Problem in Summary Calculating

Post Author: CRA
CA Forum: General
Dear All,
I m using Crystal reports 11 and i have a problem basicaly i m using a group like wise employee and it calculate all the employees but the requirement is that only those employees shows which having the salary 0 to 5000 and this section is correctly working but wen its calculating the total summry in footer then it calculate all the employees data(figures). But i just need that only those values or employees figures which in range of 0 to 5000. Only the problem in summary.
Any suggestion or clues highly appreciated.

Post Author: CRA
CA Forum: General
Thnx Ido..... i used condition in formula and it works.
well i did dis. but now the another prob. where employee's salary is ZERO. and in my report m using 3 groups like-wise
Group Head:   CLASS1   -it contains only the class description like city names -
Group Head:   CLASS2   -it contains only the class description like department names like-wise Senior Executive,Staff & Executive -
Group Head:   Employee   -it contains the employee name, designation, salary & etc description like -
dis section is suppress //Group Footer:   Employee   -it contains the employee name, designation, salary & etc description like -
Group Footer:   CLASS2   -In this section we calculate the employee's salary & profit etc class-wise(means which employees in this class only dat will b shown) Senior Executive,Staff & Executive - (dis section is also suppres through using the formula in section expert salary=0 then supress and it works)
Group Footer:   CLASS1   -In this section it calculate all the employee's calculatin Head wise means city-wise (Employees salary etc.)- (dis section is also suppres through using the formula in section expert salary=0 then supress and it works)
But in Class Head description dats still shown the main prob is dis.
        Now the problem is when it calculate the salary when condition meets like i described in previous section through the running total. where got the zero that shows the both class description. But i didn't want dis description if the employees are not in dat class. It means dat If there is no EMPLOYEE in the class then dont show the class description and dat descriptin iz comming from the field.
Any suggestion or any help regarding dis.
Thnx in advance.

Similar Messages

Problem in summary calcu

Post Author: CRA
CA Forum: Crystal Reports
Dear All,
I m using Crystal reports 11 and i have a problem basicaly i m using a group like wise employee and it calculate all the employees but the requirement is that only those employees shows which having the salary 0 to 5000 and this section is correctly working but wen its calculating the total summry in footer then it calculate all the employees data(figures). But i just need that only those values or employees figures which in range of 0 to 5000. Only the problem in summary.
Any suggestion or clues highly appreciated.

Post Author: JKitz
CA Forum: Crystal Reports
So are you using a running total to calculate your summary? If not, use that with the parameter of Salary between 0 and 5000. This should work for you. If not you can set up a manual running total which requires 3 formula fields. I can explain that one later if you need to go that route

Problem with the calculator and modifications needed

i have got a problem with the calculator on my iphone i.e i cannot find any DEL key or Backspace....the problem is when typing a long value if one number is entered wrong we should start again.
EXAMPLE...if i need to type 114678047 * 345612
if acidentally if i type 114678047 * 3455 ( then i should start over typing "C" key)
i should start over to type the whole data..if we have a delete key we can just correct it right away and continue.....rather than starting over
we can find this feature in all the other smart phones , i dont know why apple coudnt find that
even every scientific calculator have a DEL key...
Thanks
vickyk7

FEEDBACK
If you want to give Apple feed back then do it here http://www.apple.com/feedback/iphone.html

Problem with a calculated member browsing cube with a specific user role

Good evening to all of you .
I am not a newbie about SSAS nor an expert developer.
I use SSAS 2008 R2 Standard Edition.
I try to simplify my problem with a calculated measure.
I have a CUBE with :
[Measures].[Sales Amount]
Dimension STORES - Dimension CUSTOMERS - Dimension DATE
I have also 2 user roles :
Direction Role can see all members of all dimensions.
Customize Role has a restriction about Dimension STORES ..it can see only a STORE of all (Suppose to have 100 stores).
User that has a Customize Role, when browse cube in Excel , want to see for a specific CUSTOMER , Sales Amount of his own STORE but also the total Sales Amount of ALL STORES for that Customer...
Is it possibile to do that ???
Can you give any suggestion also using Adventure Works Cube ???
I was able to create a calculated measure like that below.
It does not work...It give the same result of Sales Amount
It seems that Customize Role win Always about every kind of calculate measure i need to create..
i.e SUM([STORES].[STORES].[ALL STORES],[Measures].[Sales Amount])
Thanks in advance.

