Problem in SubmittoSAP button
Hi All,
I have created an Interactive form in WD Java. I have added a SubmittoSAP button from WebDynpro ActiveX library in the form. Following is the code written in the click event of the button.
xfa.host.messageBox("Before Execution ");
// DO NOT MODIFY THE CODE BEYOND THIS POINT - 705.20051114114126.253659.250577 - SubmitToSAP.xfo
app.eval("event.target.SAPSubmit();");
// END OF DO NOT MODIFY
xfa.host.messageBox("After Execution ");
I have created an Action submit and assigned it to OnSubmit event. And select the display type of the form as ActiveX.
I am running my application on IE 7.0. When I run my application, I am getting first message box, displaying message "Before Execution". But I am not getting second message box and the call to my method is also not made.
Please help me on this.
Thanks and Regards,
Amit
Solved
Similar Messages
-
Problems with home button on iPhone 4
problems with home button on iphone 4
If its due to sensitivity issues, these self help guides might help.
http://www.youtube.com/watch?v=zNwr_mxgs9Q
http://www.youtube.com/watch?v=lSqPC1V0PPg&feature=related
By the way, alcohol based hand sanitisers work too.
Don't overapply it in one go though. You'll have to allow the alcohol to evaporate.
One final tip, after its dried, I'd recommend you to leave your iPhone's home button facing a laptop's vent just to bake it a little drier. -
Problem with status-button in item view of ME21/22/23N
Hello ABAP,
i have to check for some conditions when a PO is saved, and due to those checks either save it or well, not.
This is working fine so far.
when you click check, or save, conditions get checked and window with errors pops up.
I´m using the normal error message procession used in SAPLMEGUI which i have to fill with thos three makros.
I just have one problem, my status button in item line doesnt get updated. i tried with a lot of metafields by now but it seems trial and error is not the way to go here.
any tips?requirement resolved.
solution follows:
DATA: lt_ytab TYPE TABLE OF ysdch_vbap_idnlf,
lt_data TYPE TABLE OF ymmch_check_idnlf_out, "added ID (TYPE INT4) Field to structure
lt_out TYPE TABLE OF char80.
DATA: ls_ytab TYPE ysdch_vbap_idnlf,
ls_mska TYPE mska,
ls_data TYPE ymmch_check_idnlf_out,
ls_out TYPE char80,
lv_row_end TYPE i VALUE 10.
CONSTANTS: lc_col_start TYPE i VALUE 10,
lc_col_end TYPE i VALUE 40,
lc_row_start TYPE i VALUE 10,
lc_title TYPE char80 VALUE
'Fehler, noch Bestand zu Liquidations/Annulationsaufträgen vorhanden'.
*~~~Get header data
ls_head = im_header->get_data( ).
*~~~Get item data
lt_items = im_header->get_items( ).
LOOP AT lt_items INTO lr_item.
ls_item = lr_item-item->get_data( ). "EKPO
"select liquidations/annulations orders for supplier material nr.
SELECT *
FROM ysdch_vbap_idnlf
INTO TABLE lt_ytab
WHERE /fis/idnlf = ls_item-idnlf.
LOOP AT lt_ytab INTO ls_ytab.
"now lets see which of those orders has order stock
SELECT SINGLE kalab kaspe
FROM mska
INTO CORRESPONDING FIELDS OF ls_mska
WHERE vbeln = ls_ytab-vbeln
AND posnr = ls_ytab-posnr.
IF ls_mska-kalab GT 0 OR ls_mska-kaspe GT 0.
ls_data-vbeln = ls_ytab-vbeln.
ls_data-posnr = ls_ytab-posnr.
ls_data-/fis/idnlf = ls_item-idnlf.
ls_data-kalab = ls_mska-kalab.
ls_data-kaspe = ls_mska-kaspe.
ls_data-meins = ls_item-meins.
ls_data-ebelp = ls_item-ebelp.
ls_data-id = ls_item-id. "saved ID for later processing
APPEND ls_data TO lt_data.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
ENDLOOP. " lt_item
IF NOT lt_data IS INITIAL.
"we got annulation/liquidation orders with order stock for this material
"so popup a error message
LOOP AT lt_data INTO ls_data.
