Problem in Smartform Table/window Line Using Dot Matrix Printer

Dear Experts,
I faced issue in printing smartform using dot matrix printer. In the print result, the table line (horizontal and vertical) is not printed. I already search the forum but none can solve my issue. I already changed the table line width into 30 or 40 TW but still not work. Everything is OK in the print result, except the table line.
If i manually print/write '__' (underscore), it appear in the print result, but to write horizontal line and vertical line manually in the smartform will be huge effort.
I used device type EPESCP9 for the output device.
Can you tell me what i need to do?
your help will be appreciated.
Thanks

Hi,
Check your device type.
http://forums.sdn.sap.com/thread.jspa?threadID=2016838
Jshree

Similar Messages

  • Printing form using dot matrix printer

    Dear experts,
    I have a PO form and when printed using laser printer it works just fine, when use dot matrix printer with continuos form , the form's content started to be printed a bit lower compared to the laser printer, should i adjust the paper size in the se71 ?

    Hi Johannes,
    We have been know to go directly into the printer defintion and adjust the Horizontal and Veritical Shift. This can be found on the Output Attributes in the Additional SAPScript and Smart Form Information area. We give our A4 printers a slight Negative Horizontal and Positive Vertical shift to better center the output on the different paper size.
    Regards,
    Raj

  • Printing using dot matrix printer,problem with landscape printing

    Hi all,
    We are planning to use Dot matrix printers for printing through SAP.We do front end printing using Windows OS. I am able to get prints properly if it is a script form. In case of list outputs, printer is printing the text outside the paper.Only half of the text is printing on the continuous stationary. Actually document is to be printed in Landscape format. So printer should print data vertically on the paper,but it's printing horizontally. I have created sparate output device for this printer.My printer is TVS Electronics HD745 24 Pin heavy duty printer. I have assigned OKI341 as device type for this device.Any more settings I need to do to get printing in landscape mode?

    closing thread

  • Check printing using dot matrix printing?

    HI all,
    I have developed check printing using smartform for laser printer now the my client requirment has changed they are now using a dot matrix printer for check printing, so what parameter should i consider for developing a check printing for dot matrix printing

    the same smartform and driver program will work for all kind of printer.

  • Barcode printing using dot matrix printer

    Hi,
    Can anyone let me know what all DOT Matrix printers support barcode printing (PDF 147 type), The barcode is printed in invoice when printout is taken using laser jet but when using dot matrix (Panasonic kx-p3696), the invoice gets printed  without barcode.
    Thanks in advance.
    Sachin

    closing thread

  • How to set the dimension of main page windows for std dot matrix printer

    Hi All,
    I have to print a form in a pre- printed form which is coming from the standard dot matrix printer( 80 column).
    In the Sap script how i will define the dimensions of main page window .
    The printer is in US .  How i can sets the page dimensions .
    reward point will be provided.
    Regards

    Change SEQUENCE = "213" to SEQUENCE = "218" in the Task ID Field component. That will solve the issue.
    --Shiv                                                                                                                                                                                                                               

  • Problem while printing smartform in dot matrix printer

    Hi Experts,
    When i am printing smartform using dot matrix printer only the last page prints but all the pages displays in print privew.
    For example suppose there are three pages to be print 1/3, 2/3 , 3/3 , i get all the three pages in print privew as well as when i take its printout in laser printer i get all three pages as print, but when i am using dot matrix printer i get only the last page ie 3/3 as print.
    Regards
    Varun Sharma

    Hai Varun,
    If things are coming properly then its no more ABAP issue.
    Need to check out with the BASIS team along with the IT / hardware department.
    Just try to take print out on a other dotmatrix printer, if its somewhere close to you as usually they are heavy and large in size can't be moved.
    Hope this helps,
    Cheers,
    Suvendu

  • Reg: Dot Matrix Printer Settings problem

    hello all,
             The problem is with the Character format of Dot matrix printer, the printer is unable to print any graphical line. The line can be seen in print preview but in the actual printout the line is not printed. When the same O/P is printed through normal mode of dot matrix printer it is getting printed in the print out.
    The client want all the Invoices to get printed in this format as it requires least usage of ink.
    with regards,
    sandeep akella.

    hello all,
                 The printer i am using is EPSON LQ 1050 . Does this printer support the graphical line in the character format ? In the normal mode i am able to print the graphical lines,but client want to use only in character mode as usage of the ink would be less.I dont know how to check the compatibility of the printer,can any one help what is the procedure to check the settings..do help me in this regards.
    for above suggestions  do tell me where can i post to get solution from a basis consultant.
    with regards,
    sandeep akella.
    Edited by: sandeep akella on Jan 29, 2009 11:35 AM
    Edited by: sandeep akella on Jan 29, 2009 1:28 PM
    Edited by: sandeep akella on Jan 30, 2009 6:39 AM

  • Right side Text not printing in Dot Matrix Print

    Hi Gurus,
    When i take print of the smartform with Laser Jet Printer its comming fine , but when i print using Dot Matrix Printer the text at right side is not printing.
    Printer model : Epson DFX-5000+
    Can any one tell me how to resolve this..
    Thanks
    Ganesh

    hi ,
      SAPWIN Drivers which support those Epson printers  check in SAP (windows support )
      These will solve your Problem  .
    Regards
    Deepak.

