Problem in starting up RMAN????

Hi All,
I tried this command to startup RMAN, but got the errors below.
C:\>rman target / nocatalog
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12560: TNS:protocol adapter error
Please help me it's urgent

Please try to start the database first.
Not able to connect as sysdba

Similar Messages

Severe problem while starting Lenovo 3000 N200

Dear friends & experts,
I am using Lenovo 3000N200 0769BDG laptop. I have following problems while starting the system.
Recently my system was hacked against which I installed an Anti-Malware software. It showed that the system was free from any Malware.(But believe me, it is true that the system was hacked.). But each time on starting the system, a black and white window is being displayed which contains the following message:
We apologize for the inconvenience, but Windows didnot start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed , or if you aren't sure what caused the problem, choose Start Windows Normally.
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration (your most recent settings that worked)
Start Windows Normally
Use the up and down arrow keys to move the highlight to your choice.
Seconds until Windows starts:30.....1
After 30 seconds, the Windows logo is displayed immediately followed by a Blue screen which lasts for 1 second and the system restarts. I tried all the options listed above-- from Safe Mode to Start Windows Normally but the same problem recurrs. And the system doesn't shutdown until I press the power button.
I have a licensed version of Windows Xp SP3 as OS. I tried to repair the system using WinXP CD but I found the following message:
Setup did not find any hard disk drives installed in your computer.
Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.
Setup cannot continue. To quit Setup, press F3.
A point to be noted is that earlier, I removed the Rescue & Recovery from my system thinking that it might not be of much use and now, I lament for it.
When I press F3 the same window appeared and the same problem recurred.
I tried to access the files in my hard disk using Ubuntu CD and it was successful. I used Lenovo hardware quick test to check for any hardware faults, and my system passed all the tests.
I request you to help me in solving this problem so that I can continue my studies peacefully.
Thanking you,
With regards,
T.I. Kiran

First off, being "hacked" and having viruses/malware are two different things. Someone hacking your computer doesn't really mean you have a virus/malware, it means an actual person gained access to your computer remotely and did something to it.
More than likely you got a virus that corrupt your Windows System directory and/or registry. Anti-malware software won't necescarily detect all viruses, especially executable that run commands to simply delete files.
The blue screen you're seeing is what us technicians call the BSOD (blue screen of death), it's an indication that there is a direct corruption with the core files that Windows requires to function properly.
As an IT Technician, if this were one of my laptops or one of my end-users, I would simply reload it with a fresh copy of Windows XP. There's a possiblity that all data you had on the laptop is gone because if the Windows core files are corrupt/missing, then that could very well mean your system was wiped completely but the boot table is in tact, hence the fact that you even have the option to boot Windows XP.
One other option I would suggest is try to reinstall Windows XP. Sometimes if you have the right copy of the install, it will let you reinstall the Windows XP core files, leaving your programs, files and directories in tact.
Good luck.

I have problem with starting up my Mac Pro ?

Dear ,
I'have a problem with starting up my Mac Pro , please advice me how to start it

This may help.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Problem in starting SQL*PLUS in oracle database 10g

Hi
Well I am facing one problem while starting SQL*PLUS in oracle database 10g
ERROR - "Procedure entry point longjmp could not be located in dynamic link library orauts.dll"
This has happened when I installed Oracle Database 11g on same machine and when I deinstalled Oracle 11g then SQL*PLUS is started...no error came
Can anybody tell me the reason please...

hi
pls im having the same problem but in my own case i installed oracle apex using 11g.
im env variable is:
C:\Oracle\product\10.1.0\Client_1\bin;C:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin\client;C:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin;C:\app\Xty\product\11.2.0\dbhome_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;;C:\Program Files\TortoiseSVN\bin;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\
pls which is my apex_home so i can interchange it?
i also have oracle 10g client installed

I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost?

I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost? On visiting the store we get only one reply you may write to Apple directely. we have the similar kind of problem with iPad which is being used by my wife Mr.Neelam Vij and paid Rs.16000/- to get it replaced within a year & 6months use. so in totality we have paid Rs.28500/- + Rs. 3000/- diagnostic charges.
1. iPhone 4 , 32 GB Black with Sr. No. 88******A4T
2. iPad 2, 16GB White with Sr. No.DL*******KPH
Moreover, we have no information to contact whom. even the replace set has a warranty of only three month which further confirm that Apple itself is not confident wheather product will last after replacement for more then three month. Such kind of happening do not encourage anyone to recomend this product to anyone. Would appriciate a faster response to our problem if someone from Apple is going to read this email.
Thanks & Regards
A K Vij
<Personal Information Edited by Host>

http://support.apple.com/kb/he57?viewlocale=de_de
India
(91) 1800 4250 744
www.apple.com/in/support/
hope it helps

I am facing problem in starting ShellHWDetection service Error code 1075,please help

I am facing problem in starting ShellHWDetection service Error code 1075,please help

