Problem in setting up in update rules

Hi,
I am trying to extract data from DB connect. everything all right, i have created Info source and its active. when i have created ODS that is active.but when try to create update rules. Iam getting error massage like this.
"No communication structure exits in version service center for change for info source A.
Regards.
harry

Hi,
try to insert a new infoobject in the communication structure. Activate it. Take off the object and active again.
This should activate all the sctructures and associated programs.
Try to create the update rule then
Cheers,
Jorge Afonso

Similar Messages

Problem in setting participant in business rule

Hi All,
I am facing problem while setting the target participant in business rule. I want to route the task to the target participant for the adhoc routing in serial process .It's not taking the value as participant name.
I have 5 participant for approve d task .But when I am writing
If PreviousOutcome.outcome=="'REJECT'"
then
call GOTO(participant:"CTU")
as CTU is one of the participant in the process.
But it gives the error while deploying the application as unknown participant .Please tell me how come I route to different participant as per the condition in serial routing.
please help me.
Thanks & Regards
Aseet

Multi-post:
http://forum.java.sun.com/thread.jspa?threadID=727161&tstart=0

Problem in changing 3.x update rule

Hi gurus,
I have a problem after upgrading from 3.x to 7.
In an update rule, when I insert a constant into a characteristic field, the system displays this popup: "transfer the routine for this characteristic to all the key figures for this update rule?". After say yes, I would like to exit (with green flag) from update rule but it's impossible!
The system displays me again the list of characteristics and then the previous popup.
Can anyone help me?
Best regards.
Simone.
Edited by: Simone.Pompei on Apr 28, 2011 5:40 PM

Hi,
Try different keyboard inputs
- press <ENTER>
- use F4 help
- press F2 (check)
press activate (F3). Works this?
create a OSS message. Only SAP can help you.
Sven

Problem when creating update rules

Hi Friends..
I'm actually having a problem when I'm creating update rules from my cube to my Infosource. This infosource is created by Dierct update of Master data (ZXXXX) Infoobject. the error which is popping up is ,
Data source ZMMOBJ1 not maintained (check your entries)
Message no. RSAU252
Diagnosis
The data source is not active
Can some one guide me, How I can resolve this error.??
and where the problem must have been??
Thanks alot in advance,

Hi,
Check the infosource you are using for the cube. you cant use direct update infosource.
'Direct update of master data' infosource updates into the infoobject.
you will not have update rules for this direct update.
you use update rules only when you use flexible update infosource.
hope its clear.
shylaja.

Missing Update Rules for 0IC_C03 in Business Content

We had a problem with 0IC_C03, so we decided to reload from Business Content and then migrate to 7.0 format again.
However, when we try to gather all of the dependent objects for the InfoCube in Business Content, we only get one set of obsolete update rules (2LIS_40_S278), and the update rules for 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM do not show up. They do not appear under update rules, either.
I know they were there at one point because I activated and migrated the cube once already.
Can someone help us find our lost update rules?

Hi Dan,
There are no update rules deliverd with BI 7.0 for 0IC_C03. There are only
transformations Delivered as part of the content. In the new release
Transformation replace the update rules and the transfer rules.
You have the 3 data sources and the associated transformations to
upload data to the infoCube.
Transformations installed
TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03
TRCS 2LIS_03_BX_TR -> CUBE 0IC_C03
TRCS 2LIS_03_UM_TR -> CUBE 0IC_C03
DataSources installed
2LIS_03_BF
2LIS_03_UM
2LIS_03_BX

"Old" update rule from ODS not working

Hi Gurus,
I need to set up the "old" fashioned update rule to load data from an ODS1 to another ODS2.
The thing is that I need to set up an update rule because I need to implement a Return Table Routine that is not supported (as far as I know) by the new Transformation/DTP.
When I select option (through the right mouse click over ODS1) "Other Options" - "Create Update Rule" it takes me out of the RSA1 and leaves me in the main menu making it impossible to create a new update rule.
The strange thing is that I have this working from and ODS to an InfoCube.....
Suggestions, a workaround??
Andrea.