Hi maretix,
According to your description, you have a customize role which limit the user can only see data about his own STORE. Now this user wants to see the total Sales Amount for his own STORES only. Right?
In Analysis Services, when granting custom access to dimension data, it has a option "Enable Visual Total" in Advanced dimension security. By default, the
VisualTotals property is disabled (set to False). This default setting maximizes performance because Analysis Services can quickly calculate the total of all cell values, instead of having to spend time selecting which
cells values to calculate. So you always get same result which is the total for all STORES.
In this scenario, please select this option. When you enable the VisualTotals property, your custom role can only view aggregated totals for dimension members to which the role has permission.
Reference:
Grant custom access to dimension data (Analysis Services)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

Hyperion planning data form in smartview: problem with summary time period

We are using Planning ver. 11.1.2.2.300.20 and smartview 11.1.2.2.300 (build 070)
We use common Data Form:
In columns: Periods (Descendants including YearTotal - with no checkbox on start expanded)
In Rows :accounts
In some of our users computers,
When they open Data Form in Excel (with Smart View) - its appears very strange:
Summary Accounts are displayed as level 0 account in the summary Period columns (i.e. not in grey) and permit entering data.
In addition when Entering data in summary time period (i.e. Year or Quarter),
strangely, the data doesn't spread to the descendants months (level 0) .
This phenomenon occurs just in few of the computers.
Please help, how can we overcome this problem?
Thanks and Regards
Tami Kedem

Hi Celvin,
Thanks for your rapid response!
All computers have the same version of planning and smartview.
The computers where the Periods spreading and aggregation properties in Data form are not working,
do work wonderfully when opening the Data forms in the web.
I've tried everything, (remove suppressing, validations etc.):
In all kind of data forms the spreading and aggregation properties on summary time periods are not working in smartview -
and summary accounts on rows are not displayed in grey and permit entering data.
We remove and reinstall MS-Office (2007) from the problematic computers, but it didn't help.
Do you know if there is any kind of settings or softwares that might cause this phenomenon
i.e. interrupts the smartview translation of the web Data Forms.
Thank and best regards,
Tami Kedem

Problem in a calculation in Oracle Answers

Hello experts.
I am facing some trouble in making a report.
Dimensions and Facts are like this.
Dimensions: Year Month, Quarter, Employee Name , Attribute Name (like A,B,C,D...I)
Facts : Attribute Fact1, Attribute Fact2, Attriute Fact3
Now we need to show DATA as follows
Columns:
Year | Month Quarter | Employee Name | (Attributes Name) A,B,C,D....J
Measure: (A calulation on Fact1,Fact3 and Fact3)
Eg. ((Fact1*Fact2)/Fact3)
We used a Pivot Table to draw this analysis:
In ROWS we put Year | Month | Quarter | Employee Name
In Measures_Lables We put 'Attribute Name'
In Measures we put an calulated column: ((Fact1*Fact2)/Fact3)
Now problem is there is one condition that if value of ((Fact1*Fact2)/Fact3) for Attribue 'A' is Zero then we need to multiply rest of Attributes with some Factor, lets day 10
I tried to put following Formulla/Expression:
CASE WHEN
IF NULL
(CASE WHEN Attribute.Name IN ('A') THEN ((Fact1*Fact2)/Fact3) END)
,0
) = 0
) THEN
((Fact1*Fact2)/Fact3)*10
ELSE
((Fact1*Fact2)/Fact3)
END
that is I am checking if Calculation for that Attribute ('A') is Zero then multiply by with 10 else just show calculation.
What happend is as soon as I apply CASE on Attribute 'A' value of other Attributes go out of scope for that particular CELL, so for these cells (except A) 'IF NULL' block is evaluated true
For example if data set is like this
Year | Month | Quarter | Employee Name | A | B |
2009 Jan Q1 Emp1 10 20
2009 Jan Q1 Emp2 0 20
THEN as per above my formulla resut it give is like this
Year | Month | Quarter | Employee Name | A | B |
2009 Jan Q1 Emp1 10 200
2009 Jan Q1 Emp2 0 200
So, for all other Attributes it muliplied by 10 because for all other cells it find value of A is 0 so it multiplies by 10
I am starting to think it might not be possible to do it this way.
Please suggest me a better way for this problem:

You could write a view over the table that has the XML column and use Oracle XML DB functions to extract and represent the data in a table format. You can then map this view in Oracle BI Administration.
I think stuff like XML transformations and extraction etc. is no task for Oracle BI and is best left to the Oracle Database.
Thanks,
Nilanshu.

Problem in overhead calculation of production order after TECO

Dear All,
Just for reconfirmation can you tell me what is the actual sequence of steps used in Closing of Production order i.e
First we have to do TECO of an order and then we have to calculate Overhead.(KGI2).
I am asking this question because i have observed that order which are get TECO before Overhead calculation, if you see the cost analysis, system will not update overhead value in order and the difference get posted in Variances after settlement.
If we have to do vice versa then there will be the problem as user do the TECO of an order as an when production order completed, overhead calculation is the work of costing department and they will do it at month end only hence system will always post variance for the overhead value.
Kindly suggest.
Regards,
Shayam

Hi,
Normally, you need to check the transactions allowed when the status TECO is set. However, status is set only when the sequence of the steps are completed during month end. Transactions like the WIP, variances, settlement etc as you may have bach jobs running to set the status.
Kind Regards
Umapathi G

I think I found a problem with the calculator application.

I'm a south korean highschool student and I think I found a problem with calculator application. I use iPod touch 4th generation with iOS 5.0.1. I was playing with calculator app and I found out that 0.1!(factorial) is 0.951350769866873. This can't be right bacause factorial calculation can only be definrd whan n is natural number or 0(in n!). I want apple to correct this error.
And if you are someone working with apple, please let me know the algorithm of factorial calculation(if possible). I would be grateful if I can have a chance to study the algorithm and find out what made 0.1! possible.
so question.
do anybody know how to send an email to apple? I tried but I couldn't find the address.

Apple doesn't dialogue with users via email the way you want, but you can report such problems to them via
http://www.apple.com/feedback/
But in this particular case you should be aware that factorial can in fact be done for non-integers:
http://en.wikipedia.org/wiki/Factorial#Extension_of_factorial_to_non-integer_val ues_of_argument

