Problem in STMS

Dear All,
Recently we have upgraded our Development and Quality System from ECC6 to EHP5.
After upgradation I have delete QAS STMS configuration from DEV system and add again as I have shift QAS server to another server (Host name changed)
QAS is added sucessfully. I have "check"  all three Connection Test, Transport Directory and Transport Tool. All checks are Ok.
But there three component mismatch between DEV and QAS. I have installed all mismatched component in QAS. Now DEV and QAS have same component.
All transport requests automatically copied from DEV to QAS. But when I press "Adjust Impoert Queue (Ctrl+F6)"  System shows following error :
I have attached screenshot also.
Source file could not be opened
Message no. PS001
Diagnosis
An error occurred when opening the source file for reading.
  File name: R908177.DEV
  Directory: $TR_DATA
  Error code: 18
Definition of the error codes:
03   RFC system failure
04   RFC communication failure
11   invalid EPS subdirectory
12   sapgparam failed
13   build directory failed
14   no authorization
15   build path failed
16   open failed
17   read directory failed
18   read attributes failed
System Response
Transmission was terminated.
Procedure
Eliminate the cause of the error and restart the transmission.
Thanks and Regards,
Nirav

Dear Kishore,
Thanks for your reply.
I have checked patch level of individual components and compare. Both the systems at same patch level. When configure STMS at that time there was a diff. in following component due to that screen shot shows diff. in compnent flag. But after that I have installed all mismatched component. But that flag is not reset.
CPRXRPM    400   22
CTS_PLUG   200   5
EA-HR_MSS  1     4
I have run all three checks from both the systems. It is OK.
Transport Requests are copied from DEV to QAS 
But when I press buttton "Adjust Impoert Queue (Ctrl+F6)",  system throws error.
Even when I refresh queue, every time it start with "QAS: Sending import Que QAS(block 1 from 33)" status. It will take newar about 15 minutes.
Thanks and Regards,
Nirav

Similar Messages

  • Work Bencg request Import problem in STMS

    Dear Team,
      I would like to import the transport from Dev to PRD in STMS.
    While importing i am getting the following error log.
      Generation of programs and screens                                      
    Transport request   : SD1K900195                                        
      System              : SP1                                               
      tp path             : tp                                                
    Version and release: 372.04.10 700                                                                               
    Generation of programs and screens for transport request SD1K900195     
    Only generates programs with LOAD versions
    Start on 20.05.08 at 11:37:19                                                                               
    Ended on 20.05.08 at 11:37:20                                           No. of programs  /Min/Avg/Max (sec): 3  0 0 1                         No. of screens    /Min/Avg/Max (sec): 2   0 0 0                                                                               
    Generation of programs and screens                                      
      End date and time : 20080520113720                          
      Ended with return code: => 8 <==                                   
    Regadrs
    Senthil

    Hi,
    do you have expand icons to get more information (plus symbol)?
    I suppose you didn't watch the protocol at file system level.
    regards
    Walter Habich

  • Problem with STMS configuration ( READ_PROFILE_FAILED )

    Hi All,
    When i am configuring STMS in solution manager getting below error.
    message :READ_PROFILE_FAILED
    Command  TMS_PM_READ_PROFILE
    Service  tp Profile Service
    Start    Online
    Function TMS_PS_READ_PROFILE_FROM_DISK
    Message  READ_PROFILE_FAILED
    Function TMS_PS_WRITE_PROFILE_TO_DISK
    Message  SET_CODEPAGE_FAILED
    error: Transport control program tp ended with error 0212
    Please help me.
    Thanks,
    Balu...

    Hi Balu,
    Key here is
    DB Connect -- Link to database failed
    Offline Call -- could not access file as supposed
    which is tp is unable to connect to your database.. indirectly R3trans may not be working fine.
    While you are configuring TMS tp will conenct to database to update database tables which it is unable to do.
    Please provide trace of R3trans -d
    1. Logon at OS level with <sid>adm
    2. Execute R3trans -d and paste the contenct of trans.log in the same directory where you executed R3trans -d
    3. If you are able to solve DB connection error your self you can else please give OS and DB version and also Environment variables for the user sidadm.
    Thanks,
    Kiran.

