Problem in the Table view of VC model

Hi all,
We have a created a table view using the BI query as source.
the table view has say 4 fields (Serial NO., Plant key, Material and Quantity) initially before submitting the parameters, once we enter some parameters and press submit button some extra fields are getting added at the end of the existing fields.
i.e the final result is Serial NO., Plant key, Material and Quantity, Plant, Material, Quantity. last 3 fields are undesired.
This is happening only when we select few fields in the define / Test Query setting (we are doing this to avoid unwanted fields while exporting data to excel).
Is there a way to avoid this addition of extra fields in the table view.
any help is highly appreciated.
regards,
Rk.

Hi
Are you getting these extra columns in 'Table' or while executing 'Define / Test Query'?
If you are getting this in table then dont select anything while dragging the table from query. (When the systems ask to select the fields) Select the fields after creating the table & then see what is happening.
Regards
Sandeep

Similar Messages

Problem with the table view's _visibleBounds when used on a scroll view

I've had numerous problems with getting a table view to work on a scroll view since the table view keeps resizing (http://discussions.apple.com/thread.jspa?threadID=2618816&tstart=0)
I have created the views in IB. The scroll view is attached to the controller's view, and is assigned as the controller's view. The frame size of the scroll view is 320x436. I am manually setting the content size in code:
UIScrollView* tempScrollView = (UIScrollView*) self.view;
tempScrollView.contentSize = CGSizeMake(320, 720);
The table view's frame's width/height is set to 280x88 in IB (i.e the size of two cells), and the header and footer are set to size 0.
However, when I run the code, the table view is smaller, it is only 280x68. I have looked in the debugger, and the table view's _contentSize (of its scroll view) is 280x88; however, the _visibleBounds property is 280x68.
I've tried looking into the documentation for the UITableView class, but can't find anything on the _visibleBounds property, or where it is being set and how to force it to the correct size.
If anybody has any advice, I'd appreciate it.

I can get around this problem by going to the scrollview which the tableview belongs to, and unchecking the Autoresize Subviews box.
But if anybody knows about the _visibleBounds property, or the rules which are applied when resizing subviews, I'd be interested.

Value coming from query is chaing in the Table view

Hi experts,
I am new to VC and developing a basic model by using a BI query as a data service.
I have a field "Project Code" which can return value numeric or alpha numeric or Character.
for example
Project Code= 14000000000000002782007 or
ATROVASTATIN
When i am right clicking the query and doing the test query function its displaying correctly but when i am draging from the output port of this query and using a Table view to display the data the numeric values like in our example "14000000000000002782007" is displaying as 1.4e+23 its displaying the same value where ever i have some numeric value in the field.
But its displaying the Char value right "ATROVASTATIN" as it is.
In the table view the field which is getting this value is with Datatype Text.
How can i solve this problem.
Thanks and regards
Neel

Hi Neel,
Have a look at this link,
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/sizeof_key+values&

Problem with maintain table views SM30 Transaction

Hello All,
i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
the ZIV_DP_PLCHAR_LA is the name of my table...
can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
SM30 "maintain table views: initial screen"
if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
to have a new screen?
thanks for all
Bilal

Hi
First delete the old table maintainence generator.
Now Recreate the screen and your table is good to go..
These error messages come when we add new fields and different version of the table maintainence generator in database.

