Problem in test lab

Hi everyone,
Just describe what i faced with.
I solved to create CCR Exchange 2007 in my test lab, and faced with if i try to install these roles of exchange:
cas1 - cas/hub
mbx1, mbx2 - CCR MBXes
i got unwork configuration.
Test users cannot send an email to himself, and inboud emails stuck in "Queue" "CAS1\Unreachable\XXX".
But if i install all roles to cas1 and then create the cluster and migrate (or recreate mailboxes) all works find.
Unfortunatelly i cannot to solve that issue myself, i undesrtand that problem maybe in "routing group" or so on, but please show me right way if you know it. Thanks!

Hi
Are you running exchange 2007 with 2003 or 2010?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
I am sorry, yes i use 2007 SP3 version.

Similar Messages

Problem while testing a ABAP Web Service

Hello,
I'm facing a problem while testing a webservice for the BAPI BUPA_CENTRAL_GET_DETAIL. I have opened the Web Service Home page, and I get no error. I fill in the input values and then when I send the request, I get back an error which says "Authority check failed"
Urgent help needed..
Thanx,
Anupama

you need s_service and s_object authorization objects in your role.
its explained in this document
section 3.1 on page 7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/92d80512-0a01-0010-32a3-cd3735bd9275
Regards
Raja

Equipment for building test lab

Hello all,
I'm looking for a little input on the two options I'm weighing for building my virtual test lab. If at all possible, I would rather not have my daily PC running my virtual lab, but I leave that option open. I'm thinking of purchasing a Dell PowerEdge 2950 II
(from ebay), installing Windows Server 2008 R2, installing VM VirtualBox so that I can set up an Active Directory environment to prepare me for the MCITP exams. This option would allow me to conserve the resources of my daily PC. If I were to use my daily
PC (I7 quad, 3GB RAM, 80GB SSD, and 1TB storage with only 200GB of free space) I would more than likely have increase RAM and buy another HDD to store the VMs. How much more trouble would it be to go the PowerEdge 2950 II route?
Thanks.

Hi,
We recommend that you review the Windows Catalog to identify servers that are qualified for use with Hyper-V. You can identify systems that support the x64 architecture and
Hyper-V by searching the Windows Server catalog. Personal advice is you’d better to buy the 2950III
it’s the newer product.
More information:
Requirements and Limits for Virtual Machines and Hyper-V in Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/ee405267(WS.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

UCCX 8.0 in test Lab

Hello Folks,
I'm going to install UCCX 8.0 in a test lab and I'm wondering what hardware other are using?
I'm presuming that it needs ESXi4.0? Do you have to use the full production specification of 2 x vCPU and 4GB RAM? Or can you cut down the resources like you can for Call Manager in VMware?
All advice greatfully received!
LH

Hello fella,
Things are going pretty well at the moment. How about yourself?
I've not seen Daz for a little while now. He's still over at Azzuri though!
I've had a shot at installing UCCX into VMware Server 1.x and ESXi 3.5, but it keeps spitting out "The hardware you are using is not supported for this product". I've had a shot at opening the ISO to have a look at what version of VMware it's expecting, but all of the HWXXXX files in \Cisco\vendor seem to be blank and just show "NULL" or blank when I open them. Maybe that's why my hardware isn't supported if the file is knackered!
Did you do anything special and do you know if those files are ok on your copy of UCCX?
Hope you're not working too hard ;-)
LH

Is it possible to Publish Exchange 2010 behind TMG in Test Lab

Hi
I have Three Server 1 Domain 2 Exchange 2010 and TMG 2010 installed. All of these server installed on the virtual machine.
This is a test Lab. I trying to Publish OWA behind the TMG Internally. Is it possible? if yes how ?
I installed 2 NIC on TMG.

Yes.
See http://www.microsoft.com/en-us/download/details.aspx?id=8946 for instructions.
Hth, Anders Janson Enfo Zipper

Facing problem in testing of EBS

I am facing problem in testing of EBS
User has raised an issue that, they want to change the description of House bank account ID.I changed the account ID in the T>code FI12, but my problem that how can I show them the test cases it is required in my client process is that whenever we changed some thing we need to give test case for the same.
While raising the issue they have mentioned that they getting the wring description in EBS
I have tried in FEBA but i dont how to test and i dont even have existed bank statement in Development
Thanks in Advance

You can show the name change in the following transactions.
1. FCHN
2. FCHI
3. FF67
4. FF68
As the data is not available for you you can proceed ahead as suggested above or ask the clients to copy the data from Prioduction or Quality environment to test system to show the test case.