I have a problem with my calculator :(

hi all,
i need some help with my calculator..after i wrote the code i discovered my mistake so i made some changes on the code..the problem is that it's still applying the old code !!
( i didn't forgot to compile it, & i closed all the browsers b4 trying it )
i will appreciate ANY suggestion
P.S : my mistake was with the operations buttons ( add, sub, multip, division ) & the equal button
if it may help, this is the code ( the new one, then the old one )
the new code:
import java.awt.* ; // Container, FlowLayout
import java.awt.event.* ; // ActionEvent, ActionListener
import javax.swing.* ; // JApplet , JButton , JLabal, JTextField
public class Calculator2 extends JApplet implements ActionListener {
// graphical user interface components
JTextField field ;
JButton zero, one, two, three, four, five, six, seven, eight, nine, fraction, clear,
add, sub, multip , division, equal ,sin , cos, tan ,log ,sqrt ,exp ;
// variables
String string = " " ; // to store what is in the text field
String operation ; // to store the operation selected
double operate ; // to store the result of the operation selected
double operand1 , operand2 ; // the operands of the operation
// set up GUI components
public void init ()
Container container = getContentPane ();
container.setLayout ( new FlowLayout () );
// create a text field
field = new JTextField ( 17 );
container.add ( field ) ;
// create buttons
clear = new JButton ( "C" ) ;
clear.addActionListener ( this ) ;
container.add ( clear );
zero = new JButton ( "0" ) ;
zero.addActionListener ( this ) ;
container.add ( zero );
one = new JButton ( "1" ) ;
one.addActionListener ( this ) ;
container.add ( one );
two = new JButton ( "2" ) ;
two.addActionListener ( this ) ;
container.add ( two );
three = new JButton ( "3" ) ;
three.addActionListener ( this ) ;
container.add ( three );
four = new JButton ( "4" ) ;
four.addActionListener ( this ) ;
container.add ( four );
five = new JButton ( "5" ) ;
five.addActionListener ( this ) ;
container.add ( five );
six = new JButton ( "6" ) ;
six.addActionListener ( this ) ;
container.add ( six );
seven = new JButton ( "7" ) ;
seven.addActionListener ( this ) ;
container.add ( seven );
eight = new JButton ( "8" ) ;
eight.addActionListener ( this ) ;
container.add ( eight );
nine = new JButton ( "9" ) ;
nine.addActionListener ( this ) ;
container.add ( nine );
fraction = new JButton ( "." ) ;
fraction.addActionListener ( this ) ;
container.add ( fraction );
add = new JButton ( "+" ) ;
add.addActionListener ( this ) ;
container.add ( add );
sub = new JButton ( "-" ) ;
sub.addActionListener ( this ) ;
container.add ( sub );
multip = new JButton ( "*" ) ;
multip.addActionListener ( this ) ;
container.add ( multip );
division = new JButton ( "�" ) ;
division.addActionListener ( this ) ;
container.add ( division );
sin = new JButton ( "sin" ) ;
sin.addActionListener ( this ) ;
container.add ( sin );
cos = new JButton ( "cos" ) ;
cos.addActionListener ( this ) ;
container.add ( cos );
tan = new JButton ( "tan" ) ;
tan.addActionListener ( this ) ;
container.add ( tan );
log = new JButton ( "log" ) ;
log.addActionListener ( this ) ;
container.add ( log );
sqrt = new JButton ( "sqrt" ) ;
sqrt.addActionListener ( this ) ;
container.add ( sqrt );
exp = new JButton ( "exp" ) ;
exp.addActionListener ( this ) ;
container.add ( exp );
equal = new JButton ( "=" ) ;
equal.addActionListener ( this ) ;
container.add ( equal );
} // end of method init
public void actionPerformed ( ActionEvent event )
     // button zero
     if ( event.getSource()== zero )
     string = string + "0" ;
     field.setText ( string ) ;
     // button one
     else if ( event.getSource()== one )
          string = string + "1" ;
          field.setText ( string ) ;
     // button two
     else if ( event.getSource()== two )
          string = string + "2" ;
          field.setText ( string ) ;
     // button three
     else if ( event.getSource()== three )
          string = string + "3" ;
          field.setText ( string ) ;
     // button four
     else if ( event.getSource()== four )
          string = string + "4" ;
          field.setText ( string ) ;
     // button five
     else if ( event.getSource()== five )
          string = string + "5" ;
