.
If you give us some more information we can help more specifically.

How to set the defualt directory of where to look for a file to read

I am reading a file from a servlet. I wanted to see where Tomcat would write the file if I didn't specify a path. The results surprised me. It wrote the file in: "C:\Documents and Settings\myusername\Start Menu\Programs\Apache Tomcat 4.1". So I looked through server.xml to see if perhaps this path was set there but didn't find anything. I right clicked on the "Start Tomcat" target to see its properties and there it was. There was a field "Start in:" and it contained the aforementioned path. I changed it to what I wanted but there has to be a way to set this in server.xml. How do I do this. my guess would be something like :
"<Context path="" docBase="c:/theDefaultDirectory" debug="0"/>", but this didn't work. Any light on this subject would GREATLY be appreciatted,
silas

Well, actually, it opens file where the process is currently located on your fileSystem. since you seems to be using windows, the process is started in the directory written in the "Starts In" field. Now you could use the command line (the ugly MSDOS like window), go to some directory and starts the tomcat process from there, and the files would be created in that place.
The docBase tells where tomcat should look when looking for pages (html jsp, etc...). If you want to use it, you can still refers to it as :
new File (yourServlet.getServletConfig().getContextPath("/myfile.txt"))Another track to check would be to look in the System.getProperties. There has to be some property that gives the current JVM path, try to change it to the location you'd like it to be and see if it conforms to how you'd like to see it works.
Still, remember that you can have multiple Context in your servlet container, so there's no reason for tomcat to set the JVM default path to the docBase from one or another (File is a global JVM utility, not a J2EE only feature !!).

Problem while setting the selected value of h:selectOneMenu to bean

Hi all,
I am new to JSF. I am working on application where i have combo boxe on the page. I am setting some values to the combobox from database using <f:selectItems> tag and one value using <f:selectItem> tag. The value combobox value selected by user is set to the bean property which is String. I am able to display all the values in the combobox but when clicked on button (present at the end of form) i am getting following error-
ERROR HtmlRendererUtils:354 - Error finding Converter for
component with id interviewStageOneForm:acceptanceChannelList
I am setting the combobox selected value to the to the bean property which is String and the value selected in also String. Then which converter it is asking for. I am not able to find out what is the problem.
Your suggestions will be really appreciated.
Here is my code snippet:-
JSF:-
<h:selectOneMenu id="acceptanceChannelList"
     value="#{interviewStageOneBean.index}">
     <f:selectItem itemValue="Select" itemLabel="#{Message.combo_select}" />
     <f:selectItems value="#{MasterDataBean.acceptanceChannelList}" /> 
</h:selectOneMenu>Bean:-
public class InterviewStageOneBean {
     private String index;
     public String getIndex() {
          return index;
     public void setIndex(String index) {
          this.index = index;
}

Hi!
First I would try next:
Try to leave out
<f:selectItem itemValue="Select" itemLabel="#{Message.combo_select}" />
line. And check if it works after that. If it didn't repeat step but you leave in message selectItem and dump out database selectItem line.
Second:
I would check acceptanceChannelList creation and what type of objects you put while doing setValue and setLabel on UISelectItem
Probably selectItem value has been assigned an object of type the engine doesn't know how to convert from String to it.

Problem when changing the target quantity for a contract

Hello,
I have a problem when i try to change the target quantity for a contract through the BAPI 'BAPI_CONTRACT_CHANGE'.
I filled the tables 'item' and 'itemx' with new values. the BAPI 'BAPI_CONTRACT_CHANGE' returns no error, but after using the BAPI 'BAPI_TRANSACTION_COMMIT' I get an info message from SAP and the modification does not pass.
In debugger I could locate the error. In fact, the appeal of FM 'ME_UPDATE_DOCUMENT is done with a table XEKKN with the new values of the quantity and a KZ code equal to ' I ' to insert, then it must have the value ' U 'for update .
Is someone can help me to solve this problem?
Thank you in advance.

Have you tried selecting the page, and then changing the theme directly on that page?

Problem in setting the parameters for an OASingleSelectionBean

Hi,
I have created an advanced table, for which I have to allow single selection or mutliple selection according to my requirements ie dynamically. So, for single selection, I have created a OASingleSelectionBean dynamically and add this to my advanced table bean.
I also want to set Action for the single selection option. I have set the action using
setPrimaryClientAction() which takes an argument of oracle.cabo.ui.action.FirePartialAction class. Now I also want to pass certain parameters when the single selection event happens.
For that, I have taken an object of FirePartialAction class and but using the FirePartialAction class .setParameters(oracle.cabo.ui.collection.Parameter[]) function. I am setting the parameters using
Parameter class object.setKey
Parameter class object.setValue
But my problem is that I want the value for the parameters at runtime, for which I intend to use SPEL. But I am not able to use SPEL using the setValue method.
So it goes like this in short:
OAAdvancedTableBean.setTableSelection(OASingleSelectionBean)
OASingleSelectionBean.setPrimaryClientAction(FirePartialAction)
FirePartialAction.setParameters(Parameter[])
Parameters.setKey(String)
Parameters.setValue(String) --- In case of value I want to give SPEL as an argument as I get the value at rutime
Is that any other way in which I can set the value for the parameters using SPEL?

Hi,
I got ur point.
Although i have never tried.........Can you try using method
Parameters.setValueBinding(new OADataBoundValueViewObject(<single selectionbean>,<vo attr>))
In this way without the use of SPEL, you will be able to achieve the functionality!
Try this and get back to me!
--Mukul
Message was edited by:
Mukul Gupta

Problem in setting the target directory in communication channel

Similar Messages

Maybe you are looking for