Problem in start RAC

We have Oracle 11.2 on Redhat Linux 5.2. It is a 3 node RAC. I want to restart a instance. I did it as in single instance: as sysdba, shutdown immediate and then startup
SQL> startup
ORA-00119: invalid specification for system parameter REMOTE_LISTENER
ORA-00132: syntax error or unresolved network name 'cchORdb-rac:1521'Ther is a parameter
*.remote_listener='cchORdb-rac:1521'
I commited out the parameter and getORA-29760: instance_number parameter not specifiedI then triied to use srvctlsrvctl start database -d cchprd
PRCR-1079 : Failed to start resource ora.cchprd.db
ORA-00119: invalid specification for system parameter %s
CRS-2674: Start of 'ora.cchprd.db' on 'cchordb2' failed
CRS-2528: Unable to place an instance of 'ora.cchprd.db' as all possible servers are occupied by the resource already
ORA-00119: invalid specification for system parameter %s
CRS-2674: Start of 'ora.cchprd.db' on 'cchordb3' failedPlease help.

Hello,
As per the error i feel that values gives for "REMOTE_LISTENER" is wrong. check for the values.
usually it will be like below.
NAME TYPE VALUE
remote_listener string (ADDRESS = (PROTOCOL = TCP)(HO
ST = HOST_NAME)(PORT = 1521))
If there is any mistake edit your pfile as this and start your RAC database. it should start.
Regards

Similar Messages

  • Problem about start RAC when hosts start

    every time ,when i start hosts, crs will start RAC automatically,but some resource of RAC will be 'UNKNOWN' ,i need stop all resource and start again use srvctl
    is there any better method to solve the problem?

    other way
    A.
    a. $crs_stat
    b. $crs_stop <copmonent_name>
    c. $crs_start <copmonent_name>
    B
    a. $crs_stop -all
    b.$crs_start -all

  • Problem starting RAC database instance on Node 2

    Hi all,
    I have the following problem after installing RAC 10.2.0 with 2 nodes (clusternode1 & clusternode2).
    I'll greatly appreciate if someone could help fix this:
    oracle@clusternode2:~> srvctl status nodeapps -n clusternode1
    VIP is running on node: clusternode1
    GSD is running on node: clusternode1
    Listener is running on node: clusternode1
    ONS daemon is running on node: clusternode1
    oracle@clusternode2:~> srvctl status nodeapps -n clusternode2
    VIP is running on node: clusternode2
    GSD is running on node: clusternode2
    Listener is running on node: clusternode2
    ONS daemon is running on node: clusternode2
    oracle@clusternode2:~>
    oracle@clusternode2:~> srvctl status asm -n clusternode1
    ASM instance +ASM1 is running on node clusternode1.
    oracle@clusternode2:~> srvctl status asm -n clusternode2
    ASM instance +ASM2 is running on node clusternode2.
    oracle@clusternode2:~>
    oracle@clusternode2:~> srvctl status database -d orcl
    Instance orcl1 is running on node clusternode1
    Instance orcl2 is not running on node clusternode2 <-------Here is the problem!!!!!!!!!!!!!!!!
    oracle@clusternode2:~>
    So when I try to start the orcl2 instance I receive:
    oracle@clusternode2:~> srvctl start instance -d orcl -i orcl2
    PRKP-1001 : Error starting instance orcl2 on node clusternode2
    CRS-0215: Could not start resource 'ora.orcl.orcl2.inst'.
    oracle@clusternode2:~>
    I tried to do it per SQL*PLus:
    oracle@clusternode2:~> echo $ORACLE_SID
    orcl2
    oracle@clusternode2:~> sqlplus "/as sysdba"
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Mar 27 21:08:59 2006
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to an idle instance.
    SQL> startup
    ORA-01078: failure in processing system parameters
    ORA-01565: error in identifying file '+ORCLDATAGRP1/orcl/spfileorcl.ora'
    ORA-17503: ksfdopn:2 Failed to open file +ORCLDATAGRP1/orcl/spfileorcl.ora
    ORA-15077: could not locate ASM instance serving a required diskgroup
    SQL>
    But ASM is there and running !!!!!!!!!!!
    Thanks very much for any tip how to get ride of this problem.
    Kind regards.
    Askia.

    muba_zak wrote:
    Thanks John,
    How the cron jobs takes care, is there any different is there between Admin Managed & Policy Managed
    Thanks.
    Muba
    I don't know what your cron jobs do. If (for example) they logon to the database through a service published by the scan listeners, they will be happy. If they logon using a deterministic connect string, you have a problem - a problem caused by mis-using the system.