          field.setText ( string ) ;
     // button six
     else if ( event.getSource()== six )
          string = string + "6" ;
          field.setText ( string ) ;
     // button seven
     else if ( event.getSource()== seven )
          string = string + "7" ;
          field.setText ( string ) ;
     // button eight
     else if ( event.getSource()== eight )
          string = string + "8" ;
          field.setText ( string ) ;
     // button nine
     else if ( event.getSource()== nine )
          string = string + "9" ;
          field.setText ( string ) ;
     // button fraction
     else if ( event.getSource()== fraction )
          string = string + "." ;
          field.setText ( string ) ;
     // button clear
     else if ( event.getSource()== clear )
          clear ();
     // button add
     else if ( event.getSource()== add )
          operand1 = Double.parseDouble ( string );
          operation = "+" ;
          clear ();
     // button sub
     else if ( event.getSource()== sub )
          operand1 = Double.parseDouble ( string );
          operation = "-" ;
          clear ();
     // button multip
     else if ( event.getSource()== multip )
          operand1 = Double.parseDouble ( string );
          operation = "*" ;
          clear ();
     // button division
     else if ( event.getSource()== division )
          operand1 = Double.parseDouble ( string );
          operation = "/" ;
          clear ();
     // button sin
     else if ( event.getSource()== sin )
          operate = Double.parseDouble ( string ) ;
          operate = Math.sin( operate );
          field.setText ( Double.toString ( operate ) ) ;
// button cos
     else if ( event.getSource()== cos )
          operate = Double.parseDouble ( string ) ;
          operate = Math.cos( operate );
          field.setText ( Double.toString ( operate ) ) ;
     // button tan
     else if ( event.getSource()== tan )
          operate = Double.parseDouble ( string ) ;
          operate = Math.tan( operate );
          field.setText ( Double.toString ( operate ) ) ;
     // button log
     else if ( event.getSource()== log )
          operate = Double.parseDouble ( string ) ;
          operate = Math.log( operate );
          field.setText ( Double.toString ( operate ) ) ;
     // button sqrt
     else if ( event.getSource()== sqrt )
          operate = Double.parseDouble ( string ) ;
          operate = Math.sqrt( operate );
          field.setText ( Double.toString ( operate ) ) ;
     // button exp
     else if ( event.getSource()== exp )
          operate = Double.parseDouble ( string ) ;
          operate = Math.exp( operate );
          field.setText ( Double.toString ( operate ) ) ;
     // button equal
     else // if ( event.getSource()== equal )
          operand2 = Double.parseDouble ( string );
          if ( operation == "+" )
               operate = operand1 + operand2 ;
          else if ( operation == "-" )
               operate = operand1 - operand2 ;
          else if ( operation == "*" )
               operate = operand1 * operand2 ;
          else if ( operation == "/" )
               operate = operand1 / operand2 ;
          field.setText ( Double.toString ( operate ) ) ;
} // end of method actionPerformed
public void clear ()
     string = " ";
     field.setText ( string ) ;
} // end of method clear
} // end of class
the old code which have the problem ( which i make the changes on ) :
     // button clear
     else if ( event.getSource()== clear )
          string = "";
          field.setText ( string ) ;
     // button add
     else if ( event.getSource()== add )
          string = string + "+" ;
          field.setText ( string ) ;
     // button sub
     else if ( event.getSource()== sub )
          string = string + "-" ;
          field.setText ( string ) ;
     // button multip
     else if ( event.getSource()== multip )
          string = string + "*" ;
          field.setText ( string ) ;
     // button division
     else if ( event.getSource()== division )
          string = string + "/" ;
          field.setText ( string ) ;
     // button equal
     else // if ( event.getSource()== equal )
          operate = Double.parseDouble ( string ) ;
          field.setText ( Double.toString ( operate ) ) ;
thanks a lot :)