IF NOT ls_data-vbeln IS INITIAL AND NOT ls_data-posnr IS INITIAL.
mmpur_business_obj_id ls_data-id. "using other makro now and making use of ID
"using mmpur_business_obj_id instead of mmpur_business_obj_it
ENDIF.
mmpur_metafield mmmfd_item_number.
mmpur_message 'W' 'YMMCH' '110' ls_data-vbeln ls_data-posnr ls_data-ebelp ' '.
ENDLOOP.
ch_failed = 'X'.
ENDIF.
Edited by: Florian Kemmer on Sep 7, 2010 3:22 PM -
Problems with parameter button in Crystal Report Server 2008
Dear all,
I have problems with parameter button in Crystal Report Server 2008.
when I created some parameters and groups in Crystal Report 2008, they showed both parameters in 'Parameter button' and group in 'Group button' on the left, so I can choose or type without clicking 'Refresh button' But when I added it to Crystal Report Server 2008 and I click parameter button , it doesn't show any parameter. Only click refresh button to choose them. On the other hand, for 'Group Tree' is ok. When go to Default Setting-> Parameter, all parameters are in 'Unused parameter' First time I think I had problems with my installation, but when I reinstalled it again, it was like before.
Could any one help me with this?
I appreciate looking forward to your reply
KetyaTry posting your questionin the correct forum, this is for SAP Business One, not Crystal reports Server
-
Problem with Information button in WAD
Dear Mates,
I have a problem with Information button in WAD template.
I have two queries in web template. those two queries are in two tabs( i used Tabstrip ) respectively.
if i press first tab it shows query1 and if i press second tab it shows query2 absolutely.
problem
when i am in first tab, if i click information it will show information about query1, but when i am in second tab,
if i click information it will show information about query1 only..
i need it to show information about second tab.
Please help. Its urgent. Full Reward points will be given.
Thanks in advance.
Regards,
Ranganathcheck out this link
http://www.mhprofessional.com/downloads/products/0071640266/0071640266_chap01.pdf -
A really annoying problem with a button/movie clip
I am having a problem with a button! its driving me insane
because i managed to do it last week, but that was by chance and
now i can't remember how i did it!
I can get the button (i'm using gelright from the common
libraries panel) and convert it to a movie clip(by pressing F8) and
even attach a behaviour but when i play the movie it doen't work!
when i move the curser over the button it changes into a hand, but
will not act like a button, even though i have set the behaviour to
'on release, go to and play keyframe 2'.
Please help me, for the sake of my laptop goin through the
wall!virgosam20 wrote:
> first, i found the button i wanted in the common
libraries (gelright) and
> added it to the stage. I resized it and converted it
into a symbol as a movie
> clip. Then it got added to my library.
> Then i deleted it from the stage and replaced it with
the movie cip version i
> had just converted it to. so now i have the same object
on the stage, but now
> its a movie clip and not a button.
ok - you are running yourself around in circles - why did you
delete it to the stage only to add it
again? once you converted it to a movie clip, you had what
you wanted on the stage - but then you
deleted it and dragged another instance of the same symbol
back onto the stage - there's no reason
to do that.
> Then i double clicked on it to bring up the movie clip
timeline, but instead
> of saying 'top, down, over, hit' (or whatever it says),
it jsut said 'layer 1'
> (but this was not my original stage as i have a number
of layers on that one).
Right - this is expected because yoyu are now inside the
movie clip timeline - not the button timeline.
> When i double clicked on it again, it brought up the
right headings (top, down,
> over, etc),
Right - because by double clicking the button symbol you were
then brought to "edit mode" for the
button symbol.
but there were about 5 layers that showed the different
layers for
> the original button.
Huh? What "5 layers"? What do you mean "original" button -
per your description there has only ever
been 1 button you have been working with.
> I think i have to add the button to each of the
headings, bt there is no room,
Lost you completely now - what do you mean add the button to
each heading? I have no clue what you mean.
> as when i did it before, there was only one layer for it
and i had to insert
> the key frames myself.
Still losing you here.
> I then added a behaviour to it using the Behaviours
pannel, (selected
> movieclip, then 'go to and play....') and it appears in
the behaviours pannel.