  • Problem with STMS

    Hello SAP,
    When we configure the STMS System (PRO is the domain), the connection with DES system fail (the CALTP_Linux RFC no run properly)
    See the image please,
    When execute ping to host the ping respond properly,
    64 bytes from
    HOST): icmp_seq=1 ttl=64 time=0.015 ms
      64 bytes from
    (IP): icmp_seq=2 ttl=64 time=0.023 ms
    64 bytes from
    HOST): icmp_seq=3 ttl=64 time=0.021 ms
    64 bytes from
    HOST: icmp_seq=4 ttl=64 time=0.019 ms
    64 bytes from
    HOSTicmp_seq=5 ttl=64 time=0.025 ms
    64 bytes from
    HOSTicmp_seq=6 ttl=64 time=0.026 ms
    64 bytes from
    HOSTicmp_seq=7 ttl=64 time=0.023 ms
    Can you help me please?
    Thanks.

    Hi Victor,
    Could you please share dev_w7 log file from the OS level,as it's completely related with the hostname entry under hosts file.Have you followed all the above recommendations completely.
    Try to share the ping result for particular system,if failing then try to look under /etc/hosts files for proper entries as already suggested to you by @Regan Benjamin .
    Also you mentioned
    No, our IP address is solved by DNS
    Our IP address is solved by DNS
    Have you provided a static IP to that machine or by a DHCP server.,if obtaining IP from DHCP server than here could be the issue for failing of RFC connection.Kindly confirm.
    Regards,
    Gaurav Rana

  • Problem ib stms system

    Hello
    we have BW system on win2k with SQL 8 .
    We had a disaster in our SQL system and we reinstall the SQL system.
    Everything is working O.K but when we Cannot transport change request.
    when i go to Check transport tool i got the error Message
    DB Connect Link to database failed
    DB connect Link to database failed
    Offline Call connect failed .
    i compare the SQL authorization to my production system and everithing
    look O.k .
    any idea ?
    Best Regards

    Hello,
    This is standard you must apply note 551915
    exactly script user_restore.sql
    You can also add a environment variables like
    "MSSQL_DBNAME"="<SID>"
    "MSSQL_SCHEMA"="<sid>"
    that variables also are in [HKEY_LOCAL_MACHINE\SOFTWARE\SAP\<SID>\Environment]
    Best Regards,
    Tomasz Wawrzonek

  • STMS connection problems to TRANSDIRHOST directory

    Hello gurus,
    Operation System: OS400 (V7R1)
    SAP systems: SAP ERP 6.0 EHP5
    We have been faced with this error some time ago! This is very strange error, I have been trying to found some information about it but until now I have not been successful.
    Some weeks ago, after the installation of sap systems, I did the STMS configuration between the sap systems and we noticed after some hours that the connection between them had been lost, when I do a test to connection through STMS! I don´t know what is the solution for this issue, I thought that was caused by a AS/400 parameter value which could limited the time of connections in shared folders between two servers.
    What is more strange in this case, it´s the "solution" that it have been adopted in the last weeks which fixes the problem temporarily... considering the example of our SAP QAS system (server 192.168.1.143, which is our SAP Quality system) we noticed that whenever we perform a click on top of TRANSDIRHOST through the System i Navigator application (/QFileSvr.400/ which is in our case the SAPDEV server (192.168.1.142) -- /QFileSvr.400/SAPDEV)
    the problem in STMS connection is temporarily resolved after I press the REFRESH button (F5) in this sap transaction!
    Can you help us to solve this problem?!... because it makes no sense that we have to do this manual connection to shared folder everyday... certainly this have some solution that enables and maintains the connection established at QFileSvr.400 in all sap systems (all landscape)!
    Any suggestion? Any tips?
    Thank you in advance,
    samid

    Hello Deepak Kori,
    First at all thank you very mutch for your answer.
    1) Yes, it has all that information/entries:
    Internet                          Host              
    Opt  Address                           Name                                                                               
    ::1                               IPV6-LOOPBACK     
                                            IPV6-LOCALHOST    
          127.0.0.1                         LOOPBACK          
                                            LOCALHOST         
          192.170.1.120                     product            
                                            product.lusit.pt
          192.170.1.121                     develop            
                                            develop.lusit.pt
          192.170.1.122                     quality            
                                            quality.lusit.pt
    2) Sorry, but I didn´t understand what you´re asking here! Can you clarify me with more details?
    Best regards,
    samid