Open Java console and press "x" (Clear cache)
Disable caching in java paremeters.

Problems with shipping calculations

We have been working with BC eCommerce since the beginning of 2013.
We have been working with UPS and the checkout shopping cart get the shipping costs from UPS.
However we are experiencing a problem with big orders due to the fact that big orders require a second or even a third box and then UPS charges are higher than the calculation
here is what is happening righ now:
we can house 4 products in a box. Each product weights 10.5 pound.
In orders of 4 or less products we dont have a problem. UPS calculates 1 box of 42 pounds.
Let's say we have to ship 7 products, then we have a 42 pounds box and a 31.5 pounds box but the system has calculated a box of 73.5 pound which is lower than shipping the two individual orders.
even using ground transportaion this problem represent 5 to 10 when shipping two boxes and it will grow even bigger when we have to ship 3 boxes (almost $40).
I appreciate your ideas on how to solve this problem.
Thanks

I too, am having issues with inaccurate FEDEX shipping costs.
Our FEDEX rep has provided evidence that somewhere along the way, the measurements sent to the FEDEX server, is being provided to FEDEX in metric measurments.
Which is very strange, as our store is setup in English System of Measurments (U.S. Customary System and the Britich Imperial System) meaning that our dimensions and weight within the BC system are in inches and pounds. (BC support has confirmed that the setup is correctly for inches and pound measurement)
The result is that the shipping costs generated using integrated FEDEX on BC can be significantly lower than when using the same account info on the client's FEDEX web portal. This signicantly cuts into profits - and in some cases the client can loose money after making an online sale!
Is anyone else finding this to be the case? Does anyone have any suggestions? My client is very, very frustrated - and naturally does not want to lose money on shipping. Any help appreciated. Thanks.
TheBCMan - I know you specialize in shipping calculators, have you come across this?
GeckoTales - did you ever develop or come across a work-around?
Thanks everyone. Hope someone has come across this. Am getting desparate.

Problem with array calculations

The only problem I have now is, instead of calculating the payments at 7 years/5.35%, 15 years/5.5%, and 30 years/5.75%, it's calculating them for 7 years at 5.35%, 5.5%, and 5.75%, 15 years at 5.35%, 5.5%, and 5.75%, and so on. I don't need it to do all of that, I need the years to correspond to the correct interest rate. How can I change that? Thank you so much. Here is my new code:
class PaymentArray {
     public static void main(String[] arguments) {
          double amount = 100000;
          int[] term = {7, 15, 30};
          double[] rate = {.0535, .055, .0575};
          for (int i = 0; i < term.length; i++) {
               for (int j = 0; j < rate.length; j++) {
                    System.out.println("If the initial loan amount is " + amount);
                    System.out.println("and the length of the term is " + term[i] + " years");
                    System.out.println("and the monthly interest rate is " + rate[j]);
                    double payment = (amount*(rate[j]/12))/(1-(Math.pow(1/(1+(rate[j]/12)),(term*12))));
                    System.out.println("The monthly payment will be " + payment);

Bollocks! The code tags got me!
You don't need two loops.
class PaymentArray {
     public static void main(String[] arguments) {
          double amount = 100000;
          int[] term = {7, 15, 30};
          double[] rate = {.0535, .055, .0575};
          for (int i = 0; i < term.length; i++) {
                    System.out.println("If the initial loan amount is " + amount);
                    System.out.println("and the length of the term is " + term[i] + " years");
                    System.out.println("and the monthly interest rate is " + rate);
                    double payment = (amount*(rate[i]/12))/(1-(Math.pow(1/(1+(rate[i]/12)),(term[i]*12))));
                    System.out.println("The monthly payment will be " + payment);

Problem with Context - calculated Value

I have a problem with my WebDynPro-Project.
The Errors which is shown by the NWDS:
"Web Dynpro Generation: Metadata constraint of Component KeyMappingComponent is violated: CalculatedAttributeProvider "//WebDynpro/Controller:de.vwfsag.keymapping.ui.KeyMappingComponent/CalculatedAttributeProvider:BusinessAttributeDataSprache", Role "Attribute": A minimum of 1 object(s) is required"
What I've done:
- changed valueproperties calculated from "true" to "false" and back.
The problem is that the set und get methods remained after resetting the calculateproperty to "false".
I've tried several time to switch the property but now I got more remained set and get methods (..._1, ..._2, ...), which I can't delete in the NWDS.
What I also tried was to change the .wdcontroller"-file of my controller-component, but this file is generated so after a rebuild the ".wdcontroller"-file is still corrupted.
I think the conclusion should be something to delete these methods or change the calculatedproperty in some files you can't access directly from the NWDS.
I hope anyone could help me out with this?
Greetz Christian
Edited by: christian.zuehlsdorf on Dec 14, 2009 6:24 PM