  • How to stop and start RAC Database

    Hi,
    Can anybody tell me How to stop and start RAC Database.
    Pls give me the exact procedure for OS - IBM Aix 5.3.
    Rajkumar

    Burleson,
    It so appears, as from the numerous times you have been published incorrect, untested information, and non-working scripts, you are not an Oracle guru,
    but only a self-proclaimed one.
    It also appears nothing on your 'CV' can be easily verified.
    You state you are an 'adjunct professor emeritus', however anyone who was kicked out after a few months can call himself a 'professor emeritus'.
    Looking at the enormous amount insults and slander you have posted directed to me and others on this forum, showing a highly unprofessional attitude toward your peers,violating this forums rules of conduct, don't you think you deserved to be banned completely?
    After all, you are always promoting your own publications here, which is also in violation of the rules for this forum.
    What makes you think that "Sybrand" is a man's name? How many male Sybrand's do you know? I don't know any, not one.
    That's your problem. I'm as much as male, as you are a fat, ugly, self-proclaimed Oracle-guru, which you are clearly not, you are only a fraud, and this glares from all of your publications.,
    Sybrand Bakker
    Senior Oracle DBA

  • Severe problem while starting Lenovo 3000 N200

    Dear friends & experts,
    I am using Lenovo 3000N200 0769BDG laptop. I have following problems while starting the system.
    Recently my system was hacked against which I installed an Anti-Malware software. It showed that the system was free from any Malware.(But believe me, it is true that the system was hacked.). But each time on starting the system, a  black and white window  is being displayed which contains the following message:
    We apologize for the inconvenience, but Windows didnot start successfully. A recent hardware or software change might have caused this.
    If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration  to revert to the most recent settings that worked.
    If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed , or if you aren't sure what caused the problem, choose Start Windows Normally.
    Safe  Mode
    Safe Mode with Networking
    Safe Mode with Command Prompt
    Last Known Good Configuration (your most recent settings that worked)
    Start Windows Normally
    Use the up and down arrow keys to move the highlight to your choice.
    Seconds until Windows starts:30.....1
    After 30 seconds, the Windows logo is displayed immediately followed by a Blue screen which lasts for 1 second and the system restarts.  I tried all the options listed above-- from Safe Mode to Start Windows Normally but the same problem recurrs. And the system doesn't shutdown until I press the power button.
    I have a licensed version of Windows Xp SP3 as OS. I tried to repair the system using WinXP CD but I found the following message:
    Setup did not find any hard disk drives installed in your computer.
    Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.
    Setup cannot continue. To quit Setup, press F3.
    A point to be noted is that earlier, I removed the Rescue & Recovery from my system  thinking that it might not be of much use and now, I lament for it.
    When I press F3 the same window appeared and the same problem recurred.
    I tried to access the files in my hard disk using Ubuntu CD and it was successful. I used Lenovo hardware quick test to check for any hardware faults, and my system passed all the tests.
    I request you to help me in solving this problem so that I can continue my studies peacefully.
    Thanking you,
    With regards,
    T.I. Kiran

    First off, being "hacked" and having viruses/malware are two different things. Someone hacking your computer doesn't really mean you have a virus/malware, it means an actual person gained access to your computer remotely and did something to it.
    More than likely you got a virus that corrupt your Windows System directory and/or registry. Anti-malware software won't necescarily detect all viruses, especially executable that run commands to simply delete files.
    The blue screen you're seeing is what us technicians call the BSOD (blue screen of death), it's an indication that there is a direct corruption with the core files that Windows requires to function properly.
    As an IT Technician, if this were one of my laptops or one of my end-users, I would simply reload it with a fresh copy of Windows XP. There's a possiblity that all data you had on the laptop is gone because if the Windows core files are corrupt/missing, then that could very well mean your system was wiped completely but the boot table is in tact, hence the fact that you even have the option to boot Windows XP.
    One other option I would suggest is try to reinstall Windows XP. Sometimes if you have the right copy of the install, it will let you reinstall the Windows XP core files, leaving your programs, files and directories in tact.
    Good luck.

  • I have problem with starting up my Mac Pro ?