Hi Jerry,
Just to confirm that this is not working. The tys_TG_1 structure only shows me the target infoprovider structure. Check that in the how to, to be able to derive employee first you need to assign eache source_filed to the result_field leaving employee blank.
I need to have in the same place, the source_field structure (source infoprovider field structure) and the result_field structure (target infoprovider structure). That is what the "old" return table gives me as in the same place I can have the communication_structure (source infoprovider field structure) with the return_table structure (target infoprovider structure).
Just to understand, in the source infoprovider I have 12 Key Figures (1 for each period) and I have to split each incoming record to 12 records. If I work only with the result_field structure tys_TG_1 and the result_package tyt_TG_1 I'm not able the see those 12 KF.
So... return table functionality is not fully supported by BW 7 as far as I know.
Any other ideas why I'm not able to create the old Update Rules from an ODS?
Regards,
Andrea.

Keyfigure display in update rule is not there!

Hello Experts,
I followed the steps provided to create the snap shot ods for stock initialisation based on the how to inventory management document.
I created three key figure info objects and created a ods as given in the document!
When I create update rule the key figures are not shown in the update rule but it shows the units in the update rules that are used by the key figures!
I gone through the OSS Note, the information is to have support package 10 implemented but we have support package 21(SAPKW35010 but already we have SAPKW35021) (BW 3.5)
Still the problem Exists while creating the update rule!
Suggest me where I am wrong!
Points will be awarded
Regards
Ram

Hello,
Help me on this issue please!
if further informations are needed or my question is not clear please revert me back i will give more information!
Thanks in advance!
Regards
Ram

Update rule problem('No keyfigure is set to update')

Hi
Iam trying to create one more update rule on a cube which is having already update rule and connected to datasource.
But iam unable to create on it. It was giving an error i.e
'No keyfigure is set to update'. And iam unable to see the keyfigures of second cube as it was showing only First cubes keyfigures. What can be the problem.
Could u plz tell me how to rectify it.
Regards
AJay

Hello Ajay,
Did you ensure that you are assigning the correct Infosource or the ODS object while creating another set of update rules. Key figures, by default are set to no update. So you need to map the key figures with source key figures or you can compute a specific key figure with a formula or a routine.
Hope this helps.
Kind Regards,
Shravan

Master Data lookup in Update Rule problem

Hi all,
I am currently having a problem loading data to an InfoCube using flat files.
The architecture is as follows:
1) The source of the data is a flat file
2) The data is loaded thru an Update Rule and is of type Full-Update
3) The Update Rules determines the Profit Center using the Master Data of the WBS-Element
4) The data is written in an InfoCube
This solution however does not always work as planned. In the following situation a problem occurs:
1) The flat file contains WBS-element RD.00753.02.01, which has a Profit Center attribute value 8060
2) When I load the flat file, the PC value 8060 is written into the row in the InfoCube, which is correct
3) Then I change the master data of the WBS-element by setting the Profit Center attribute value to 8068
4) I run the Attribute Change Run
5) Then i load a flat file again, which also contains WBS-element RD.00753.02.01
6) The master data attribute value should now write the value 8068 into the InfoCube. HOWEVER, this is when the evil occurs. BW does not write a PC value of 8068, but it write the value 8060. This is wrong.
Why does BW not take the newest version of the Master Data to performe the attribute value look-up? Or why doesn't BW write the correct Profit Center into the cube?
Thanks,
Onno

Hi Ricardo,
The debug via PSA simulation of the update indicates that the CORRECT Profit Center value is to be written into the InfoCube.
However, if I check the contents of the cube (after the load has finished) using the request-id the WRONG Profit Center value is shown. This indicates that the correct Master Data is used, however the update of the Cube is wrong. Why does this happen. the load is of type full-update, so should add a new row in the cube using the value in the data from the UR.
Onno

