Problem in starting the evaluation version of Xcelsius 2008

Hi,
I downloaded the Xcelsius 2008 free trial pack yesterday. I have admin rights to my PC so I was able to install the program. But when I tried to start the program (both in Start->Programs->Xcelsius->Xcelsius 2008 and in the respective folder on my C: drive) I get this message:
"C:\program files\businessobjects2008\xcelsius\xcelsius.exe
This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem".
I already tried de-installing and then re-installing but that did not work out.
I would really appreciate if someone could help me on this.
Thanks!
Tomi

Hi,
you can check the following:
- Is Microsoft Excel installed on you system?
- Is the version of Excel supported by Xcelsius?
Take care,
Thomas

Similar Messages

Were do I find the evaluation Keycode for xcelsius 2008?

I just signed up and downloaded the eval version of xcelsius 2008 and It requires a keycode for install but I cannot find one in the email that they sent to me.

Trial versions of Xcelsius 2008 have a trial keycode embedded in them. You will be prompted everytime you open the trial version, but you can continue to use Xcelsius until your trial period expires.

I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see spec

I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW025, DW050 ... WARNING: DW024, DW025 ..., please advice me the step to re-install the Pro-X. Thanks

Please follow Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Do let us know if it worked.
Regards
Rajshree

How do I install LabVIEW 6.0 over the evaluation version? I can't un-install the evaluation version.

I get the message that another version of LabVIEW 6.0 is already installed and it won't let me install 6.0. How do I get rid of the evaluation version?

I don't have LabVIEW in my Add/Remove Programs. I may have at one time, but
can't remember. The removal must have been incomplete becasue LabVIEW 6.0
says "Another version of this produce is already installed." The same thing
happens if I try to reinstall the evaluation version.
Ron
JeffD wrote in message
news:AJSO6.29900$[email protected]..
> Do you get an error when you try to un-install the eval version? I am able
> to successfully remove it, via Add/Remove Programs in Control Panel.
>
> Jeff
>
> "Raytheon Ron" wrote in message
> news:[email protected]..
> > How do I install LabVIEW 6.0 over the evaluation version? I can't
> > un-install the evaluation version.
> >
> > I get
the message that another version of LabVIEW 6.0 is already
> > installed and it won't let me install 6.0. How do I get rid of the
> > evaluation version?
>
>

PSE 8 problems to start the program

Hello!
Just download the PSE8 today and I can´t get it launched? The edit-program start but the organixer doesn´t. Either I can´t launched the share-programs or the program to make albums.
Someone out there who can help me?
SE-MJA

Hello!
I got the same result.
The program can´t launch the "read in workspace for Elements Oganizer". It´s try to launch but be freeze and then nothing happens.
It´s bad because I think the program was good. Now I think I will reclaime the produvt and get my money back.
Regards!
Micke
Date: Wed, 7 Apr 2010 04:22:09 -0600
From: [email protected]
To: [email protected]
Subject: PSE 8 problems to start the program
Have you located the program file to ensure it is properly installed?.
If not, click on the start button and type PhotoshopElementsEditor.exe (note caps and no spaces) into the search box.
The program, if available, should appear with a blue PSE icon in the search results.
Right click on it and select send to desktop.
Then try to open the editor from the desktop by clicking on the icon.
>

Problems with downlowding the latest version of iTunes

Resently there have ben problems with downloading the latest versions of iTunes.
And also the version 10.6.1.7 I had to reinstall up to four times, undtil the install
succeeded.
Normally the updates are running without any problems.
I have ben iTunes customer several years, and very satisfied with the program.
Best regards
Aagevi

Try downloading iTunes directly from the Apple website -> http://www.apple.com/itunes/download/

Hello, I am trying to download the evaluation version of Lightroom but i have an error message as my version os Error Le système d'exploitation que vous utilisez n'est plus pris en charge par Lightroom. My "plate forme" is not allowed. I have a Mac OS v

Hello, I am trying to download the evaluation version of Lightroom but i have an error message.My "plate forme" is not allowed. I have a Mac OS version 10.8.6 . Thanks for helping!

