Problem in Speaker
I have a problem with speaker in my Satellite - C665
whenever my system starts after few seconds (nearly 30 to 70 seconds) it automatically stops giving sound...
while i checked the driver problems but there is nothing even volume is showing that sound is producing....
I again works when i disable and enable it's driver just for few seconds again ......
Could anybody help me... plzz
It;s Urgent......
If Anything required i will provide that.,...
So, the iphone bouth in the other country can be a problem If any factory shortcoming, or qualitydeformation will be established,
Similar Messages
-
Problem with Speaker and Headset in Windows Vista
Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
Regards,EdwinWhen you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have). -
I have Iphoon 4 and ihave problem with speaker what i have to do?
I have Iphoon 4 and ihave problem with speaker what i have to do?My problem is no body can heir me.
I have got my IPhoon from London U.K. Now i'm in Saudia ArabiaIf it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I am having problem with speaker the sound is not coming properly from it also the right side hinges
Hi,
I am having problem with speaker from last few days when ever i tryed to play songs the speaker is not giving sound properly. Secondly the the right side hinges also boken so needed support for both the problems.
Thanks & Regards
Umender SahaniFirst, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
If this does not help, set it up as new device, explained here:
How to erase your iOS device and then set it up as a new device or restore it from backups
If still no luck, get it checked by visiting an Authorized Apple Service Provider or contact Apple Support to get it serviced:
iPhone - Contact Support - Apple Support -
Problem with speaker in Skype.
Hello, i have problem with Skype on Xperia Z2, if i missed call (in skype), top speaker will off and would work only for phone calls, but if listen music, play video and game would work only bottom speaker, if sign out from skype and close it in multitask, top speaker will work again.
Someone have this problem?
Sorry for my English.it could be an app acting up, you could re-install the latest update with SUS
Update Service (SUS)
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
Hi,
I have a problem,
I use to drive costumers cars, I don't have any devices to pair to my Iphone5.. but today I drive a car and my Iphone ask me if I want to pair the phone to the car, and I chose "Cancel" ..
since that..
every time I want to play a song the phone acts like if it is connected to a car or some other device, every time I try to make a call, I only can use the hands free speaker or the headphones, because if I use the normal speaker to listen with the phone next to my face, the person that I am calling can listen me, but I dont..
so what I think it happens is like.. the phone connects to the car, the car is with the client, so, now, I can't have the the device "on" to my phone recognise it, so I would be able to delete it..
how do I solve this situation.. how can I delete a device that my Iphone is programed to use it, even when bluetooth is off....Hi jonunes!
I have an article for you that I believe will help you troubleshoot this issue with your iPhone:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
i bought my iphone 4s 2 month ago and now i am having problem with my speaker .I get sound through headphones, but not through speakers. Occasionally I will get sound (clicking when unlocking) but then it goes again. is there any solution or is there any setting for that please help me fast now my iphone 4s is like A deaF.If i clamis for warranty do i get it fixed?
Hi, StarrDutches. Welcome to Microsoft Mobile Community! Let's try to resolve it. Does your phone run with the latest software? Were you able to set your phone via speaker mode while you're in a call? Where are you located, btw? It seems that you're trying to use some of the speech commands, right? You may check this link to see if you're current region is included from the list: http://www.windowsphone.com/en-us/how-to/wp8/basics/feature-and-service-availability. You may also update the phone's system apps from the Settings > swipe left, applications > store > check for updates. Keep us posted.
-
I had problem with speaker phone
i had problem to ask you. i bought Iphone4s when i'm traveld at UK but now it had problem with my Iphone4s the sound of speaker phone looklike alien sounds when i'm open speaker phone or when someone call me. i have some question to ask you. can i change
Hi
I hold the phone about 6 inches from my ear. I don't know of any troubleshooting step; can you suggest any? -
i have a problem with the volume of the speaker . when im talking to someone i can barely hear them . the volume is really really low . and i have it turned up to the max and yet its still really low
whats wrong with it ? n how can i fix it ?
i never updated it before im running 0.31.22 firmwareCould be the ear-piece problem in the phone, have you tested with the loud-speaker and is the volume same?, just to make sure the network reception isn't dodgy. If you find this occuring frequently take it to a Nokia care center and get it checked.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks. -
I have SB Audigy 2 ZS and Genius SW 5. Home Theater speaker system. I've connect it through ac3 input 2 (on speakers) with din-3x3,5mm jack cable to soundcard. But my subwoofer don't play..and when I use a reduction cable for sbw/cen cable then my subwoofer plays and my center speaker don't play..
No, but it's DIN (probably) to 3x 3,5mm jack cable. It was in the package with speakers. And reduction cable was also there (on reduction is written: if u have problem with sound from center or subwoofer use it and probably it will be ok).
