Problem in Technical System Creation Wizard in Portal SLD

Hi
When I am trying to Create New Technical System for WEB AS ABAP, I am getting the following error at the Installed Production phase
in the Portal SLD
*CIM_ERR_FAILED: Unable to execute createInstance() request, exclusive write mode is enabled*
Please help
Regards
Soumya Dasgupta

HI ,
Thank you for spend your valuable time for my problem
But my main problem is, when i am going to http://hostname:portno/sld page,
all those are not in active mode. i mean when i am selecting any function it showing sld is not configured. please do sld configuration. sld and nwdi related users are also not there in user administration. I cant understand why sld is not configured.
coz sld is configured if , we select web as java component in installation time . i dont know web as java component is selected or not. but when i am going to http://hostname:portno/ irj/portal, it showing user , content , system administration tabs . and every thing is working fine.
IN case if i did not select web as java component in installation time, may be portal also should not be configured. But here i am able to access portal. but in case of sld , it is showing error message. what is hell with sld realted problem. Please give reply.
reply will highly appreciated. Thank you.

Similar Messages

Technical system creation problem in SLD

hi
while i'm traying to create a technical system for Web As ABAP(ERP 2004 ECC 5.0) in SLD when I serch for Installed product no product with ECC 5.0 is found.
is there somthing missing ?
regards,
kinjal

HI kinjal
i think UR J2EE server patch level is SP9.
do u read the SLD configuration document carefully?
look at sap note 669669. and import the CR Content according to that. this solves ur issue.
regards,
kaushal

Technical system creation in SLD

Hi,
1. I have installed Netweaver sneak preview-java edition.
2. I am trying to create a new technical system for WebAS ABAP. We are on ECC 5.0 .
3. I have imported Cimsap.zip and content.zip successfully.
4. Now in the screen "Technical system wizard-software products and components" under "Available products" section i am not finding an entry fo ECC5.0. Here what system name should i select to proceed further.
Do i need to make any entry in host and services files, or anything else i have to do?
Regards,
Kumar.

You will probably achieve the same result if you were to use SAP R/3 4.7 Try using it instead, see if it works. I think that it will.
Regards,
Rich Heilman

Problem exporting technical systems to QA

Hi SDN,
I have a problem when i try to export the technical systems to QA enviroment , the download link is not working and the screen show an red icon without message error , somebody knows what's happening??, i'm using PI 7.0 nw04's
regards

Hi,
most often technical systems are created per landscape
via transaction
have a look at my weblog:
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
so you don't have to transport them
Regards,
michal

Significansce of Installed Products while Technical System creation

hi gurus,
could you tell me what exactly Products mean while we creating Technical systems in System Landscape Directory?
What if we wrongly specified any product? (i.e. for a NetWeaver2004s if we select some other product what will be the effect?
thanks in advance,
nikhil

Hi Nikhil,
Mentioning not exactly same software components description in SLD does not have a adverse effect, however please refrain from this practice since SLD serves as a central info storage and could be misleading for your team.
regards, Shantanu

AS JAVA technical system not updated/registered in SLD

Hi,
We have setup the SLD bridge connection from our SLD with 7.0 SAP J2EE
server which is our local SLD to SLD with 6.40 SAP J2EE server which is the master or central SLD. Actually we have this set up, that we have configured a local SLD for our Netweaver 2004s SR2 or Netweaver 7.0 system and connect it to the central SLD which is also a Netweaver system but of lower release, Netweaver 2004 SR1.
Since Netweaver contains both ABAP and Java, I can see that our WAS ABAP technical system (of the SLD 7.0) was
succesfully registered and updated on the central SLD 6.40 but I cannot
register or update the WAS JAVA technical system (of the SLD 7.0) in the central SLD 6.40, but it can be updated in our local SLD which is then connected to the central SLD as mentioned.
Since my update for the WAS ABAP was already working and its updated
in the central SLD 6.40, what can we do to achieve the same result for the WAS
JAVA? Because if it works with WAS ABAP, what is wrong then with WAS JAVA? What might be the cause or some other configurations to be made?
Also can we synchronize the CIM updated with all the SLD? We want to
see if we can just update the CIM content of SLD 6.40 and pushed this
with the other SLD on the system e.g. SLD of 7.0.

