Problem in the HP 510 printer

I have a problem in the HP 510 printer when printing a file showing double

Hello, is this issue when you are trying to ePrint or is this when attempting a standard print job?
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Similar Messages

Adobe Reader Order Number: AD011597276. I am having problem installing the CreatePDF Desktop Printer

Adobe Reader Order Number: AD011597276. I am having problem installing the CreatePDF Desktop Printer.

The CreatePDF Desktop Printer has been retired. Please see https://forums.adobe.com/docs/DOC-5131 for more information.

Is anyone having problems with the new Xerox printer driver update from Apple? My 8700S is no longer working with QuarkXPress.

I allowed a System Update that included a Xerox Printer update. I am running a MacPro 10.6.8 with Quark 8.5.1 and a Xerox ColorQube 8700S. EVERY was working perfectly before the "update" but afterwards anything sent to the printer from Quark would stall the printer. I went to the Xerox website and downloaded their Printer Driver and tried again. Now I could print from Quark but I can NOT get to the printer window to change the type of paper, etc. So, the problem still persists.
Should I try going into Time Machine and trying to find the Xerox Print Driver in the Library folder?
Should I upgrade the whole system software? (I wouldn't mind doing that AFTER I get this magazine off to the commerical printer)
Should I upgrade to Quark 9?
Any help here would be apprciated.
Thanks - Rob

As a general rule of thumb, I never install updates until I read its info and I am having problems with my current software. I hide the updates until I need them. Usually this happens when I update or upgrade my os. I don't fix what ain't broken is my golden rule.
It is possible that you need to update or upgrade Quark in order for your newer printer driver to work. First I would try the following....
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
If your printer does not work afterwards, update or upgrade Quark. If that does not work, contact the printer manufacturer.

Permission problem while the install of printer's driver

Guys,
when i'm installing the driver (lpr and cupswrapper) of my brother, happening a thing.
Report the error:
[black@arch bin]$ sudo dpkg -i --force-all dcpj315wlpr-1.1.3-1.i386.debdpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
(Reading database ... 30 files and directories currently installed.)
Preparing to replace dcpj315wlpr 1.1.3-1 (using dcpj315wlpr-1.1.3-1.i386.deb) ...
Unpacking replacement dcpj315wlpr ...
Setting up dcpj315wlpr (1.1.3-1) ...
chown: invalid user: 'lp'
How can i fix this last string: chown: invalid user: 'lp' ?
I tried: sudo groupadd -f lp and also to edit with chown the permissions of file and of the folder.
With no results.
Some is able to help me, please?
Thanks.

Hi,
Do
more /etc/group | grep `whoami`
If there's no line with 'lp' you have to add your user to the lp group, you can do
usermod -aG lp `whoami`
and you should have the answer on the wiki https://wiki.archlinux.org/index.php/Cups
Last edited by lekaf974 (2012-07-17 21:55:59)

Mr Magoo has problems with the small font print in the "Everything Mac" man

Well thanks to a one year no payments offer by my local Future Shop i purchased the iMac 3.0.6GHz.
However the "Everything Mac" manual and other enclosed printed documents are printed in extremely small fonts.
Is there a download site for a pdf version which may allow me to print or view the instructions in larger print.
Lordy, SteveJobs must have extremely good vision.

If you find a PDF copy such as this http://manuals.makeuseof.com.s3.amazonaws.com/the-mac-manual.pdf - open that in Safari and zoom to your heart's delight.
As well, go to System Preferences/Universal Access and see if any options there help out.
And finally, if you also have the new Magic Mouse, simply hold down on the Control Key on your keyboard and 'scroll' with one finger fore/aft on the mouse top to zoom with ease.
Good luck and any case and enjoy your new Mac.
Just a note....be sure that manual is current with the OS version on your new computer - things have changed in many ways and if you're learning, you should learn in sync, etc.

Problem with the KDE add printer wizard ...

