Problem in the creation of rfc function module

hi,
I am creating one rfc function module comparing to standard non-rfc function module. In that one i have one export parameter with the standard strcture type. but this stcture component contains with strcture type. among all these components four fields are common. but when i am trying to activate function module it is giving message you cannot use internal tables, strings,references, or strctures as components. that function module name is BAL_FILTER_CREATE and that export parameter name is that export parameter name is E_S_LOG_FILTER that associated type is BAL_S_LFIL. how can i solve the problem. pls give me solution as soon as possible.

hi,
for rfc fm's u should enable the call by value check box which will appear on that of import and export parameters. tick that one for each parameter in rfc and activate.
if helpful reward some points.
with regards,
Suresh Aluri.

Similar Messages

Passing the structure to rfc function module

hi,
iam having a rfc function module which is importing structure.
i have to pass only one field value to that structure.
how can i pass that field value to that structure.
it is very urgent.
thanks in advance

Hi..
You have to Declare the ACTUAL PARAMETER (workarea) with the Same Structure as that of the FORMAL PARAMETER.
but you can fill only the FIELD that you want pass in the workarea and pass it to the RFC.
<b>Reward if helpful.</b>

How to take back the control from RFC function module to calling program

Hi,
In our system landscape, more than 200 child systems are connected to Solution manager(SMP). I have copied a RFC enabled function module into all the child systems and calling that FM from Sol Man in sychronous mode.
Here goes my code in SolMan.
LOOP AT it_dest INTO wa_dest.
CALL FUNCTION 'Z_GET_LOGIN_DETAILS' DESTINATION wa_dest-rfcdest
    EXPORTING
      date_fr               = s_date-low
      date_to               = s_date-high
    TABLES
      tab_data              = it_val
    EXCEPTIONS
      communication_failure = 1
      system_failure        = 2
      OTHERS                = 3.
IF sy-subrc EQ 0.
*     Updates zuserlogon
      MODIFY zt_logon_det FROM TABLE it_val.
      COMMIT WORK.
      WRITE:/'RFC for Destination', wa_dest-rfcdest, 'succesfully updated.'.
ELSE.
      WRITE:/'RFC for Destination', wa_dest-rfcdest, ' failed.'.
ENDIF.
ENDLOOP.
Few child systems are very slow & takes more than 20 minutes(Many of the times system hangs) to return the result. But I should not wait for so long. Even if the child system doesn't return any values in 5 minutes I shoud continue with other system ignoring the current one.
I tried calling the FM in asynchronous mode(STARTING NEW TASK) but no success because only 6 DIA processes possible but as I said I have more than 200 systems connected to SolMan.
Please help me resolving this problem.
Thanks,
Prathap

If there are only few child systems with bad response time, use asynchronous call using a CALL FUNCTION func STARTING NEW TASK task DESTINATION dest PERFORMING subr or CALLING meth ON END OF TASK. Count asynchronous calls still running/waiting (increment a counter when creating a task (not the one used for task id). In the form/method performed at end of a call decrement the counter. When counter is lower than a limit, 4-5 if 6 processes (*), perform an asynchronous call else perform a synchronous call or wait until the counter falls below the limit.
Regards,
Raymond
(*) Use SPBT_INITIALIZE at start of program to get actual number of free/available processes.

Creation of RFC function module

Hi experts,
        My requirement is, an XML file is coming from non sap to middleware in XML format. Middleware converts it into sap format and it will access the RFC, i.e., BAPI, which will be created by me and updates the same in CRM.
       There is one mapping sheet given, ie., from source format to destination format.Now the point is, for creation of BAPI, what should be taken as parameters, ie import, export   etc., Can I take the destination fields as importing and table parameters? Please suggest
Rgds,
Gsaasg.

Hi,
If I understand your requirement correctly, you want how the mapping file will be used to decide the import and export parameters of your BAPI.
Though we should have a look at the mapping sheet, but it is more useful to the middleware person. The middleware person will use them to create a mapping on their side. Once teh data from legacy will be received by them, those data will be mapped to respective SAP format. This format will be shared to them by you.
Let them know of your import parameter details, and what data you expect in each field. This will help them map the data correctly.
We should create the standard ABAP structure as per the data coming in XML, and should be used as the import parameter.
For ex:
if the XML file is:
<ContactInfo>
       <address>
           <city>XYZ</city>
           <postcode>ABCDEF</postcode>
        </address>
         <Number>
               <type>Mobile</type>
               <No>0123456789</No>
          </Number>
</ContactInfo>
then we have to create a structure as ZCONTACTINFO, with two components ADDRESS and NUMBER.
ADDRESS will be of structure ZADDRESS with two components CITY and POSTALCODE.
NUMBER should be of a table type with line type containing TYPE and NO. (as Number node can contain multiple entries..one for mobile, one for home, one for office)
And this CONTACTINFO will be the IMPORT parameter in your RFC FM.
In your case, no export parameter is to be maintained. Only thing is that we should understand the XML well.
Hope this clarifies your case.
Regards,
Susanta