> But when i got to Play Movie, although the curser
changes into a hand, the
> button does not work.
That's because you are applying a behavior for a button to a
movie clip instead.
I think you went wrong when you converted the button to a
movie clip - i have no idea why you did
that or why to think your button needs to be in a movie clip.
>
> Hope that can help you with what i've done and you can
tell me where i've gone
> wrong.
>
I just think you don't understand how timelines, symbols or
buttons work yet in flash.
1. drag a button to the stage.
2. select it and open the Behaviors panel (dont double click
it to edit it).
3. add your actions.
4. test movie.
(no need for a movie clip here.
-chris -
Hi my name is Lior Sassi from Israel. I bought an iPhone 5 in Amsterdam. Now I have a problem with the button on the iPhone and I still have a guarantee. Where can I fix the problem?
The Warranty is only valid in the Original Country of Purchase.
For Troubleshooting your button issue... See Buttons and Switches here...
http://support.apple.com/kb/TS2802 -
I have problem with sleep button on my hp pavilion dv6-1354us When i press FN + F5 nothing happend. I reinstalled drivers for hp quick lunch buttons but the same problem.. Any solutions ? Thanks.
The operations of FN functions mainly based on the intrinsic working between the drivers and System BIOS.
If you already upgraded the Quick Lanuch Driver, then you may want to upgrade your System BIOS to the latest one in HP website to see if it can resolve the problem for you.
However, you need to be careful while upgrading your System BIOS. -
Hey everyone I am haveing problems with Flash Button
Hello everyone I am new here so I am haveing problems with
Flash Button because of the html address it wont go to the address
that i put into it it keep going to
http://www.faithdesigner.net/www.faithdesigner.net/pricing.html/www.faithdesigner.net
why does it do that? this is a link problem issue with flash
button in macromedia dreamweaver 8?
someone please help me?
Jeremy>
http://www.faithdesigner.net/www.faithdesigner.net/pricing.html/www.faithdesig
> ne
> r.net
In the dialog box for the Flash Button, in the link box, put
the full
absolute path if an external page. Including the
http:// part.
http://www.example.com/page.html
for pages inside your site- use the browse to file icon, and
use a relative
path.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
I habe purchased blackberry 9320 just a month back (13th May 2013). I am facing a problem wit unlock button. It seems it is by default in depressed state. Currently it is working but can go down any time. I have visited service center and they asked me to deposit the phone for at least 8 days to get it repaired. This is completely unacceptable for a month old phone!!!
Hi and Welcome to the Community!
As a user-to-user community, no one here can answer your question with any level of authority whatsoever. BlackBerry provides zero front line support to end users, including warranty...all support starts with the carriers, authorized resellers, and authorized service centers, all who can escalate cases into BlackBerry at no charge to the end user.
So, your escalation path is not here, in these forums. Rather, it is through your service center...even if you do not agree with what they have told you. You have no free path by which to bypass them. Your warranty service terms should be governed by your original purchase contract -- if that indeed said that you must leave it with them for 8 days, then that is what you agreed to when you made your purchase (regardless if you feel it acceptable or not now, you nevertheless previously contractually agreed to it).
There is something called incident support, but it costs to just ask the initial question, since you are bypassing the contract you signed upon purchase. If you wish to investigate that, you can review it here:
http://us.blackberry.com/support/programs/technical/incident.html
There also might be some good reading here:
http://us.blackberry.com/legal/handheld-limited-warranty.html
But, all in all, from your description, I might not hold out much hope...after all, what you describe does sound like a hardware issue. And just being one month old is not really relevant -- defect can certainly exist, and actually is normally discovered earlier than later. So, from what you describe, it sounds like a manufacturing defect, which should be covered by your warranty (but you may, contractually, have to wait those 8 days if indeed that's what the contract you agreed to states).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
As it stands i have a button called Start, when this button is hovered over, three more buttons appear at its side (all masked)
I'm having trouble actionscripting the buttons, ive tried putting the AS on the button
on(release){
gotoAndStop(2);
seen as everything so far is done on the first frame on various layers i just need it to go to frame 2. but this doesn't work.
the code that's on the start button is
on(rollOver){
Startmenu.play();
Start menu is the invisible movieclip which has the masks and rollout buttons in.
anyone got any ideas?start button does overlay the other buttons and it is on the main timeline. as is the movieclip which activated the 3 buttons when the start button is rolled over with the mouse.