First, I installed: cups, foomatic-db, foomatic-db-ppd, foomatic-db-engine, foomatic-filters, ghostscript, hplip and gimp-print
Using the KDE wizard I can locate a samba printer in a Win2k computer (using login: DOMAINUSER) and can select the maker (HP) and model (Laserjet 4 Plus) and my choices are:
HP LaserJet 4 Plus v2013.111 Postscript (recommended)[English] -> repeated 5 times
HP LaserJet 4 Plus (Foomatic + Postscript)[recommended]
HP LaserJet 4 Plus (Foomatic + gimp-print)
HP LaserJet 4 Plus (Foomatic + gutenprint)
HP LaserJet 4 Plus (Foomatic + lj4dith)
HP LaserJet 4 Plus (Foomatic + ljet4)
I remember that in Kubuntu breezy the recommended didn't work and the Foomatic + ljet4 worked pretty well. But now I am getting the following error dialog:
Unable to load the requested driver:
Unable to create the Foomatic driver [HP-LaserJet_4_Plus,ljet4]. Either that driver does not exist, or you don't have the required permissions to perform that operation.
I am running the wizard as root as I clicked the "Administrator Mode" button. Any driver option generates the error. This is at work. At home I have an Okidata Okipage 8z in parallel port (also worked in 'K'breezy). I'm using kernel26 and the parallel port drivers are automatic loaded. The same error appears.
Any hints? It smells like I'm not configuring something.
Cheers.
Júlio Maranhão

when installing my printer i run into issues using kde control center also
i go about it in here
http://localhost:631/
heres the arch wiki page for installing printet with cups
http://wiki.archlinux.org/index.php/CUPS_Setup
hope this helps

Problem using the PDF Printer driver in LC ES 8.2

Hi all,
I have a problem making the PDF Generator Printer driver work. I am able to print a document, and it is successfully converted to pdf, but the send email service fails. The error message is:
2008-08-27 15:22:21,671 INFO [com.adobe.ipp.pdfgclient.ResponseGenerator] ALC-PDG-006-017-Refetched the email configuration details from provider.email_sendmail_service after 5 minutes.
2008-08-27 15:22:21,671 INFO [STDOUT] java.lang.Exception: 40002
2008-08-27 15:22:21,671 INFO [STDOUT] at com.adobe.ipp.pdfgclient.EmailSender.send(EmailSender.java:135)
2008-08-27 15:22:21,671 INFO [STDOUT] at com.adobe.ipp.pdfgclient.ResponseGenerator.sendmail(ResponseGenerator.java:154)
2008-08-27 15:22:21,671 INFO [STDOUT] at com.adobe.ipp.pdfgclient.ResponseGenerator.sendResponse(ResponseGenerator.java:95)
2008-08-27 15:22:21,671 INFO [STDOUT] at com.adobe.ipp.pdfgclient.JobIdPoller.run(JobIdPoller.java:94)
2008-08-27 15:22:21,671 INFO [STDOUT] at java.util.TimerThread.mainLoop(Timer.java:512)
2008-08-27 15:22:21,671 INFO [STDOUT] at java.util.TimerThread.run(Timer.java:462)
I tried with two different mail servers, with same result. I have configured both EmailService: 1.0 and SendEmailService: 1.0 . Has anyone encountered this error before?

Hi,
I have configured provider.email_sendmail_service: 1.0 service according to our mail server. And also I have configured print driver on client with a user which is synchronized with our directory. But I cant receive the converted pdf as email; I get the following:
2008-11-24 18:01:15,171 INFO [com.adobe.ipp.pdfgclient.PsToPDF] ALC-PDG-001-000-Submitted : review.txt - Notepad IPPJob ID cf3bb155c0a8021c0000000013f1c773
2008-11-24 18:01:15,203 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-000-
Job ID for the submitted createPDF job =ipp.ps251ac9-4cb1e5-412c5b-9ec173-b0cd7e-2e7462
2008-11-24 18:01:15,234 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-024-ipp.ps: Time Job Submitted: 11/24/08 6:01 PM
2008-11-24 18:01:15,234 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-016-ipp.ps: Job Type: Convert to PDF
2008-11-24 18:01:15,234 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-017-ipp.ps: Job Submitted by User: oguzatak
2008-11-24 18:01:15,421 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-008-Begin PS/EPS/PRN to PDF Conversion
2008-11-24 18:01:15,828 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-009-END PS/EPS/PRN to PDF Conversion
2008-11-24 18:01:15,828 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-027-ipp.ps: Job Completion Status: Succeeded
2008-11-24 18:01:15,828 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-025-ipp.ps: Time Job Completed: 11/24/08 6:01 PM
2008-11-24 18:01:15,828 INFO [com.adobe.pdfg.DistillerImpl] ALC-PDG-001-026-ipp.ps: Time of Job Execution: 625 ms
2008-11-24 18:01:16,328 INFO [com.adobe.ipp.pdfgclient.ResponseGenerator] ALC-PDG-006-017-Refetched the email configuration details from provider.email_sendmail_service after 5 minutes.
2008-11-24 18:01:16,515 INFO [com.adobe.ipp.pdfgclient.EmailSender] EmailSender error : 550 The address is not valid.
2008-11-24 18:01:16,515 INFO [STDOUT] java.lang.Exception: 550 The address is not valid.
2008-11-24 18:01:16,515 INFO [STDOUT] at com.adobe.ipp.pdfgclient.EmailSender.send(EmailSender.java:247)
2008-11-24 18:01:16,515 INFO [STDOUT] at com.adobe.ipp.pdfgclient.ResponseGenerator.sendmail(ResponseGenerator.java:154)
2008-11-24 18:01:16,515 INFO [STDOUT] at com.adobe.ipp.pdfgclient.ResponseGenerator.sendResponse(ResponseGenerator.java:95)
2008-11-24 18:01:16,515 INFO [STDOUT] at com.adobe.ipp.pdfgclient.JobIdPoller.run(JobIdPoller.java:94)
2008-11-24 18:01:16,515 INFO [STDOUT] at java.util.TimerThread.mainLoop(Timer.java:512)
2008-11-24 18:01:16,515 INFO [STDOUT] at java.util.TimerThread.run(Timer.java:462)
I have double checked the users credential for smtp user.