Shellhwdetection is a Windows service which stands for Shell Hardware Detection Service.
It provides notifications for AutoPlay hardware events.
System error code 1075 means "The dependency service does not exist or has been marked for deletion."
Please run services.msc, then find Shell Hardware Detection Service, view its dependencies
Make sure the three services are set to running "automatic" in Services.
If this doesn't help, then run sfc to check if there're some missing or corrupted files in system.
Yolanda Zhu
TechNet Community Support

Problem while starting Weblogic 7.0..please help

Hi,
Im facing this problem while starting the weblogic.
Below is the error i get...
<Nov 3, 2006 6:11:29 PM IST> <Alert> <WebLogicServer> <000297> <Inconsistent security configuration, java.lang.Exception: Certificate expired or not yet valid:
fingerprint = a48264011b8f3aeb13f64147821dc941, not before = Sat Nov 02 01:32:23 IST 2002, not after = Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California
L=San Francisco O=BEA WebLogic CN=weblogic.bea.com [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certi
ficate Authority Constraints [email protected] , key = modulus length=65, exponent length=3>
java.lang.Exception: Certificate expired or not yet valid: fingerprint = a48264011b8f3aeb13f64147821dc941, not before = Sat Nov 02 01:32:23 IST 2002, not after
= Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California L=San Francisco O=BEA WebLogic CN=weblogic.bea.com [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certificate Authority Constraints [email protected] , key = modulus length=65, exponent length=3 at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:219)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:122)
at weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1556)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:891)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:300)
at weblogic.Server.main(Server.java:32)
<Nov 3, 2006 6:11:29 PM IST> <Emergency> <Security> <090034> <Not listening for SSL, java.io.IOException: Inconsistent security configuration, Certificate expir
ed or not yet valid: fingerprint = a48264011b8f3aeb13f64147821dc941, not before
= Sat Nov 02 01:32:23 IST 2002, not after = Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California L=San Francisco O=BEA WebLogic CN=weblogic.bea.com Email=s
[email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certificate Authority Constraints [email protected] , key =
modulus length=65, exponent length=3.>
I have updated my license.bea file also. the date of expiration="2006-12-02" ..
Please suggest as to how to proceed
Thanks and Regards
SmitaUdupa

Your server certificate expired. You need to update your identity keystore with a new certificate.
The expired certificate was issued by the demo BEA certificate authority (CA). These certs are not adequate for production but if you want to take this approach for your new cert you'll have to use the BEA CertGen utility. Have a look at http://edocs.bea.com/wls/docs70/secmanage/ssl.html for more details.
Your other option is to use Java's keytool utility to create a private key. You'd then generate a certificate signing request (CSR) that you'd send to a CA such as Verisign. You might even have a CA in-house. The CA will then send you a signed certificate that you load in your keystore. Assuming you've configured WebLogic to use this keystore you should be back in business with SSL.
Mike
Weblogic/J2EE Security Blog: http://monduke.com

How to start with RMAN as I am beginner?

Dear all,
How to start with RMAN as I am beginner? Any simple document or guide line for me.
Thanks,
Amy

How to start with RMAN as I am beginner? Any simple
document or guide line for me.go to yours oracle home directory /orahome/bin there is RMAN exe tool run it it will show you prompt RMAN
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN> connect target sys/sys
connected to target database: ORCL (DBID=1171886541)
RMAN> backup database
2> ;
Starting backup at 21-JAN-08
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\SYSTEM01.DBF
input datafile fno=00003 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\SYSAUX01.DBF
input datafile fno=00005 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\EXAMPLE01.DBF
input datafile fno=00002 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\UNDOTBS01.DBF
input datafile fno=00004 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\USERS01.DBF
channel ORA_DISK_1: starting piece 1 at 21-JAN-08
channel ORA_DISK_1: finished piece 1 at 21-JAN-08
piece handle=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2008_01_21\O1_MF_NNNDF_TAG20080121T135924_3S8QQF74_.BKP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:01:15
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current controlfile in backupset
including current SPFILE in backupset
channel ORA_DISK_1: starting piece 1 at 21-JAN-08
channel ORA_DISK_1: finished piece 1 at 21-JAN-08
piece handle=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2008_01_21\O1_MF_NCSNF_TAG20080121T135924_3S8QSSN4_.BKP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:03
Finished backup at 21-JAN-08
http://www.orafaq.com/faq/rmanKhurram

Problem in Starting a GP Process from Webdynpro Code

Hi Experts
I have a problem in starting a GP Process from webdynpro code. I have imported the following used DCs in my Webdynpro DC
caf/eu/gp/api/wd
caf/eu/gp/api (external)
com.sap.security.api.sda
Once I deploy I get the following error. No Syntax, Build errors in the application.
java.lang.NoClassDefFoundError: com/sap/caf/eu/gp/process/rt/api/IGPRuntimeManager
I have used the following code to start the GP Process - getUserDetails Context is of type IUser
          //Starting GP Process
try {
IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
IGPProcessRoleInstanceList roles = rtm.createProcessRoleInstanceList();
IGPUserContext userContext = GPContextFactory.getContextManager().createUserContext(
     wdContext.currentContextElement().getUserDetails());
IGPProcess process = GPProcessFactory.getDesigntimeManager().getActiveTemplate(
                    "00A897714C5A11DE8E33005056A260C3", userContext);
IGPStructure params = GPStructureFactory.getStructure(process.getInputParameters());
IGPProcessInstance prInstance = rtm.startProcess(process,
                    "New User Registration Process",
                    "New User Registration Process",
                    wdContext.currentContextElement().getUserDetails(),
                    roles,
                    params,
                    wdContext.currentContextElement().getUserDetails());
} catch (Exception e) {
     e.printStackTrace();
Please do the needful EXPERTS.
FYI... SP17
Thank you
Best Regards
Ramamoorthy D