Hi Barbara Satre,
Kindly check System requirements | Lightroom
Thanks,
Atul Saini

I installed the new version of LIghtroom (2015) from Creative Cloud. Creative Cloud says I successfully installed the new version. However, the shortcut icon that was installed does not start the new version. I've also gone to the properties link itsel

I installed the new version of LIghtroom (2015) from Creative Cloud. Creative Cloud says I successfully installed the new version. However, the shortcut icon that was installed does not start the new version. I've also gone to the properties link itself but, no success in starting. How do I launch the new version?

Thank you, toinimj59. I did this part and the installation completed (apparently it didn't earlier--included an acceptance of the standard terms and conditions...
Solution 1: Sign out from Creative Cloud desktop app and sign back in
Sign out from, and back in to, the Creative Cloud desktop app. Click here for instructions
Launch Lightroom.

Problem to start the java stack . its not kernel. its java stack CAF

Hello SAP,
We have a problem to start the java stack. We saw in the SAP
Managementconsole that the instances are running,
The problem began after the deployment of the sap.com/CAF increaseing
from patch 6 to 12. After that we make the update from 12 to 12.1
The current kernel is number 95, the latest one.
This plattform is Netweaver 04S.
The B2C applications are stopped
We hope you help us as soon as possible , because we are getting late
with the project.
My email:
[email protected],
***send me and email and I can send you the files:
*error in java stack.doc (detail of the error)
*the directory work
*and the log file of the SDM is attached in the file information_log_SDM.txt
The log file of de E:\usr\sap\CRD\DVEBMGS01\SDM\program\log
is also attached in the file sdmcl20070716142953.log
thanks for your fast answer
Best Regards,
Luis Moreno

aply the note: 1010640 and later restart the system
Luis Moreno

Hello, I purchased a subscription to DC PS + LR 12.99 € per month but when I start the PS version of

Hello, I purchased a subscription to DC PS + LR 12.99 € per month but when I start the PS version of CC tells me the trial version expired, ask for help

Please sign out of the CC app, then sign back in.
Launch Ps and verify.
Regards,
Ashutosh

I can not start the trial version that i loaded

i can not start the trial version that i loaded . it apears imediatly "CS6.....need to close.sorry for ...."

It's doing the same to me!!! Why give us a 30 day free trial if we can't get it to work!!

I face so much problem to start the laptop , 8530P,Elite book ?

my laptop , 8530p , Elite book start up button not working properly. many time press to the start up button, then my laptop start, i face so much problem to start the laptop?

Hi @qayyumrabani
To get your issue more exposure I would suggest posting it in the commercial forums since the {insert product model} is a commercial product. You can do this at
Commercial/Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
The support page for your product may be helpful in the meantime: HP EliteBook 8530p Notebook PC
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

I face so much problem to start the laptop?

my laptop start up button not working properly. many time press to the start up button, then my laptop start, i face so much problem to start the laptop?

Hi,
Maybe the Power Button is loose..If that is the case then you can contact HP technical support to get the button replaced depending on whether your notebook is still under warranty or out of warranty.
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

How can I fix this "Adobe two-version" problem, so only the latest version stays enabled, the old version stays DISABLED, and/or uninstall the old version?

I went to my add-ons tab, and I DO, in fact, have two versions of shockwave flash, an 11.9...version, and a 13.9..., which, if I'm not mistaken, is the latest version. There is a "ask to activate, always activate, never activate" button for EVERY add-on. I clicked never activate on the older version, and closed the tab. I then tried to play a video off of the Web. It would not play, I tried another site with the same result, so I went back to my add-on tab, and the button for the older version had changed back to "always activate" by itself. It continues to repeat this, and WILL NOT stay on "never activate". Every few times I return to the add-ons page, THE NEW VERSION IS DISABLED, AS WELL AS THE OLD ONE. I've tried to uninstall the old version, but when I go through control panel, and bring up the folder contents, the old version isn't even there! I've done start, find, and typed in "Adobe", and the old version is NOT FOUND! Both versions keep changing back and forth on the activate button, and they both will disable on their own, no matter how many times I fix it! smh!!