I have a problem with the pen in my mag/cyan print head. I have tried cleaning it, and replacing it

I have an HP ML7850 all-in-one model. The display reads "There is a problem with the mag/cyan print head." The HP solution center said I needed to replace the print head. I did, but the problem still exists. I went through the online self-diagnostic testing, and the results are that there is a problem with the pen. I tried to gently clean the pens, but it did not help. Any suggestions?

On D5460, it now prints with a cyan tint over whole picture.

Problems with color matching when printing...

Hi, I work for a small family business in the P.O.P. industry. We currently have myself and one other designer, we both take illustrator files that have come from the graphic design firm that we contract with and get them ready to print on our Vutek QS3200. However ever since acquiring the printer we have begun to run into problems with the colors when printing. When the files are exported off of my computer, I use either .tif or .pdf files, they print as they should, the colors seem to match the proof and everything goes smoothly. However when the other designer exports a file, he tends to do mainly pdfs, the colors tend to be extremely different from where we want them. Also we will get very strange results, such as yesterday he kept getting a faint yellow 1/2" border around his prints. After I believe 3+ hours of him trying, I was given the original CD and instructed to try. After 15-20 minutes of making the changes that we needed to make (adding a new price point) and ripping, mine printed perfectly.
We both use Macs, both have CS3 Design standard, only differences between the computers are mine is newer and a bit faster, and I'm running OS 10.5.6 and he has 10.4. He has also at some point loaded various color profiles, whereas my CS package is just whatever the default is when I loaded it. When we were being trained he grabbed the color profile off of the Colorburst RIP server and loaded onto his computer, plus I believe he has a couple for freelancing purposes on there as well. My thought is that these profiles are somehow corrupting the files that are going through that computer, but I honestly am lost with it at the moment. He believes the problem lies within the fact that he does not have the newer OS, I honestly cannot see that as having any effect on this at all. I was wondering if anyone has run into any similar problems, or if anyone might have any advice on this issue? I would really like to be able to solve this, as I was hired to do mainly structural design for the P.O.P. and I'm having to put in a lot of overtime to get my work done along with the additional work that I'm having to do.
Thanks for your time

I've got a few years experience calibrating large format printers. First, the Yellow sounds like a file problem. I used to work with two workstations, one PC ( RIP station ), and one Mac ( file prep station ). I tend to agree with you in that the OS is probably not the problem. But, any Colorburst profiles should remain in the RIP, not in the originator application. My workflow consisted of creating EPS files that were based on established color settings in their given applications ( i.e., Illustrator, Photoshop ) which were interpreted by the RIP which had it's own calibrated profile ( perhaps more than one based on how many different substrates were being used ). Your partner may be complicating things by incorporating a RIP profile prematurely. If there are deviations big enough to be noticed, there has to be something in the application color settings that is causing some type of corruption. This could lead back to the operating system, but I would think it lies somewhere in Bridge or the application color settings. Start there. You should seriously consider implementing a calibration system if you do not have one already. Another slight possibility is the driver's ability to interpret files coming out of Leopard vs. files coming out of Tiger. It may benefit you both to be in the same operating system dynamics, using the same driver versions and RIP profiles. At the very least, match everything that is currently working successfully and put them on both machines. If there is still a noticeable problem in color matching, then something is seriously wrong and you should call in a prepress profiling expert. Hope this helps.

