Problem in st03n

Hi,
when i am running st03n it is not showing data of last 2 days means it is not updating data automatically to update data i am using rsstat83 report. please help me out what should i do .

Hi,
Check this SAP_COLLECTOR_FOR_PERFMONITOR job is running 000 client hourly basis.
Check system time and SAP level time zone
Thanks
Siva

Similar Messages

ST03N - No values

Hi,
We have a weird problem. ST03N does not show any values in one of our production systems. It is good in Quality and Config boxes.
Application statistics are fine but the Dialog statistics are not showing up...Let me know if any of you encounter this situation and have a solution.
Your help is appreciated.
Thanks
Raj

Hi Rajender
ST03N is populated by a job called SAP_COLLECTOR_FOR_PERFMONITOR , check that the jobs is running, you can also check that the rest of the SAP_REORG jobs are also running
Hope this help
Juan
Please reward with points if helpful

Inventory Ageing query performance

Hi All,
I have created inventory ageing query on our custom cube which is replica of 0IC_C03. We have data from 2003 onwards. the performance of the query is very poor the system almost hangs. I tried to create aggregates to improve performance but its failed. What i should do to improve the performance and why the aggregate filling is failed. Cube have compressed data. Pls guide.
Regards:
Jitendra

Inaddition to the above posts
Check the below points ... and take action accordingly to increase the query performance.
mainly check --Is the Cube data Compressed. it will increase the performance of the query..
1)If exclusions exist, make sure they exist in the global filter area. Try to remove exclusions by subtracting out inclusions.
2)Check code for all exit variables used in a report.
3)Check the read mode for the query. recommended is H.
4)If Alternative UOM solution is used, turn off query cache.
5)Use Constant Selection instead of SUMCT and SUMGT within formulas.
6)Check aggregation and exception aggregation on calculated key figures. Before aggregation is generally slower and should not be used unless explicitly needed.
7)Check if large hierarchies are used and the entry hierarchy level is as deep as possible. This limits the levels of the hierarchy that must be processed.
Use SE16 on the inclusion tables and use the List of Value feature on the column successor and predecessor to see which entry level of the hierarchy is used.
8)Within the free characteristics, filter on the least granular objects first and make sure those come first in the order.
9)If hierarchies are used, minimize the number of nodes to include in the query results. Including all nodes in the query results (even the ones that are not needed or blank) slows down the query processing.
10)Check the user exits usage involved in OLAP run time?
11)Use Constant Selection instead of SUMCT and SUMGT within formulas.
12)
Turn on the BW Statistics: RSA1, choose Tools -> BW statistics for InfoCubes(Choose OLAP and WHM for your relevant Cubes)
To check the Query Performance problem
Use ST03N -> BW System load values to recognize the problem. Use the number given in table 'Reporting - InfoCubes:Share of total time (s)' to check if one of the columns %OLAP, %DB, %Frontend shows a high number in all InfoCubes.
You need to run ST03N in expert mode to get these values
based on the analysis and the values taken from the above - Check if an aggregate is suitable or setting OLAP etc.
Edited by: prashanthk on Nov 26, 2010 9:17 AM

BW perfomance - query Frontend

Hello
I have a problem.
form st03n
my query
have
40% OLAP%
10% DB
50% front end.
What would the problem?
If I create the aggregate, we can't solve the problem right?
What is the flow?
->frontend input -> olap -> Db -> olap -> frontend output?
Regards
Dank

Hi Dank
Why OLAP is high you already know from the previous replies.
I am concerned about Front End now.
Is this for all the queries?
Do you see network problem?
While you are running the query is it stuck in gateway? ( please involve your basis to check this).
Are you transferring lot of records ?
Please also open the Query Designer and let me know what is the settings for "Access type of Result Rows" for all the characteristics being used in the query. You would find this is "Advanced" tab for a Characteristics
Aggregate should not help here as the time being consumed is 10% only and SAP recommends aggregate if the time is more than 30% .
Can you please also run the query from RSRT in debug mode ( with Display Statistics option) and give the value of DBTRANs and DBSEL ? That will tell you if you need an aggregate or not
BW : Aggregates
Regards
Anindya

Query performance from start to variablescreen in a webtemplate

We have users who complain about performance when starting webtemplates which have some variables. Sometimes the queries run on time out before the variable sreen appears. The variables are open for user input, they are not executetd by a user exit or something.
So I am responsible for administration of the application from IT side, I would be happy to hear about a hint to control the response time in the segment from start to variablescreen so I can find aout the reason for the problem (Perhaps: ST03N, RSDDSTAT which parameter?)
Eva

Check this post:
Webtemplate performance analysis
Hope it helps.
Regards

Os collector not running

Hi,
I've a problem with the os collector on ECC 6.0.When I checked on OS level and run command saposcol -s, it states that the collector is running.But when I go to st03 a message prompted that no system load data is available.I've already restarted the OS collector but the results is just the same.
Regards,
Razman

