Problem in total PO qty in print out of PO

Hi Gurus,
I'm creating a PO with discount for example i use HB01 (header discount) the original PO qty is 10 pcs after saving and printing of PO the PO qty only show 1 pc only, can u tell me why these happen? can you suggest a solution to fixed these issue?
when there's no discount in PO the total PO qty in print output it's ok, there's no problem.
Hoping to your answer.
Thanks,
Marina

HI sujeet,
Thanks for ur response. i had already checked the printer settings.. i think there is no problem with this. Can u Please suggest something else. thanks
Hiii jyojit..
Thanks for reply. I had already checked the said check box in spool admin. but the problem still exists. Please suggest something to get rid of the problem.

Similar Messages

A serious problem with AAR 5.0 in printing out a book

I have written a book in MS Word 2000 and I converted it in a PDF file with AR 5.0
Then I tried to print it out as a book.
I rotated the pages and included two A4 pages in one so that an A4 sheet to have 4 pages on both sides.
In order to do this trick, I rotated the horizontal text page
to vertical position on the left side for printing out the page 1 and on the right side for printing out the page 2. This must be done in order to have the 4 pages printed out in a sequence and in an A4 sheet.
The procedure is as follows:
First, I print out the page one (1) while having my PDF text page rotated vertically on the left side and the printing out is successful.
Then I rotate again the page vertically to face on the right side to print out the page two (2) in the same sheet.
Here is where the problem begins.
The page 1 is printed out well BUT its top/bottom margin is different than the page 2, which is printed in a lower position on the A4 sheet.
The margins all around the page look perfect but the two of them are printed out with one line lower that makes one page higher or lower than the other and not in a straight line as it is supposed to be.
I have tried to find out what causes this problem with no success so I am into contact with you requesting an immediate help. I know that it is a small but serious problem particularly for my case as an author and I believe that the solution can be given only by an expert of Adobe Acrobat 5.O
Please, inform me about any adjustment that must be done to solve this margin situation (problem) as I know that AAR 5.0 is an excellent software and can do this work for me.
Regards,
Emmanouel

This has nothing to do with Adobe's OpenType development tools, which is the purpose of this forum. I think you need to post this in the Acrobat Windows forum!
Regards,
T

Do not show total price of po in pdf print out

Dear expert,
i am going to make a print out of po but in po it shows item wise value, but not show total price at the end of item,this problem is
particularly for this po only. please help to solve this issue

Please check in table EKPO against fields NETWR, BRTWR - if the net value or gross value in this certain PO are populating or not.
Regards,
Ahmad Farhan Khalid

Problem in Print Out of ALV report

Dear All..
I am trying to take print out of an ALV report. there are 36 columns in my report. when i try to take print out, warning appears which says system cannot print the last 277 columns of report.
i have tried using different formats for printer like :
Format                  Description
X_PAPER                 ABAP/4 list: Default list formatting
X_SPOOLERR          ABAP list: Spooler problem report
ZX_65_284               65 Rows and 285 Columns
X_65_255                ABAP/4 list: At least 65 rows with a maximum number of c
X_65_200                ABAP list: at least 65 lines with 200 columns (not for a
X_58_170                ABAP/4 list: At least 58 rows by 170 columns
X_65_132                ABAP list: At least 65 rows by 132 columns
X_90_120                ABAP list: At least 90 rows by 120 columns
X_44_120                ABAP/4 list: At least 44 rows by 120 columns
X_65_80                 ABAP/4 list: At least 65 rows by 80 columns
but every time the same message appears even on A3 size paper..
i am using REUSE_ALV_GRID_DISPLAY to display ALV.
Please help to to take out prints(can be in condensed mode) so that all columns appear on the print out..

HI sujeet,
Thanks for ur response. i had already checked the printer settings.. i think there is no problem with this. Can u Please suggest something else. thanks
Hiii jyojit..
Thanks for reply. I had already checked the said check box in spool admin. but the problem still exists. Please suggest something to get rid of the problem.

