Problem in starting services after rebooting the sap server.

Hi ,
I got a problem in starting SAP services files in SAP BI system on windows 2003 server. Whenever I reboot the system all sap services failed to start throw a message u201CCould not start SAPBDJ_00 service on local computer. Error 1069: The service did not start due to login failure".
This is the common message for every sap service SAP<SID>_00,SAPOSCOLL,SAPCMSr.01,SAPSMD_98. Until unless I maintain ./SAPservice<SID> password externally by going through service.msc and g to properties of particular service and g to logon option to maintain password manually to fix this.
./SAPService<SID> user is no locked and password maintained properly also I tried to change the service user to SIDADM user and restarted the server however getting the same problem.
Could not find any fixes in internet so please help me to fix this issue.
Regards,
Vinod

Hi Sunil,
we are in midde of BI implementation. last week we built the DEv box and Updated kernel and suport packs and restarted then i observerved this issue. I have already tried to change the SIDADm user but intially after changing the user service will start and once you restart the server then the issues appear again.
The password which i am using was the one set during the installation.
Please suggest.
Regards,
Vinod

Similar Messages

Will DB start automatically after rebooting the computer?

Will DB start automatically after rebooting the computer?

user9947478 wrote:
Will DB start automatically after rebooting the computer?Yes. IF you set it up to do so. Or you have an OSs for which it is installed to automatically do so and you have not disabled it.
I assume, since it seems to be difficult for you to tell us what operating system you use, that you use some form of Windows. In which case, the answer is 'Yes, automatically set up - as seen by the Services'.
(Windows users don't seem to realize there are other OSs and therefore don't tell. They also don't realize that Windows is not an OS, but rather the marketing label for a whole families of OS Editions. Some popular families are: Windows XP, WIndows 2003, Windows 2008, Windows 7. But even then, Oracle only works on specific Editions within the family.)

Oracle SSO not showing up status after rebooting the 10gapplication server

Hi all,
I installed 10g R2 10.1.2.0.2 application server RHEL AS 4.0 2.6.9-11 kernel.
After the successful installation IM and MR and MT (BI). All the components in the MT and infrastructure was showing up status. After rebooting the machine i executed the following commands
For Infrastructure
1.     To make the metadata repository up and running
Log in as an oracle user
#cd /home/oraASInfra/bin
#export ORACLE_HOME=/home/oraASInfra
#export ORACLE_SID=mamcinfr
#./lsnrctl start
#./sqlplus
Enter userame: sys as sysdba
Sql>startup
Sql>Exit
2.     To start the other components of the infrastructure
Log in as an oracle user
#cd /home/oraASInfra/opmn/bin
#./opmnctl startall
3.     To start the iasconsole
#cd /home/oraASInfra/bin
#./emctl start iasconsole
For Middle tier
1.     To start the middle tier components
Log in as an oracle user
#cd /home/oraASmt/opmn/bin
#./opmnctl startall
2.     To start the iasconsole
#./emctl start iasconsole
In the MT all the components is showing up status
In the Infrastructure except oracle sso OID , HTTP server and OC4J security is showing up status.
There is no any port conflicts between the infrastructure and MT.
Is there any post installation tasks has to be done after the installation?
please help me to sort out the issue.
thanks,
C Saju

1. After RapidWiz with 11.5.10.2 CDs, do we need to
do any post installation step to make the browser
load Oracle Forms. Do we need to create our own
certificate using envshell.cmd and then adjkey. And,
apply that to Jinitiator using adjbuild.sh and
regenerate JAR files using ADADMIN Jar ( I am so far
assuming that these steps are not necessary after for
rapidwiz install of 11.5.10.2 )Your assumption is right. You do not have to do anything
2. Do I need to apply the Oracle App 11i 11.5.10.2
Maintenance Pack after installing using RapidWiz from
the main set of CDs labeled as 11.5.10.2No
3. Should I try by installing manually latest
Jinitiator 1.3.1.21 or 1.3.1.25You do not have to upgrade your jinitiator version unless you want to go with the latest one.
Since (adsign.txt, appltop.cer, and identitydb.obj) do not exist in your system, you just need to initialize the java certificate as follows:
adjkey -initialize
This will create the following files:
- adsign.txt directory $APPL_TOP/admin
- appltop.cer direcotry $APPL_TOP/admin
- identitydb.obj directory $HOME of the user that launch adjkey
Metalink note: 365735.1 should be helpful.
Good luck

