Problem in stack port WLC5670

Question

Since  i mentioned new to this tech,i deployed 2 WLC 5760 in network i connected one  of Stack wise 480 cable in ring type.but my port is down state
when i give show switch stack-port summary both controllers are down state.
What could be the issue can any one suggest me.
Apart from the above issue i configured few of configuration please vlaidate it
wlan Guest-WbAuth 3 Guest-WbAuth
client vlan 100
mobility anchor 192.168.5.1
no security wpa
no security wpa akm dot1x
no security wpa wpa2
no security wpa wpa2 ciphers aes
security web-auth
security web-auth authentication-list EXT_AUTH ---- need more information ?
security web-auth parameter-map webparalocal -need more information ?
no shutdown
2. Redudancy configuration
conf t
service internal
redundancy
main-cpu
standby console enable
end
session standby ios
please validate this 

Answer 1

Hi Bill,
why don't you use the "Out Port" and In Port" sub.vis?
I use these ones for Win9x; WinNT & W2k. The only thing you need to know - you need for NT + W2k additional patches (accesshw) - if needed, you can have it from me - write to: [email protected]
Find attached a example, how to use paraport in "parallel" way. This example does not work in bidirectional direction, but I have made more "high end"-ones for direct use of 8255 circuit - this gives direct access to 24 bit at paraport.
Hope this gives some new ideas.
Regards
wha
Attachments:
printer_port_test.vi ‏43 KB
lpt.vi ‏22 KB