Problem printing out to a parallelport printer

Hello, I am using the javax.comm.*; package and I am having problems
printing to the parallelport.
Well, it prints out the string but the problem is that the light for paper feed
starts blinking eventhough there is paper , once I click the paper feed button
the printer then prints out the string.
So, basically, everything is ok, apart from that I have to press the paper feed
button for each time I want to print something.
There is an error in my code somewhere, but as I am new to port communications I cannot understand what to do.
Below is my code, please help.
Thanks!
public void print(String s){
Enumeration ports;
CommPortIdentifier portId;
     try{
          portId = CommPortIdentifier.getPortIdentifier("LPT1");
         addPort(portId,s);
     }catch (NoSuchPortException e){
                 e.printStackTrace();
public static void addPort(CommPortIdentifier portId,String s){
     try{
          ParallelPort port = (ParallelPort)portId.open("LPT1",2000);
        /*port.notifyOnError(true);
        port.notifyOnBuffer(true);
        port.addEventListener(new ParallelPortEventListener(){
               public void parallelEvent(ParallelPortEvent ppe){
                       System.out.println(ppe.toString());
                       System.out.println("An event has occured");
          try{
               OutputStream os = port.getOutputStream();
               if(os == null){
                    System.out.println("Os is null");
               else{
                      os.write(s.getBytes());
               //os.flush();
          catch(Exception eis){
               eis.printStackTrace();
          port.close();
     catch(PortInUseException e){
          System.out.println(e.currentOwner);
          e.printStackTrace();
     catch(Exception ecl){
          ecl.printStackTrace();
}Of course this class imports :
import java.util.Enumeration;
import javax.comm.*;
import javax.comm.CommPort;
import javax.comm.CommPortIdentifier;
import javax.comm.ParallelPort;
import javax.comm.NoSuchPortException;
import javax.comm.PortInUseException;
import java.io.*;

Wow - I wonder how the OP thought that the
Developers Home > Developer Forums > Java Forums >
Java Mobility Forums > Consumer and Commerce >Consumer and Commerce General >
Forum was a correct choice for this problem??It's the same logic that leads one to believe that being new to port communications omits them from the responsibility of using general troubleshooting techniques to isolate/identify a problem.
This logic often leads to obscure questions also, sadly.

Invoice Print out problem

Hi Gurus,
In my invoice there are 4 line items.only last two line items are taxable and in print out system has to display the text on below four items.Currently its showing the text as " CA Tax-GST 5% of 7,800.00 CAD which is wrong, as its showing the total value of all the four items, It has to display the text in this format " CA Tax-GST 5.% of 1900 CAD which is total of two taxable line items .
We are using SAP scripts. Please let me know where I have to done the changes to show the text in above format.
Regards,
Hari Challa.

Hi,
First find out the output type to print the invoice and using this o/p type find the print program and layout name. Then copy the print program do the necessary modifications and assain the new program in o/p type.
Regards,
Jagadeesh.

Problem report only print out when i click back button

hi all..i having problem with my report print program. the problem is my report did not immediately print out when i click print button. the program require me to click back button before print out execute. please help me to solve this problem. Thank you.
Edited by: padile on Jan 7, 2010 3:51 AM

Hi,
In your program, mention the following:
DATA: gs_out_opt TYPE ssfcompop.
gs_out_opt-tdimmed = 'X'           "Print immediately
CALL FUNCTION lv_fname         "Smartform FM
      EXPORTING
        output_options     = gs_out_opt
Regards,
Dawood.

ALV Report with Logo .. Print Out Problem

Hello Guys..
I am facing and differerent problem , I have created one Report in ALV contain logo of my company and some other details as per selection screen.
At the time of taking printoput the logo is not coming in print out only report data is coming.
How I take logo and ALV report in one print out .
Please do the needful.
Regards
Swati....

We Can't take logo of ALV in print out.