Hi Ram,
You have to add Library reference to your DC.
in the context menu of your DC select
properties->webdynproReferences->LibraryReference
add sap.com/cafeugp~api as refernce.
I hope this will solve your problem.
Regards,
Rajesh

TS1718 Is anyone else experiencing trouble playing video in itunes? Video intermittenly pause and plays without audio? Video used to play fine this problem only started since the last version of itunes, version 7. Just updated to v. 11 still having sam

Is anyone else experiencing trouble playing video in itunes? Video intermittenly pauses and also plays with not audio. Video used to play fine. This problem only started since I upgraded to version 7. I have not used itunes since then because I couldn't watch anything without experiencing these problems. I was waiting for the next version to come out and hoped it would fix the problems I was having, but no such luck. I just upgraded to the latest version, version 11 and I'm still having the same problems. Anyone else having these same issues and if so, any solutions?

Is anyone else experiencing trouble playing video in itunes? Video intermittenly pauses and also plays with not audio. Video used to play fine. This problem only started since I upgraded to version 7. I have not used itunes since then because I couldn't watch anything without experiencing these problems. I was waiting for the next version to come out and hoped it would fix the problems I was having, but no such luck. I just upgraded to the latest version, version 11 and I'm still having the same problems. Anyone else having these same issues and if so, any solutions?

Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored

Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored and updated firmware, deleted the account, anything I could think of, but it's just not accurately downloading the most recent emails.

The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

Problem with starting itunes...

ok this is my first time on this forum. So here is my problem i start up itunes and it will be fine for like a second and all of a sudden a screen pops up and says AppleMobileDeviceHelper has stopped working. And then it keeps popping up until i close itunes altogether. Ive tried uninstalling and reinstalling and it still persists.

Queen-Bea, lets get a crash log to the Apple Engineers for a look.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing (if you are seeing one)

Problem when start lightroom 6 on my windows 8.1 notebook

I have a problem when start lightroom 6 on my windows 8.1 notebook, the system says "impossible find input point in _crtCreateSymbolicLinkW in C:\windows\system32\msvcp110.dll", and lightroom 6 terminate. I disinstalled and reinstalled many times but I have always the same error. What is the problem? Thank for the answers.

Download update 4 for Intel x64 or Amd if your notebook have an Amd CPU of Visual studio 2012 and trya again. Before you can controll if the installer install library of visual studio 12 during installation and see if the library missing is on windows\system32.

Problem in starting services after rebooting the sap server.

Hi ,
I got a problem in starting SAP services files in SAP BI system on windows 2003 server. Whenever I reboot the system all sap services failed to start throw a message u201CCould not start SAPBDJ_00 service on local computer. Error 1069: The service did not start due to login failure".
This is the common message for every sap service SAP<SID>_00,SAPOSCOLL,SAPCMSr.01,SAPSMD_98. Until unless I maintain ./SAPservice<SID> password externally by going through service.msc and g to properties of particular service and g to logon option to maintain password manually to fix this.
./SAPService<SID> user is no locked and password maintained properly also I tried to change the service user to SIDADM user and restarted the server however getting the same problem.
Could not find any fixes in internet so please help me to fix this issue.
Regards,
Vinod

Hi Sunil,
we are in midde of BI implementation. last week we built the DEv box and Updated kernel and suport packs and restarted then i observerved this issue. I have already tried to change the SIDADm user but intially after changing the user service will start and once you restart the server then the issues appear again.
The password which i am using was the one set during the installation.
Please suggest.
Regards,
Vinod

Attached pdf wont open - problem just started

This week, pdfs attached to e-mail give error message "Download Error, download cannot be saved because an unknown error occurred - try again". On the Download window, the message is "Failed, Mailbox Resource". Yet I can Save the file to desktop and open it.
This problem just started to happen.
Help would be appreciated ... thanks in advace
Perry B

I just started having this same issue a day or two ago. I tried the fix described above and it did not help.
When I click on the attached file in the outgoing mail, nothing happens; when I send the file to myself and click on the attachment at the bottom of the received message I get the following error message: "The download cannot be save because an unknown error occurred. Please try again." But if I manually click on the "Save" button at the right of the attachment bar (or line, or whatever you call it), it does save just fine and will open just fine.
I am running Win7 with all service packs. As I indicated, this problem just popped up very recently, during an interval when I had left the computer on in "sleep" mode but otherwise did not use it. HOWEVER, before trying it after waking up my machine today, I did download and install the latest security updates from micronumb. Could these latest updates be the problem?
Thanks for any assistance anyone can give me.
sas

Problem in starting up RMAN????

Similar Messages

Maybe you are looking for