  • STMS: Transport control program tp ended with error code 0232

    Dear ERP Gurus,
    I just encountered problem with STMS in my PRD system. The import is just stuck up on "tp connecting to database". It won't continue unitl the system gives me this error message:
    Transport control program tp ended with error code 0232
    Errors: connect failed
    The tp System log says:
    ERROR: Connect to PRD failed (20090227135454, probably wrong environment)
    I have verified that the suggestion in SAP Note 165708 has already been implemented in our DEV, QAS, and PRD instances.
    Any idea why I am having this problem? Imports were running fine yesterday. Please help.
    Your prompt response is highly appreciated.
    Thanks a lot.
    Best Regards,
    Albert

    Hi Albert,
    First check import monitor and delete all requests from queue, which are still getting imported.
    And go to /usr/sap/trans/tmp and mv all those tmp files to other location.
    Then kill all OS jobs which are getting execute with tp.
    Check all jobs are runnig fine, related to transportation. If not reschedule the same.
    Then start importing.
    Before doing this just check whether your stms related RFCs are working fine.
    I think One of your RFC is getting struck. just try to change ip or hostname accordingly and try.
    Regards
    Nick Loy

  • Stms configuration

    HI all,
                   I am trying to import the data from dev server but i got the error message " Transport control program tp ended with error code 0212"  Errors: could not access file as supposed (see SLOG for more info) i think its becase of the configuration problem in stms plz help me to configure the stms correctly plz tell me the procedure.

    hi
    i am  also faceing same problem  .
    i have check and obsrverd that all the   transport request that are released from dev --->qas  which is having   sidadm (owner)permission (rw-rw ) this can be imported in system
    which i am trying to import the request  is having root (owner) and permission (rw--r)
    which i can not  import into the system
    i have to chage the permission to rw--rw manyally
    how to change the owner ship of the transport request .
    regard
    prasad

  • Problem with TMS setup in HA systems

    Dear colleagues,
    Our team have installed a new production environmnent to ECC in HA. We have a ASCS in cluster and two dialog instance in each server(local instance).
    A virtual host GPPR3CIB and two instances in local, node GPPR301 and node GPPR302. This is an ECC 6.0 on Windows 2003 Server and SQL server 2005.
    The architecture is as follows:
    - GPPR301 node:
       - Virtual ASCS ASCS_0 (message server)
       - ABAP Primary Instance PPR301_1 (disp+work)
       - ERS (Enqueue replication server) instace ERS_10
    - GPPR302 node:
       -ABAP Additional Instance PPR302_2 (disp+work)
       -Virtual Database Instance GPPR3DB
       -ERS (Enqueue replication server) Instance ERS_10
    Once the installation is complete you need to apply SAP Note No. 943334 - "TMS setup in high availability systems" to set up high availability STMS. The problem is to distribute the configuration after running
    the report " 'TMS_MGR_LOADBALANCING" described in SAP note.
    The message indicates problems trying to run the command tp.exe. It has followed the note No. 1010990 and we have checked the folder permissions of the kernel but the problem persists.
    Any information or help regarding this type of setup would be welcome.
    Thanks.

    Hi,
    We have solved the problem with STMS. After several tests, the problem was in the parameter SAPLOCALHOSTFULL. This parameter must be assigned the hostname of the local system for each profile instance. If you've assigned the virtual host in the cluster generates the error in the distribution of the STMS.
    Regards.