Hi,
I think you should certain configurations for your system to be listed under SAp Java systems.
1.Go to visual admin,c:\usr\sap\SID\JCxx\j2ee\admin
run go.bat.
Then go to services-----SLD Data supplier.
go to Http settins under that,enter the details of central SLD you want to connect,
hostname,http port,sld admin user and password.save it.
go to CIM client settings,enter the same details there and save.
Then check CIM client generation test.it should be sucessfull.
then trigger SLD data transfer at the top left corner.
it also should be sucessfull.
Then your system will be listed.
2.may be you have to create a role called Lcr administrator with all Lcr* actions assigned to it.
then this Lcr administrator role should be assigned to ur administrator user.
hope this works.........
reward points if helpful............

Technical System Not reporting to Master SLD

Hi
We have multiple SLDs in our landscape for each landscape. We have a Central SLD in our Solutiion Manager systems. All the SLDs are configured to transfer the data to the master SLD through the Data Bride which reports everyday.
One of the SLD reports only ABAP systems to the master SLD. I dont see any java systems reporting to the master SLD from. The other SLDs reports both ABAP and JAVA systems well. SO I am wondering what could be the reaon for not reporting only Java systems that to onlyfrom one SLD system.
Mahesh Shetty

Hi Mahesh,
There is a lil difference. For a double stack target system, on the ABAP side, we maintain SLD connection details in RZ70, SLDAPICUST and RFCs LCRSAPRFC and SAPSLDAPI. Likewise, in Java side of the target system, the SLD Data Supplier entry in Visual admin needs to be maintained too. This will ensure the correct functioning of SLD for both ABAP and Java stack.
Once the above configurations are maintained correctly, in SLD-> Technical systems-> dropdown WEB AS ABAP will have the ABAP entry and WEB AS java dropdown will have the Java entries.
Rgds,
Soujanya

Autmated creation of Technical system

Hi Experts,
                  I am experiencing a strange phenomenon. In my PI dev server, I hav manually integrated BI dev server and R/3 server. There is no other server apart from these in the landscape.
    But everyday morning I get to see that the Technical system for teh BI production server along with all its clients being created sometime in the 3 am in the morning. I really don understand why is this happening. There is no RFC connection with the BI prod server,, no kind of connnection done taht i can remember.
    I am concerned as only 2 of us hav access to SLD , I wonder how is this Technical System getting created..
Regards,
Arnab.

Hi,
either you have a common SLD for PI dev and prod systems, so your BI prod technical system is appearing in your SLD...........
but if you have local SLDs for dev and prd systems, then i guess that may be you have made a SLD bridge between your dev and prd systems to automatically synch the SLDs of these systems.
Regards,
Rajeev Gupta

Technical System of Web AS ABAP

hi all,
i have following doubts when creating technical system of web as ABAP type.
1)when creating techincal system it is asking me for
' Message Port (sapmsXXX): '. what should i enter for this field and wheredo i get the details from. by default it is taking 3600 is it ok if i go ahead with 3600.
2) logical system name .it appears it is optional but should i fill this entry as well.
3) After creating the technical system. do i need to fill TMS Domain and TMS Transport Group Name. if yes how do i need to fill and and what is the use of this field.
can some one suggest me a blog for Technical System creation for web as abap type.
thanks,
raj

Hi,
you can do it automatically
check out my weblog:
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
or you can find how to do it
(in more details) in my book too:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

SLD Configuration to New Technical System is failed.

When iam trying to create a new technical system in sld after selecting the product i got this error.Please help me on this iam new to Portal SLD.
CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_InstalledProduct.CollectionID="24457af4-fdf7-e5f4-63ac-00f98079457a",ProductIdentifyingNumber="01200615320900001296",ProductName="SAP ERP",ProductVendor="sap.com",ProductVersion="2005",SystemID="STV.SystemNumber.0020620473.SystemHome.stravist"

Hi,
As per the error - the technical system already exists in the SLD. You could check in the list of existing technical systems if system STV already exists. If you want, use the same entry or else delete it first and try registering the system.
Also, why are you recreating the system manually now? Was there a restore, system copy or any other activity?
Manually creating the is not recommended. Auto register the system to SLD via RZ70 for ABAP or SLD Data supplier in Visual Admin for Java systems.
Regards,
Srikishan

