Problem in Smart form while printing it in POLISH language
Hi All,
I am facing a problem in SMARTFORM and SAP SCRIPT.
I have developed a form in EN language and converted that in POLISH language using SE63 . When the form is printed in the POLISH language "#" is coming for some special characters of POLISH Language . ( e.g. 'Length' should get printed as 'DŁUGOŚĆ' ' but it is coming as 'D#UGO##'')
Please tell me how to handle these special characters in POLISH Language.
Thanks
Hi,
To solve this Basis need to create a new output device type which supports Latin-2 character set (Device type to I2HP4) or change the existing one to support Latin-2 character set.
Thanks
Edited by: dipesh kothari on May 6, 2008 5:33 PM
Edited by: dipesh kothari on May 6, 2008 5:34 PM
Similar Messages
-
In smart form while printing page no.
in smartform iam printing the page no
current page / no. of pages : sfsy-page / sfsy-formpages
if the no. of pages are more than 9 it is printing as star ( * )
if the total pages are 12
ex : 1/ * , 2 /* up to 9/* than 10 /12 , 11/12 , 12/12Refer this link
Re: Smart form to be printed 4 times
You can also print out the page number as "x of y":
&PAGE& / &SAPSCRIPT-FORMPAGES&
Message was edited by:
Judith Jessie Selvi -
Problem in Russian Forms while printing
Hi All,
when i'm printing Russian forms with TimesNewRoman Font,printer is printing some junk texts..but if i am using cyrlicCourier Font,it prints well.
I need to print the form in TimesNewRoman Font.where i have to change the settings???
Thanks
MerlinNote, to print double digit characters( on uni-code enabled printer) we have to use cyrillic fonts.. Ordinary fonts may give junk values most of the time... Use TIMECYR (it is times font for unicode printer)
close thread once your question is answered.
Regards,
SaiRam -
Smartform printing issue in polish language
Hi All,
I am facing a problem in SMARTFORM .
I have developed a form in EN language and converted that in POLISH language using SE63 . When the form is printed in the POLISH language "#" is coming for some special characters of POLISH Language . ( e.g. 'ŁUAŚSĆ' ' but it is coming as '#US#S#'')
Please tell me how to handle these special characters in POLISH Language.
ThanksHi there,
There are many threads in the forum which talk about the accentuated and other special characters, in Polish and other languages. There are also many SAP notes about these issues.
The following can impact the output:
- if your system is Unicode or not
- which device type you use, and what is its code page ("character set")
- which font you use
BR
Sandra -
Replacing Adobe forms with Smart Forms for printing FPM based forms
Hello All,
This pertains to HCM Process and Forms with Floor Plan Manager (FPM) based forms.
SAP has provided Adobe Forms as the standard print option for FPM based forms, as can be seen in the attached screenshot.
We want to use the FPM based forms without using Adobe Document Services (ADS). I am checking the feasibility of replacing the PDF forms with Smart Forms, either through configuration or customization.
System Landscape: ECC 6.0 EhP6
Any inputs or suggestions would be greatly appreciated.
Regards,
Arun.Hi Ketul,
Irrespective of the process or scenario, we would like to use Smart Forms instead of Adobe Forms. As seen in the screenshot, SAP has provided the default option of generating a PDF form. This requires installing and using Adobe Document Services. We would like to remove this dependency on Adobe Document Services.
Instead, we would like to use Smart Forms for printing purposes.
This requirement is not tied to any specific process or scenario, but to any business process implemented using HCM Process and Forms framework.
Let me know if you need any further clarifications.
Regards,
Arun. -
Error when exexuting a smart form from print program
Hi,
I have created a Print Program & Layout Set [Smart Form].
Now when i executed Print program it is throwing following error.
As internal table that we are passing to F.M is not having any data i have appended some data in debug mode.
After htting Print Immediaely Button Following EXIT Error is coming.
No table is currently processed, switching lines is not possible.
Message no. SSFCOMPOSER 183
Diagnosis
You tried to switch to the next table line, but currently no table is open for output.
System Response
The system issues an error message.
Procedure
This is probably an internal error. Please contact the SAP hotline and report the problem.
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.Make sure that you have proper definations of internal table in program and smartform.
Regards,
Amey -
Hi,
Good day guys
Ive dev the smart form for workshop invoice.. everything fine but they need sort the stracture one which is LBBIL_IT_GEN.
so ive created the custome stracture ZLBBIL_IT_GEN and added the numaric field at end of the strc.
move-corresponding gs_it_gen to ZLBBIL_IT_GEN1.
lv_num = lv_num + 001.
ZLBBIL_IT_GEN1-MTART = GV_MTART.
ZLBBIL_IT_GEN1-num = lv_num.
sort ZLBBIL_IT_GEN1 by num.
Move-corresponding ZLBBIL_IT_GEN1 to gs_it_gen.