Hello razman razak,
The SAPOSCOL just collects OS information. So, you will be able to check it using transaction ST06 and not ST03(N). What exactly information do you need? If you want to fix the problem with ST03N, you should check if the standard jobs are running fine. Please review the SAP Note 16083 for more details.
If you still can't find the reason of the error in ST03N, please provide more details about it. What is the mode that you are accessing the transaction? Expert mode?
Best regards,
Rafael Toshiaki

On ST03N "RFC problems: No data available"

Hi,
Can anyone tell me I am getting an error on T code ST03N as "RFC problems: No data available" when I am clicking on last minute load.
Checked the RFC it is working well.
Thanks
Hari Mohan

Hi Hari,
check whether below job running in your system.
SAP_COLLECTOR_FOR_PERFMONITOR
This job should run in client 000 under user DDIC with periodic of one hour.
The program is RSCOLL00
IF cancelled rerun it or if not scheduled sechedule it.
Regards
Ashok

RFC PROBLEM:NO DATA AVAILABLE IN ST03N

Hi experts,
On the t-code ST03 when i enter lastminute's load and confirm, getting the error RFC Problem:No data available.
How to go ahead.
From
Deepak Keesara.

Hi Deepak,
First thing you can check that job SAP_COLLECTOR_FOR_PERFMONITOR is runningby t-code sm37.
This job runs in client 000 under user ddic with periodic of one hour.
If not schedule it in t-code sm36
Login as user ddic to client 000 ,execute t-code sm36 give the job name SAP_COLLECTOR_FOR_PERFMONITOR, give abap program RSCOLL00 AND GIVE PIRIODIC VALUE ONE HOUR THEN SAVE AND RELEASE.
Regards
Ashok
Edited by: Ashok Dalai on Aug 18, 2008 1:20 PM

Performance - Where the problem is ?

Hi All,
I'm in urgent need to find out system performance.
I need to outline the various components of the response time with data and interpret the results to outline where the problem is?
How can i do this.. Please provide me some suggestions...
Expecting your valuable replies.
Thanks
Cheenu

Hello,
The bottle neck could be at the Os,DB or R/3 level.
The performance analysis can be started from st03/st03n.
Check the dialog response time here.Under this you can also see if the DB response time is high or the OS time.
Depending on htis you have navigate to st02 or st04.
ST02-->check for the buffer,swaps & shared memory.
ST04-->check for the DB cache, DB buffer quality.
Also you can use transactions sm50,sm66 incase your system is slow.It will show if the system is overloaded.
Hope this helps.
Regards,Prasanna

ABAP DUMP in ST03N : COMPUTE_BCD_OVERFLOW

HI Guys,
     When I go to ST03N, Expert Mode, Select the Daily workload, I double clicked on 15.03.2010, the system will hit the abap dump : COMPUTE_BCD_OVERFLOW. However, when I try for other dates, it is fine. Which meant it is only the 15.03.2010 causing the dump.
    following is the system's details:
     SAP R/3 Kernel :              640_REL
     Kernel Patch :                304
     SAP BASIS : SAPKB62041
    I have raised a OSS message to SAP, and the consultant had replied me with two sapnotes:
     881968
     840763.
    I've implemented the 881968 but there is some error after implement, the ST03N cannot be executed. ( ABAP DUMP syntax error). Hence, I revoked the sapnote 881968. For the 840763, I did not implement since it advised to upgrade the support package for SAP BASIS and I am not sure what is affected after I upgrade the support package.
    The system I mentioned above is not a BW system and I doubt this is why I get the SYNTAX ERROR dump after implement the sapnote.
    Did you guys encountered similar problem? Any solution for this?
    The following is ABAP DUMP: COMPUTE_BCD_OVERFLOW:
Runtime Errors         COMPUTE_BCD_OVERFLOW
Exception              CX_SY_ARITHMETIC_OVERFLOW
       Occurred on     29.03.2010 at 09:37:45
Overflow for arithmetical operation (type P) in program "SAPWL_ST03N"
What happened?
Error in ABAP application program.
The current ABAP program "SAPWL_ST03N" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
A value does not fit in a calculation field.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_ARITHMETIC_OVERFLOW',
was neither
caught nor passed along using a RAISING clause, in the procedure
"CALCULATE_PROFILE" "(METHOD)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
An overflow has been determined in the current arithmetical operation
containing operands of type P. Possible causes include:
1. The results field of type P is to small and the result does not fit
    into it.
    places.
2. The result or partial result has more than 31 decimal places.
Edited by: Wei Jian Kwan on Mar 30, 2010 3:57 AM

Hi Amber,
    The following sapnote is not implementable in my system:
     0001384846 ST03N: BCD_OVERFLOW in SAPWL_LCL_03N_HITLNRESPTI
     This is due to the current Support Pack : SAP BASIS in my system is : SAPKB62041 and the corrections in the sapnote are only available for 700 until 720.
Best Regards,
Ken

Host name different in profile and ST03N transaction

Hello everybody,
I have suffer from problem the the my host name is different that show in ST03N transaction and in profile
then how to solve this problem
Thanks

Check sap note no. 608322,1059576. might help in resolving.
Thanks!

Problems with language after upgrade?