Problem while calling an RFC Function Module in Background

Hello,
I have created a RFC function module for reading data from an external DB system. The FM calls an external RFC program (coded in C++ using RFC SDK), which delivers the required data. This external program is maintainged as an TCP RFC Connection in SM59.
Further I have created a report, that calls the RFC function module to get the data from the external RFC programm.
My problem is, when I call the report in foreground, everything works OK, the RFC connection works and data can be read from the external program.
However, when I schedule the report to run in background as a job, the report is stating in the protocoll that there was a problem calling the defined RFC connection (although the connection is working properly at that time).
More funny is, this particular problem with running in background occurs only in the productive system, in test and development system the report works correctly also while running as a job in background.
Can you suggest the solution to this problem? Could it be something with authorisations or server settings?
I will be on holiday for the next 6 weeks, so take your time to answer .
Regards,
Dusan.
Edited by: Julius Bussche on Jan 22, 2009 7:19 PM
Please read the forum rules about u r g e n t ...

This is an external RFC server program, not a remote enabled ABAP RFC function module as the others seem to be assuming, right?
Is it possible that your DEV and QAS systems only have one application server, but the PROD has many and dedicated one(s) for processing low priority background jobs?
It might be that the target server of your TCP connection is not this BTC instance, and your RFC server is returning the data "locally" - so, into nirvana...
Just guessing, but might be worth checking.
Cheers,
Julius

Problem with RFC function module from R/3 to CRM

Hi, i have a RFC function module created in R/3, this is the code:
function Z_CRM_PRODUCTO_INTERLOCUTOR.
""Interfase local
*" IMPORTING
*"     VALUE(GV_VKORG) TYPE VKORG
*"     VALUE(GV_VTWEG) TYPE VTWEG
*"     VALUE(GV_MATNR) TYPE MATNR
*"     VALUE(GV_KUNNR) TYPE KUNNR_V
*" EXPORTING
*"     VALUE(GV_KDMAT) TYPE MATNR_KU
*"     VALUE(GV_POSTX) TYPE KDPTX
*" EXCEPTIONS
*"      NOT_FOUND
UNPACK GV_MATNR TO GV_MATNR.
UNPACK GV_KUNNR TO GV_KUNNR.
select single KDMAT POSTX
          into (GV_KDMAT, GV_POSTX) from KNMT
          where   VKORG = GV_VKORG
                  and VTWEG = GV_VTWEG
                  and KUNNR = GV_KUNNR
                  and MATNR = GV_MATNR.
IF sy-subrc <> 0.
    RAISE NOT_FOUND.
ENDIF.
endfunction.
When i call this function from CRM, i do it like this:
CALL FUNCTION 'Z_CRM_PRODUCTO_INTERLOCUTOR'
DESTINATION LV_RFCDEST
EXPORTING
    GV_VKORG = lv_vkorg
    GV_VTWEG = ORGMAN_H-DIS_CHANNEL
    GV_MATNR = ORDERADM_I_WRK-ORDERED_PROD
    GV_KUNNR = WA_DATOS_PER-N_PAGADOR
IMPORTING
    GV_POSTX = IT_POS_LINE-DESCRIPCION
    GV_KDMAT = IT_POS_LINE-material
EXCEPTIONS
    not_found = 1.
where:
it_pos_line-descripcion type string
it_pos_line-material type string.
Well, my problem is that when debugging, in R/3 the 2 return values have the correct value, but when they are passed to CRM they have only one position.
As i've been told, it was working ok, but it's being wrong since we made a ¿conversion to unicode?. Maybe I should change the type of return ???
Thanks in advance !!!

Hello Maria,
Make sure you define your parameters in CRM exactly the same way as in R3, do not use type string here.
So:
it_pos_line-descripcion type C char 40,
it_pos_line-material type C length 35.
Kind regards,
John.