Port problem when testing bsps (sso)

Hi Forum,
I am facing a problem when testing bsps or wd4a.
When testing an app, first of all the sicf service "myssocntl" gets called. This service listens under port 50077. But when testing the bsp app port 57700 gets called.
Any ideas, where I can customize these ports?
Thank you!

hi,
check your instace profile and chage the icm/server_port_0 value u can change.
thanks
ajai

TS3274 After upgrading to 5.1, I can not hear other's calling tone during the usage of Skype-to-Skype. But after touching the answer key, I still can hear other's sound. If I use earphone, the calling tone is audible. No problem of test call. What's goin

After upgrading my iPad 1 to OS 5.1, I got trouble to use Skype. I can not hear the calling tone from other during the usage of Skype-to-Skype. But when I touch the answer key, I still can hear other's voice and other also can hear my voice. If I use earphone, the calling tone from other is audible. There is also no problem of test call. What's going on with my iPad 1? I do hope someone can help me to fix this problem.

Hi,
I experienced similar behavior (neither Keychain Access nor Safari would start, Chrome cannot access https sites, etc.). It got fixed by following instructions in this article:
http://www.macworld.com/article/163227/2011/10/fix_a_lion_file_opening_hang_in_m ac_os_x_10_7_2.html which I found in this thread: http://att.macrumors.com/showthread.php?p=13625027#post13625027
Basically remove the ~/Library/Application Support/Ubiquity and restart. OSX will create a new one with the right permisions.
/cheers

Customizing email subject line in Test Lab

Hi All,
First ques:
I am wondering for system site administration access do we need an advanced license or enterprise dedicated license will aslo provide us access to use system site.
Second Question:
While sending an email from test lab using the email icon, it is showing default subject line can we customize this default subject. Also, how can we customize the format of email.
Thanks,
PS

Hello, and Welcome to the HP Support Community!
I have absolutely no idea what you are asking about, or which HP device you have...
How to Ask the Very Best Question and Get Results.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

After successful execution from test lab,status is showing as not completed

We need you help in resolving an ALM Issue.
After successful execution from test lab the Automatic Runner popup shows as the test execution status as "Passed" ,But after closing the Automatic Runner popup window the Tesl lab execution status is not updated and it shows as "not completed". Can you please look into this issue and provide the resolution...
We Would appreciate for your valuable support.
Before closing the Automatic Runner popup,Runner popupStatus:.
After closing the Automatic Runner popup window the Tesl lab execution status:

The issue was related to Note 959209

TEST LAB Guide: Demonstrating Certificate Key-based Renewal from Kurt Hudson updated 24 june 2013

Hi all,
We have been working since a full week building and rebuilding on different platforms this test lab and we have encountered a lot of different errors. (3 platforms are running)
One of our test lab went nearly up to the last point but we have been unable to get rid of the error : access denied by the remote end point when we test the certificate web enrolment. This error seems well known but not the solution and the reason why.
On two other similar Test labs we had errors with certificate invalid while asking the certificate Internet Server while it was the same as the one which was working above! This was strange as we used the clone of the certificate working on the previous
lab.
the other third error was below.....
We are sure that some of you have been able to get rid of these kind of errors so as to have a final lab running properly to be able to build POC on client's premises.
Kind regards
Gerard Dumazet
[email protected]
gd

Hi all
We have rebuilt a fourth TLG without using PowerShell and with only the GUI. Everything is working now.....
If anyone as an idea why, he will be welcome! It's not encouraging for using the scripts!
Gerard Dumazet
gd

VMware test lab tasks?

http://www.virtualizationadmin.comis a good place to start. The site has a lot of great information on your virtualization needs. Even has step by step instruction how to setup your first virtual machine.Check out the link below for info on VMware ESXi 5.5 with Ubuntu:http://www.virtualizationadmin.com/articles-tutorials/vmware-esx-and-vsphere-articles/installation-a...

Hey everybody, I'm new to virtualization and my boss got me set up on a test lab. He had me install it and then install Ubuntu. He's been pretty busy so getting new tasks has been tough. I'm sure I've seen some posts about this but can't find them. Looking for some ideas to get me started on learning this system and virtualization. I'm running VMware ESXi 5.5. If you know of another thread just point in the right direction, otherwise shoot me some ideas. Thanks in advance.
This topic first appeared in the Spiceworks Community

SCCM 2012 Test Lab Setup Questions...