The reference to the table, view or sequence is not allowed in this context

Hi,
I'm triying to execute the SP that I describe below and the OS give me an error:
CREATE OR REPLACE PROCEDURE DWARE.P_CSCV_AGR_MONTH_REVENUE
    TBL_NAME VARCHAR2,
    START_DATE DATE,
    RESULT_ OUT NUMBER
) AS
BEGIN
DECLARE
    v_tbl_name VARCHAR2(30);
    v_start_date DATE;
    v_result NUMBER := 0;
    v_select_aux VARCHAR2(32767) := ' ';
    v_temp_table VARCHAR2(30);
    v_exists NUMBER;
BEGIN
    v_tbl_name := TBL_NAME;
    v_start_date := START_DATE;
    v_temp_table := 'temp_' || v_tbl_name;
    SELECT count(*) INTO v_exists FROM tab WHERE lower(tname) = lower(v_temp_table);
    IF (v_exists = 1) THEN
      v_select_aux := '
        DROP TABLE ' || v_temp_table || ' CASCADE CONSTRAINTS PURGE
      EXECUTE IMMEDIATE (v_select_aux);
      COMMIT;
    END IF;
    v_select_aux := 'CREATE TABLE ' || v_temp_table || ' AS
                              SELECT ch.date_ month_revenue,
                                   s.date_sub month_sub,
                                   s.codpromoter,
                                   u.OPERATOR,
                                   SUM (ch.total) AS TOTAL_OK
                                   FROM cscv_sub_charges_' || to_char(v_start_date, 'YYYY_MM')|| ' ch
                                   INNER JOIN cscv_subs s
                                   ON ch.id_sub = s.ID
                                   INNER JOIN cscv_users u
                                   ON s.id_user    = u.ID
                            WHERE ch.STATUS = 0
                            GROUP BY ch.date_, s.date_sub, s.codpromoter, u.OPERATOR';
    EXECUTE IMMEDIATE (v_select_aux);
    COMMIT;
     v_select_aux := '
INSERT INTO ' || v_tbl_name || ' (
         month_revenue,
         month_sub,
         codpromoter,
         operator,
         TOTAL_0,
         TOTAL_1,
         TOTAL_2,
         TOTAL_3,
         TOTAL_4,
         TOTAL_5,
         TOTAL_6,
         TOTAL_7,
         TOTAL_8,
         TOTAL_9,
         TOTAL_10,
         TOTAL_11
        SELECT
         month_revenue,
         month_sub,
         codpromoter,
         operator,
         TOTAL_0,
         TOTAL_1,
         TOTAL_2,
         TOTAL_3,
         TOTAL_4,
         TOTAL_5,
         TOTAL_6,
         TOTAL_7,
         TOTAL_8,
         TOTAL_9,
         TOTAL_10,
         TOTAL_11
        FROM
           SELECT
              month_revenue,
              month_sub,
              codpromoter,
              operator,
              sum(total_ok) total_0,
              0 total_1,
              0 total_2,
              0 total_3,
              0 total_4,
              0 total_5,
              0 total_6,
              0 total_7,
              0 total_8,
              0 total_9,
              0 total_10,
              0 total_11
             FROM '|| v_temp_table ||'
          WHERE to_char(month_sub,''mm/yyyy'') = to_char(sysdate,''mm/yyyy'')
          GROUP BY month_revenue,month_sub,codpromoter, operator
          UNION ALL
          SELECT
              month_revenue,
              month_sub,
              codpromoter,
              operator,
              0,
              sum(total_ok),
              0,
              0,
              0,
              0,
              0,
              0,
              0,
              0,
              0,
              0
             FROM '|| v_temp_table ||'
          WHERE to_char(month_sub,''mm/yyyy'') = to_char((to_date(sysdate,''dd/mm/yy'') - INTERVAL ''1'' MONTH),''mm/yyyy'')
          GROUP BY month_revenue,month_sub,codpromoter, operator
        GROUP BY month_revenue,
         month_sub,
         codpromoter,
         operator
    EXECUTE IMMEDIATE (v_select_aux);
    v_result := v_result + SQL%ROWCOUNT;
    COMMIT;
    v_select_aux := '
      DROP TABLE ' || v_temp_table || ' CASCADE CONSTRAINTS PURGE
    EXECUTE IMMEDIATE (v_select_aux);
    COMMIT;
    RESULT_ := v_result;
END;
END P_CSCV_AGR_MONTH_REVENUE;
BEGIN
DWARE.P_CSCV_AGR_MONTH_REVENUE(CSCV_AGR_MONTH_REVENUE,'01/01/2010');
END;
/and the output is:
Error at line 1
ORA-06550: líne 2, column 32:
PLS-00357: The reference to the table, view or sequence 'CSCV_AGR_MONTH_REVENUE' is not allowed in this context
ORA-06550: líne 2, column 1:
PL/SQL: Statement ignoredwhat could I do to resove the problem??
Thanks in advance...