Tushar Sinha wrote:Tushar Sinha wrote:Hey Sinha,
thank you fr your answer!
>
> Just try deleting the attribute for which you tried setting the calculated property as true and then false, try repairing your project, reload and build again. Hopefully this should get you rid of the getters and setters.
That was the first thing I already tried. I deleted the whole context und then rebuild and repair and rebuild... But none of that help.
>
> Do, not manually try deleting the getters/setters manually for any attribute as it is autogenerated for an attribute.
These getters/setters only have part of the configuration with no context-attribute-bind, which in fact seems to be the problem for the build-process.

New MBP - wireless/internet access networking problem - a summary!

Greetings!
New MBP here, with all the trimmings (MacOS X 10.4.10 - Safari 3 Beta). New also to the Apple/MAC world
MBP >> wireless networking into a Linksys WRT54G router and >> thru HughesNet DW7000 Satellite Internet connection (not the fastest, but hey, the US and especially rural areas are NOT S. Korea when it comes to speedy internet connections!
Frankly, I bought into it for two reasons: First, hearing about the vaunted Mac a/v/ and doc/photo editing capabilities,... and about MacOS stability, etc... Well, it all needs a little work still: on the part of new users like me, but also probably on the part of the Apple/Mac people as well. 2nd reason I decided to purchase the MBP - i.e. ability to run Windows (I have not yet tried BootCanp, etc...: still resolving preliminary issues!). I still live in a heavy Win environment at my business - no other way of course!
Communications issues seem to still prevail: I am hanging out at several VERY HELPFUL forums (AppleDiscussionForum, MacRumorsForums, etc...) and the same issues keep popping up. Im my case, same as all above reported, with a few additional points, as follows:
1. Xmission errors: seem to be - at least in my case - a constant factor, regardless on how close/far i am from my wireless router. For example, I would be attempting to dwnload an upgrade (large)QT or MacOS file. i am barely into the dowmoad, and I already have several Read/Send errors. By the end of the download, I will have probably about 15 Rcv and 5 Send errors. Never gets quite that bad in my Win machines, I must mention. Anything to do here (I know, there are such things always affecting wireless com). AND, MOST importantly, how that this affect the effectiveness of the upgrade (I spotted same thing with MacOS 10.4.10 and Safari Beta 3 upgrade downloads!). Would it be likely that applying upgrades in such circumstances would screw up the OS??? Could OTOH such errors be automatically "compensated" by re-xmits from the source, and eventually the download would be OK? Because quite frankly, I do NOT know if my important upgrade download was OK to apply to the system, given those errors!!!
Also same thing with PING errors. Quite frequent when pinging another device on my network.
2. Quite often, accessing a site will proceed somehow OK, and then things will get stuck twd the end, as if some buffer somewhere gets overloaded??? Of course, as elsewhere reported, same can often happen with com getting stuck right over the "www" part of the URL!
3. AND, of course, the often reported "NO connection to the Internet", but computer shows good signal level and connection otherwise.
4. Strangely enough, seems that the Airport Extreme wifi card sort of "warms up the the internet" as one proceeds to start using it. It eventually picks up on a network, and often "improves" its connection over time!
5. Built in Airport Extreme seems to not exhibit up all immediately surrounding networks. Sensitivity issue?? iStumbler does.
6. iStumbler permanently posts noise level of 9% regardless of how close to my wireless router/broadband modem I am. Anyone uses iStumbler to monitor network traffic?
This is getting longuish: I just want to get over all those p*ant issues and get into putting my a/v stuff together!!
- Roger T
Thanks for just reading all this!. I am not sure it is all fixable (back to the Win "features" terminology, really meaning "bugs"??)