Alv report Print out Problem

Hi Experts,
I am having problem while taking print out of Alv report format. In that report, 1 column contains Unit Values.
Eg. Unit value - 'LE' , AFTER USING CONVERSION EXIT LOGIC it is converted into 'AU' which is finally displayed in the Alv -Report display format.
while taking Print-out of that report , that field Unit Value 'AU' is Shown in this format "****'.
Please give me your Valuable Suggestions.
Thanks and Regards
BalaNarasimman M

while defining filed catalog define the data type also
clear l_fieldcat.
l_fieldcat-fieldname = 'MEINS'.
l_fieldcat-datatype = 'UNIT'.
l_fieldcat-no_out = ' '.
l_fieldcat-do_sum = 'X'.
l_fieldcat-seltext_l = 'UOM'.
append l_fieldcat to p_fieldtab.
may be it would help.
anya

VF02 Print Out Problem

Hi all,
We are facing the problem while taking the print out from VF02.
We are using ZFORM designed by our ABAPer.
While using standard form (LB_BIL_INVOICE) its working and while using ZFORM, we are able to see the print preview but not able to take the print out.
Error message is shown as given below
"Output could not be issued"
Message no. VF304
Diagnosis
An error occurred while output was being issued. It is possible, for example, that the form to be issued has not been activated or has an error. An error may also have arisen while the data to be issued was being edited.
Procedure
Check possible causes of the problem.
Thanks in advance,
Babs

Hi babs
Go to VV32 and check wheather the condition record has been maintained or not.In VV32 .
check the access sequence , wheather it is billing type / payer in your output type RD00 .so only for that particular payer only that ouput may be generating . .But also see in the V/40 wheather for the billng type the ZFORM which you have created has been assigned or not .
Regards
Srinath

Problem in print out of Dynamic ALV

Hi ,
I am using dynamic ALV to address a requirement. The ALV is working fine and the output is also coming corretly, even in spool.
But if the width of dynamic table exceeds a limit, then nothing is coming in the print out.
If anyone has faced similar problem or knows how to tackle this problem, please advise what can be done here.
Thanks,
Sonal

Hi,
Can you try to increase field with to maximun as per your requirement.
Regards,
Sai

Why won't my printer (Brother HL2270DW) print out Elements User bi-monthly magazine? Screen says PDF format not supported or printer not connected (it is) or shows an empty screen. No other printing problems on any website.

Why won't my printer (Brother HL2270DW) print out Elements bi-monthly magazine. Screen says either printed not connected (not true) or PDF not supported of shows a blank document. No problems printing on any other website.

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

I have a problem printing out my contact book.

I have and iMac with Mountain Lion. My pbroblem is printing out my contact book of 102 contacts. The contact book is arranged alphabetically by last name, but when I print it, it is printed in a random order. What is my problem and what shoulld I be doing to correct this problem?

Please describe the problem. No one can help you unless you tell us what the problem is.

Print out problem

hi!
I have a little problem with print out.
I want to print out like this:
about two cm space between each number.
I have 4 columns and 4 rows
for(){
System.out.println(a+" "+b+" "+ d+" "+e);
}How do I write?

I think that you mean *\t*. :)
So the code would become:
System.out.println(a + "\t\t" + b + "\t\t" + d + "\t\t" + e);{code}
OR
{code}System.out.printf("%d\t\t%d\t\t%d\t\t%d", a, b, d, e);{code}

Problem in print out with English characters (THANGSAN font)

Save Our Environment. Save Yourself.
Hi Experts!!
I have created a smartform and print program which should actually print some Thai characters and English characters too. I created a smartstyle and have some 10 paragraph formats and are all have THANGSAN font. So, I am printing all the thai and english characters in THANGSAN font only.
When print preview is seen, the output is very fine, but when being printed, the thai characters are appearing fine but the english characters' font is being changed to somehting else (courier or arial). Why is this happening so? Because of this, all the output is being merged and looking very weird.
The smartform is created in EN and is translated to all languages. All user has logged on to SAP in EN language.
Can somebody please help me out with whether the problem is with THANGSAN or the printer?
P.S. The smartform is actually similar to the standard script Z_RVINVOICE01 in which only THANGSAN is used.
- I'm not an environmentalist. I'm an Earth warrior.

Save Our Environment. Save Yourself.
Can anybody please help me out?
Thanks a lot.
- I'm not an environmentalist. I'm an Earth warrior.

Problem in total PO qty in print out of PO

Similar Messages

Maybe you are looking for