Problem in Taking a Z Copy

I tried to make a z copy of a prrogram but on executing the z copied program i am getting the error that " STATUS 100 of the user interface z_program name is missing"  and also the application toolbar gets disabled on the output screen.
Please Help
Moderator Message: Put some effort from your end before shooting off questions here.
Edited by: kishan P on Nov 30, 2010 1:26 PM

Hi,
While copying you have missed out the PF Status. Hence the issue.
Regards
Bala

Similar Messages

  • Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

    Hi
    I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
    The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
    This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
    What can I do?
    thank you a lot.

    There is no product called Adobe Acrobat Reader Pro. There is
    - Adobe Acrobat Pro ($$)
    - Adobe Reader (free)
    Which do you have? And are you a programmer?

  • Hi Experts , I am currently facing problems while running restricted version copy .. The log says 0 location products copied and that the process has has timed out. the error message is /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014, th

    Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
    Regards
    Jerel

    Hi, thank you for your replies, I found out few things about my servlet, and its portability
    and i have few questions, although i marked this topic as answered i guess its ok to post
    I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
    of the modified files to the user for them to download the modified files.
    What i am using to get the tempdir i will paste
    File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
    System.out.println(baseurl);
    baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
    baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
    links to the user for download ?
    and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
    And i want to create unique directory for each request made to the servlet , so file names dont clash.
    one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
    Reply A.S.A.P. please..
    Thanks and regards,
    Mihir Pandya

  • Problem with the Finder when copying stuff on a server

    Hi all !
    I have a NAS at home and since a few days, copying stuff on its hard drive has become a pain.
    The hard drives connected to the NAS mount well with no problem, and when I start copying a big file on them, The finder sort of freezes, becomes completely unresponsive.
    The console gives me informations like these :
    25/02/13 20:55:46,479 sandboxd[373]: ([356]) com.apple.qtkits(356) deny system-fsctl 0x7a13
    25/02/13 20:55:46,500 sandboxd[373]: ([356]) com.apple.qtkits(356) deny system-fsctl 0x7a13
    25/02/13 20:55:46,520 sandboxd[373]: ([356]) com.apple.qtkits(356) deny system-fsctl 0x7a13
    25/02/13 20:55:46,541 sandboxd[373]: ([356]) com.apple.qtkits(356) deny system-fsctl 0x7a13
    25/02/13 20:55:46,563 sandboxd[373]: ([356]) com.apple.qtkits(356) deny system-fsctl 0x7a13
    25/02/13 20:55:46,583 sandboxd[373]: ([356]) com.apple.qtkits(356) deny system-fsctl 0x7a13
    25/02/13 20:55:50,330 Locum[377]: Connection with distnoted server was invalidated
    25/02/13 20:55:51,308 com.apple.qtkitserver[356]: Failed to get user access for mount /Volumes/Disque dur
    25/02/13 20:55:51,312 com.apple.qtkitserver[356]: Failed to get user access for mount /Volumes/Disque dur
    25/02/13 20:55:51,316 com.apple.qtkitserver[356]: Failed to get user access for mount /Volumes/Disque dur
    25/02/13 20:55:51,422 sandboxd[373]: ([356]) com.apple.qtkits(356) deny system-fsctl 0x7a13
    25/02/13 20:55:51,442 sandboxd[373]: ([356]) com.apple.qtkits(356) deny system-fsctl 0x7a13
    25/02/13 20:55:51,463 sandboxd[373]: ([356]) com.apple.qtkits(356) deny system-fsctl 0x7a13
    25/02/13 20:56:08,589 Locum[378]: Connection with distnoted server was invalidated
    25/02/13 20:56:12,117 WindowServer[89]: CGXDisableUpdate: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    25/02/13 20:56:14,713 com.apple.usbmuxd[54]: _heartbeat_failed heartbeat detected detach for device 0x3-192.168.0.6:0!
    25/02/13 20:56:26,117 WindowServer[89]: disable_update_likely_unbalanced: UI updates still disabled by application "Finder" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
    25/02/13 20:56:36,000 kernel[0]: utun_ctl_connect: creating interface utun0
    I have reformated the hard drive of the NAS, and its configuration is OK.
    On the mac, I have tried everything : Zapping the PRAM, repair authorisations, except reinstall the system. That i really dont want to have to do at the moment.
    So can anyone help with this ?
    Best regards,
    Phil.

