Problem in system messages

Hi Gurus
I am creating a PO with refernce to the PR i am able to use the same PR which is been already ordered for the sbsequent new PO creation
Though i have set the system messages
06 099
06 405
06 421
06 608
to ERROR.
When i am creating a PO with refernce to the PR i am not getting any error or warning message if the PR qty is already ordered in full.
Is there any config to be done
Sunil

Go to SPRO-MM-Purchasing-Environment Data-Define Attributes for System Messages and Set the Following Messages numbers as Error and Save.
06 076 Materials of requisition & item & alr. ordered in full
06 608 Requisition already converted into purchase order & &
06 648 Requisition quantity already ordered in full (see follow-on docs.)

Similar Messages

System message problem in pr

Hi Experts ,
I have a problem with system message which is not visible when action is taken.For example we don't want to user to enter different purchasing group in pr and I do system message for this which is standart number:68 and when I 've tested this message is not appear when different purchasing group is entered .What kind of problem here I need your help .
Thanks in advance

Hi,
Just take the last record message tab.
Please check it.
    CALL TRANSACTION 'CT04' USING i_bdc_data
                              OPTIONS FROM l_opt
                               MESSAGES INTO i_message.
      l_msgindex = LINES( i_message ).
      CLEAR l_wa_message.
      READ TABLE i_message INTO l_wa_message INDEX l_msgindex.
      IF sy-subrc = 0.
        CALL FUNCTION 'FORMAT_MESSAGE'
          EXPORTING
            id        = l_wa_message-msgid
            lang      = sy-langu
            no        = l_wa_message-msgnr
            v1        = l_wa_message-msgv1
            v2        = l_wa_message-msgv2
            v3        = l_wa_message-msgv3
            v4        = l_wa_message-msgv4
          IMPORTING
            msg       = l_bdcmsg
          EXCEPTIONS
            not_found = 1
            OTHERS    = 2.

System message problem

Hi All
I have created a form using screen painter
I have done all the functionalities and validation.
No problem, Every thing is clear.
But When I close the form(that is while pressing the X symbol)
A system message appears.
Do you want to save the changes?
With three buttons Yes No Cancel
I don't want this message box to appear.
Is there any way to block this message bar.
Thank you in advance
-Anto

Hi Doshi
I have changed the property of the form as NO TITLE.
I have put a picture box of the title which looks like that.
Now X mark is also there.
So I have again given it in another picture box.
So that I can catch the item press event from it.
In the item press I have typed the coding which I mentioned before.
So no cancel button is here.
No save Button is here.
No exit button is here.
-Anto

Problem Connecting to Sun Java(tm) System Messaging Server 6.2-3.05

Hi All,
I am trying to connect to Sun Messaging Server from my program. Till now I tested the program against all other popular IMAP servers with out any problem. I have set the debug to true. I am not able to figure why the connection is getting reset. Any help would be greatly appreciated
Thanks in Advance
Srinivas
DEBUG: setDebug: JavaMail version 1.4.1ea-SNAPSHOT
* OK [CAPABILITY IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY LANGUAGE XSENDER X-NETSCAPE XSERVERINFO AUTH=PLAIN] Messaging Multiplexor (Sun Java(tm) System Messaging Server 6.2-3.05 (built Nov 23 2005))
IMAP DEBUG: AUTH: PLAIN
A0 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY LANGUAGE XSENDER X-NETSCAPE XSERVERINFO AUTH=PLAIN
A0 OK CAPABILITY completed
IMAP DEBUG: AUTH: PLAIN
A1 LOGIN KBahadur mypassword
javax.mail.MessagingException: * BYE JavaMail Exception: java.net.SocketException: Connection reset;
nested exception is:
     com.sun.mail.iap.ConnectionException: * BYE JavaMail Exception: java.net.SocketException: Connection reset
     at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:476)
     at javax.mail.Service.connect(Service.java:275)
     at javax.mail.Service.connect(Service.java:156)
     at com.gavs.mail.receiver.MailReceiver.receive(MailReceiver.java:74)
     at com.gavs.mail.receiver.MailReceiver.poll(MailReceiver.java:39)
     at com.gavs.calendar.server.HTTPPushServer$4.run(HTTPPushServer.java:72)
Caused by: com.sun.mail.iap.ConnectionException: * BYE JavaMail Exception: java.net.SocketException: Connection reset
     at com.sun.mail.iap.Protocol.handleResult(Protocol.java:315)
     at com.sun.mail.imap.protocol.IMAPProtocol.login(IMAPProtocol.java:307)
     at com.sun.mail.imap.IMAPStore.login(IMAPStore.java:521)
     at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:456)
     ... 5 more

I vaguely remember that there was a Messaging Server bug that
caused it to fail because JavaMail was sending it two packets
containing the data but it was expecting all the data to be in one
packet. I thought JavaMail was fixed to send it one packet, to
avoid the bug, and I thought the server was fixed as well so be
sure to check for relevant patches. And be sure you're using the
latest version of JavaMail.
If I remember correctly, telnet was batching the data for the entire
line and sending it in a single packet, which is why it worked when
using telnet.
You might try a network protocol analyzer (sniffer) like snoop on
Solaris or tcpdump on Linux to see exactly what packets are being
sent.