Has anyone had problems with the latest driver update for the Lexmark printers? My Lexmark printers won't work with the latest driver update.

Has anyone had problems with the latest Lexmark printer driver update? My Lexmark printers won't work with the latest driver update. If I reinstall an older version of the drivers, they work.

Mine crashed once with new update, but working fine.
I had to delete old printer, restart iMac, and then reinstall
new drivers to get it to work. Would not complete without
the restart after deleting non-working printer. No problems
since and all features working.

How to install the HP Designjet 510 42in Printer driver in the W2008 R2 print cluster?

How to install the HP Designjet 510 42in Printer driver in the W2008 R2 print cluster?

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

T.code FBL5N: a problem with the print of the output list

Hi All,
with reference to the t.code FBL5N, I have a problem with the print of the output list of the report.
When I execute the print, I obtain one customer for each page printed.
I wonder if is possible to obtain more customers for each page printed.
Could anyone help me?
Thanks
Gandalf
Edited by: Umberto Gandalf on Dec 21, 2008 10:36 PM

Hi,
Though personally i havent tried this option, check the same
Go to Menu: Settings >> Switch List
This will make the value displayed in ALV format and then try taking print outs.
Regards,
Sridevi

Problem with the garbage record getting printed at the beginning

Hello Friends,
I know that this problem is very difficult to solve without looking at my script and its program. But I will try asking anyways.
I have written the following code (Driver program) which uses to tables ZRAMCUSTMAST AND ZRAMCALLMAST.
ZRAMCUSTMAST has customer details like address etc.,
ZRAMCALLMAST has the call details that each
             customer has done.
But when I print the details, it prints everything correctly but for each customer it prints some garbage
values as the first row.
Any feedback will be greatly appreciated. You can mail me the response also (singer_ram AT yahoo DOT com)
CODE in my driver program (SE38) -
*& Report ZRAMPROJSCRIPT                                              *
REPORT zramprojscript                          .
TABLES : zramcustmast, zramjuncmast, zramcallmast.
DATA : itabcustmast LIKE zramcustmast OCCURS 1 WITH HEADER LINE,
       itabjuncmast LIKE zramjuncmast OCCURS 1 WITH HEADER LINE,
       itabcallmast LIKE zramcallmast OCCURS 1 WITH HEADER LINE.
DATA: type_of_call(1),
      CALL_CHARGE type i, CALL_CHARGE_STRING(5), TOTAL_CHARGE type i,
      hour(2), min(2), sec(2).
SELECT * FROM zramcustmast INTO TABLE itabcustmast.
*SELECT * FROM zramjuncmast INTO TABLE itabjuncmast.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION                       = 'TX'
ARCHIVE_INDEX                     =
ARCHIVE_PARAMS                    =
DEVICE                            = 'PRINTER'
dialog                            = 'X'
   form                              = 'ZRAMPROJSCRIPT'
   language                          = sy-langu
OPTIONS                           =
MAIL_SENDER                       =
MAIL_RECIPIENT                    =
MAIL_APPL_OBJECT                  =
RAW_DATA_INTERFACE                = '*'
IMPORTING
LANGUAGE                          =
NEW_ARCHIVE_PARAMS                =
RESULT                            =
EXCEPTIONS
CANCELED                          = 1
DEVICE                            = 2
FORM                              = 3
OPTIONS                           = 4
UNCLOSED                          = 5
MAIL_OPTIONS                      = 6
ARCHIVE_ERROR                     = 7
INVALID_FAX_NUMBER                = 8
MORE_PARAMS_NEEDED_IN_BATCH       = 9
SPOOL_ERROR                       = 10
CODEPAGE                          = 11
OTHERS                            = 12
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT itabcustmast.
CALL FUNCTION 'START_FORM'
   EXPORTING
ARCHIVE_INDEX          =
     form                   = 'ZRAMPROJSCRIPT'
     language               = sy-langu
STARTPAGE              = ' '
PROGRAM                = ' '
MAIL_APPL_OBJECT       =
IMPORTING
LANGUAGE               =
EXCEPTIONS
FORM                   = 1
FORMAT                 = 2
UNENDED                = 3
UNOPENED               = 4
UNUSED                 = 5
SPOOL_ERROR            = 6
CODEPAGE               = 7
OTHERS                 = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     element                        = 'MAINPAGE'
