Problem in setting up XCM Configuration for Local Server

Hi
I have installed Local J2ee engine on my computer and have deployed E Commerce B2B B2C sca packages.
I am trying to complete the XCM configuration for my Local Engine. For below 4 links, I have done the configuration, creation of JCO, Shop, etc is done and have tested the JCO, the test is successful. JCOs are pointing to ECC 6.0 which is development server and on development server the XCM configuration is working fine.
http://<host>:<port>/b2b/admin/xcm/init.do
http://<host>:<port>/b2c/admin/xcm/init.do
http://<host>:<port>/isauseradm/admin/xcm/init.do
http://<host>:<port>/shopadmin/admin/xcm/init.do
But below 2 links are not working and I am getting "Page can not be displayed" error.
http://<host>:<port>/isauseradm/init.do
http://<host>:<port>/shopadmin/init.do
I need to created 2 shops in http://<host>:<port>/shopadmin/init.do but since the page is not displaying I am not able to proceed and hence when I try to login to b2b b2c application
http://<host>:<port>/b2b/init.do and http://<host>:<port>/b2c/ init.do , I am getting an error
"The shoplist read from buffer is empty",
I think this error can be resolved by creating 2 shops in http://<host>:<port>/shopadmin/init.do, but
http://<host>:<port>/shopadmin/init.do itself in not displaying.
Please can you help.
Thanks
Edited by: Neha Bhatia on Jun 4, 2009 10:31 PM

Hi
I checked the mentioned Patch Levels, everything seems to be fine.
After I did few changes in JCOs and checked the XCM configuration throughly shopadmin URL (http://<host>:<port>/shopadmin/shopadmin/init.do) has started working.
Now I have maintained 2 shops and can see the B2B and B2C web portals fine.
But as soon as I select any material, it is giving error saying error in XCM configuration related to IPC.
could you pleaase help me out with this?
Also, as soon as I click on the B2B Login link, it dumps.
And useradmin URL http://<host>:<port>/isauseradm/useradmin/init.do is still giving "Page can not be displayed",
These problems are related to XCM configuration, but not sure where exactly and which configuration is missing. please can you suggest ? Any XCM configuration related document will also be helpful.
Regards,
Neha

Similar Messages

How to set a global configuration for Value Interaction

Hi there
i have this problematic situation about some of my dashboards, cause i need to set the same configuration for all of them in the part of the value interaction,
some of there have in the "default situation" drill and others have "navigation"
exist a config for this?
regrats

Hello Pavel,
>> … and then on the login page I created a process …
A typical APEX login page includes a process called Clear Page(s) Cache, with a sequence of 30. If the process you have create has a higher sequence (>30) it will see a null page values as they have been cleared already.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Problems Oracle 9iDB and ASO Configuration for Cybersafe