Hi all,
I'm trying to set up a SCCM test lab with VMs so I can test deployment of our software package (.msi). I downloaded the System Center 2012: Configuration Manager Test Lab Guide, which appears to consist of the following required machine setups...
-One server running System Center 2012 Configuration Manager named CM1. CM1 uses the Windows Server 2008 R2 SP1 Enterprise Edition operating system.
-One pre-existing server running SQL Server 2008 R2 Enterprise named APP1. APP1 uses the Windows Server 2008 R2 SP1 Enterprise Edition operating system.
-One pre-existing client running on Windows 7 Ultimate Edition named CLIENT1.
From this document, the first step is to Complete the Base Configuration. When I download that document, it lists the following needed systems...
One computer running Windows Server 2008 R2 Enterprise Edition named
DC1 that is configured as an intranet domain controller, Domain Name System (DNS) server, Dynamic Host Configuration Protocol (DHCP) server, and an enterprise root certification authority
(CA).
One intranet member server running Windows Server 2008 R2 Enterprise Edition named
APP1 that is configured as a general application and web server with secure sockets layer (SSL) support. APP1 also hosts the certificate revocation list (CRL) for the enterprise root CA
installed on DC1.
One roaming member client computer running Windows 7 Enterprise or Ultimate named
CLIENT1.
One intranet member server running Windows Server 2008 R2 Enterprise Edition named EDGE1 that is configured as an Internet edge server.
One standalone server running Windows Server 2008 R2 Enterprise Edition named
INET1 that is configured as an Internet DNS server, web server, and DHCP server.
The Base Configuration test lab consists of two subnets that simulate the following:
The Internet, referred to as the Internet subnet (131.107.0.0/24).
An intranet, referred to as the Corpnet subnet (10.0.0.0/24), separated from the Internet subnet by EDGE1.
My question(s)... How many separate VMs are required to set up the test lab, 7? Or are APP1 & CLIENT1 the same system for both setup guides, which I guess would bring the total of needed systems/vms to 5?
Can any of the images serve a dual purpose to lessen the number needed even further?
Any information would be greatly appreciated!
THANKS IN ADVANCE!!

There's no correct answer here as ConfigMgr itself can run on a single server or its roles can be spread out to many different servers. Ultimately, in a pure lab, there is rarely a reason to use more than a single server unless you are trying to simulate
a production deployment where the roles have been separated.
This single server doesn't include a DC though (as the ConfigMgr site server must be a member of an AD domain) or a client to manage though so that brings the total up to 3. You technically could put the ConfigMgr site server on the DC; however, that
is rarely done in production and cause a few unique configuration issues. You could also treat the DC as your managed client but that's typically not a great use case for testing client management.
I have no idea what lab guide you are following, but remember the lab guide is set up to walk you through many different scenarios -- some of which you many not care about. ConfigMgr is a huge and complex application that can be installed in many, many different
configurations based upon the goals of the installation and the organization it supports so it ultimately depends upon exactly what you are after. I'd suggested doing some additional supplemental reading like TechNet and/or one of the publishes books
available instead of just blindly following the lab guide. That's not to say the lab guide doesn't have value, but if you want to follow it, then you need to follow it.
Jason | http://blog.configmgrftw.com | @jasonsandys

Howto setup a simple network in SCVMM 2012 R2 and HyperV for test-Lab /Private Cloud

Howto setup a simple network in SCVMM 2012 R2 and HyperV for test-Lab /Private Cloud
I have domain controller on my laptop (i5 core 8gb) en one hyperV machine running also scvmm 2012 r2 on it. (i3 core 16gb)
both runung windows server 2012 r2 x64 on it.
I want to install a easy "Test Lab" for Scvmm 2012 r2 and hyper-V r2 for mine Private cloud exams. (70-246 & 70-247).
howto arrange networking and clustering for this mine network and cluster is 192.168.1.0/24.
ThanX anyway!!

Also, I have tried to redeploy other test VM networks, VMs, and the PA Network itself and it still doesn't work.
Any ideas?

Where To Download Base Configuration ISO(s) For Test Labs?

Hi.
Is there somewhere that I can download an ISO for the base configuration for the Test Labs outlined here:
http://social.technet.microsoft.com/wiki/contents/articles/1262.test-lab-guides.aspx#Base_Configuration_TLG
Or is it presumed that the reader of the Test Lab Guides will configure each machine themselves? If so, why is this not communicated clearly in the Test Lab guides?

Hi,
Test Lab Guides is to let you use less to learn a new technology, product or an entire multi-tier solution, TLG provides you with step-by-step instructions to create the Base Configuration test lab. You could build test labs based on other
TLGs from Microsoft and published in the TechNet Wiki, perform TLG extensions, or create a test lab of your own design that can include Microsoft or non-Microsoft products.
For more frequently asked questions about Microsoft TLG:
http://social.technet.microsoft.com/wiki/contents/articles/2477.test-lab-guides-faq.aspx
Regards,
Rebecca Tu
TechNet Community Support

Problem in test lab

Similar Messages

Maybe you are looking for