Reduction cable is jack 3,5 input to jack 3,5 output...this is answer from Genius tech. support:
,,It seems that there is a problem on your soundcard. There is only one channel output of your sub/center instead of two channels from your soundcard. So when you use the reverse cable, then the output channel will be also reversed. '', but soundcard is OK, i think.
I haven't swapped the cable, but i think cable is ok.
I've found a lot of the same problems in discussing forums on the same configuration...
Thanks for help. -
Crazy Headphone problem? Speaker no longer works in some cases
Gang,
Basically my phone work just fine. But when I get a call I have to put it on speaker phone to listen to anything. Also when I adjust the volume it always indicates Headphone.
and Yes I do not have my headphones in. I looked at the cleaning thing and that is not the problem as the iPhone does detect that the headphones are pulled out.
I restored, rebooted, checked settings, you name it. Nothing comes out of the speakers when you touch the keyboard no clicks and yes these are all enabled.
I have not as of yet enabled Bluetooth devices, but turned that off also.
Everything seems to work fine if I do use the headphone.
Any ideas? driving me crazy...
Thanks
GordonI still think the problem lies in your headset jack. Maybe plugging in/out 20-30 times?
Also, try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If this doesn't work, try restoring. See p. 141 of the manual... http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
Message was edited by: paulcb
Message was edited by: paulcb -
Nokia Lumia 920 voice input problem with speaker o...
My voice input doesn't seem to pick up any sound while having the speakers on. The voice recognition doesn't work, it just says that i didn't hear anything. I'm having the same problem with soundhound, skype and turning speaker on while calling. Someone else having the same issue?
I have the latest Nokia update, and the latest Nokia system apps from the store, i've used the reset sometimes when my phone freezes but the problem's still there. Its really annoying.
I sent my phone on service about a month ago because of another issue, they said thet they changed the motherboard, and that's when this problem started to occur.
I've seen other people on the net with the same problem, but it looks like it's a rare problem. -
Problems with speaker/sound.
Hey Apple Community,
After using mostly head/earphones to listen to media, i.e., iHeart and Netflix, the volume +/-, and speaker do not work.
The only way I can hear any sound is by taking the head/earphones plug in & out.
I used compressed air and reset many times without success.
I do not have problems with phone calls.
Any ideas? Thanks very much.
S.Genao
Bronx, NYhello.
sounds like your computer is defaulting to "optical out" when you're removing your headphones.
go to "system preferences" > "sound" > "output" > then select "internal speakers", and give that a try? -
Just downloaded latest Ipod software and Ipod Touch no longer plays through my speaker dock or FM transmitter in the car. The dock is powered and I can hear the music through the Ipod's own speaker - haven't tried it with headphones.
Can anyone help?
ThanksMy problem started when I downloaded the latest Ipod software. I fixed it by resetting (pressing home and sleep button for 10-15 seconds) and synching and everything's back to normal now.
(see here http://www.ehow.com/how4487140reset-ipod-touch-iphone.html) -
Does anyone have a problem with speaker phone on their Iphone
I notice when I am in the car and if I don't use my jawbone. And I go right to the speakerphone I cannot hear the person, I have to put the phone almost up to my ear in order to hear them. I know when I had the razor it was loud and clear.
I have had the same problem, however, I find if I cup my hand down by the base of the iphone (where the mike and speaker are) the speaker phone is louder. With the speaker in this location you need to have some method of obtaining a "bounce" for the sound back up to your ear. However, I do not believe it is as clear, nor as loud as it should be.
Maybe you are looking for
-
Line items are not showing in fbl3n,fs10n,faglb03,fagll03
hi experts, i am facing a problem to see the line item of inter unit clearing a/c. i am not able to see the line items in fbl3n,fs10n,fagll03 and faglb03. system response is "You have stored account 300000 in company code L001 as a clearing account.
-
Post System Refresh Activity - BDLS run
Hi, We have finished system refresh of a QA system from Production. We need to run BDLS now to convert the original Production logical systems to QA relevant logical systems. I am short of understanding of this process. Can anyone please help me w
-
I have an iMac for work and I am leaving the company. How do I clear the computer so that my soon to be former company is unable to see my personal information Ie. - internet, contacts, etc...
-
Stopping and starting the server for deploying
Hai, When I run a project from the java Enterprise studio, the domain is stopped and then restarted. This takes quite some time. Is it really required for redeploying a project? Is there any way to avoid it? I have included below exerpts of the outpu
-
Hiding values through conditional formatting (colour change)
Hi all, OBIEE version is 10.1.3.4.0. I have some reports where I'm supposed to hide some values as soon as they surpass a certain threshold. Hide, not filter that is. Conditional formatting being the obvious choice I wanted to simply set the colour t