Hi,
Your procedure's signature is
CREATE OR REPLACE PROCEDURE DWARE.P_CSCV_AGR_MONTH_REVENUE
TBL_NAME VARCHAR2,
START_DATE DATE,
RESULT_ OUT NUMBER
) i.e. it is expecting two input parameters, TBL_NAME in VARCHAR2 format and the other START_DATE in DATE format. Also you need a variable with data type as NUMBER to hold the value of OUT parameter RESULT_
Now look at the way you are calling this procedure
BEGIN
DWARE.P_CSCV_AGR_MONTH_REVENUE(CSCV_AGR_MONTH_REVENUE,'01/01/2010');
END;
/first parameter has to be a VARCHAR2, so enclose CSCV_AGR_MONTH_REVENUE into single quotes.
second parameter should be a date, so use to_date() function.
Lastly declare a variable with data type as Number for holding value of out parameter RESULT_
Something like this :
declare
t_num number;
begin
a('CSCV_AGR_MONTH_REVENUE',to_date('01/01/2010','MM/DD/YYYY'),t_num);
dbms_output.put_line(t_num);
end;Vivek L

How to get the count of the entries in the table view

Hello experts,
         I have got a requirement where i need to display the total number of entries present in the table view, since the result comprises of several pages. This requirement is even applicable for the filter options in the table view i.e., if i use a filter it should count the total number of entries that satisfy the filter criteria.
Thanks in advance,
Vijayalakshmi

hi,
its simple,just place an input field in the layout and display the cpunt in that field.
for that do as below,
first in the layout of the page where you are giving tableview tab,in the next line give
<b><htmlb:inputField id="Count"
                  value="<%=ln%>"
                  disabled = 'X'/></b>
to display the count in that input field which is disabled.
and if i am mot wrong in the Initialization event, you are writing select query right to populate internal table.
after that write,
<b>describe table it_mara lines ln.</b>
and define this ln in page attributes as type i.
do award points f it helps u,
regards,
Message was edited by:
        sowjanya s

Is it able to refresh the table view automaticlly after trigger an event?

Hi expert,
I have one table view and a "Delete" button, each time when the user click the del button, it will delete the row which is selected via a RFC module in the backend, afterwards, I want this table view to be refreshed and read the real data from backend via another function module, is it possible? how could I do it?
Thanks and best regards

Let me do some summarize if my understanding is correct
1. Use a timer as "start" point of a table view, set the "interval" to be 0.05 minute
2. use the condition in the timer with a formula (BOOL(STORE@RETURN_CODE==0)).
3. If I trigger one event in the "table view", for example, a "Delete" event and it will return the result RETURN_CODE = 0 to datastore
4. Afterwards, if the time interval of the timer has been reached, 1st it will evaluate the value of the datastore and decide whether to refresh the table view.
Am I right?
Just as you mentioned before, it is not a perfect solution, as we may still wait for the timer to be triggered after a few seconds.
Thanks for your answer.

What are the tables/view used to Compute Dependecies Report

Hi,
what are the tables/views we have in APEX, which is used to create the Compute Dependecies Report
Home -> Application xxxxx > Application Reports > Shared Components > Database Object Dependencies
thanks,
Deepak

Hi Scott,
thanks for the quick response.
So my question is then...
I want to create a APEX Report which will give me the following information.
1. Application and all the Pages associated with it, which I am getting from apex_applications and
apex_application_pages. This is OK
2. List of all the Database Objects (Table/View) which the individual page is using, I mean relation between Page ID and database object. HOW to get that???.....(I want for each individual page, the list all the database objects (tables/views), which that page is using)
Thanks,
Deepak

How to view the tables/views available in Oracle

HI,
I am creating DB connection and importing the data from Oracle TABLES/ Views. I just want know how to view the tables/views available in Oracle. (I have the login details). Can I view thru TOAD? Pl let me know the best way and suggestions/ views / Links/ whitepagers.
Regards,

Hi,
I don't remember exacly: RSA1 -> source system -> "replicate datasources". Works this also in a DB-source system. I think so.
=> you get all tables that your user has authorisation.
This function execute for example (in oracle there are same information tables: dba_tables, user_tables ...) following select in the database:
select TABLE_NAME from DBA_TABLES;
Sven

Hide the table view in OBIEE 11g

Hi All,
The requirement is to hide the table view and display only the export link on the Dashboard. This could be achieved in 10g by inserting display:none CSS style in each column property. Tried the same in 11.1.1.3, the data is hidden but it still shows empty cells on the screen. Any thoughts?
Thanks,
Swati

Hi All,
I have got the following code. It works fine ane directly opens a excel with the data. But it does not pass the prompted value. How do i pass the value so that the exxcel contains filtered data?
<>div class="XUIPromptEntry minibuttonOn" ALIGN="left"> <> a href="saw.dll?Go&Path=%2Fshared%2FData Dump&Options=d&Action=download&Extension=.xls" >Download<>/a>"
Regards,
Swati

Read & Modify the table view data

Dear Experts,
CRM 7.0
I've added few extra custom fields to the table view through Workbench enhancment as AET does not work for my object type. Now, I would like to read the current table entries and accordingly i should fill the other columns. I am not sure how can I proceed. Please advise me asap.
Many thanks in advance.