    Dear ,
    I'have a problem with starting up my Mac Pro , please advice me how to start it

    This may help.
    http://support.apple.com/kb/TS1365
    Note: Steps 5 and 6
    Step 5
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Problem in starting SQL*PLUS in oracle database 10g

    Hi
    Well I am facing one problem while starting SQL*PLUS in oracle database 10g
    ERROR - "Procedure entry point longjmp could not be located in dynamic link library orauts.dll"
    This has happened when I installed Oracle Database 11g on same machine and when I deinstalled Oracle 11g then SQL*PLUS is started...no error came
    Can anybody tell me the reason please...

    hi
    pls im having the same problem but in my own case i installed oracle apex using 11g.
    im env variable is:
    C:\Oracle\product\10.1.0\Client_1\bin;C:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin\client;C:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin;C:\app\Xty\product\11.2.0\dbhome_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;;C:\Program Files\TortoiseSVN\bin;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\
    pls which is my apex_home so i can interchange it?
    i also have oracle 10g client installed

  • I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost?

    I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost? On visiting the store we get only one reply you may write to Apple directely. we have the similar kind of problem with iPad which is being used by my wife Mr.Neelam Vij and paid Rs.16000/- to get it replaced within a year & 6months use. so in totality we have paid Rs.28500/- + Rs. 3000/- diagnostic charges.
    1. iPhone 4 , 32 GB Black with Sr. No. 88******A4T
    2. iPad 2, 16GB White with Sr. No.DL*******KPH
    Moreover, we have no information to contact whom. even the replace set has a warranty of only three month which further confirm that Apple itself is not confident wheather product will last after replacement for more then three month. Such kind of happening do not encourage anyone to recomend this product to anyone. Would appriciate a faster response to our problem if someone from Apple is going to read this email.
    Thanks & Regards
    A K Vij
    <Personal Information Edited by Host>

    http://support.apple.com/kb/he57?viewlocale=de_de
    India
    (91) 1800 4250 744
    www.apple.com/in/support/
    hope it helps

  • I am facing problem in starting ShellHWDetection service Error code 1075,please help

    I am facing problem in starting ShellHWDetection service Error code 1075,please help

    Shellhwdetection is a Windows service which stands for Shell Hardware Detection Service.
    It provides notifications for AutoPlay hardware events.
    System error code 1075 means "The dependency service does not exist or has been marked for deletion."
    Please run services.msc, then find Shell Hardware Detection Service, view its dependencies
    Make sure the three services are set to running "automatic" in Services.
    If this doesn't help, then run sfc to check if there're some missing or corrupted files in system.
    Yolanda Zhu
    TechNet Community Support

  • Problem while starting Weblogic 7.0..please help

    Hi,
    Im facing this problem while starting the weblogic.
    Below is the error i get...
    <Nov 3, 2006 6:11:29 PM IST> <Alert> <WebLogicServer> <000297> <Inconsistent security configuration, java.lang.Exception: Certificate expired or not yet valid:
    fingerprint = a48264011b8f3aeb13f64147821dc941, not before = Sat Nov 02 01:32:23 IST 2002, not after = Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California
    L=San Francisco O=BEA WebLogic CN=weblogic.bea.com [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certi
    ficate Authority Constraints [email protected] , key = modulus length=65, exponent length=3>
    java.lang.Exception: Certificate expired or not yet valid: fingerprint = a48264011b8f3aeb13f64147821dc941, not before = Sat Nov 02 01:32:23 IST 2002, not after
    = Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California L=San Francisco O=BEA WebLogic CN=weblogic.bea.com [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certificate Authority Constraints [email protected] , key = modulus length=65, exponent length=3 at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:219)
    at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:122)
    at weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1556)
    at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:891)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:300)
    at weblogic.Server.main(Server.java:32)
    <Nov 3, 2006 6:11:29 PM IST> <Emergency> <Security> <090034> <Not listening for SSL, java.io.IOException: Inconsistent security configuration, Certificate expir
    ed or not yet valid: fingerprint = a48264011b8f3aeb13f64147821dc941, not before
    = Sat Nov 02 01:32:23 IST 2002, not after = Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California L=San Francisco O=BEA WebLogic CN=weblogic.bea.com Email=s
    [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certificate Authority Constraints [email protected] , key =
    modulus length=65, exponent length=3.>
    I have updated my license.bea file also. the date of expiration="2006-12-02" ..
    Please suggest as to how to proceed
    Thanks and Regards
    SmitaUdupa

    Your server certificate expired. You need to update your identity keystore with a new certificate.
    The expired certificate was issued by the demo BEA certificate authority (CA). These certs are not adequate for production but if you want to take this approach for your new cert you'll have to use the BEA CertGen utility. Have a look at http://edocs.bea.com/wls/docs70/secmanage/ssl.html for more details.
    Your other option is to use Java's keytool utility to create a private key. You'd then generate a certificate signing request (CSR) that you'd send to a CA such as Verisign. You might even have a CA in-house. The CA will then send you a signed certificate that you load in your keystore. Assuming you've configured WebLogic to use this keystore you should be back in business with SSL.
    Mike
    Weblogic/J2EE Security Blog: http://monduke.com