     function                       = 'SET'
     type                           = 'BODY'
     window                         = 'MAIN'
IMPORTING
PENDING_LINES                  =
EXCEPTIONS
ELEMENT                        = 1
FUNCTION                       = 2
TYPE                           = 3
UNOPENED                       = 4
UNSTARTED                      = 5
WINDOW                         = 6
BAD_PAGEFORMAT_FOR_PRINT       = 7
SPOOL_ERROR                    = 8
CODEPAGE                       = 9
OTHERS                         = 10
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear itabcallmast.
refresh itabcallmast.
SELECT * FROM zramcallmast INTO TABLE itabcallmast WHERE customerid = itabcustmast-customerid.
SORT itabcallmast by calltype.
TOTAL_CHARGE = 0.
LOOP AT itabcallmast.
Local Call : 1 Rupee per Minute.
STD : 1.5 Rupees Per Minute
International calls : 5 Rupees Per minute
hour = itabcallmast-CALLDURATION+0(2).
min = itabcallmast-CALLDURATION+2(2).
sec = itabcallmast-CALLDURATION+4(2).
CASE itabcallmast-calltype.
WHEN 'L'.
    CALL_CHARGE = ( ( hour * 60 * 60 ) + ( min * 60 ) + ( sec ) ) / 60.
WHEN 'S'.
    CALL_CHARGE = ( ( ( hour * 60 * 60 ) + ( min * 60 ) + ( sec ) ) * 2 ) / 60 .
WHEN 'I'.
    CALL_CHARGE = ( ( ( hour * 60 * 60 ) + ( min * 60 ) + ( sec ) ) * 5 ) / 60   .
ENDCASE.
CALL_CHARGE_STRING = CALL_CHARGE.
TOTAL_CHARGE = TOTAL_CHARGE + CALL_CHARGE.
    CALL FUNCTION 'WRITE_FORM'
     EXPORTING
       element                        = 'MAINPAGE'
       function                       = 'SET'
       type                           = 'BODY'
       window                         = 'MAIN'
IMPORTING
PENDING_LINES                  =
EXCEPTIONS
ELEMENT                        = 1
FUNCTION                       = 2
TYPE                           = 3
UNOPENED                       = 4
UNSTARTED                      = 5
WINDOW                         = 6
BAD_PAGEFORMAT_FOR_PRINT       = 7
SPOOL_ERROR                    = 8
CODEPAGE                       = 9
OTHERS                         = 10
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDLOOP.   " ************ itabCALLmast
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT                         =
EXCEPTIONS
UNOPENED                       = 1
BAD_PAGEFORMAT_FOR_PRINT       = 2
SPOOL_ERROR                    = 3
CODEPAGE                       = 4
OTHERS                         = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear itabcallmast.
ENDLOOP.   " ************** itabCUSTmast
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT                         =
RDI_RESULT                     =
TABLES
OTFDATA                        =
EXCEPTIONS
UNOPENED                       = 1
BAD_PAGEFORMAT_FOR_PRINT       = 2
SEND_ERROR                     = 3
SPOOL_ERROR                    = 4
CODEPAGE                       = 5
OTHERS                         = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

hi
good
check the following things-
1- Check the value for the field in the particular table,
2- Check the data you r passing from the driver program and the field that is printing the value in the sapscript screen.
3-check in the debug mode when the value is printing in the first row.
thanks
mrutyu

WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft. Now I cannot print at all. I get an error that says, "windows cannot print due to a problem with the current printer set up". I have tried reinstalling and a ton of other solutions to no avail. Can someone PLEASE Help!

Hello there, @jesseangelique ,
Welcome to the Community!
I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Also, let me know which Officejet 8500 Model you have:
HP Officejet Pro 8500 All-in-One Printer - A909a
HP Officejet Pro 8500 All-in-One Printer - A909b
HP Officejet Pro 8500 Premier All-in-One Printer - A909n
HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I have a brand new hp officejet 6700 premium e-all-in-one printer but my macbook pro is not detecting the printer to even install it or make a print can some one tell me if it is a problem with the printer or the macbook pro?

can some one help me with the question ..

no not at all..it was just tested if it was being detected on a windows os..it did..i am doubting either it is a problem with the router or the macbook pro....but earlier it did connect well to a hp officejet pro 8600 e-all-in-one printer over a different network(at someone else's house)...

Problem in the HP 510 printer

Similar Messages

Maybe you are looking for