@jscher2000: Didn't mean to lose contact. I still don't have my playback problem solved, if you can believe that. I've downloaded the uninstaller / installer links with someones help that's on this forum, used them in the exact same order. It did nothing to help. However, I was in the process of attempting your solution. I made sure all browsers were closed; in fact, I went offline before this procedure. When I used find, and typed in Shockwave, it came back..."no search results". I recalled a path I had previously used, and had to use it instead of find, C:/ Acer/ Windows/SysWOW64/ Macromed/ and here there were files for Shockwave AND Flash. I opened Shockwave, says " this folder is empty". Flash Player and Flash Util plugin, Util32 Active X, NPSWF32_13_0_0_214.dll...all files appear correct, BUT why aren't there ANY files in the Shockwave folder? NONE of the buttons you describe in your steps to let Firefox "clean up" the pluginreg.dat file show in my window...if I am in the right window. My username is at the top, and it's drop-down is "3 button"+sign out. One says settings, but it doesn't take me to any "help", Trobleshooting info, "show folder", nor any way to exit Firefox or to start it back up. Settings goes to "edit settings", and has a list of checkboxes...all with something to do with threads in one aspect or another, and one concerning private messages. Sounds to me like I don't know what I'm doing, am on entirely the wrong Mozilla /Firefox page, and I'm NEVER, EVER going to get this damn video playback crap fixed once and for all. Some sites will let a video play, but they are rare. Vikings.com is the one that has me red-faced. NOTHING plays there. Except ads, of course. You can't get those to STOP.

Urgent facing problem when starting the weblogic admin serverof soa11.1.1.3

install the soa 11.1.1.3 trying to start the admin server of weblogic getting the below exception plz help me its urgent.
####<Jun 9, 2010 10:31:55 AM IST> <Critical> <WebLogicServer> <PC-AMD40> <AdminServer> <main> <<WLS Kernel>> <> <> <1276059715500> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The dynamic loading of the OPSS java security policy provider class oracle.security.jps.internal.policystore.JavaPolicyProvider failed due to problem inside OPSS java security policy provider. Exception was thrown when loading or setting the JPSS policy provider. Enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-01538: The default policy provider was not found.
weblogic.security.SecurityInitializationException: The dynamic loading of the OPSS java security policy provider class oracle.security.jps.internal.policystore.JavaPolicyProvider failed due to problem inside OPSS java security policy provider. Exception was thrown when loading or setting the JPSS policy provider. Enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-01538: The default policy provider was not found.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1394)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.JpsRuntimeException: JPS-01538: The default policy provider was not found.
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:273)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.JpsException: JPS-01538: The default policy provider was not found.
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:705)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.JpsException: JPS-01514: The default context is missing in jps-config.xml.
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:665)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:650)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:650)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.service.credstore.CredStoreException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
     at oracle.security.jps.internal.credstore.ssp.CsfWalletManager.openWallet(CsfWalletManager.java:177)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.doInit(SspCredentialStore.java:218)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:140)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:127)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:115)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:53)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:133)
     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:128)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:656)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:650)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:650)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

using orapki you should be able to see the contents of the wallet without a password. try using this:
ORACLE_WM_HOME/oracle_common/bin/orapki wallet display -wallet ORACLE_WM_HOME/user_projects/domains/EPMSystem/config/fmwconfig
Should result in the following
Oracle PKI Tool : Version 11.1.1.2.0
Copyright (c) 2004, 2009, Oracle and/or its affiliates. All rights reserved.
Requested Certificates:
User Certificates:
Trusted Certificates:
Subject: OU=Class 1 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: OU=Secure Server Certification Authority,O=RSA Data Security\, Inc.,C=US
Subject: CN=Entrust.net Secure Server Certification Authority,OU=(c) 1999 Entrust.net Limited,OU=www.entrust.net/CPS incorp. by ref. (limits liab.),O=Entrust.net,C=US
Subject: CN=GTE CyberTrust Global Root,OU=GTE CyberTrust Solutions\, Inc.,O=GTE Corporation,C=US
Subject: OU=Class 3 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: CN=Entrust.net Secure Server Certification Authority,OU=(c) 2000 Entrust.net Limited,OU=www.entrust.net/SSL_CPS incorp. by ref. (limits liab.),O=Entrust.net
Subject: OU=Class 2 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: CN=Entrust.net Certification Authority (2048),OU=(c) 1999 Entrust.net Limited,OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.),O=Entrust.net
If it prompts you for a password then that's your issue...

Problem in starting the evaluation version of Xcelsius 2008

Similar Messages

Maybe you are looking for