Update Rule Routine Problem

Hi
i have wriiten a update rule routine.
in that routine i am fetching comp code ,GL Acct. from SKB1 table and match those records wth Data Package records.
Data Package has both Open and Closed items. so i need to match the Comp Code and GL Account which i have fetched from SKB1 with Data Package Comp Code and GL account which records will be matched they will go to Target ODS otherwise Delete from Data Package.
But data is not coming properly in Target ODS.
i have debug the routine and found , there are 10 records(Comp Code + GL Acct.) has been fetched from SKB1
and Data Package has Total 416 Records. Only 20 Records has been gone to Target ODS while I have seen the 216 Comp Code and GL Account combination has been successfully matched with 10 Records of SKB1
Below is the code in Start routine.
Note: Data Package has Multiple Records for a Combination of Company Code and GL Account which is present in SKB1.
How can i resolve this problem.
********Logic to Fetch Open items GL Account**************
*Fetch data from SKB1*********
SELECT /BIC/ZMCFBUKRS
       /BIC/ZMCFSAKNR
       FROM /BIC/AZOCFSKB100
       INTO TABLE TB_ZOCFSKB1
       FOR ALL ENTRIES IN DATA_PACKAGE
       WHERE /BIC/ZMCFBUKRS = DATA_PACKAGE-COMP_CODE
       AND /BIC/ZMCFSAKNR = DATA_PACKAGE-GL_ACCOUNT
       AND /BIC/ZMCFXOPVW = 'X'.
***Fetch records from FI GL Data Package which match with
***internal table TB_ZOCFSKB1
LOOP AT DATA_PACKAGE INTO WA_DATA_PACKAGE.
READ TABLE TB_ZOCFSKB1 INTO WA_TB_ZOCFSKB1 WITH KEY
/BIC/ZMCFBUKRS = WA_DATA_PACKAGE-COMP_CODE
/BIC/ZMCFSAKNR = WA_DATA_PACKAGE-GL_ACCOUNT
binary search.
      IF sy-subrc ne 0.
        DELETE TABLE DATA_PACKAGE FROM WA_DATA_PACKAGE.
      ENDIF.
***Clear Work Area****************
      CLEAR WA_TB_ZOCFSKB1.
      CLEAR WA_DATA_PACKAGE.
    ENDLOOP.
***Refresh internal table*********
   REFRESH TB_ZOCFSKB1.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
Edited by: AtulMohan Mishra on Feb 9, 2011 11:22 AM

Hi,
It is very important that you SORT the internal table before you do a READ with Binary Search.
SORT TB_ZOCFSKB1 BY /BIC/ZMCFBUKRS /BIC/ZMCFSAKNR.
You are sure to miss results unless you do.

Update rule problem - while data load

Hi friends,
I got the following error while doing initialisation for 2lis_02_sgr.
"ABORT was set in the customer routine 9998
Error 1 in the update "
In the forum i searched for this error and this error is something related to the start routine in my update rule.
But i dont know whats wrong with my routine.
Im giving the start routine below,pls go through this and give me your suggestions..
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
<i>TABLES /bic/AZMM_PUR100 .
DATA: T_PUR1 LIKE /bic/AZMM_PUR100 OCCURS 0 WITH HEADER LINE.</i>
$$ end of global - insert your declaration only before this line   -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
     INCLUDE STRUCTURE /BIC/CS2LIS_02_SGR.
TYPES:
     RECNO   LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
           MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
           DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING    RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
if abort is not equal zero, the update process will be canceled
CLEAR: T_PUR1[] ,
         T_PUR1,
         ABORT.
SELECT * INTO TABLE T_PUR1 FROM /bic/AZMM_PUR100.
IF SY-SUBRC EQ 0.
    SORT T_PUR1 BY DOC_DATE
                   DOC_ITEM
                    DOC_NUM.
ELSE.
    MONITOR-msgid = sy-msgid.
    MONITOR-msgty = sy-msgty.
    MONITOR-msgno = sy-msgno.
    MONITOR-msgv1 = sy-msgv1.
    MONITOR-msgv2 = sy-msgv2.
    MONITOR-msgv3 = sy-msgv3.
    MONITOR-msgv4 = sy-msgv4.
    append MONITOR.
if abort is not equal zero, the update process will be canceled
         ABORT = 1.
ENDIF.
   ABORT = 0.
$$ end of routine - insert your code only before this line         -
ENDFORM.
Thanks & Regards
Ragu