Oracle 9iDB installation on Solaris with ASO option
Objective
My objective is to configure Oracle 9iDB, Release 9.0.1 ASO on Solaris for external authentication using Cybersafe ActiveTRUST, which is a Kerberos, based authentication product.
Question
Getting ORA-12641: Authentication Service failed to initialize when trying to connect to Oracle 9iDB using sqlplus from a Oracle 9i Client machine, when ASO is configured for Cybersafe authentication on both Oracle 9iDB and Oracle 9i client
Can anyone help me setup Oracle 9iDB and Oracle 9i client for ASO using Cybersafe Authentication?
Environment
1. I have a Solaris box as my Oracle 9iDB server
2. I have an NT Server as my Authentication server and Oracle 9i Client.
Installation Procedure
I installed as per the steps given in the doc, Oracle Advanced Security Administrators Guide, Release 9.0.1
Authentication Server / Oracle Client setup (NT Server)
I installed on the NT Server the following
1. CyberSafe ActiveTRUST 4.0 Security Server on the NT Server, which acts as an Authentication server.
2. CyberSafe ActiveTRUST 4.0 Security Client
3. Cybersafe Application Security Toolkit (GSS runtime libraries) as needed by Oracle ASO setup procedures.
4. Oracle 9i Client, custom installations with ASO option.
Oracle 9iDB Server Setup (Solaris Server)
I installed on the Solaris Server the following
1. CyberSafe ActiveTRUST 4.0 Security Client
2. Cybersafe Application Security Toolkit (GSS runtime libraries)
3. Oracle 9iDB server, custom installation, with ASO option selected.
Installation of all the above components is successful.
Note: Installation of Oracle 9iDB server with ASO option never prompted me to choose a Authentication mechanism like Cybersafe, or Kerberos or Radius etc..,
Note: Oracle 8.1.7 DB installation on NT actually prompted for Authentication mechanism selection.
ASO Configuration:
I configured ASO on the Oracle server and client side as mentioned in chapter 5 of Oracle Advanced Security Administrators Guide, Release 9.0.1
I created an external user in Oracle, [email protected] as mentioned in http://download-uk.oracle.com/otndoc/oracle9i/901_doc/network.901/a90150/1004747
I configured the NT server, Oracle 9i client for ASO using Net8 Assistant and I have the sqlnet.ora file.
ASO Problems:
Once I have configured both Oracle 9i client and 9iDB server for ASO, I am not able to log in to the database using sqlplus /@cybr.
It returns with an error ORA-12641, saying Authentication Services Failed to Initialize.
I could not get much help from questions posted on metalink on ORA-12641.
It looks like Solaris 9iDB could not recognize cybersafe even though, Cybersafe is listed as one of the installed adapters, when I ran # $ORACLE_HOME/bin/adapters. From this, it looks like Cybersafe adapter is linked to ASO.
Oracle Server is not able to initialize authentication services and call the authentication server at all.
Can anyone help me setup Oracle 9iDB and Oracle 9i client for ASO using Cybersafe Authentication?

The problem has been resolved after providing cn=orcladmin instead of orcladmin for the OID user admin user. Now the overall sso solution is working fine with ADF applications.
Regards,
S R Prasad

Solman_setup configuration for local client copy

Dear Experts,
We made a client copy from 100 to 110 in solution manager 7.1,But solman_setup configuration is missing. how we can copy the java solman_setup configuration also?

Hi Prathish,
always welcome.... but I hope you have understood now that solman doesn't support multi client concept.
There is nothing wrong technically to create a new client but you need to know which functionalities/module within solman support client dependent or client independent configuration
for e.g Monitoring Template are not client specific ..check below FAQ link
Monitoring and Alerting related FAQ - Technical Operations - SCN Wiki
hope this helps your understanding further...
Thanks
Prakhar

Problems with setting up my ISP's mail server in Windows Live Mail and Thunderbird

The laptop is a G60-535DX with Windows 7 64 bit. I've managed to setup my gmail account fine in Live Mail, but when setting up my ISP' mail server, it doesn't work. I get the message that the information was entered correctly, and I see the 'connecting' at the bottom of the page, and then 'error', and clicking on it shows a socket error #10061. In Thunderbird, I get a timeout error message. I've entered all the incoming and outgoing server information correctly, (I've done this over 8-9 times now), the ports are the defaults(110,25), no SSL, no authentication. I've talked with my ISP several times. Just a couple of hours ago was the last time. Their only other possibilities were that Live Mail had problems with setting up more than one account, that Live Mail needed updating, that Windows 7 was a new operating system and there were 'kinks'. I removed the gmail account, set up the ISP's mail by itself; didn't help. I checked for Live Mail updates, but found out that they all come from Windows updates(which are current). The folks on PCQ&A inform me that they have 3 or 4 accounts with Live Mail. I can get my mail, by logging onto my ISP's website, but that' kind of a nuisance. I posted this in Seven Forums and they didn't have any ideas. As I said, I also can't get my mail server to work in Thunderbird, either. I don't know what else to try. (short of activating the recovery partition and starting from scratch). Any ideas would be more that welcome.
Thanks,
Steve

Stevehiker wrote:
Nevermind, it's fixed. One of the guys on PCQ&A suggested going to my ISP's website to see if they had a support page. They did and it stated that under certain circumstances that for the login ID the whole email address should be entered. For XP and Outlook Express one only uses the first part of the email address (your name); so just for grins I entered the whole address, name and all and everyting worked. Called my ISP and was told that that wasn't the way it's supposed to work. Well----
Thanks anyway,
Steve
Mine works the same way_must enter full email address as login. AT&T?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Cannot set up data source for SQL Server 2005