I think, it wont be work out. bcoz stracture doent hold the data..... how to over come the problem.. sorting is very imp for fun guys..
regards
chanduHi,
Actually ive a condtion.. if the material type [mtart] is "yser" .. in the material column should be blank.. the the material type is zrsa. then it needs to print materail and description.
Material Description
xyz
abc
laptop
123 abc
compu
456 pen
678 book
if see the the 5 th item get the blank ..so there is prob.. first needs to gets the all blanks then print one who having the mateiral and description.
but its prints right way.. bcoz its comes based on material type.. but need to sort this....
how to do it..plz let me know
thanks
chandu.P -
Print portrait orientation smart forms zebra printer
Hello,
I have designed a label with smart forms. The dimensions are the following: width = 11 cm. Height: 15 cm. The label has been designed in portrait form but the zebra 105 SL printer print it in landscape format. Does Anybody knows how to fix this problem ?
Thank you.Hi,
You didn't check your printer settings in Printers and Faxes in control panel. It cannot happen the way you say.
Feel free to revert back.
--Ragu -
Hi,
There seems to be a problem with printing my Logos on Smart Forms. In the Print Preview it shows but when I print the same it does not show in the printout, but a dark band gets printed. Also I tried to see the same in SE78 The print preview comes but when I take a print out nothing gets printed but just a number gets printed. I think there has to be some printup setting which I havent looked up can anyone please tell me.
Regards
Yao Chhanghi yee,
that''s not a problem with layout design or abap code,
that's a problem with printer(some printers only can support for this functionality) or with printer setting.
regards...
seshu. -
hallow
hi doing a smart form and in the print preview i see my page and its o.k. the problem is when i send the page to the printer noting is happen .
when i send from my computer a word document its working what is the problem can be .
i use a report program that call to smart function.
thankesHi antonio,
do you have set the CONTROL_PARAMETERS?
i do it like this:
CLEAR: CONTROL_PARAMETERS.
CONTROL_PARAMETERS-NO_DIALOG = 'X'.
it works OK.
Regards, Dieter -
Problem with Smart Form ('RLE_DELNOTE')--Please Help
Hello,
I am facing a problem in the smart form.
So far I am printing certificates (QM module) for the finished goods. i.e. first level batches. Now I should incorporate down level batches info also. i.e. semi finished goods info (second, third... level batches). I am not aware of how to find out the semi finished goods info of a finished good. Each finished good may have one or two levels of semi finished goods....The print program i am using is 'RLE_DELNOTE'.
Can any body suggest me what i have to do?
I have tried with FM 'CHVW_BATCH_WHERE_USED_LIST'. But is of no use.....please tell me...
Best Regards,
ShekharTo check to see if you have an OpenGL problem:
In Photoshop choose Edit - Preferences - Performance.
Is [ ] Use OpenGL Drawing checked?
If so, uncheck it.
Close and restart Photoshop.
Does the problem persist?
If so, you probably can correct it with a video driver update.
Don't forget to go back and re-enable Use OpenGL Drawing.
To update your video driver:
Right-click on your desktop and choose Screen Resolution.
In the dialog that comes up, choose Advanced settings.
Click the Adapter tab, if it isn't already current.
What Adapter Type is listed? Note the brand and model.
If it is an ATI model, visit this web site:
http://support.amd.com/us/Pages/AMDSupportHub.aspx
If it is a nVidia model, visit this web site:
http://www.nvidia.com/Download/index.aspx?lang=en-us
Follow the instructions to choose the proper card and operating system.
Download and install the latest drivers for your hardware.
-Noel -
Problem with smart forms.......
Hi friends, I m facing a strange problem while using smart form. I am using values from standard smartform for invoice n just modifying the layout. The problem is tht,the value i m getting is like '14.223,56' bt the actual value that i want should be '14,223.56'. That is the '.' and ',' are interchanged. Please tell me some way by which i can make it right.
Good points will surely be awarded for answers.
Thanks..........Have you checked your user defaults in transaction SU01
under the defaults tab there is a section for decimal notation. -
hi guys,
i have a quetion for you. What ever i say you here is all about EWM 5.1(seperate instance)
i have a standard smartform /scwm/hu_shplabel.
this i should be using to create a shipping label printing (UCC).
i will tell you wht i did and wht i need.
i copied this standard to a z form and created the frame (windows i needed).
i dont know if this needs a driver program at all to call this.
to my knowledge i know that a method is assigned to this standard form and it calls it.
but most of the coding is done in the form itself using the input parameters.
i need to know
1. do we actually need a driver prog for such forms.
2. if i have to make changes do i do it in driver prog or form itself.( i can see lot of coding in the present form) , the coding is mostly object oriented.
3. i even have a bar code to print in it too.