thanks gimmo and a.h.p,
i have done the correction as you said,pls verify that.
And also kindly explain me what is the reason for this start routine,what exactly it does???
CLEAR: T_PUR1[] ,
         T_PUR1,
         ABORT.
SELECT * INTO TABLE T_PUR1 FROM /bic/AZMM_PUR100.
IF SY-SUBRC EQ 0.
    SORT T_PUR1 BY DOC_DATE
                   DOC_ITEM
                    DOC_NUM.
abort = 0.    ( added abort = 0 as per your suggestion )
ELSE.
    MONITOR-msgid = sy-msgid.
    MONITOR-msgty = sy-msgty.
    MONITOR-msgno = sy-msgno.
    MONITOR-msgv1 = sy-msgv1.
    MONITOR-msgv2 = sy-msgv2.
    MONITOR-msgv3 = sy-msgv3.
    MONITOR-msgv4 = sy-msgv4.
    append MONITOR.
if abort is not equal zero, the update process will be canceled
         ABORT = 1.
exit. ( added exit as per your suggestion )
ENDIF.
   ABORT = 0.
$$ end of routine - insert your code only before this line         -
ENDFORM.
Thanks & Regards
ragu

Problem in the update rule routine in BIW production

hi,
I have encountered a problem in the update rule, the problem is, there is a routine to calculate the age of a person, age is a key figure,
The problem is that the key figure is not being calculated.
we had encountered the same problem in the bw developent, we reinstaled the update rule, and the age was calculated correctly. Where as in production we cannot instal from business cotent, should we transport the perticular update rule once again?
if there is any other solution, please let me know.
Thanks in advance.
regards chetana.

I think retransporting is the only option available to you. You cannot modify anything in your production system.
IF you have a chance to speak with basis people,ask them to open the system status to modifiable for few minutes.
and make necessary changes in production and bring it back to normal (This is not a best practise in all situations).
hope this helps.
Praveen

Problem in update rule

Hello
The update rule for 0HR_PA_0 calculates the age in years by using routine . But I am not getting that while executing the query .

Raghavendra,
Try to debugg the Update Rule. you will what is happening in the Update Rule.
Bottom line when you face problem with Data inconsistensy or data miscalculation, if you use UR on that field, try to debugg the Update Rule from the Monitor Screen. You will get the Problem. At runtime you will know what values are getting populated.
For Debugging the UR:
Monitor Details Tab> Data Package> right click> simulate Update> select Update Rule in the Next screen. debugg that Package.
if we can provide the code, we can look into it.
All the best.
Nagesh.

Update Rule problem

Hi frndz,
I have one query regarding update rule.
i want to ask you the question that while defining the routine on particular keyfigure is it requierd to maintain the sequence of the field as it is in cube.
Like i am facing a starnge problem i have just now updated system to 3.5 now my problem is i have a master data material in that i have wriiten few update rule on specific fields,now when i am loading the data in material master data few of the material having the value others dont have.
i think some problem lies in update rule i have checked correctly every thing is fine with the update rule,
can any one suggest me why its behaving strangely.

i have tried that but no where i am getting the problem.
like after debugging i got the value correctly till the PSA but its not going correctly in data target.

Time consuming problem in Self update rule

Hi all:
We have time consuming problem in self update rule.I have ODS ZOMS001,for this we created self update rule.In process chain we include this self update rule and during delta update,it takes 20 to 25 mins even if there is two records or 10000 records.In delta for this self update rule,it takes the whole records in ODS
EX: If i have 10000 records during initialise and 10 records in Delta update...For the delta self update rule it takes 100010 records..But it only update delta records values.
we have to reduce the total time consuming for this self update during delta..
Waiting for your inputs.
It would be helpful for your valuable reply.
Rgds
MSK

I think retransporting is the only option available to you. You cannot modify anything in your production system.
IF you have a chance to speak with basis people,ask them to open the system status to modifiable for few minutes.
and make necessary changes in production and bring it back to normal (This is not a best practise in all situations).
hope this helps.
Praveen

Problem in setting up in update rules

Similar Messages

Maybe you are looking for