    Exact same situation going on here. 
    Connecting to a NAS (DroboFS).  Started happening a few weeks ago.  I'm looking at a 1.19gb copy right now over a hardwired ethernet connection.  8.4 megs copied so far in 45 minutes. 
    os 10.8.4 Macbook Pro.
    Have tried SMB, AFP, using IP address, aliases, etc.  No noticiable difference.
    Used to be lighting fast, connection looks good, 1000T,... network speed tests look good, have looked at ip problems, everything looks good and nothing on my network changed.
    Only message in the system logs of relevance to the copy are:
    MacBook-Pro.local Locum[466]: Connection with distnoted server was invalidated
    MacBook-Pro.local WebProcess[467]: objc[467]: Object 0x7f9ebbc1c6c0 of class NSUserDefaults autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug

  • Problem While Taking out Printout Through ME9F

    Hi,
    I am facing problem while taking out printout of purchase orderthrough ME9F.
    as if i have to take out the printout of any po i have change the printer to LP02 in messages in me22n.
    In messages i hav output type NEUand in that Logical destination is set to LP01.
    Now can any body tell me how can I Set that output type for printer LP02 So that whenever the New Po is created i Don't have to change it's Logical destination type.

    hi,
    FIrstly check NACE
    THen go to MN05 for setting...
    Steps:
    Maintain the o/p type...
    click on the key combination...
    Can maintain at any of them as per your requirement...
    in the next screen,Then change for single vendor or for range of vendors....enter the necessary data...
    Then in the next window, maintain the vendor, function and partner if any, medium etc...and save it...
    Now from next time it'll give you the this maintained o/p type...
    Regards
    Priyanka.P
    Edited by: Priyanka Paltanwale on Oct 22, 2008 10:04 AM

  • Problems in taking back up

    My client have specific problems in taking back up. I m using 8i. My client wants to delete all the previous records in the database and wants to store it in the CD. Now again he wants to view that old data in the CD, but don't want to download it to his system. how to do that?

    I agree that the easiest option is to start over with Time Machine but then I lose 3 months history
    Not if you set the old TM disk off to the side unplugged and turned off. If in the next couple months you discover you need a file that isn't in the new TM data you can always connect the old and search for it. You don't trust it any longer so it isn't like you're going to reformat it and use it for any other purpose, right?

  • HT201272 Hi, i am facing problem when i try to copy an App from itunes to my iphone 3GS.... when i try to apply changes the process bar complete but apps not copied in my iphone.. plz help

    Hi, i am facing problem when i try to copy an App from itunes to my iphone 3GS.... when i try to apply changes the process bar complete but apps not copied in my iphone.. plz help

    Will the app run on iPhone3GS. Some of the newer apps require IOS 5 or later. This info should be displayed witht the app in itunes store

  • User problem trying to use Control Copy Key

    Hi
    What must be checked for problems when a user try to copy ( ctrl + C ) then paste on Excel and nothing happen??
    I've checked Quick Cut and Paste ( ALT+F12 ), with a user works but not with other ( same PC)
    Thanks in advance.
    Moderator message - The forum is for ABAP questions - post locked
    Edited by: Rob Burbank on Apr 28, 2009 10:46 AM

    Is this an ABAP question??
    Rob

  • Problem while creating a system copy

    Hi guys,
    I've created a copy of my original BW system with the database copy of SQL server procedure:
    1. Copy DB from "old" system and perform "post" activities (SID change, BD54 and after - BDLS -"old" logical sys. Name to "new" one..).
    2. Verify RFC to ECC source system and create new RFC in ECC source system to "new" BW system.
    3. Make BW logical system known to ECC source system (BD54).
    4. RFC names are the same as Logical system names (both BW and ECC sides).
    When I try to restore the source system connection (The original one) on the "new" BW system I get the following message:
    The Connection BA is used in the PRD300YPCC. Source System as a Connection BWPCLNT550 to BW.
    Do You Want to Delete this Connection in the Source System? The Connection is Restored After It Has Been Deleted Successfully.
    If I answer delete - than the source system is working on the new copied BW system. But the original source system on the original BW system will have the same problem I'm having with the copied systems. This means that only one system could be connected to the ECC production on the same time.
    Is there a way to make it work - i.e have both BW systems connected to the same ECC system. We want to have it done so we could upgrade one system and check it against the productive system.
    Thanks alot,
    Tomer Steinberg.

    Still not solved.

  • Problem in taking correct Substitution variable in MDX Formula

    Hi,
    We have MDX Formula which takes Substitution Variable as input . Previously we used Hyperion Essbase 9.3.1.3 version and working fine currently we upgraded to 11.1.1.3 version After Upgrade this formula is not taking correct updated value. Its taking previously updated value . To Take the Correct value we are bouncing the Essbase Services then only new Formula is picking the latest Updated value. This is happening only for one formula and rest everything is working fine. Can you please tell us is there any bug or where is the problem is ?
    Thanks,
    Naresh.

    The Database Administrator's Guide and the Essbase Technical Reference are available through the documentation portal:
    http://download.oracle.com/docs/cd/E17236_01/nav/portal_3.htm
    Both the Database Administrator's Guide and the Technical Reference are searchable on an exact phrase, to find the source of the extract John provided.
    http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_dbag/dotcreat.html#dotcreat1053369
    See section "Setting Substition Variables".