  • STMS Configure Error

    Dear Experts,
    I have some problem in STMS, During the configuration of STMS.
    I have getting syntax error in STMS ad below :-
    Category               ABAP Programming Error
    Runtime Errors         SYNTAX_ERROR
    ABAP Program           CL_CTS_FILE_SERVICE===========CP
    Application Component  BC-CTS-ORG
    Date and Time          07.07.2014 10:19:56
    |Short text                                                                                        |
    |    Syntax error in program "CL_CTS_FILE_SERVICE===========CP ".                                  |
    |What happened?                                                                                    |
    |    Error in the ABAP Application Program                                                         |
    |                                                                                                  |
    |    The current ABAP program "SAPLTMSU" had to be terminated because it has                       |
    |    come across a statement that unfortunately cannot be executed.                                |
    |                                                                                                  |
    |    The following syntax error occurred in program                                                |
    |     "CL_CTS_FILE_SERVICE===========CP " in include                                               |
    |     "CL_CTS_FILE_SERVICE===========CM011 " in                                                    |
    |    line 73:                                                                                      |
    |    "The data object "FILE" does not have a component called "PURPOSE"."                          |
    |    " "                                                                                           |
    |    " "                                                                                           |
    |    " "                                                                                           |
    |                                                                                                  |
    |    The include has been created and last changed by:                                             |
    |    Created by: "SAP "                                                                            |
    |    Last changed by: "SAP "                                                                       |
    |    Error in the ABAP Application Program                                                         |
    |                                                                                                  |
    |    The current ABAP program "SAPLTMSU" had to be terminated because it has                       |
    |    come across a statement that unfortunately cannot be executed.                                |
    |Error analysis                                                                                    |
    |    The following syntax error was found in the program                                           |
    |     CL_CTS_FILE_SERVICE===========CP :                                                           |
    |    "The data object "FILE" does not have a component called "PURPOSE"."                          |
    |    " "                                                                                           |
    |    " "                                                                                           |
    |    " "                                                                                           |
    |Trigger Location of Runtime Error                                                                 |
    |    Program                                 SAPLTMSU                                              |
    |    Include                                 LTMSUU75                                              |
    |    Row                                     1                                                     |
    |    Module type                             (FUNCTION)                                            |
    |    Module Name                             TMS_UI_GET_TMSADM_CREDENTIALS                         |
    |Source Code Extract                                                                               |
    |Line |SourceCde                                                                                   |
    |>>>>>|function tms_ui_get_tmsadm_credentials.                                                     |
    |    2|*"----------------------------------------------------------------------                    |
    |    3|*"*"Lokale Schnittstelle:                                                                   |
    |    4|*"  IMPORTING                                                                               |
    |    5|*"     VALUE(IV_FOREIGN_DOMAIN) TYPE  TMSDOMNAM OPTIONAL                                    |
    |    6|*"     VALUE(IV_REQUIRE_PWDCOPY) TYPE  FLAG OPTIONAL                                        |
    |    7|*"     VALUE(IV_SUPPORT_OWNPWD) TYPE  FLAG DEFAULT 'X'                                      |
    |    8|*"     VALUE(IV_SUPPORT_KEEPPWD) TYPE  FLAG OPTIONAL                                        |
    |    9|*"  EXPORTING                                                                               |
    |   10|*"     REFERENCE(EV_PASSWORD) TYPE  RFCAUTH                                                 |
    |   11|*"     REFERENCE(EV_STANDARD_USED) TYPE  FLAG                                               |
    |   12|*"  EXCEPTIONS                                                                              |
    |   13|*"      CANCELLED_BY_USER                                                                   |
    |   14|*"----------------------------------------------------------------------                    |
    |   15|                                                                                            |
    |   16|* fill global structure                                                                     |
    |   17|  clear gs_dyn173.                                                                          |
    |   18|  gs_dyn173-user = 'TMSADM'.                                                                |
    |   19|  gs_dyn173-domain = iv_foreign_domain.  " p.k. Domainlink accept                           |
    |   20|  gs_dyn173-pwdefine = iv_require_pwdcopy.                                                  |
    |Active Calls/Events                                                                               |
    |No.   Ty.          Program                             Include                             Line   |
    |      Name                                                                                        |
    |    5 FUNCTION     SAPLTMSU                            LTMSUU75                                1  |
    |      TMS_UI_GET_TMSADM_CREDENTIALS                                                               |
    |    4 MODULE (PAI) SAPLTMSU                            LTMSUI01                              333  |
    |      USER_COMMAND_0130                                                                           |
    |    3 FUNCTION     SAPLTMSU                            LTMSUU07                              104  |
    |      TMS_UI_CONFIGURE_CONTROLLER                                                                 |
    |    2 FUNCTION     SAPLTMSU                            LTMSUU04                              121  |
    |      TMS_UI_CONFIGURE_SYSTEM                                                                     |
    |    1 MODULE (PBO) SAPLTMSU                            LTMSUO01                               68  |
    |      STATUS_0100                                                                                 |
    Many thanks
    Subhash N Bhalekar

    Dear Deepak Kori,
    Thanks for quickly reply .
    Please Check some details as below
    1) SAP version and patch level
    SAP ERP 6.0 EHP 6 and pacth level 300
    2) Database version and patch level
    DB Sybase 15.7 and Sybase ASE 15.7.0.1260
    3) Any upgrade or patch update activity performed recently after which issue started ?
    Yes , I had start up-grading SP but yet syntax error not solved , i have post that issue in SCN and also SAP OSS .  you can also check my thread SAPLPA_PACKAG