Listener service not start automatically after reboot in Win2K server Clust

Hi all,
I set up a two node Server Cluster with Microsoft Windows 2000 server cluster service. Hardware are two HP DL380 servers and HP MSA500 (the shared storage). The cluster's IP address is 10.1.241.65. When I shut down both servers and restart the primary server, the listener server service will not start automatically. The listener log is:
Started with pid=1108
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.241.65)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
The service is set up automatically start. I suspect the cluster virtual IP is not available immediately after reboot. So I tried setting the Recovery after first failure and second failure to 3 minitues each, and setting up Dependencies of the listener on the cluster service in the Win2K Service panel. Neither worked.
The service can be manually start.
Any suggestion?
Frank.

The command to start automatically the listener is :
lsnrctl start
check the parameters in : <ORACLE_HOME>/network/admin/listener.ora
check the IP address or host name
Joel Pérez

Changes required after adding the sap server in domain (Visual Admin )

Hi All,
Yesterday we added our SAP Server (ABAP+JAVA) in our organization domain, Pls let me know what entries do I need to make in Visual Administrator and Configtool????
Regards,
Prashant

Prashant,
Your request is not clear. What do you mean by added to the domain?
But if you have connected exisiting sap system on the network (ABAP+JAVA) then visual administrator should work as it is. Please check your network connections are ok.
Hope this helps.
Manoj

How to start CRS and other services after rebooting nodes.

Hi,
i have created two node cluster database.how to start CRS and other service after rebooting nodes?
Thanks,

use crsctl command start...
$ORA_CRS_HOME/bin/crsctl start crsOr check status about CLusterware...
$ORA_CRS_HOME/bin/crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthyIf not OK... check log at $ORA_CRS_HOME/log/hostname/*
and check status database , service and etc...
use crs_stat
$ORA_CRS_HOME/bin/crs_stat -t
$ORA_CRS_HOME/bin/crs_stat if you find some service or instance ... not online...
use srvctl command, help to start
Get Help...
$ORA_CRS_HOME/bin/srvctl -h

Oracle does not start automaticly after reboot

I've installed O 9i on win2ksrv after installing DB2.
Then I create a database and this db starts successfully.
After reboot the database is shutdown and can only starts manually by sysdba.

Hi,
Have you checked the space of ORAARCH or SAPARCH folder/directory ? The problem may be "Archive destination full". If its full then try to move some old Offline redo log file to other safe location as a backup and then try to restart the Oracle Instance again.
Regards
Bhavik G. Shroff

Start services connector connect to sap gateway failed

hi experts
when i want to start services connector saprouter
saprouter string :/H/172.16.2.11/S/3299
a error window say
"connect to sap gateway failed
error partner 'host:3299' not reached"
where is the possible problem here ?
regards
ying xie

Dear Damian
i try to start services connector so that SAP could connect to us to support.
i have a little obfuscation about your telnet test. which should be my destination server, SAP's server?
how to test whether port 3299 is on work or not?any ways to check those ports are used for what?
many thanks
ying xie

I fail to start the sap server with error:Operating system call recv failed

I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
R/3 Basis System: Operating system call           recv failed (error no. 10053)
Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.