Problem with GlassFish and Sun Java System Message Queue

Hi,
I used application server PE.8 and I upgraded to Sun Java System Application Server Platform Edition 9.0 Update 1 Patch 1, and I changed all my CLASSPATH and everything. My system is working fine, but the Sun Java System Message Queue that I used before is still showing the queues and physical queues of the previous application server, not the new one. Do you know if there is way to change that and link it to the new version?
thanks

Use an ESB like ServiceMix to bridge JMS providers
http://servicemix.org/
Or write your own MessageListener to consume from one JMS and publish on another one. Be careful with queues to avoid loosing the ordering - so you probably want to use a single MessageListener per subscription/queue - or to take advantage of Tibco's exclusive queues to ensure ordering is preserved. If ordering doesn't matter then don't worry too much about it and maybe have a pool of consumers to improve throughput
James
http://logicblaze.com/

SAP System Message: Syntx error or generation error in a screen

dear sap basis gurus,
i am currently having problems signing on to our DEV server. i get this error message:
<SID>: SAP System Message
Syntx error or generation error in a screen.
it won't let me log on.
there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
have you encountered this problem before? please help me as there we have two imminent go-lives.
thank you very much in advance.
best regards,
albert

hello nick, ashok,
thank you very much for your responses.
i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
i hope i would no longer encounter the error message.
again, thank you.
best regards,
albert

How can I clean up queue one-time on Sun Java system messaging 6.3

Hi,
<address>Our Email server have a problem, When I run _./imsimta qm directory tcp_local_, There are about 5 Millions of messages in the queue.</address>
Now our Email server send messages very slowly, how can I clean up queue one-time?
the command _./imsimta qclean_ is very slowly.
What can I do to prevent this problem?
our Email server version is :
Sun Java(tm) System Messaging Server 6.3-6.03 (built Mar 14 2008; 32bit)
libimta.so 6.3-6.03 (built 17:12:37, Mar 14 2008; 32bit)
SunOS email-1 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-V890
Thank you !

If you have more than 100,000 messages in the queue, then look at the MAX_MESSAGES parameter in [the job_controller.cnf file|http://wikis.sun.com/display/CommSuite/Job+Controller+Configuration+File]. If the parameter is not specified, it defaults to 100000. If you have more than that number of messages in the channel queues, it will take a long time for new/legitimate messages to be sent because job_controller is only considering the first 100,000 messages in the queue.
If you get into the "imsimta qm" command do do "sum -database", it will show a summary of what job_controller has in its internal cache and therefore what job_controller is working on. If you compare that to "sum -directory" you will probably see a difference.
If these are all legitimate messages, you need to increase MAX_MESSAGES, cnbuild, and restart job_controller.
If they are not, then preventing this in the future will require determining how they got into your queue and correcting that.
As for removing them, the "imsimta qm" commands allow you to select messages by various criteria and then you can "return" or "delete" them. But yes, that will take a long time if there are many messages because it is a single threaded process and it needs to open and examine each message. You may be able to accomplish the task more quickly with a shell script that works on individual channel queue subdirectories and then run multiple copies of that script in parallel. After you have cleaned out the queue, restart job_controller.
Also, you might want to consider [the subdirs channel keyword|http://msg.wikidoc.info/index.php/Subdirs_and_nosubdirs_Channel_Options].

Error in local message system; message 009999000035 not complete

Hello All.
I have configured Service desk in SolMan 7.0 which has patch level 14 and also configured in Satellite systems. I am using SM_...._BACK RFC connection in BCOS_CUST table. The user used by SM_...._BACK have the following roles in SolMan
SAP_SUPPDESK_CREATE,SAP_SV_FDB_NOTIF_BC_ADMIN
and SAP_SV_FDB_NOTIF_BC_CREATE.
However, when I try to create support message (Help --> Create support message) in satellite system, i am getting Error in local message system; message 009999000035 not complete.
I have also checked for Product_ID parameter which is not existing.
One important thing is, I can create support message in satellite system if I give SAP_ALL in that RFC user using in SM_...._BACK connection in SolMan.
So, this shows clearly that it is an issue with role/authorization.
Please suggest me !!
Thanks in advance.
Regards,
Satish.