  • Regd:  Import Error - STMS

    Dear All,
    i have done Client Export using SCC8 in Production .
    when i am trying to add in the test Client using  STMS - Add other Request  throwing Error:
    " The Cross-Client import is not yet in the Transport Buffer"
    is there any problem with STMS Configuration. i am able to send the Request from Dev to QAS to PRD.
    2)  in Test Server i have  created a new client 500. using SAP*  can i directly import the Request using STMS or First i have to do Client Copy using SCCL  and then i have to import the Request and then Execute SCC7.
    Regards
    SNB

    Shankar,
    " The Cross-Client import is not yet in the Transport Buffer"
    is there any problem with STMS Configuration. i am able to send the Request from Dev to QAS to PRD.
    I understand you have created the Client export in PRD and want to apply in QAS..If STMS is creating problems...apply the transport at OS Level using tp addtobuffer <TransportNo> <SID of QAS> Client=<client no>
    and then tp import <TransportNo> <SID of QAS> Client=<client no>
    then run SCC7 from SAP...This is how I do if I face problems in STMS...
    2) in Test Server i have created a new client 500. using SAP* can i directly import the Request using STMS or First i have to do Client Copy using SCCL and then i have to import the Request and then Execute SCC7.
    Which Profile did you select during the Export SAP_ALL? If yes...no need to run any local client copy ...simply import the request and exec SCC7.
    If you have selected any other profile except SAP_ALL, then it depends on your requirement.
    In short a local client copy is not required if you are doing a client export-import in case you want to use the same profile in both the cases.
    Award points if useful.
    Cheers!
    Bidwan

  • STMS import queue

    HI all,
                 Think some body deleted TR request (or something happend in the import queue) from the import queue, from that day onwards there was no transports are going on from development to quality systems. is there any chance to rebuild import queues, it was a problem in STMS imports.
    pls help me.
    cheers,

    Did you refresh the list with refresh button?
    If yes, check release log of that particular transport.
    Hope it helps.
    Regards

  • About the STM tool~

    Dear Sir:
    I sent a question to SAP as follow~:
    I download the SAP Tools for MS SQL Server STM but can't start.
    I restore the MS SQL 2005 DB from R/3 4.7 x110 32 bit windows source
    system to R/3 4.7 x110 64 bit target system.
    And I followed the 683447 note and 551915 note and 151603 note tried to
    migrate DB from source DB to target DB.
    but I can't start the STM it just stop and tell me to contact to the
    support team.
    Please tell me what's wrong.
    my OS is Windows 2003 64 bit NT R2 64bit.
    MSSQL 2005
    R/3 4.7 x110
    and SAP reply~:
    Dear customer,
    Please set up the WTS connection according to the attached SAP note
    "605795". And to open the service connection, please refer to the
    documents available at the following URL.
    http://service.sap.com/access-support -> 'Connect to SAP'
    -> 'Documentation'.
    Best regards,
    Nay
    SAP Network Support
    Actually I don't know how to set up  WTS connection & what's the essential for doing it.
    I only wanna solve my problem about STM tool and finish DB migration.
    Can anyone give me a suggestion?
    Or any knows how to solve my problem?
    Regards
    Jack lee

    Dear Sir:
    I followed the note 605795 and added a new MIS in System Data,but I can't set up the windows terminal server.
    Here is my saprouttab,is anything wrong with that?
    What should I do next?
    P/S/D source dest dest-serv passwd
    SNC connection to SAP
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
    SNC-connection from SAP to local R/3-System for Support
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.1 *
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.2 *
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.3 *
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.6 *
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.12 *
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.13 *
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"  192.168.0.13  3389
    SNC-connection from SAP to local R/3-System for pcAnywhere
    #KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" sapwas 5631
    SNC-connection from SAP to local R/3-System for SAPtelnet
    #KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" sapwas 23
    SNC-connection from SAP to local R/3-System for Netmeeting
    #KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" sapwas 1503
    Access from your local Network to SAPNet - R/3 Frontend
    #P 192.6.* 194.39.131.34 *
    P * * *
    All other connections will be denied
    #D * * *

  • Problem with exhange setup. Especially regarding kalender

    Can't sync. my kalender with my exhange account.

