Problem in TCODE-SM30

Hi Experts,
I came across a strange problem.
I am going to SM30 and using this view BSPWDV_EHSET_ASG
and making entry inside tht for the enhancement...
i saved it..but i am not able to see the entry inside it...
wht can be the problem..??
Its urgent pls...
Thanks,
SA

Hi Saurabh,
I never faced such an issue. Let me explain this with a scenario.Suppose you want to enhance BP_HEAD component.Your SAP system client is 510.So for this client, you will be having an entry in the view-BSPWDV_EHSET_ASG.Lets say your enhancement set defined in this view is ZTV_INIT. Now go to transaction bsp_wd_cmpwb, enter BP_HEAD in component and ZTV_INIT in Enhancement Set.Click on Display.Then you need to click on enhance component button.It will create a new Z-BSP application which contains all the information of the views you will enhance.Then whatever view you need to enhance, just select->right click->enhance.
Feel free to contact me in case of queries.
Regards,
Rohit

Similar Messages

Performance problem in tcode DSWP

Hi!
I have a performance problem in tcode DSWP, when I try to access some solution by pressing on it:
I can see Determining waring messages from CCMS and it takes a lot of time to access into the solution.
Can some one recommend some solution (perhaps it is possible to deactivate this future)?
Thank you!
regards
Thom

Hi,
Go to RZ20, open alets, close all of them. meaning, there should be one such option.
are you using ccms thru.. agent? then go to rz21, remote agent, make it offline.
Thanks,

Check printing problem in Tcode F110...Urgent

Hi All,
I am getting problem in check printing.
While I am running the Tcode F-58 I am getting check printing exactly in one page.But the problem here is when I am printing the check using Tcode F110 its giving print in 3 or 4 pages.The last page is getting the correct Invoice entry ,but the first three pages are getting prints like VOID**VOID*.
How to delete the first three unwanted pages which contains VOID.
Please let me know abt this issue.
This is an Damm urgent issue.
Thanks in Advance.
Regards,
Sudheer.

Hi,
Well, as it's so urgent.....
This is standard functionality, designed to make sure the cheque paper is correctly linded up in the printer. The number of pages is set in the selection screen of the print program in field 'Number of sample printouts'. Set this to 0 to stop the pages appearing.
Regards,
Nick

Problem in transaction SM30

Hi,
one of my colleagues gets the follwoing message when attempting to access Table/view MASE via SM30:
<b>The maintenance dialog for MASE is incomplete or not defined
Message no. SV037
Diagnosis
The called function with the view/table MASE needs a special maintenance dialog which, however, either does not exist at all, or does not exist completely.
System Response
The called function cannot be performed.
Procedure
Generate the required maintenance dialog.</b>
I have looked at previous threads re. SV037 error and I have tried to solve it myself by generating the required dialog by chosing Generated Objects button (transaction SE54). Then it asks for a function group and when I search for and find 2 possible ones: PEPC and ISSR7_VIEW_CUST_.
No matter which I choose i get the warning "You are changing a function group which does not belong to you" after I click on Find Scr. Numbers button.
Am I on the right track or not?
Sincerely
Ryan

hi
i think problem is in se11 itself/.
creation of table maintenance generator:
go to se11> table name> change> go to utilities> table maintenance generator --> enter authorization group (&NC&) and function group name.
if u dont have fn grp name create it in se80.
specify maintenance type --> single step or two step.
enter screen numbers ..
click on create(pencil icon) .it will ask for package name and request number. enter them and save activate.now mesage will appear maintenance view created without errors..
now u can go to sm30 enter table name u can proceed with new entries now...
reward if useful.

Problem with TCode DSWP

Dear all,
Im facing problem whenever i execute tcode DSWP in SolMan 3.2
Whole system is hang and clearly shown in ST06, CPU utilization is used up to 100% !!!
May i know how to resolve the problem?
Or from what kind of statistic that can give me indication that my server needs upgrade?
Please comment.
Thanks in advance.

Hi Ragu,
My RAM is 3GB. My server only have 2 drive, C and D. Basically D drive is the only drive that containing SAP stuff. The total space for D is 529GB, free space is 264GB.
While for the virtual memory, i notice only 2048MB assign to C drive. But there is NONE for D drive.
Pls comment how should i go about it.
Thanks in advance.