  • Product problem in CRM after system copy

    Hi,
    W made CRM system copy - created test system from production system.
    after this we have problems with replication of sales orders from test R/3 to test CRM.
    Product IDs were not replicated, but the rest of order yes.
    I think this is problem with logical systems on products due to system copy.
    What should I do to correct it?
    run BDLS for all product tables , to change logical system production R/3 to test R/3 ?
    Regards
    Radek

    Hi Radek,
        Check the values for Logical System in COMM_PRODUCT CRM table. If its still pointing to your production system, just run the BDLS again. You need to run BDLS for two times. First one to change CRM Old Logical System to CRM New logical system and second one for ECC Old Logical System to ECC new logical system.
    You need to run two times, because for some products ECC is the source system and for some CRM is source system.
    //Bhanu

  • Problems with the Host command (copying files)

    i am trying to copy a file from one location to another.
    i use the get_file_name function to select the file i want to copy.
    it does not work when in the path, if the directory name has a space in between.(e.g New Folder).The error i get is(the system cannot find the path specified)
    it works fine when a folder name does not have any space(e.g NewFolder).
    y:='o:\documents\filname.doc';
    x := get_file_name(null,null,null,null,open_file,true);
    host('cmd /c start /w copy '|| x ||' '|| y,no_screen);
    any help would be appreciated
    Thanks

    But this is all me, and I do A LOT of scrolling back and forth to cross check facts and so on. Having to constantly switch between files would be a huge pain.
    I guess it's a matter of work styles, but I'd much prefer to switch around among a batch of open chapters with a simple key combination, as opposed to scrolling back and forth through pages in linear fashion.
    How would ID handle a document of this complexity?
    With the limited information you've offered, I'd say I have experience with similar documents, (product catalogs/pricelists), that ID handled just fine, and other cases in which seemingly simple files choked it. I can say the same of Quark. No one can answer your question definitively; there are too many variables. Chances are it's not (only) the size and complexity of your document in itself that are causing your problems. There can be any number of hardware or OS issues contributing, to name a couple.

  • User password problem in RFC after system copy

    HEllo,
    we have a problem in ECC6.0 after system copy (refresh QUAL system by PRD data).
    BEfore doing this copy, we export RFC data (SM59 tables) of our QUAL system and after the refresh we reimport these RFC in our QUAL system. We don't want RFC comming from productive system.
    After this reimport, RFC configuration is ok but we have a problem with RFCuser password. In the password box we have "inconsistent"...
    Have you an idea to reimport succesfully these informations ?
    Thanks
    lionel

    Hello,
    We performed another refresh yesterday. But unfortunatly it was not working. Password are still inconsistent.
    This are exactly way we perform it:
    Before restoring DB :
    export table via R3trans for tables:
    RFCDES, RFCDOC, RFCATTRIB, RFCCHECK, RFCDESSECU, RFCSYSACL, RFCTRUST, RFCCMC, RFCGO, SXRFC, IBSSI_RFCDEST, PARAMVALUE, RSECACTB where ident LIKE '___/RFC%'
    export users via scc8
    Restore DB, truncate upper rfc tables,  import rfc Tables
    Check SM59 => inconsistent
    Migrate Secstore => still inconsistent
    Import Users via transport generated by scc8
    run scc7 as post actions
    Tuncatate/re-import rfc tables
    Check SM59 => inconsistent
    Migrate Secstore => still inconsistent
    What else could be done ?
    We have a lot of RFC. so re-enter all password is really a hudge task ..
    Thanks a lot for help

  • Problem with printing only 1 copy from the console on an HP photosmart 7760.

    When printing 4X6 borderless copies from a memory stick at the console the first picture correctly prints 1 copy but subsequent pictures show they are printing 1 of 2 copies. No matter how I set the number of copies this problem persists.
    I have tried to set the number of copies directly and also to the default setting. Neither works after the first picture.
    Any suggestions?
    **bleep** 

    Hello there! Welcome to the forums @UHBCDDP,
    I read about the printer issue you're having with it randomly printing out pages.
    I am really unsure of what could be causing the problem for sure, however, I have an idea that it could be related to the alignment of the unit itself. The steps I have are below and I'd suggest giving them a try to see if it helps!
    Try the steps from here: A 'Cartridge Problem,' 'Cartridge Failed,' or 'Incompatible Cartridge' Error Message Displays on the...
    I hope that helps! You can also try power resetting the printer and ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
    Press the Power button to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button to turn it on.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
    Thank you for visiting and posting in the community, I hope you have a wonderful day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • ReportViewer 2014 PDF rendering and search problems (glyphs / rectangles when text copied to MS Word)

    I'm using ReportViewer from MSSQL 2014 express in my experiment, use RDLC /local reports/.
    I use slovak char-set (šťďňľřôä) - international chars.
    When rendering to PDF I use HumanReadable PDF + Use font sub-set embedding.
    The report is viewed on the same server as it is generated.
    The generaed PDF prints correctly,
    but some words cannot be found inside PDF /with ctrl+f/ and
    when I copy paste the content to MS Word, those words (it§s chars) that cannot be found are replaced by
    rectangles.
    Any clue why it this so and how to avoid this issue?
    Is there a difference between rendering reports locally /via MSSQL report viewer/ or on the server?
    Thanx.

    Adobe Professional 8.1.2 - similar problem. Word converted to PDF. Three paragraphs separated by a single space line break. When paragraphs are copied (either with or without line formatting) the lines do not appear between the paragraphs in the pasted material (in Outlook or Word). Only way I can find to make them appear is to make each paragraph a numbered list. Then it works. What is going on? I have tried different formatting options in Word.

Maybe you are looking for