    Hi,
    We have solved the problem with STMS. After several tests, the problem was in the parameter SAPLOCALHOSTFULL. This parameter must be assigned the hostname of the local system for each profile instance. If you've assigned the virtual host in the cluster generates the error in the distribution of the STMS.
    Regards.

  • Tcp open connection problem while parallel tcp communicat​ion

    I have a problem with TCP Open connection while running another TCP transfer.
    While I run the Simple Data Client/Server example (..NI\LabVIEW 2010\examples\comm\TCP.llb) I would like to open another TCP connection according this simple VI attached. This runs on another port than the running Client/Server example. When the address of the PC to be connected to, is known to the network (IP/Name) all is fine, when the address is a name unknown to the network, than a significant delay in the datatransfer of the client/server example occures. Hope that anybody can reproduce/explain this behaviour.
    Network setup here is Gigabit ethernet/ DHCP / Windows XP Prof. SP3/ LV 2010 / LV 8.6.1
    Jörn
    Attachments:
    TCP_Open_blockingproblem.vi ‏16 KB

    I really appreciate your comments,
    to make sure that we do see the same effects let me exactly explain what I see: I open the example vi's : Data Client/Server example (..NI\LabVIEW 2010\examples\comm\TCP.llb. You can open it localy that means on one PC or open one  on another PC. To make it simple for the first try open it localy and run both vi's according the example instructions. On the Data Client.vi I see now the samples updating many times per second (should be every 25 ms, because the server produces these in this intervall). All is like expected. Now open the TCP_Open_blockingproblem.vi from above and let it run unmodified (except you have an PC named 'DataServer0'). What I see now in the Data Client.vi : The samples update came nearly to an halt (this is why I called it 'blocking'). Updates only every 6 seconds (here in my network setup). Now stop the TCP_Open_blockingproblem.vi. The DataClient.vi is running on the same speed as before. Now modify the 'DataServer0' to a pc name existing in your network and start again. This time the sample speed is not degraded. Can you confirm this behaviour ?.
    I did recognise the effect for the first time while I desigend an appliaction  based on the STM library and posted the effects I saw, here : http://forums.ni.com/t5/Components/Simple-TCP-Mess​aging-STM/td-p/583438/page/5. Like Christian Loew supposed there is a bunch of code around. It is a multi tier application receiving TCP traffic on some ports and distributing on others. So I decided to isolate the problem from STM and my own code and came to the simplest code which I thought it was possible where the problem still occures which I described above.
    Your suggestion to lookup the names once in the beginning of the application is a possible way, but I must say with the experience now I am still very uncertain of more unexpected future side effects during lookup, especially on network setups at customersites where I have no direct access. So I decided to give an UDP registration mechanism a try, like it is realised in the STM Examples of HostReceiver.vi and Target Sender.vi.
    Thanks for following so far,
    Jörn

Maybe you are looking for

  • Font Book won't remove font files

    I've been doing some testing with Font Book in hopes to replace Suitcase for font management. I've been testing on OS X 10.4.5 with Font Book 2.0.2. I have FB prefs setup with User as the default install location. Getting fonts installed works fine.

  • Why does PS CS5 (12.0.4) write to original file when I 'save as copy'?

    Here's the scoop: I open a PS file. I chose 'Save As' but uncheck 'Show Layers' in the dialog box. So now it's essentially a 'Save A Copy'. When the new file is saved the original file is written to (although nothing changed) and now has the same mod

  • Help with "Help File"

    Hi all, I have an almost-complete application to which I'm adding a help file. I am using the a VI called "Online Help file" or some thing to that effect (I would check but this internet station isn't my work station so I don't have access here...).

  • Weblogic - Fusion Middleware Cluster - Clarification - 11g

    Hello All, I've checked the forum and would need just a little clarification regarding weblogic cluster & fusion Middleware + Load Balancing. My current Setup is: ============== 1 APP Server: Runs Fusion Middleware 11g Forms and Reports + Weblogic +

  • Oracle Express is missing JAVA JVM

    IF I query with SELECT COUNT(*) FROM all_objects WHERE object_type LIKE 'JAVA%'; I get a count of 0. I see no DBMS_JAVA package. How can I install JAVA JVM, JServer and XDK in the Oracle Express database? I see no initjvm.sql, initxml.sql and xmlja.s