Is it possible to use Microsoft's Beta 2 version of the SQL Server 2005 JDBC driver with WebLogic 9.0? I've downloaded the driver and added it to my server classpath, but when I try to create a new data source using the admin console, the drop-down list for Microsoft SQL Server only contains drivers for the 2000 version. If I select "Other" from the list and try to move on, I get a cryptic, page-long error on the admin console. If I just select the 2000 driver and try to manually modify the parameters on the next set of screens, I still get errors when I try to test the configuration. I've successfully used a third-party driver before, but this one does not seem to be working. Any help would be greatly appreciated.
Regards,
Sabrina

SabrinaL wrote:
Is it possible to use Microsoft's Beta 2 version of the SQL Server 2005 JDBC driver with WebLogic 9.0? I've downloaded the driver and added it to my server classpath, but when I try to create a new data source using the admin console, the drop-down list for Microsoft SQL Server only contains drivers for the 2000 version. If I select "Other" from the list and try to move on, I get a cryptic, page-long error on the admin console. If I just select the 2000 driver and try to manually modify the parameters
on the next set of screens, I still get errors when I try to test the configuration. I've successfully used a third-party driver before, but this one does not seem to be working. Any help would be greatly appreciated.
Regards,
SabrinaHere I describe the steps I took to bypass the console in making a new pool.
1 - Edit the script %DOMAIN_HOME%\bin\startWebLogic.cmd to add a line like this:
set CLASSPATH=%CLASSPATH%;\new_ms_driver\beta2\sqljdbc_1.0\enu\sqljdbc.jar
In other words, you have to explicitly add a third party driver's classes to
the CLASSPATH that will be in effect for the server. Just adding the driver
to your window's class path will do nothing.
2 - Go to the directory %DOMAIN_HOME%\config\jdbc, where you will find
files of the name *-jdbc.xml. Each of these represents a DataSource.
Copy one of them, perhaps either examples-demo-jdbc.xml, or
examples-demoXA-jdbc.xml depending on whether you want to make an XA
or non-XA pool. Make you new file's name like the name of the DataSource,
still ending in -jdbc.xml. Eg: MS_Beta-jdbc.xml
3 - Edit this file to change as much as would be clear for the
driver you want. Eg: change the driver class to the class you want,
the user name, URL, test table etc. Also, change the pool's initial
capacity to 0. This is so the pool can be created without making a
connection. We need that because the password is encrypted, and
there is no manual way for you to add the correct one yet.
4 - go one directory up, and edit the config.xml. Find a
jdbc-system-resource entry corresponding to the original
resource file you copied. Make a new entry in the config file,
like the original, but change the Datasource name to your new one.
5 - If this all went well, reboot your server and go to your data
source in the console, and edit it. Alter the password to what it
really should be, and you can also change whatever else you might
want.
6 - shut down again, and reboot, and you should then be able to go to
your data source in the console and test a connection.
That's it. Here is an example of a jdbc.xml file I made, and
the entry I made in the config.xml:
config/jdbc/newpool-jdbc.xml:
<?xml version='1.0' encoding='UTF-8'?>
<jdbc-data-source xmlns="http://www.bea.com/ns/weblogic/90" xmlns:sec="http://www.bea.com/ns/weblogic/90/security"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/90/domain.xsd">
<name>newpool</name>
<jdbc-driver-params>
<url>jdbc:sqlserver://frogger:1433</url>
<driver-name>com.microsoft.sqlserver.jdbc.SQLServerDriver</driver-name>
<properties>
<property>
<name>user</name>
<value>joe</value>
</property>
</properties>
<password-encrypted>{3DES}cPpx2Z6faqY=</password-encrypted>
</jdbc-driver-params>
<jdbc-connection-pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>5</max-capacity>
<capacity-increment>1</capacity-increment>
<shrink-frequency-seconds>900</shrink-frequency-seconds>
<test-connections-on-reserve>true</test-connections-on-reserve>
<test-table-name>SQL select 1</test-table-name>
<profile-type>0</profile-type>
</jdbc-connection-pool-params>
<jdbc-data-source-params>
<jndi-name>newpool</jndi-name>
<global-transactions-protocol>TwoPhaseCommit</global-transactions-protocol>
</jdbc-data-source-params>
<jdbc-xa-params></jdbc-xa-params>
</jdbc-data-source>
config.xml entry:
<jdbc-system-resource>
<name>newpool</name>
<target>examplesServer</target>
<descriptor-file-name>jdbc/newpool-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>