Hmm not really. Profiles for the roles are also generated?
Those roles/profiles should be sufficient to create support messages.
Even though you assigned SAP_ALL and it worked afterwards I cannot imagine you got an auth. problem here anymore.
When assigning SAP_ALL did you really assign SAP_ALL to the RFC user or did you assign another user (who got SAP_ALL auth.) to the RFC connection?
The user who was logged on to the satellite system when the support messages have been created (with and without SAP_ALL assigned to the RFC user) has always been the same?
Just to make sure: did you set NO_USER_CHECK = X in Sol Man tx: DNO_CUST04?

System Message Shows in Future Date

Dear Experts,
In Our SAP BI System , The System Message SM21 shows in Current & future date both problem messages
SAP Server OS and SAP BI Application Time and date both are in sync
The BI system which is connected to ECC PRD also having a sync
Remote monitoring are not configured in this system,
System Log: Local Analysis of GEEPASBIPRD                  2
Date : 22.12.2010
Time     Type Nr Clt User         TCode Priority Grp N Text
10:02:54 DIA 001 350 GPKWTHOFI03                 BY E Invalid parameter ObjTooLar
10:04:07 DIA 001 350 GPKWTHOFI03                 BY E Invalid parameter ObjTooLar
                   System Log: Local Analysis of GEEPASBIPRD                  3
Date : 02.01.2201
Time     Type Nr Clt User         TCode Priority Grp N Text
20:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
20:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
20:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
20:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
20:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
20:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
20:20:90           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
20:20:90           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
40:20:81           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
40:20:81           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
40:20:81           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
40:20:81           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
40:20:81           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
40:20:81           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
71:31:41           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
71:31:41           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
90:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
90:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
90:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
90:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
90:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
90:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
                   System Log: Local Analysis of GEEPASBIPRD                  4
Date : 03.01.2201
Time     Type Nr Clt User         TCode Priority Grp N Text
00:20:85           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
00:20:85           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
                  System Log: Local Analysis of GEEPASBIPRD
          C o n t e n t s
Content            Page         Start          End
Selection criteria   1
                     2 22.12.2010 10:02:54 22.12.2010 10:04:07
                     3 02.01.2201 20:20:84 02.01.2201 90:20:84
                     4 03.01.2201 00:20:85 03.01.2201 00:20:90
                     5 02.01.3201 01:23:65 02.01.3201 90:40:42
                     6 03.01.3201 00:40:41 03.01.3201 11:62:24
                     7 02.01.4201 01:22:30 02.01.4201 90:40:42
                     8 03.01.4201 00:40:41 03.01.4201 11:62:24
                     9 02.01.7201 11:42:21 02.01.7201 31:71:95
                    10 02.01.9201 01:22:30 02.01.9201 81:41:10
                    11 03.01.9201 00:95:23 03.01.9201 11:11:94
                    12 02.01.A201 01:22:30 02.01.A201 81:41:10
                    13 03.01.A201 00:95:23 03.01.A201 11:62:24
                    14 02.01.E201 11:24:13 02.01.E201 71:50:52
                    15 02.01.I201 01:22:30 02.01.I201 81:41:10
                    16 03.01.I201 00:95:23 03.01.I201 11:62:24
                    17 02.01.R201 01:22:30 02.01.R201 81:41:10
                    18 03.01.R201 00:95:23 03.01.R201 11:62:24
Contents            19
Thanks
Jai

Hi Thahir,
I deleted the SLOG and Restarted the system now its not showing the future date,
Issue resolved.
Thanks ,
Jai

Problem while activating message mapping

Hi all,
I am facing a problem while activating message mapping in IR.It says Object being edited by XXXX and cannot be activated.It's giving my user name itself and even it doesn't allow to go to edit mode even.But I am not opening it twice.How to monitor all the XI users logged into the XI system and find the users using IR and ID objects.Please help in this regard.
Thanks.