  • Problem in Starting a GP Process from Webdynpro Code

    Hi Experts
    I have a problem in starting a GP Process from webdynpro code. I have imported the following used DCs in my Webdynpro DC
    caf/eu/gp/api/wd
    caf/eu/gp/api (external)
    com.sap.security.api.sda
    Once I deploy I get the following error. No Syntax, Build errors in the application.
    java.lang.NoClassDefFoundError: com/sap/caf/eu/gp/process/rt/api/IGPRuntimeManager
    I have used the following code to start the GP Process - getUserDetails Context is of type IUser
              //Starting GP Process
    try {
    IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
    IGPProcessRoleInstanceList roles = rtm.createProcessRoleInstanceList();
    IGPUserContext userContext = GPContextFactory.getContextManager().createUserContext(
         wdContext.currentContextElement().getUserDetails());
    IGPProcess process = GPProcessFactory.getDesigntimeManager().getActiveTemplate(
                        "00A897714C5A11DE8E33005056A260C3", userContext);
    IGPStructure params = GPStructureFactory.getStructure(process.getInputParameters());
    IGPProcessInstance prInstance = rtm.startProcess(process,
                        "New User Registration Process",
                        "New User Registration Process",
                        wdContext.currentContextElement().getUserDetails(),
                        roles,
                        params,
                        wdContext.currentContextElement().getUserDetails());
    } catch (Exception e) {
         e.printStackTrace();
    Please do the needful EXPERTS.
    FYI... SP17
    Thank you
    Best Regards
    Ramamoorthy D

    Hi Ram,
    You have to add Library reference to your DC.
    in the context menu of your DC select
    properties->webdynproReferences->LibraryReference
    add sap.com/cafeugp~api as refernce.
    I hope this will solve your problem.
    Regards,
    Rajesh

  • TS1718 Is anyone else experiencing trouble playing video in itunes?  Video intermittenly pause and plays without audio?  Video used to play fine this problem only started since the last version of itunes, version 7.  Just updated to v. 11 still having sam

    Is anyone else experiencing trouble playing video in itunes?  Video intermittenly pauses and also plays with not audio.  Video used to play fine.  This problem only started since I upgraded to version 7.  I have not used itunes since then because I couldn't watch anything without experiencing these problems.  I was waiting for the next version to come out and hoped it would fix the problems I was having, but no such luck.  I just upgraded to the latest version, version 11 and I'm still having the same problems.  Anyone else having these same issues and if so, any solutions?

    Is anyone else experiencing trouble playing video in itunes?  Video intermittenly pauses and also plays with not audio.  Video used to play fine.  This problem only started since I upgraded to version 7.  I have not used itunes since then because I couldn't watch anything without experiencing these problems.  I was waiting for the next version to come out and hoped it would fix the problems I was having, but no such luck.  I just upgraded to the latest version, version 11 and I'm still having the same problems.  Anyone else having these same issues and if so, any solutions?

  • Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored

    Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored and updated firmware, deleted the account, anything I could think of, but it's just not accurately downloading the most recent emails.

    The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

  • Problem with starting itunes...

    ok this is my first time on this forum. So here is my problem i start up itunes and it will be fine for like a second and all of a sudden a screen pops up and says AppleMobileDeviceHelper has stopped working. And then it keeps popping up until i close itunes altogether. Ive tried uninstalling and reinstalling and it still persists.

    Queen-Bea, lets get a crash log to the Apple Engineers for a look.
    Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
    drwtsn32 -i
    And hit return.
    This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
    prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
    Generate the crash, collect the crash log, and and send it as an attachment to this email address.
    in the email to Roy, be sure to include the following information:
    - A link to the thread on Apple Discussions where the issue is being discussed
    - The username you are using in the thread
    - The version of iTunes you are using or trying to use
    - A concise description of the issue you are seeing
    - The exact text of the error message you are seeing (if you are seeing one)

  • Problem when start lightroom 6 on my windows 8.1 notebook

    I have a problem when start lightroom 6 on my windows 8.1 notebook, the system says "impossible find input point in _crtCreateSymbolicLinkW in C:\windows\system32\msvcp110.dll", and lightroom 6 terminate. I disinstalled and reinstalled many times but I have always the same error. What is the problem? Thank for the answers.

    Download update 4 for Intel x64 or Amd if your notebook have an Amd CPU of Visual studio 2012 and trya again. Before you can controll if the installer install library of visual studio 12 during installation and see if the library missing is on windows\system32.

Maybe you are looking for