Financial Reporting Studio 11.1.2.1 PDF not Configured for Web Server

I have installed EPM 11.1.2.1, and HFM, Planning, Essbase, Financial Reporting are all working fine except when I do a report preview in the Workspace an error is received that PDF has not been configured for this Web Server.
I have uninstalled PDF and Financial Reporting then re-installed them but I am still getting the same error. Also, I when I tried to view report from Workspace in Financial Reporting Studio, I received the following error:
error number 400 Error Description:Form already displayed; can't show modally. Function: ShowMsg. Module:GblMethods.
Your help would be gracefully appreciated.

You should review all installation guides, readmes, and the certification matrix before performing a Hyperion Installation and/or Upgrade.
Version 9.0 of Ghostscript is not supported, install ghostscript 8.6.3 - 32-bit.
From the 11.1.2.1 Certification Matrix: "Either: --Adobe Acrobat Distiller Server 8.0 or 6.0 --GPL Ghostscript 8.63; AFPL Ghostscript 8.54 or 8.51; or GNU Ghostscript 7.0.6"
From the 11.1.2.1 Installation Guide Page 110: "Ensure that a supported 32-bit version of Ghostscript is installed."
See http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls
http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121.pdf
Regards,
John A. Booth
http://www.metavero.com

How to set up different realms for each server ?

I am using weblogic 6 sp1.I have a domain with several servers. i want to assoicate or use different custom security realm for each server.However -on weblogic console- there is no 'Target' tab in the Security node ,and no way to set up multiple Security nodes.How ca i do this (or can i)?

Main reason why is this:
Imagine situation I have 2 servers A and B both of them bellongs to domain SomeDomain.
Server A is as WebServer and server B hosts all EJBs. And server A is outside
firewall (does not have DB access). But i would like to use RDBMS realm so what
to do in this situation. Place both servers in different domains and in server
A install proxy realm for RDBS realm ?
"Tom Moreau" <[email protected]> wrote:
>
You can't have a different realm for each
server. There is only one realm for all
servers - think of it as there is only
one set of authentication & authorization
information (that is users/groups/permissions)
and it applies to all servers.
Why do you want each server to have its
own realm? If someone tries to log in,
do you want WLS to automatically route
them to a server who is capable of logging
them in? I'm having trouble understanding
why you want this feature.
Thanks,
-Tom Moreau
Rachel <[email protected]> wrote:
I am using weblogic 6 sp1.I have a domain with several servers. i want
to assoicate or use different custom security realm for each server.However
-on weblogic console- there is no 'Target' tab in the Security node
,and no way to set up multiple Security nodes.How ca i do this (or can
i)?

Problem Using JSQL level 4 driver for SQL Server 2000

I am having problem , connecting to my Sql Server 2000 ( deployed on Windows 2000 Professional) using Microsoft JSQL level 4 Deriver .
I am doing it with following code,
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
     Connection conn = DriverManager.getConnection
("jdbc:microsoft:sqlserver://192.168.0.232:1433;databaseName=DBNew;user=nakhter;Password=java;");
It gives me following Exception ,
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Login failed for user 'nakhter'. Reason: Not associated with a trusted SQL Server connection.
     at com.microsoft.jdbc.base.BaseExceptions.createException Unknown Source)
     at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
     at com.microsoft.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
     at com.microsoft.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
     at com.microsoft.jdbc.sqlserver.tds.TDSLoginRequest.processReplyToken(Unknown Source)
     at com.microsoft.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
     at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
     at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown Source)
     at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
     at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
     at java.sql.DriverManager.getConnection(DriverManager.java:517)
     at java.sql.DriverManager.getConnection(DriverManager.java:177)
I am usign my windows authentication usrname and password .
I has tried it with user "sa" but still same exception .
Could someone help me in this regard ?

You need to switch SQL server to just use SQL Server authentication or both. The problem is that it is looking for a Windows NT account for nakhter with the password java. We get this all the time on new SQL Server installs if you just take the defaults.

Is it possible to set a port number for a server as a value from env ?