trc file: "dev_disp", trc level: 1, release: "620"
Sun May 07 13:14:30 2000
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid   560 (PC with Windows NT)
relno      6200
patchlevel 0
patchno    674
intno      20020600
pid        3628
***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c   978]
     shared lib "dw_xml.dll" version 674 successfully loaded
     shared lib "dw_xtc.dll" version 674 successfully loaded
     shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 07 13:14:32 2000
WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
Sun May 07 13:14:37 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm)          12784     (752)
DpShMCreate: sizeof(tm_adm)          1690816     (8412)
DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpShMCreate: sizeof(comm_adm)     192000     (384)
DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY          (addr: 001E0040, size: 1977824)
DpShMCreate: allocated sys_adm at 001E0040
DpShMCreate: allocated wp_adm at 001E0560
DpShMCreate: allocated tm_adm_list at 001E3750
DpShMCreate: allocated tm_adm at 001E3778
DpShMCreate: allocated wp_ca_adm at 00380438
DpShMCreate: allocated appc_ca_adm at 00384A88
DpShMCreate: allocated comm_adm_list at 003861F8
DpShMCreate: allocated comm_adm at 00386210
DpShMCreate: allocated ca_info at 003B5010
DpShMCreate: allocated wall_adm at 003B5018
MBUF state OFF
Sun May 07 13:14:38 2000
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c   9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 07 13:15:18 2000
ERROR => W2 (pid 4776) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W2
Sun May 07 13:15:38 2000
ERROR => W5 (pid 4548) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W5
ERROR => W8 (pid 4592) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 4584) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W9
ERROR => W12 (pid 4676) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 4272) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W13
my types changed after wp death/restart 0xbf --> 0xb7
Sun May 07 13:15:58 2000
ERROR => W4 (pid 4888) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W4
ERROR => W6 (pid 4788) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W6
ERROR => W15 (pid 4596) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W15
Sun May 07 13:16:18 2000
ERROR => W1 (pid 4892) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W1
ERROR => W3 (pid 4904) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W3
ERROR => W7 (pid 4000) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W7
ERROR => W10 (pid 4864) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W10
my types changed after wp death/restart 0xb7 --> 0xb5
Sun May 07 13:16:38 2000
ERROR => W0 (pid 4900) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 4500) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W11
ERROR => W14 (pid 4636) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W14
ERROR => W16 (pid 3532) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W16
my types changed after wp death/restart 0xb5 --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 07 13:16:42 2000
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c   7883]

Issue while playing the content of Azure Media Services after deleting the channel.

Hi,
We are having the issue while playing the content of Azure Media Services after deleting the channel.
Please find detail scenarios below:
We have done live streaming of an event using Azure Media Services, event was around 5-6 hrs. After completion of event channel was deleted, when we checked content data
it was only 1hr. Content has only last 1 hr. recording, we are unable to get full recoding.
We divided event into two parts to avoid above issue. After completion of 1st part which was of 2 hrs., we stopped the streaming and deleted the channel. New channel was
created and streaming was started for 2<sup>nd</sup> part, after completion of event channel was deleted. Now we are unable to play the content data for 1st part but able to play the 2nd part of event through content publish URL.
We have done streaming of 3 hrs. event on 18th April with same process and full recoding was available.
Can you let me know what might be the issue?

Hi,
Please refer to Justin’s blog and see if it helps:
http://www.justinkobel.com/post/2012/04/30/SharePoint-2010-Claims%E2%80%93Operation-is-not-valid-due-to-the-current-state-of-the-object.aspx
As suggested by Alex, please provide more information about your process of changing password.
Here is an article for updating passwords on SharePoint 2010:
http://blogs.technet.com/b/seanearp/archive/2011/01/25/updating-passwords-on-sharepoint-2010.aspx
Regards,
Rebecca Tu
TechNet Community Support

ElementsAutoAnalyzer abends within a few minutes after rebooting the PC. How can I fix this?

I decided to start my PC from scratch (new hard drive, reinstall Windows 7 Ultimate 64-bit, then all software). ElementsAutoAnalyzer abends within a few minutes after rebooting the PC. How can I fix this?
Event viewer shows:
Faulting application name: ElementsAutoAnalyzer.exe, version: 12.0.0.0, time stamp: 0x530b7bfc
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
Exception code: 0xc0000005
Fault offset: 0x0000000000031ccc
Faulting process id: 0xbdc
Faulting application start time: 0x01d072bd95218cd4
Faulting application path: C:\Program Files (x86)\Adobe\Elements 12 Organizer\CAHeadless\ElementsAutoAnalyzer.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: ea495e82-deb1-11e4-9750-001c25e903e8