Hi,
We did an upgrade from 4.6C to 6.0 and as part of the upgrade the spanish language was imported again. SMLT was runned after the upgrade so it finished the import of the language because the upgrade do not import the whole language because it takes too much time.
Now when I enter DB13, ST03N or some other transactions, i get a mix between Spanish, German and English only if I logged in spanish, if I login in English then everything works just fine.
I've been looking for SAP notes about this and don´t find anything, does anybody knows about a note in reference to this problem or know how to solve this?
In another upgrade from 4.5B to 6 the samethig happens but the client did not matter about this as they usually login in English to do administrative tasks.
Thanks,

Hi AC
without being the expert, which would solve your topic... This is probably the following:
Each object in the system is assigned to a main language and different translation languages (i.e. a field name is available in 32 different languages). The translation level depends on the type of documentation.
The system (depending on the language settings) first tries to show you the translation, which corresponds to your login-language. If this translation is not available, then it goes back to the object in a main language (like English). A screen might then include Spanish and English Field names, or even "Placeholders".
In newly installed SAP ECC 6.0 systems, the first thing I would think about is, that you intend to shown an object, which is not translated, or that your language is not properpy installed, or that the language presentation vector of your system is not properly maintained, or that you have Unicode topics.
For a solution start into the following direction
- on service.sap.com/globalization (language information and media library) find out more about the langauge concept, and the translation aspects for the different objects/ languages
- Consider the MDMP/ Unicode topic.
- In the system check the language settings and language import status
- regarding upgrade/ unicode start witht he recommenations in the upgrade master guide SAP ERP 6.0, or the information at service.sap.com/unicode@sap.
regards,
Andreas R

New report from transaction ST03N

Hi everybody,
In transaction ST03N you can have an overview about User or transaction for a period.
This helps to let you know what kind of work has been done in the system.
The data is shown separated, you have one place for transactions and one for user.
The only problem is that we do not have a combined list which shows, user + transaction at once.
Is there a way to do this, or has anybody any idea where the data from this transaction are stored, so I can get them from the database
Regards,
Dren Selimi

report zbc_r_tcodes_by_user.
data:begin     of   gv_output,
     user      type string,
     type      type c,
     title     type string,
     times     type i,
     end       of   gv_output,
     gt_output like standard table of gv_output, "Output table
     gv_title type char100.                      "Report title
perform get_data.
*&      Form get_data
*       text
form get_data.
data:lv_datum type d,
       lt_data   type standard table of swncaggusertcode,
       lv_data   type swncaggusertcode.
lv_datum = sy-datum.
gv_title = 'Objects executed by users from'.
write: sy-datum to gv_title+55.
do.
    lv_datum+6 = '01'.
    refresh lt_data.
    call function 'SWNC_COLLECTOR_GET_AGGREGATES'
      exporting
        component     = 'TOTAL'
        periodtype    = 'M'
        periodstrt    = lv_datum
      tables
        usertcode     = lt_data
      exceptions
        error_message = 1
        no_data_found = 1
        others        = 2.
    if sy-subrc ne 0.
      exit.
    endif.
    write lv_datum to gv_title+40(10).
    subtract 1 from lv_datum.
    loop at lt_data into lv_data where tasktype = '01'.
      gv_output-user = lv_data-account.
      gv_output-type = lv_data-entry_id+72.
      gv_output-title = lv_data-entry_id(40).
      gv_output-times = lv_data-count.
      collect gv_output into gt_output.
    endloop.
enddo.
sort gt_output.
gv_title+52(1) = '-'.
condense gv_title.
endform.                    "get_data

Performance problem PRD environment

Hi Everybody,
Some moments during the day we are having a performance problem in our PRD environment. The system get slow.
The CPU get 100% of his usage.
The most used process are:
oracle.exe - 35%
disp+work - 30%
disp+work - 11%
disp+work - 05%
disp+work - 05%
In SM50 we have the programs running.
In ST03N we can see the most sequential reads and DB time problems.
If we do a performance tunning of the programs identified we can reduce the performance problem?
Anybody know another solution or where can i get more information to see where exactly the problem is?More transactions
maybe?
Best Regards,
Fábio Karnik Tchobnian

Hi,
In SM50 we have the programs running.
At what staus they are like commit , read etc; you also need to check for active JOBs get the details.
In ST03N we can see the most sequential reads and DB time problems.
Check for poorest SQL statement from ST04 => SQL cache => remove * => check for total execution time (descending order) => check for latest 3-4 SQL statement with your'e developer to fine tune the programe
This is just for analysis if this is happening every time then above solution for upgrading CPU is worth than tuning
Regards;

BI statistics, Duplicate records in ST03N

Hi Friends,
We had applied BI statistics, and now we are checking the query performance in ST03n.
In the Reporting Analysis View, I can monitor the query access, the problem is that this view show de statistical data saved in 0TCT_C02 (infocube) and 0TCT_VC02 (virtual cube, the the entries that the view displar, are duplicated.
How can I solve this?
Thanks in advance!

Hi,
Please implement the OSS Note:
1401235: Avoid Duplicate records and handling of Virtual Cube call
-Vikram

Problem in st03n

Similar Messages

Maybe you are looking for