Date: Fri, 26 Mar 2010 08:39:42 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Masked Buttons
does your start button overlay the other buttons?
is your start button on the main timeline?
is the movieclip with the 3 buttons on your main timeline?
does that movieclip respond to the mouse (and thereby intercept mouse events intended for the buttons it contains)?
> -
Recently I have problems with some buttons on my 8800.
When I hit the trackball the BB writes "Uo". When I hit the 'back' button it writes "Hl". Also the menu button does not what he has to do. Anyone the same problem or even better a solutions for this problem?
Bye, BenYou are not alone. the same thing happened to me today with my 8820.
it worked fine for one call then i hung up and tried looking up a number. Track ball dosn't work at all, their isnt even a backlight on the trackball. the back button types in hl. i also think my e button is enter but i dunno. that one seems on and off.
Edit. I found this:
http://www.blackberryforums.com/general-8800-series-discussion/114752-blackberry-button-problem.html
Message Edited by jasgud on 07-27-2008 08:25 PM -
Hi!
We have a problem with Option buttons.
Example: We create a new document , then we add a group of Option buttons, so far no problem, but we can't have different description on each button. Say we create four option buttons, option 1, option 2, option 3 and option 4. They are now grouped together so that we can only choose one option, but we also want to have different descriptions on the tooltip when the user hovers over. But when we set for example "Option 1" as a description on the first button, all buttons get the same description, what is wrong!
DanA field's Tooltip entry is a "child" of the field's Name (in the General tab of the field's Properties dialog).
So, all fields of the same Name will have the same Tooltip.
Perhaps this is the problem?
Be well... -
IPhone 5, problem "Power, lock- button)
Hi,
my phone is about 3months old now.
I have a problem that suddenly started. problem is lock button.
Sometimes I have to press 3-4 times before it reacts.
I hear a click every time but nothing happens. but now I think
that if I press the left side of the button so it reacts much better,
almost every time. It has no scratches or that I droppt it.
I hope I can change to a new in any store?Apple Warranty Information
Review your support and service coverage
Warranty Information and Support and Service Coverage
Read the warranty
You will need to speak with apple - if this is covered under the warranty you will be okay -
We are making a video game at school. and we are having
problems with the buttons. We are having problems with the action
codes. like gotoandstop. and things like that. it comes up that we
have errors do you have any possible solutions.
Thank you,
Blevins EASTtrx 450 wrote:
> We are making a video game at school. and we are having
problems with the
> buttons. We are having problems with the action codes.
like gotoandstop. and
> things like that. it comes up that we have errors do you
have any possible
> solutions.
> Thank you,
> Blevins EAST
Need more info or file source for us to check.
"My car does not work, what's up with that" is way too
general to even try to
suggest something.
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>
Maybe you are looking for
-
PLEASE HELP - M500 Projector Issue
Hi I just inherited a M500 projector from my cousin who had to move away and I've been trying to get it to accept video signal from either composite video cable (yellow tip), S-Video or HDMI via different converter pieces for the DVI-I port. I haven'
-
Hi, I need for upgrading Hyperion Planning 3.5 to 11.1.x. Please tell me how to export Hyperion Business Rules 3.5.1 to XML or 9.3/11.1 compatible format?
-
Can books/pdfs saved in iBooks be transferred across devices (iPad2 and iPhone4) with iCloud? My documents in Pages is on both the ipad and iphone automatically as soon as i connect both to wifi. The stuff in ibooks did not do this. Also- I am back
-
802.1x / Avaya IP phone
Would like to know this kind of setup it is possible. Avaya IP phone connect to Catalyst 4500 switch and the switch port is configure with 802.1x authentication , the PC is attached to Avaya IP phone. Does it cause IP phone force to authenticate ? Re
-
TS3694 cant restore my iphone has error 1015 what that means?
how can i restore my iphone says error 1015 what this means?