  • Crystal reports printing in dot matrix printer

    I'm using Crystal Reports 2008 with Visual Basic.Net 2008. The problem is that when i print the report in a laser printer, everything is good, but when i used dot matrix printer (like Epson LX 300+), reports is printed smaller than original, doesn't matter if i see good in preview. This is an Asp.Net web form.
    How can i fix this problem

    1) Make sure you have the latest CR Service Pack:
    SP4 https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
    SP4 MSI https://smpdl.sap-ag.de/~sapidp/012002523100008782532011E/cr2008sp4_redist.zip
    SP4 MSM https://smpdl.sap-ag.de/~sapidp/012002523100008782522011E/cr2008sp4_mm.zip
    2) Make sure you have the latest updates for the printer driver
    3) Make sure the printer driver is Unicode compliant
    4) Experiment with the "No Printer" option and Dissociate Formatting Page Size and Printer Paper Size option
    5) Compare print from the CR designer to the app print. Do you see the same issue with both?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Output a shaded box in SAPScript with Dot Matrix Printer

    Hi guys,
    Is there a way to print a shaded box in Sapscript using Dot matrix printer?
    BOX XPOS '4'CM YPOS '2.8'CM WIDTH '2'CM HEIGHT '0.4'CM FRAME 10 TW INTENSITY 100
    I tried the code as above but it wouldn't work, and doing a search on this forum tells me box command wouldn't work on dot matrix printer. So is there any alternative to do this?

    Hi
    if it is possible try to print the same in another printer and confirm the problem
    no doubt certain printers may create such problems while printing the output
    so to confirm the problem try with other printer.
    Reward points for useful Answers
    Regards
    Anji

  • Removing Currency Symbol in PLD & Dot Matrix printer issue

    Hi All
    I need to know if its possible to remove the currency sysmbol on your print out. I'm printing on a pre-printed stationery and the currency symbol makes the lines to overlap.
    Aonther question is , which font format can you select to for printing when you are using dot matrix printer (OKI Microline 3321 9 Pin Printer)
    When its printing it's printing in bold and on the invoice after the second one , it looses the margin setting and prints on the wrong fields.
    Thanks.
    Bongani
    ( South Africa)

    I tested the Amount function and it works perfectly for your need.
    Add a formula field and in the Content Tab insert the Formula as
    Amount(Field_198)
    Here the Field_198 is shown as an example but you will enter the Field number of the amount field which currectly shows with the currency in your PLD.
    For each such amount field you will need a Formula field to remove the currency symbol.

  • Portrait on 14" width by 11" length continuous feed paper for Dot Matrix printer.

    Hello,
    I am trying to set the properties of a Report Builder 3.0 form for Portrait orientation with 14" width by 11" length continuous form.  The report will print on a high speed dot matrix printer.  My problem is when I change the report property
    to 14" width by 11" length, Report Builder 3.0 automatically changes the Orientation to Landscape!  I want it Portrait on 14"x11" paper!
    Thanks in advance.

    Hi CRC111,
    According to your description, when printing reports in dot matrix printer, it can't keep the Portrait in report property. Right?
    In Reporting Services, it supports printing in a dot matrix printer. However, the dot matrix print is quite different from regular printers. It has reported it can't accept the page layout(landscape and Portrait). In this scenario, we suggest you export
    the report into PDF/TIFF, then print it in dot matrix printer. Please refer to the links below:
    SSRS Printing to Dot matrix printer
    Reporting by using Dot Matrix Printer
    report properties for dotmatrix report in SSRS
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Smartforms table border lines not printing (URGENT)

    HI,
    I am trying to print samrtform table border lines on Epson dot matrix printer, in print preview it showing table borders as thick black lines, while printing it not printing lines. It is printing data correctly. Can any one suggest the soution, it is very urgent.
    Regards,
    MAHESH
    Edited by: MAHESH FADNAVIS on Apr 7, 2008 11:53 AM

    Can you try to print in a different printer, if the error persists then the problem is in the smartform, otherwise raise a note to SAP regarding this. I think that there is problem is with the page format in which u are taking the printout.
    OR
    Can you check if you have selected the framed border in the table border select pattern.
    Hope That Helps
    Anirban M.

  • Printing line beginning aligment problem in dot-matrix printer

    in smart-forms i have two windows with same upper-margin and there is 10 mm space between them.
    i print both of them a text which two rows but in right window begining of text is sliding right , second row of second window begins one or two columns sliding right namely not printing properly texts by beginning in same column in the right window.
    my printer is oki microline 320 line printer.
    why can this be?
    thanks..

    Hi,
    Dot matrix printer.
    Problem with pritning with dot matrix
    About Dot matrix printer device problems
    Regards,
    Sandeep

Maybe you are looking for

  • Connection from SAP ERP 6 to B1i2007

    Hello, the test-connection between B1i and SAP is working, but when trying to test the connection from SAP to B1i, SAP gives the error mesaage that "the program is not registered". The B1i-System seems to be not registered in the SAP and it is only s

  • Problem in creating a list.

    Hello! How do I create a list in an applet? What do I need to import? I have a simple applet below that contains a list. Yet when I compile it, en error message comes up. The error is shown below. import java.awt.*; import java.applet.*; public class

  • Auto Assignment of Business Place in Sales Orders

    Dear Experts, So far my knowledge a business place can be assigned to sales office and if the sales document is with some VAT Tax code it takes business place automatically. But I have sales which is free of tax. Please advise how to assign business

  • IP8720 will not print PDF files

    My iP8720 will not print PDF files. It doesn't matter whether the file was created in Acrobat 8 Pro, Word, WordPerfect. It doesn't matter if the PDF contains images or just text. It does print files from Word and WordPerfect, as well as Photoshop, et

  • Adding to Existing Collections?

    I can select a bunch of images displayed in the Library, click on the "+" in the Collections tab and save the selected images to a new collection. Now, I get some different images selected in the Library, and want to add them to the above collection.