RFC function module always creating BPs with the same user name (RFC user )

Hi All
I posted the below question in a different area before. But thought it would be more suitable here.
Moderators - Please let me know if am doing any mistake.
Question:
I have a RFC function module in CRM that creates Business Partners in ECC (XD01 tcode).
I am using a dialog RFC destination configured in SM59 in CRM.
But my RFC function module in CRM is always creating the Business Partners in ECC with the RFC user id (the user that we maintain for the RFC destination in SM59).
This is a problem for the users because they are not able to track the actual person responsible for creating these Business Partners.
Can somebody please let me know how to solve this problem?
Thanks
Raj

Hi.
You may use the trust relationship between CRM and R/3 and in SM59 instead of set a specific username, you set the flag "current user".
With this flag, the system will access R/3 system with the user logged in CRM system. The Trust relationship must be created between CRM and R/3 in order to the system doesn't ask for a password to login in R/3.
If you need more details please reply.
Kind regards,
Susana Messias

Collection problem with RFC function module WSDL.

Hi.
I have developed an RFC function module in a SAP system version 4.7 (WAS 620). This FM has 2 table parameters. I have no problem when I see the WSDL in the SAP Web Service Browser.
Another team is trying to consume this RFC FM as a web service from a Java application but they say they can't see the table parameters as collections.
Here is the WSDL of the FM, the table parameters are T_MOVIM and T_ERROR:
<?xml version="1.0" encoding="UTF-8" ?>
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:s0="urn:sap-com:document:sap:rfc:functions" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="urn:sap-com:document:sap:rfc:functions">
     <types>
          <xsd:schema targetNamespace="urn:sap-com:document:sap:rfc:functions">
               <xsd:element name="ZMMFUSAPTK_0001">
                    <xsd:complexType>
                         <xsd:all>
                              <xsd:element name="GENIDOC" minOccurs="0">
                                   <xsd:simpleType>
                                        <xsd:restriction base="xsd:string">
                                             <xsd:maxLength value="1" />
                                        </xsd:restriction>
                                   </xsd:simpleType>
                              </xsd:element>
                              <xsd:element name="T_ERROR">
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0012" />
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                              <xsd:element name="T_MOVIM">
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0011" />
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                         </xsd:all>
                    </xsd:complexType>
               </xsd:element>
               <xsd:element name="ZMMFUSAPTK_0001.Response">
                    <xsd:complexType>
                         <xsd:all>
                              <xsd:element name="CODRET">
                                   <xsd:simpleType>
                                        <xsd:restriction base="xsd:string">
                                             <xsd:maxLength value="1" />
                                        </xsd:restriction>
                                   </xsd:simpleType>
                              </xsd:element>
                              <xsd:element name="T_ERROR">
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0012" />
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                              <xsd:element name="T_MOVIM">
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0011" />
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                         </xsd:all>
                    </xsd:complexType>
               </xsd:element>
               <xsd:complexType name="ZMMTASAPTK_0011">
                    <xsd:sequence>
                         <xsd:element name="REFERENCIA" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="10" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="FECHACONT" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="8" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="FECHADOC" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="8" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CODMOV" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="2" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="NROPLAN" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="12" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="NROCOMP" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="10" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CLASEMOV" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="3" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CENTRO" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="4" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="ALMACEN" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="4" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="MATERIAL" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="5" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="LOTE" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="10" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CANTIDAD" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="15" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="MOTIVOMOV" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="4" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CENTROREC" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="4" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="ALMACENREC" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="4" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CENTROCTO" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="10" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="ORDEN" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="12" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="TIPOSTK" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="1" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="NROPEDIDO" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="10" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CODCISTERNA" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="50" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="ZMMTASAPTK_0012">
                    <xsd:sequence>
                         <xsd:element name="REFERENCIA" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="10" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CODERR" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="3" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="MSJERR" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="100" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                    </xsd:sequence>
               </xsd:complexType>
          </xsd:schema>
     </types>
     <message name="ZMMFUSAPTK_0001Input">
          <part name="parameters" element="s0:ZMMFUSAPTK_0001" />
     </message>
     <message name="ZMMFUSAPTK_0001Output">
          <part name="parameters" element="s0:ZMMFUSAPTK_0001.Response" />
     </message>
     <portType name="ZMMFUSAPTK_0001PortType">
          <operation name="ZMMFUSAPTK_0001">
               <input message="s0:ZMMFUSAPTK_0001Input" />
               <output message="s0:ZMMFUSAPTK_0001Output" />
          </operation>
     </portType>
     <binding name="ZMMFUSAPTK_0001Binding" type="s0:ZMMFUSAPTK_0001PortType">
          <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
          <operation name="ZMMFUSAPTK_0001">
               <soap:operation soapAction="http://www.sap.com/ZMMFUSAPTK_0001" />
               <input>
                    <soap:body use="literal" />
               </input>
               <output>
                    <soap:body use="literal" />
               </output>
          </operation>
     </binding>
     <service name="ZMMFUSAPTK_0001Service">
          <documentation>SAP Service ZMMFUSAPTK_0001 via SOAP</documentation>
          <port name="ZMMFUSAPTK_0001PortType" binding="s0:ZMMFUSAPTK_0001Binding">
               <soap:address location="http://dbades00.bue.bemberg.com.ar:8002/sap/bc/soap/rfc" />
          </port>
     </service>
</definitions>
Should I change something in the definition of the parameters of the FM? or the problem is with the parsing process on the other system?
Thanks in advance.
Fabian.