Erica from Apple support: Your efforts to help on this subject are appreciated. However, during my wait for your supervisor, just when I stepped away from my desk for a moment you must have picked up your phone again. When I heard a noise (other than the hold music) I rushed back to my desk only to hear you hang up. When the phone rang and the ANI said "Apple support" I tried to pick up but you were gone by the time I got the button pressed.
Hopefully you'll see this note and leave a message on how to resolve this issue for me and the others from other similar questions posed on this forum.
Thanks,
George

Problems with SD Card After Reboot

Hi, I formatted my SD Card through my Xperia Z3 with Lollipop.I erased all data from Spotify, included the folder spotify.music.Installed the Spotify again with the SD Card connected and all worked fine.I did download from all my albuns, and verified on File Commander, and all data were in SD Card. The problem-->>>After reboot the phone the SD Card isn´t recognized.I did all procedure again, and all return to work, but every time that I reboot the phone, I have to do do all these again. I tested format the SD Card and reboot my phone many times, and it´s all right.It´s necessary only a logon Spotify and the next reboot the SD Card don´t read more. Please, can you help? Thanks a lot!!!

Hi Spotify Family, My problem was resolved.I changed my SD. After was 128GB Ultra SandiskNow 32GB normal Sandisk -> http://www.bslive.com.br/acessorios-informatica/149-cart%C3%A3o-de-mem%C3%B3ria-32gb.html Remember that you have to erase all cache and uninstall the Spotify again before input the new SD Card. Good Luck for All

Acrobat Pro for Mac won't start, even after restarting the machine. Any suggestions?

Acrobat Pro for Mac won't start, even after restarting the machine. Any suggestions?

Hi Patrick,
Can you please mention the version of Adobe Acrobat that you are using and on what OS version. Also mention whether this problem has started recently and was running fine earlier or is it a fresh install and has never worked for you.
Have you tried uninstalling and reinstalling the product after you started facing this issue.
-Shashi

Error while starting oms after reboot

Hi All,
I am receiving the error while restarting OMS after rebooting the server. Any help would be appreciated.
Ping statistics for ::1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>ping xyz02srv141
Pinging xyz02srv141.abc.com [::1] with 32 bytes of data:
Reply from ::1: time<1ms
Reply from ::1: time<1ms
Reply from ::1: time<1ms
Reply from ::1: time<1ms
Ping statistics for ::1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>nslookup 10.12.2.141
Server: tatnet200.abc.com
Address: 10.10.2.200
Name:    xyz02srv141.abc.com
Address: 10.12.2.141
C:\Windows\system32>nslookup xyz02srv141.abc.com
Server: tatnet200.abc.com
Address: 10.10.2.200
Name:    xyz02srv141.abc.com
Address: 10.12.2.141
C:\Windows\system32>nslookup xyz02srv141
Server: tatnet200.abc.com
Address: 10.10.2.200
Name:    xyz02srv141.abc.com
Address: 10.12.2.141
C:\Windows\system32>echo %ORACLE_UNQNAME%
ORACC
C:\Windows\system32>emctl stop oms -all
EM Configuration issue. D:\app\s_oracle_xyz02srv141\product\11.2.0\dbhome_2/xyz02srv141.abc.com_ORACC not found.
C:\Windows\system32>
Regards,

C:\Windows\system32>emctl stop oms -all
EM Configuration issue. D:\app\s_oracle_xyz02srv141\product\11.2.0\dbhome_2/xyz02srv141.abc.com_ORACC not found.
Hi,
Please check the path of command emctl. The above emctl command is for Grid/Cloud Control. The output indicates that 'emctl' for database control was executed.
Regards,
- Loc

How to do that when you open a new tab to appear like the start page after opening the browser?

How to do that when you open a new tab to appear like the start page after opening the browser?

https://addons.mozilla.org/en-US/firefox/addon/newtaburl/
Never used it myself, so I'm not sure if you can set to about:home or not. You'll have to give it a try.

Problem in starting services after rebooting the sap server.

Similar Messages

Maybe you are looking for