Hi Jaya
It is .....
http://<host:port>/rep/support/public/LockAdminService
Hope this helps !!!
Regards,
J Augastine

Can not start Messaging server in Sun Java System Messaging Server 6 2005Q1

Hi all,
I installed Sun Java System Messaging Server 6 2005Q1 from Solaris 10 DVD on Solaris 10.
After the installation, I got directory server, admin server running but messaging server not running. I can not start Messaging server (start smtp, http, pop, imap). I found in directory which I installed messaging server but I could not see script "start-msg" and "stop-msg".
# pwd
/opt/SUNWmsgsr/sbin
# ls
MoveUser ha_ip_config imquotacheck imsdirmig mkbackupdir
UpgradeMsg5toMsg6.pl hashdir imsbackup imsexport readership
configure imexpire imsconnutil imsimport reconstruct
control-params.txt iminitquota imscripter imsrestore relinker
deliver immonitor-access imsdaaci mboxutil useconfig
Any idea what might have gone wrong?
Thanks.

Thanks.
I have a problem when I configure the Messaging Server (by running the /opt/SUNWmsgsr/sbin/configure script):
Hostname mailtest for this machine is not a fully qualified domain name. Please
correct this before attempting to configure Messaging Server. Please make sure
that your DNS is working properly.
<Press ENTER to continue> {"<" goes back, "!" exits}
Can you help me fix this problem?
Thanks.

Problem in receiving messages via RFC Sender Adapter

Hi,
I have problems in receiving messages from SAP backens systems. Sometimes we are getting all messages sometimes not. Strange.
We are transfering report-results via asynchronous RFC calls. To avoid big message sizes we split them up in max. 1000 rows blocks.
Each RFC call on backend side is completed with COMMIT WORK!
We increased the number of connections in the RFC sender adapter. Then it was better, but the problem still exists! Not so often, but sometimes !?!?!
I hope everybody can help me. Thanks a lot!
best regards,
Hannes

hi,
when you don't receive messages what do you see in SM58
on the r3?
any errors over there?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Problem with instant message in clustered environment

Hello, I have some problem with Instant Message service.
We need to use it in our Production Environment (a clustered emvironment with a central instance, two dialog instances and two web dispatchers), some months ago we tested it in Development Environment (not clustered emvironment, just a single system) and it worked fine.
So I did the same configurations on Production Environment but it did not work.
But if I access on my portal (Production Env.) by the central instance (avoiding the dispatchers) the instant message service works.
I think it can be a web dispatcher's configuration problem, in its logs I found the message :
"<i>[Thr 3700] *** ERROR => htmlEncode: called with empty string [icpif.cpp 847]</i>"
I' ve repeated the same configuration done in Dev.Env. (no dispatcher) on the Prod.Env. (with 2 dispatcher), is possible that I'm missing some configurations??
Could someone helps me?
Best Regard
null

Hi Alessandro,
unfortunately I got the same problem but I haven't found the solution yet.
Hoping someone will help us.
Regards Nicola

Problems in output messages for PO.

Hi Experts,
We have a problems with output messages determination, if I have the PO without release approval the system send the output messages ( NEU ) I need that determination doesn't occurs when the po status is unapproved.
For Explo: I create the PO 45...01 with status unapproved, the system generate tehe messages ( NEU ) but doesnt send to destination, the send only happened when i make the realese.
There is a file with more details.
[http://www.easy-share.com/1904410163/POunapproved.doc]
Thanks,
Gustavo

Hi,
In the release strategy,if the indicator changeablity is 1 the system will not allow you to take repeat out put.
Solution is that you have to change the release indicator changeability to 6(SPRO>MM>Purchasing>Purchase order>Define release procedure for purchase order>Release indicator>Changeability).
Another option is that in the message output of the PO in further data change despatch time to 3 and take a repeat out put.
Also check,
SPRO > MM > PO > Release Procedure for PO > Release indicator > Changeability of Purchasing Document During/After Release as 2 for Release ID - G and save
And then Create go to chage mode of PO and repeat the messages
Regards,
Rahul.

SM02 System Messages on Web Clearing Content

We have a custom application that recently moved from ITS to an ICF service with our ECC upgrade. When we post a system message, the next time a user posts to the web page the system message pops up. For example, when this his "Save" to commit their data. This is a good thing.
The problem is when the end user confirms the system message or closes it the web page refreshes and the end user looses all of their data.
Some info about the changes: We're using the SAP Web Dispatcher with HTTPS (ROUTER) as a pass through load balancer (should not be the problem here) and we moved from HTTP to HTTPS for all access so the content is now stateless (this is a big maybe since the user context is still in memory).
Is anyone away of how to handle ICM generated pop-ups without the application refreshing completely?

please check
Note 926124 - SM02: System messages are not displayed
i am not sure abt this note but u can also check
Note 1115177 - SM02: No system messages for new users
Hope this will help you ...
Reagards
dEE

Problem in system messages

Similar Messages

Maybe you are looking for