Hello,
I'm using the version 6.1 - sp8 and I'd like to set the port number of a server as a value returned by an environment variable. Will this be achievable somehow through the admin console?
In fact, I have an environment variable called '$WEB_SERV_PORT'. I'd need this value to be assigned as the port number for a server. The reason why I am trying to do this is coz I have multiple instances running as different batch accounts and each batch account would be having its own '$WEB_SERV_PORT' which would be the port on which iplanet would be running for that batch account.
I'd appreciate if anyone could help.
Thank you,
Presley.

Hello Sriram,
Thanks for the info that you have provided. I do agree that what you said would be a better approach.
However I've got a couple of questions on the approach that you have suggested (Sorry that its a bit off from the main topic). Just wanted to clarify if what I thought is in sync with the approach that you suggested.
1. As you said, I could setup multiple virtual server within an instance (https-<hostname>) - Does this mean that I am creating "Virtual Server Classes" for each server and through the web-applications tab, assigning the corresponding war file to each Virtual Server Class?
2. Another approach that came upto my mind is that I could create different instances like (https-virtual server1, https-virtual server2, https-virtual server3 etc..). I am assuming that if I follow this approach, I could have each server allocate memory indiviually to the virtual servers. for eg, I could allocate
1024 MB to each virtual server where as in the first approach, I would have to make the 1024 MB to share between all the Virtual Server Classes. And also, in the case theres an issue with one server, I could handle the start/ stop etc individually, where as in the 1st approach, all the virtual classes would be affected by the start/stop. Am I assuming it correctly ?
I'd appreciate if you could let me know.
Thank you,
Presley.
Edited by: pressley on Mar 26, 2008 7:04 AM

Minimum configuration for osx server?

I am getting a MacBook to add to an all-windows environment and want to use time capsule for backup. in addition, I'd like to run iTunes on a system so I was thinking about hitting eBay for a used mini that would be used for backup and media streaming. What is the minimum specs from a memory and CPU standpoint should I look for? Currently I have a windows server and NAS and have ~20 years of tech experience, but all on the windows, netware and x86 side.

Mac OS X supports up to 10 Users for File Sharing, so if all you need is File Sharing, the complexity of Server is not needed.
If you have another reason for requiring Server, its requirements are similar to Mac OS X of a similar version. Server is an I/O problem, so fast drives are needed, and a little bit more RAM than a "regular" desktop system. In Mavericks, running Server on a Mac used as a regular workstation is NOT recommended.

[solved] kernel configuration for clarkdale server

Update: I guess since the arch kernel config works there's really nothing to improve.
Hey everyone,
i'm about to compile a kernel for a server with intel clarkdale hardware, intel i3-530.
Up to now i only compiled kernels for my consumer laptop.
1) Is there any option in particular i should pay attention to when compiling a kernel for a server system?
And regarding the i3-530:
2) Should i just pick x86 generic cpu support or something else?
3) Are there any patches right now to improve support for clarkdale?
Thanks,
demian
P.S.: I guess i should choose 2.6.33-rc7 since real clarkdale support is supposed to come with 2.6.33? Usually i just pick the latest stable version.
Last edited by demian (2010-02-12 11:39:48)

graysky wrote:Your xfers are via scp... are the files large or numerous small files? Have you the ability to use jumbo frames on your network if the network is a GigLAN backbone? If so, you'll have to test to see if a non-standard 4000 or 9000 mtu size improves xfers.
thanks for your rapid response and i googled about it, but unfortunatelly i dont have a gigLan in the lab but usually all file transfered exceed 5GB of size.
Would the scheduler have a significant impact on performance? The servers are used individually (not sharing load like in a bewoulf cluster)
The disk I/O operations are mostly about writes into the output files (a few number of bytes per write), would reiserfs be superior to ext3 ?
PS.: i'm feeling really stupid for not reading more about the kernel26-lts for it has all the major options i was thinking about.
Last edited by Duca (2009-09-27 18:26:34)

DNS Help: Configure for local and extenal services using same domain name?