Welcome to SDN.
I am not sure about this particular issue, but i have used WSDL from WAS6.20 system in MS Office infopath to consume webservice where we have had table parameters without any issue.
may be try with office infopath to make sure that the problem is with the WSDL or with the java application.
Regards
Raja

Problem while importing RFC function module in XI. Please Help!

Hi Experts,
           When I try to import RFC function module in XI I get the following error:
             **Ready for import**
Import started...
YCOP_VALIDATE_GR:
+ com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: connection closed without message (CM_NO_DATA_RECEIVED)
Import failed with 1 error
Any idea why is this error? How to resolve this?
Thanks
Gopal

Hi
   The problem still persists.
   This is what I have done:
    1. My FM is RFC enabled. In the "Attribute" tab of the FM I have selected "Remote-enabled module" and "Start immed".
2.Activated and tested the FM.
3.Released the FM. In se37, Function Module -> Release ->Release.
4.Tried to import this FM in XI under "RFC". Get the same error.
I have some questions:
1. After releasing the FM do I have to activate it?
2. In release there is "Internal Release" Do I have to use that?
3.Do I have to do "Internal Release" first then "Release"?
4.The FM i am trying to import makes a call to another FM. Both the FMs are in the same system. Both are remote enabled. The second FM updates data in custom table. the first FM which I am importing validates the data and then calls the second FM for update. Do I have to import both FMs?
Please help me!
Thanks
Gopal

I need to create RFC function module which creates the IDOC

Hi-
Any idea how to create RFC function module which creates the outbound IDOC. If you have any sample code please forward to me.
Thanks,
Sony

My Problem is
Whenever they create Invoice using T-code's like FV65(Parked Document), automatically should create IDOC's...
I have used message type FIDCC1 but this message type is usefull only for Posting documents.
1. Whenever they create parked document, entries will be stored in BKPF(Parked Document-Filed-BKPF-BSTAT = 'V') and Bseg....
2. I have to read entries from those tables and should create IDOC...
3. I checked FM's(FI_IDOC_CREATE_FIDCC1, FI_IDOC_PREPARE) but are not useful...
4. Now I need to write one RFC function module and that FM should create the IDOC's....
Can anyone please help me out?
Thanks,
Sony

Rfc functional module problem

hi
am created a rfc functional module program(se37) which receives the two input value from calling program and just add and it returns to the calling program(se38).
the program is executed successfully but the probs is the rfc functional module does not print it executable contents. the calling program does print its executable contents.
PLZ RESOLVE THIS PROBLEM
see the calling program and rfc functional module below
REPORT YSUSEX51.
PARAMETERS : I1 TYPE I ,
I2 TYPE I,
DEST1 LIKE RFCDES-RFCDEST DEFAULT 'NONE'.
DATA: RESULT TYPE I,
SYSTEMID TYPE SY-SYSID.
CALL FUNCTION 'Y_RFCMODULE' DESTINATION DEST1
EXPORTING
A = I1
B = I2
IMPORTING
C = RESULT
SYS = SYSTEMID
EXCEPTIONS
INVALID_DATA = 1
COMMUNICATION_ FAILURE = 2
SYSTEM_FAILURE = 3.
CASE SY-SUBRC.
WHEN 1.
WRITE: / 'NO DATA AVAIL'.
EXIT.
WHEN 2.
WRITE:/ 'CONNECTION COULD NOT BE ESTABLISHED'.
WHEN 3.
WRITE : / 'SYSTEM NOT AVAIL'.
EXIT.
ENDCASE.
WRITE:/ 'INSIDE THE CALLING MACHINE'.
WRITE: / RESULT.
WRITE: / SYSTEMID COLOR 7.
IN THE RFC FUNCTIONAL MODULE IT DOES NOT PRINT THE A ,B,C AND SYS VALUE,
FUNCTION Y_RFCMODULE.
""Local Interface:
*" IMPORTING
*" VALUE(A) TYPE I
*" VALUE(B) TYPE I
*" EXPORTING
*" VALUE(C) TYPE I
*" VALUE(SYS) LIKE SY-SYSID
*" EXCEPTIONS
*" INVALID_DATA
WRITE: /'INSIDE THE REMOTE SYSTEM'.
WRITE: / A.
WRITE: / B.
C = A + B.
SYS = SY-SYSID.
WRITE:/ C.
WRITE: / SYS COLOR 7.
ENDFUNCTION.
REGARDS
surender