4. few of the the date to be printed on the label has to come from R/3.
usually i knew the smart form where u write a se38 program to call the form and input the data mostly needed to print. i am new to this kind .
do let me know anything u think.
every information is helpfull
thank you
sidhi seshu
first let me thank you for the information.
standard form has a master window.
and i have to add 8 more windows.
i have come across a similar standard smart form but i came to know that it is associated with a
object and a corresponding class.
so i came to the conclusion that the present smartform might have a associated object and it is responsible of calling the form.
i may not be completely true. do tell me if i am or not.
the present smartform has some code internally and some global parameters added.
it has some input parameters added.
but the current functionality is not similar to what the standard is.
so i didnt understand if i have to code in object or in the form itself.
do let me know wht ever information you have. -
How to use Read_text in Smart Forms for printing Header Texts
Dear ALL,
I want to print Header Texts in SmartForms, For that
I am using T/Code VL02N .. and choosed Header ..
got this details... from Text Header.
Text Name :0080000441
Language :EN
Text ID :Z002
Text Object :VBBK.
So in Smart forms Under Template i have created a text and Program Code .
Inside that I have used this below code .
CALL FUNCTION 'READ_TEXT'
EXPORTING
*CLIENT= SY-MANDT
ID = 'Z002'
LANGUAGE = SY-LANGU
NAME = NAME
OBJECT = 'VBBK'
TABLES
LINES = IT_TLINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8.
IF SY-SUBRC 0.
CLEAR IT_TLINE.
ENDIF.
Kindly suggest me, Where to declare the variables and loops for using this Read_Text Syntax in Smartforms .
Response to this will be highly appreciated........
Regards ,
Vinoth.hi
good
please check this code
CONSTANTS:
*For text reading like in LCNMMFTX / FORM SET_CONTROL_TEXT
text_id like thead-tdid value 'MATK',
text_obj like thead-tdobject value 'AUFK '.
data tlines like tline occurs 0 with header line.
data tdname like thead-tdname.
data tdheader like thead.
if not it_proj-ltxsp is initial.
refresh tlines.
tdname = sy-mandt.
tdname+3 = it_proj-rsnum.
tdname+13 = it_proj-rspos.
tdname+17 = it_proj-rsart.
call function 'READ_TEXT'
exporting
id = text_id
language = it_proj-ltxsp
name = tdname
object = text_obj
importing
header = tdheader
tables
lines = tlines.
exceptions
not_found = 01.
thanks
mrutyun^ -
Sending Smart form to Printer in SRM
Hi All,
I am trying to send a smartform to Printer in SRM ITS. I gave output options and control parameters . When i see the Print dialog box i dont see the Front end printers in that. Normally when we pass LOCL we should see default printer in Print dialog.
When i do print, spool is creating but its not printing at local printer .
I am doing this in SRM ITS ... could you kindly any one tell me what steps need to take to print a smart form at local printer when we call form ?
ThanksHi
Please elaborat, when you need this SMARTFORM to get triggered.
By the way, Have you tried implementaing the following BADIs ?
BBP_CHANGE_SF_BID Smartform for E-Mails to Bidder
BBP_CHANGE_SF_CTR Change Smart Form for Contract Output
BBP_CHANGE_SF_ERS Change Smart Form
BBP_CHANGE_SF_SC Smart Form Shopping Cart Print
BBP_CHANGE_SF_VERS Change Smart Form for Version Comparison
BBP_PROCESS_AUC Process Smart Form with Changed Interface
BBP_PROCESS_BID Process Smart Form with Changed Interface
BBP_PROCESS_CTR Process Smart Form with Changed Interface
BBP_PROCESS_PO Process Smart Form with Changed Interface
BBP_PROCESS_QUOT Process Smart Form with Changed Interface
Hope this will help.
Please rewards suitable points.
Regards
- Atul
Maybe you are looking for
-
Logic set up assistant, where is it in logic 8
where is logic set up assistant in logic 8, it was in logic 7, and i found it usefull, where can i find it in logic 8 ?, please help, thanks
-
A lot of my apps are not running. I tried downloading an app from the app store and it give me a message saying "Cannont connect to iTunes store" and a few of the games and apps i downloaded wont open and/or load... This didnt start until i updated t
-
Java.sql.SQLException: User: fusionEJB3, failed to be authenticated
Dear experts, My intention was to call a pojo, (ProductCatalog) from a servlet (SimpleRestServlet) in order to query a db entity for products in xml form. The original thought was to be able to get the products via a servlet, but the entity manager i
-
Error in multiple condition type switch
Hi, I define a multiple condition as a switch for different processing branches for my Workflow (all my attributes in the conditions are from the object). I defined the Other Values outcome also. When one of the conditions is true I received an error
-
Open With Context Menu acting up
It seems as if using Time machine allows old versions of applications to appear in the "open with" menu. Is that sensible? How can I turn it off? I don't really want to mistakenly open files in old versions of applications....