Hello all. I'm setting up a 10.5 server, have scoured these great forums and gotten close, but am still stuck. Any help would be greatly appreciated.
My network setup is as follows: Internet (2xT1) > modem > router/firewall/NAT device > XServe > switches > rest of network, clients, etc. Pretty standard, I believe.
I'd like to use this XServe on our local network/intranet/LAN only for OD, networked home directories, AFP, iCal, Time Machine, Print and Software Update.
My website is hosted on an external server.
My email is also hosted on a (different) external server.
Domain is school.edu
XServe name is xserve.school.edu
XServe is 10.0.0.25
I've gone through Apple's recommended DNS setup (supplemented by some great info found here on the forums....), and am able to connect to other Internet sites (with client's DNS server set as 10.0.0.25), but unable to connect to www.school.edu, or send/receive mail to/from mail.school.edu.
In short, connecting to external domains that are NOT related to my school are fine, but I'm unable to connect to any domain that IS related to my school.
If anyone out there can shoot me some notes on how to configure the DNS settings, zones, forwarding, etc. to accomplish this, I'd be VERY appreciative.
Thanks, in advance, to anyone who can help me out.
Cheers,
Tim

In short, connecting to external domains that are NOT related to my school are fine, but I'm unable to connect to any domain that IS related to my school.
If your server thinks it's authoritative for 'school.edu' then you have to add records for every host in the school.edu zone.
For example, if you want to be able to resolve 'www.school.edu' then you have to have a 'www' record. If you want to send/receive mail you have to add an MX record, and so on.
It doesn't matter that you're not responsible for those servers, it's just that since this machine thinks it 'owns' school.edu it will only respond with records in its own zone and won't care about what any other name server says, even if that other name server is authoritative for the zone.
FWIW, that's often why people running stub servers like this choose a separate subdomain (like 'dept.school.edu') so they can leave the main school.edu records on the main server and have full control over a subdomain.

Error while setting up the configuration for XI integration builder

Hi experts,
I am trying to configure the XI integration builder.
I have created an entry in table SPROXSET and created an RFC destination of type G.
After that I am trying to execute the SPROXY, I am getting an error "IFR_HTTP_DEST must not be set in table SPROXSET;"
( IFR_HTTP_DEST is the entry in the table SPROXSET)
Please give me solution to this error....This is very urgent.....
Thanks,
Madhuri.

I am having the same problem:
detail:
I have set the echange parameters
com.sap.aii.server.contextRoot.repository.services=rep
com.sap.aii.server.httpport.repository=50000
com.sap.aii.server.name.repository=xiserver
TA: SLDAPICUST hostname=xiserver
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
returns
im exchange profilealdxi01:50000/rep
=>Check with report SPROX_CHECK_IFR_RESPONSE
givers: Integration Builder data not un
se38 shows a wrong url when debuging
http://xiserver:50000/rep/ifraccess?service=query&type=namespace
any suggesting
sproxy only shows the local entries and not the XI interfaces

Problem in setting a color(back & Fore) to a list in a panel

I have a probem in setting the foreground and Background color of a list which is in a panel.Can anyone rectify the error in my program.I have given the appropriate syntax but the output color of the list is default color(Background is cyan and foregroung is black).
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
public class listcolor extends Applet
     CombaPanel cp;
     public void init()
          setLayout(null);
          setBackground(Color.black);
          cp = new CombaPanel();
          add(cp);
class CombaPanel extends Panel implements ItemListener
     List l;
     String name[]={"C","C++","Java",".Net","VB","Perl"};
     public CombaPanel()
          setLayout(null);
          setBackground(Color.gray);
          setBounds(40,40,250,250);
          l=new List();
          l.setBounds(20,10,150,100);
          l.setBackground(Color.black);
          l.setForeground(Color.red);
          for(int i=0;i<=5;i++)
          l.add(name);
          add(l);
          l.addItemListener(this);
     public void itemStateChanged(ItemEvent ie){}
/* <APPLET CODE = listcolor width=400 height = 300>
</APPLET>*/

Hi Lakshman,
Go to XCM setting of your ICSS application go to
Comonents --> Customer --> ui.
Create new ui element. Over here you can select default language for your ICSS web application. Save it by giving some name like "lan1"
Now go to Application Configuration --> Customer --> <your Configuration>
Here click on "Display" Button of "Advance Setting" go to "ui Data" selection box and select "lan1" from drop down box save it and restart your application.
I hope this will open with your default language which you have set in "uidata " component "lan1"
Regards.
eCommerce Developer

Problem in setting up XCM Configuration for Local Server

Similar Messages

Maybe you are looking for