Problems starting tcode from swo1-object via gos (so_sendobj)

Hi,
working with gos around some swo1-object, i got the problem to start a transaction which is called from an object method: the transaction starts but the wished details of that item do not appear as expected.
When I start the test environment within tcode SWO1, and at first, I create an instance from this object giving it the right key (for the wished item) then i succeed in starting the bespoken transaction from within that method showing me the details for that item.
In the last days, I have read and learned a lot about the possibilities and interdependences of the gos mechanism using many of the hints and advices which were given here in the forum in the past. But I'am not able to achieve the wished effect via gos (send object with note) from within our application.
My guess, we need to start an instance of the object before we can show details for the wished item. In the normal case, the application shows at the left windows with containers/trees for search filters and items and within the main window on the right the details for that item. Starting this transaction a popup-window appears (showing the standard filter) where you can give the wished item no.
As I remarked, starting all these things from within the swo1 environment everything is functioning as expected...
Is there anybody who has made a similar experience and can give me some advice what we have to do to succeed in?? Is there any function module of kind SWU..., SWE... SWO... or something else which is to be called in front of that task???
I forgot to mention that within our application, there is the correct? built up of the gos-object via class cl_gos_manager constructing the needed object and the needed key, so when calling the gos-action, the bypassed sap user finds the link in the inbound position and will be directed to the correct transaction with the side effects described before.
Wish you all together a happy new year.
Kind regards
Christian

My freind ,
in the   Bussiness Objects migatration there is no select-options like
sending range of data or the multiple selections.
for this we need separate   loop structure   where in we can send the multiple   data and everytime it calls the BAPI Obect evertime individaully ,
if you want the you have to define one new   BOR object (Custom bapi)...then rignt one function module for   select-options and attach it to you method in the BAPI   .
So that   your BAPI calls in the SAP function Module   for range of data .
Reward points if it is usefull ....
Girish

Problem in Tcode VKOA

Hi guru's,
while i am executing T-code VKOA and selecting table 1. i got a Syntaxerror like.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
caught in
procedure "VIEW_MAINTENANCE" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely "SAPL089C ".
However, program "SAPL089C " does not exist in the library.
Possible reasons:
a) Wrong program name specified in an external PERFORM or
    SUBMIT or, when defining a new transaction, a new
    dialog module or a new function module.
b) Transport error
Right answer will rewarded.
Regards.
ranga

Hi madan,
I cheked that note 107161 and in that i find the solution
like.
With Transaction SE38, you can carry out program RV12A001.
In the selection screen, you select 'Reports and screens'.
The program still contains a syntax error, however this error is automatically corrected when you carry out the program for the first time.
i tried like this and agai i have problem like
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
   caught in
procedure "VIEW_MAINTENANCE" "(FUNCTION)", nor was it propagated by a RAISING
   clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely "SAPL089C ".
However, program "SAPL089C " does not exist in the library.
Possible reasons:
a) Wrong program name specified in an external PERFORM or
     SUBMIT or, when defining a new transaction, a new
     dialog module or a new function module.
b) Transport error
please give the suggetion what i have do those situation.
regards
ranga

Problem with tcode FMCACOV "No valid configuration found"

Hi experts
i'm trying to prove this transaction:
Tcode FMCACOV (program FMCA_COV) "Business Partner Overview"
the system spits out this message:
"No valid configuration found" Message no. FMCA_COV004
can you help me?
thanks!

If this is a new domain, it could take days for all the needed name servers to get all the DNS records they need. However the registration in 2014 would indicate it is not that new http://www.dnsstuff.com/tools#whois|type=domain&&value=southcoaststeel.co.uk
I am guessing your mail provider has an old name server record without an MX record. Although MX record support for the domain is fairly spotty see http://www.dnsstuff.com/tools#ispCacheLookup|type=domain&&value=southcoaststeel.co.uk&&recordType=MX
They have an MX now, although the domain setup does appear to have other issues like no A record. see http://www.dnsstuff.com/tools#dnsReport|type=domain&&value=southcoaststeel.co.uk

Problem with TCODE PK02 with the warehouse number field.

Hello folks,
I have created a control cycle in the TCODE PK01. When I tried to change it it is not displaying the warehouse number that I have used while saving. Also here it is showing the warehouse number as a mandatory field.
I have input the warehouse number in the PK02 TCODE and saved. I am able to see the warehouse number value updated in the table also. But again if I try to enter the PK02 TCODE , it is displaying empty warehouse number and showing as a mandatory field.
Also in TCODE PK03 tcode , I am not able to see the warehouse number field I have saved.
Can anyone address on the below issues?:
1. how to configure the PK02 warehouse number mandatory field settings and
2. Populating the warehouse number field in the PK02 and PK03.
Thanks,
Ramineni.
<< Moderator message - You have a better chance of getting answers to a question if you flag your thread as a question rather than removing the flag. >>
Edited by: Rob Burbank on Jun 14, 2011 9:57 AM