Hi,
Yes I guess you can do it in DO_PREPARE_OUTPUT.
Use below code to read values from table:
DATA:      lv_wrapper         TYPE REF TO cl_bsp_wd_collection_wrapper,
        lr_entity          TYPE REF TO cl_crm_bol_entity,
     lv_attribute         type string,
     LV_ATTRIBUTE_VALUE type string
TRY.
      lv_wrapper = me->typed_context->ZCONTEXTNODENAME->get_collection_wrapper( ). " Here you will get all values from table into lv_wrapper
      CHECK lv_wrapper IS BOUND.
      lr_entity ?= lv_wrapper->get_first( ). " Loop at table
      WHILE lr_entity IS BOUND.
        lv_attribute ?= lr_entity->get_property_as_string( 'ATTRIBUTE NAME' ). " TO read perticular attribute
*OR as per your requirement you can change the value. Here you can write your logic...
     lr_entity->set_property_as_string( iv_attr_name = 'ATTRIBUTE NAME' iv_value = LV_ATTRIBUTE_VALUE ). " Change attribute property
      lr_entity ?= lv_wrapper->get_next( ).
     ENDWHILE.
    CATCH cx_root.
      RETURN.
ENDTRY.
Please let me know if it helps.
Regards,
Bhushan

How to not display the column header in the table view?

I do not want to display the column header in the table view, how can I achieve it?

If you're using JavaFX 8 you can use the following in an external style sheet:
.table-view .column-header-background {
-fx-pref-height : 0 ;
If you're using JavaFX 2.2, the -fx-pref-height attribute is not available in css, so I think you have to resort to a lookup:
final Region tableHeader = (Region)table.lookup(".column-header-background");
tableHeader.setPrefHeight(0);
As always, I feel obliged to point out that I don't really like lookups. Sometimes they seem to be the only way, though.

Adjusting the table view in cProjects

Hi,
The table view for cProjects include a lot of columns. I want to change the table view for all users. Have any of you done this, and if can you give me a description on how to do it.
Thanks, Camilla

My team found a solution for this, you need to enter cProjects with Webdynpro admin rights,
Access cProjects in standalone mode, after login append "SAP-CONFIG-MODE=X" at the end of the URL like below
http://<appserver>:<port>/sap/bc/webdynpro/sap/cprojects?sap-client=345&sap-language=EN&SAP-CONFIG-mode=X and refresh.
Select any project go to the table view and right click you will get option as "Setting for current configuration", you can change the no of columns to appear here. Award points.
Thanks
Pugazh
[email protected]

Problem with the table control BDC in FV60 transaction

Hi All,
I got the problem with the table control in FV60 transaction.
This is working for 900 line items.After 900 line items it is giving the problem like it is 1000th line item.You can post only 999 line items.
I know we can post only 999 line items,but in my file only 920 line items.
Please give me solution,if anybody come across this situation.
Thanks & regards,
rakesh.

Hello Rakesh ,
your file may have only 920 line items , but based on those line items, SAP may create few more new lines ( based on the clearing recon accounts , inter company transaction ...etc )...
regards
Prabhu

Problem in the table maintainance generator of View J_3RFV_F4VERS

Hi All,
I have a problem with View J_3RFV_F4VERS (SAP standard table for Russia).
Currently i am not able to change the entries in this View through SM30. Currently in the Table maintainance generator of this view "Standard recording Routine" is selected as Recording Routine.
But when i change this to "no, or user, recording Routine", i am able to change the entries of this view through SM30.
I would like to know the impact of selecting the alternative Recording Routine. Will it have any adverse impact?
Please throw some light on this issue.
Regards,
Navin.

Use Events in Table Maintainence Generator.
Environment-->Modification --> Events
U can write a subroutine which can be called to increment the numbers .

Problem in the Table view of VC model

Similar Messages

Maybe you are looking for