Hi
Instead Of giving write statement inside a function module
write these statement where this rfc is called.
if rfc connection is established ,then
number will be printed.
otherwise not.
Dont forget to reward points
Edited by: neetu chhabra on Mar 10, 2008 12:14 PM

Where should i call the rfc function module? in xi or in r/3

where should i call the rfc function module?
for the synch scenario: file < -- > xi <---> rfc
i know the type of rfc is tcp/ip; but i'm not sure with the followings,
and with some trials i can not even see any message via rwb even all the setting
can be activated without errors.
where should i create the rfc destination? in r/3 or xi
where should i call the rfc via abap program? in r/3 or xi
i guess the calling program should belong to the different server with the rfc itself....
so confused....
Thanks for your reply!!
Jun

if i create the destination in xi point to r/3, then i call the rfc use the destination in r/3 right ?
The call doesnt use the destination in R3. XI has the RFC destination which is just used to connect to the R3 system
but where i need to create the fm via se37? in xi or r/3 ?
In R3
Regards,
Prateek

Facing Problem with RFC Function Module

Hi,
I have created an RFC function module to get some data in table format.
I have run the RFC in original system: It is giving the data.
However, when I run this in target system, It is not giving any values.
Could you please let me know, why it happens? I am not sure where I missed out.
Thanks,
Sandeep

HI,
i hope you are calling the RFC function module in the target system like this
CALL FUNCTION <FUNC NAME> DESTINATION <DESTINATION NAME> . The destination should be logical system name of the source Logical system .
Regards,
Nagaraj

What are the steps we have to follow to develop RFC function module

hi
what are the steps we have to follow to develop RFC function module

I will tell you simple example within r/3 systems..
source system - A (SAP R/3 )
Destination System B (SAP R/3).
First create RFC Destination in SM59 - in A System.
Createing RFC Destination - GOTO SM59 Transaction and click R/3 System .
it will go second screen and give ur RFC Name ,IP Address and log on details.
click on test concetion and remote logon.
now create RFC Function module in B System.
goto se37 - create fm with starting with Z* or Y*.
maintain all data like
attribute should be remote enabled
importing is v_matnr
exporting is v_maktx.
write the simple code - select single maktx from makt into v_maktx
where matnr = v_matnr.
Call this fm in report program in se38 in B sytem and copy the FM.
paste this code A System
use ur logic and destination 'RFC Name'.
Reward Points if it is helpful
Thanks
Seshu
Message was edited by:
Seshu Maramreddy

Delta Problem while extracting the data by using function module

Hi Experts,
I have extracted the data by using Function module, for delta loads I have given Calday and additive delta in Generic delta settings, in BW side I have initialized the data after that I have given delta update option in infopackage and I made process chain also, every day process chain is running successfully but it is showing zero records, but there is a data in Data source (RSA3), means delta is not working.
What is the problem,
Is there any another settings for delta loads,
Please help me to do this,
Helpful answer will be appreciated with points,
Regards,
Venkat

Hi,
Try this delta type :NEW STATUS FOR CHANGED RECORDS.
More information from Nagesh, this information may help
1. New status for changed Records.
2. Additive delta.
New status for changed records means
New Order
order no quantity
1000 10
order changed to quntity 8. then 2 records will posted 2 BW in first case.
1000 -10
1000 8
if you come to Additve delta.
for the same case it will send the same record as
1000 10
changed records
1000 -2
this is the difference. New status with changed records should be used only in association with ODS not cube becoz we don't have overwrite option.
Additive delta we can use for ODS and Cubes with update mode Addition.
Regards,
Satya

Problem in the creation of rfc function module

Similar Messages

Maybe you are looking for