Thanks, BDaqua. This support forum is quite well stocked: I have been perusing all its nooks and cranies!
On the www.dslreports.com - All things Mac - forum, I spotted a couple of mentions of the following type of infromation:
link: »www.hardmac.com/news/2007-07-27/#7039
- The first TechNote provides information concerning the Airport problem affecting the MBP Santa Rosa (but also other Mac Intel). When used on battery, the wireless connection drops and one can even experience kernel panic. Apple Centers are asked not to exchange affected notebook as this is due to a unidentified bug in the Atheros driver, and should be fixed in the future with a simple Airport system update. So for the moment, unfortunate users are asked to directly power their notebook when using wireless network, or using Ethernet connection when running on battery... in other words, turn your notebook into a desktop
to forum · permalink
I am wondering if you and folks on this close-to-Apple forum know anything about this. At least, we could just await remedy instead of messing around endlessly looking for solutions and... pondering as to whether it was a wise thing to purchase an expensive machine which happens to have trouble communicating online. After all, seems that the Mac folks are prone to spend MORE time online uploading/downloading music and videos instead of my being normally doing with the rest of my (Win) computers, i.e. work on customer lists, correspondence, inventories, accounting, data bases, etc....
So, seems to me we do have a pb and Apple might just save a few $$$ on silly ads and get to work on com instead. if nothing else to avoid the appearance of further - admittedly rather funny - ad-spoofs!
So back to your further inquiry. I run a wireless network from a HughesNet satellite modem, thru a Linksys WRT54GL wireless router, into some nearby office LANed desktops and point of sale equipment, to another neighbouring facility via wireless bridge, and to my Mac laptop. Distance from the laptop to the router: 50 ft max.
It all works surprizingly very well: up to 200kbps up and 1000 kbps down (in prime time, 150 up and 600 down). OK, my set up looks complex and incurring LOTS of activity. Actually, online activity is quite minimal and well scheduled - right now I am the only machine on the network online. Otherwise, our office processes online money wiring for customers among other things.
I'll try your DNS server choice on the Mac settings first. Will report accordingly.
Thanks for everything!
- Roger T

Problem with prorata calculation of pf contribution

Hello
I have an issue in employee pf calculation on selecting the eligible pay or pf basis whichever is less in infotype 587. When i select this option in IT-587 the pf contribution gets restricted to Rs.780
Now in case the employee is absent for a couple of days in a month then this calculation gets reduced.eg if one day absesnce is there it becomes 755(780/31*30). Here the employee pay is more than the pf basis which is Rs.6500
I need to the system to continue deducting 780 till the employee receives more than 6500, even though he may be absent.i.e prorating should not take place in such cases.
regards
sameer
Message was edited by:
sameer k

Hi
You can do at two ends
1 INEPF.
2 By rule.
I will prefer the INEPF.
Now jsut do one thing ask the ABAPer to debugg it , in INEPF it is calulating dont know exact code.
it is easy to find out .
And add the codings after the calculation.
It will be very easy.
Manoj Shakya.
Close the thread.

Problem with date calculation

I am a rookie in SAP i have a small problem with date.Do we have any function module to find out the first day in a month if we give out the system current date ?? Pls help me out.

Hi,
As Ganesan told,you can do.
Here is the sample code.
data v type sy-datum.
data d type DTRESR-WEEKDAY.
v+6(2) = '01'.
v4(2) = sy-datum4(2).
v0(4) = sy-datum0(4).
CALL FUNCTION 'DATE_TO_DAY'
EXPORTING
date = v
IMPORTING
WEEKDAY = d.
write d.

Problem in Summary Calculating

Similar Messages

Maybe you are looking for