Hi,
I do not see warehouse number field in contorl cycle defination..
what type of control cycle is this? Classic or event driven?
Looks like this is a Z screen field..
check if user exit is impliemented properly.
Thanks,
Santosh Sarda

Problem with Tcode: PT91_ATT : SAP-HR Standard to Zprogram

Hello Experts,
I have created the zreport from attendance in HR-payroll ( Tcode: PT91_ATT ). Actually I have copy the whole satandard report code (with Tcode: PT91_ATT ) to my zreport for the customized requirement. Also we have to add in selection parameter like : Projects and some more things, but I am unable to sort out such selection parameters where I should have to add in the program itself. Plz suggest where I have to make editing in program itself, If possible do suggest with program-code.
Regards,
Akg

Hi.,
I think i xplained clearly., k. first goto se38 enter RPMENUSTART00 and click on copy., copy every thing to zprogram say, ZRPMENUSTART00.
now enter RPTABS60 (which contains code for data declarations and selection screen and events) and click on copy., copy all including includes., to ZRPTABS60. now modify ZRPTABS60., according to ur requirement.
and in ur ZRPMENUSTART00 instead of SUBMIT (g_reportname) VIA SELECTION-SCREEN USING SELECTION-SET g_stvar. at line 33 u can directly give ZRPTABS60., or do like this., g_reportname = ZRPTABS60.
hope this helps u.,
Thanks & Regards
Kiran

Problem in tcode QA12

Hi,
I am working on user exit and i am facing a problem that when i run the code for my include it allows to displays the data when it is saved but when it comes to the close of it a run time error is displayed that
screen does not found.
I am using the enhancement :-
QEVA0005 -> User subscreen for displaying add. data for usage decision
In this there is Function Exit and Screen Exit.
When it comes to the screen exit it gives runtime error,plzz provide
me guidelines what to do with the screen exit which is giving the run time error?
Edited by: ricx .s on Sep 19, 2008 12:10 PM

i think you are using wrong exit
can u tell me in steps like where u need to click and where u need field
so that i can tell u in accurate
with regards
s.janagar

Long path of tcode SM30

Hi,
Does anyone know what's the long path for the transaction code SM30? (Maintain Table Views)
Long path - using the menus instead of entering a transaction code
Thanks!

Hi,
SE43==> SPOO==> Tools==> Tables==> Table Maintance.
Rgds,
TM

Problem with TMG - SM30

Hello Experts,
When I maintain a ZTABLE using SM30. I am not able to see all fields on the maintan screen.
How can I display all fields of Ztable in SM30 maintan Screen?
I have maximum of 10 fields. No displying 4 fields only. among these 2 are Key fields.
Please suggest.
Thank you,
Mohammed.
Edited by: Mohammed Jaleel on May 16, 2008 5:54 AM

Hi,
If you have added all the fields at a time then remove the table maintenance generator and create one more.
if you create 4 fields first and created table maintenance generator, then adjust the table structure by going to SE14 and then adjust the table and come back to SE11 and then
remove the table maintenance generator and create one more.
Reward points if helpful.
Thanks and Regards,
Narayana

Add varient in tcode sm30

Hi expert:
How to add varient in sm30? pls show me step by step, many tks!

Hello,
simplest is to use fm VIEW_MAINTENANCE_CALL and fill table DBA_SELLIST
-> have a look here: Re: manipulating table maintenance dialog
Also You can define any number of view variants for an existing view. The view variants do not have their own generated maintenance dialogs, they use the base view. The view variants can differ from their base view by different selection conditions and a different field selection.
Also, Please go to these links...
http://help.sap.com/saphelp_47x200/helpdata/en/a7/5134f9407a11d1893b0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a6/03883acb00d768e10000000a114084/frameset.htm
If these links helped you, please reward points to me.
Thanks and Regards
Vasanth

MRP run problem in TCode-MD01

hi experts,
There were some MRP controllers were assigned for User exit in SPRO for planning run (T code :- MD01 ). Now i have defined additional MRP controllers and also assigned them for user exit (in SPRO) for planning run.
With old MRP controllers defined as user exits , Planning run is considering materials with only particular MRP controller.
But for these newly defined MRP controllers , user exit is not restricting planning of materials with only particular MRP controller and materials planning is carried out for all materials with newly defined MRP controllers.
please help me out
thanks in advance
rgds.
jai

The name of the extension where you can find the user exit is M61X0001
You have to read the code to find out why it is not working for the new controllers.
Probably the code is not that dynamic as you thought and the controllers are hardcoded ...

Problem in TCODE-SM30

Similar Messages

Maybe you are looking for