How PI uses technical system information in SLD

Hi Experts,
I know there are business system and technical system registered and associated in SLD.
Especially for those SAP systems, in our normal PI scenario, how PI uses the technical information which was registered under Technical System in SLD since we need again configure the host/port and credentials details in the sender/receiver channel in ID.
Or SLD is just one central place for collecting all the technical information together only for life cycle management?
There is nothing more to do with the Tech System (SLD), PI only needs the business system in scenario.
Please knidly share your opnion, thanks in advance.
Best Regards,

Hi Aditya,
Let me provide an example to describe the need fot technical systems.
Think of an outbound scenario : SAP ECC/CRM -> PI -> Third Party (ex: SOAP)
Now just think how PI will identify what the sender is (ECC/CRM or 3rd party) if the TS is not registered in SLD? The Business Systems are logical systems whcih points to Technical Systems (application systems that are installed in system landscape). TS hold the information about the actual systems, its host, IP, clients etc.
Now based on the source BS which points to TS, the target binding is done in Receiver Determination pipeline step. Now if there is no TS attached to the BS how can PI identify whether ECC or CRM is sending the data and hence will not be able to identify the relevant target for the source.
Think of Business Systems as sitting on top of Technical Systems, and when the landsape details are not known for third party systems we use Business Component/Business Service.
Cheers,
Souvik

Creating technical system Web As java

Hi All
I am creating a new technical system Web As Java in SLD.Can anybody please tell what "Installed Products" I need to select to create the system
Regards
Pawan

Hi
If ur creating a new Web AS Java technical system...I hope u would have already defined the corresponding software components and the product for that particular system...U should add this product which was created.
Hope i got it right..Do let me know if u have further queries
Regards
Krishna

Problem in creating a JDBC System on VC7.1 portal ( CE7.1 SP3)

I have a problem in creating a JDBC System on VC7.1 portal (CE7.1 SP3)
I get the following error:
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Could you please let me know if there are any guides on SAP Library; I was not able to find any documentation nor any threads discussing this on VC7.1
Although, I saw this thread Can Visual Composer talk to/connect to any Database?..
which says that VC7.1 can connect to SAP backend
and web services only, and there is no direct connection to the db.
Help needed please.

Hi Dharmi
Here is a quote of Dafna's post in [another thread in this forum|Re: Copy VC controls]
CE7.1.1 will be released at September 2008 for ramp-up customers.
There are many improvements and new capabilities in the new release of Visual Composer for CE7.1.1. Among the new features you can find:
The missing features from Visual Composer 7.0 (Html view, portal Eventing support (EPCM), JDBC, Undo/Redo, and more..)
Many layout & modeling improvements
Additional ALV table functionality - export to Excel, switch to chart, configure ALV behavior at design time
Integration of Visual Composer in Eclipse - additional entry point to the Visual Composer models from the NWDS. This integration provides the option to add a WD component (in case of missing functionality in Visual Composer), as a black box component to the Visual Composer model. Right-clicking the component will open the Web Dynpro perspective for creating/modifying the component.
Regards,
Shai

SLD - Error in creation of technical system

hi experts,
when we go to create a new technical system type WEB AS ABAP, the system said 'system already exists'
it exist other technical system for this system of type third party,
don't is it possible have together?
very thanks,

Hi,
The problem is due to whatever technical system your are trying to create those details are already contain another technical system name in SLD. We can't create more then one technical system with same parameters. Better to use existing technical system or delete existing one create new one.

System Creation problem in EP

Hi All,
I am trying to create a system to connect my portal to the R/3 backend to execute business package.
All the entries goes well like system name,system alias,ITS nae etc.
When I click the personalize link to map my user id for the sytem created it is throwing the following error :-
There is a configuration issue which leads to problems when accessing user mapping data for the selected backend system <system name>. Contact your system administrator.
I am doing it on EP6.0 on SP14.Am I missing something.The same error comes for every user.
Also I did the same thing in Sneak preview version it was working fine and i was able to connect to the R/3 backend.
Also when I go to Useradministration -> User mappping I am not finding any default systems under Logon data drop down.I am wondering why?
Expecting an early response.
Regards,
Balaji S

Hi Balaji,
goto system administration -> system configuration -> UM configuration -> Direct Editing
and find the following
ume.usermapping.unsecure=FALSE
change it to
ume.usermapping.unsecure=TRUE
save changes and restart portal server
then u can use UM after creating System do not forgot to assign the permission for System to Everyone group
regards,
kaushal

Problem in Technical System Creation Wizard in Portal SLD

Similar Messages

Maybe you are looking for